Worldwide distributor of NSN parts and consumables located in the USA.
A polymeric compound preparation, compounded of synthetic or nonsynthetic ingredients, generally excluding wax, designed to provide a protective coating and polish or shine on floors. It provides great durability, low dirt retention, and slip-resistance. It is designed for use on composition floors, such as rubber, asphalt, vinyl tile, or linoleum. It may also be used on well-sealed wooden floors. Excludes wax, general purpose, solvent type; and wax, floor, water emulsion type.
Send us a request for quote using the form below. Our team will contact you with an up to date pricing and availability quote ASAP.
Polishes, creams and similar preparations for the maintenance of wooden furniture, floors or other woodwork
Polishes, creams and similar preparations (except artificial and prepared waxes), for the maintenance of wooden furniture, floors and other woodwork
Other consumer nondurables
Y - Indicates information is in the hazardous materials information resource system (hmirs).
PMICA - Item does not contain precious metal.
CRITL- The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Questions & Answers: |
|
What are the historical prices recorded for this stock number? | |
Historical data shows pricing from $400.95 to $668.25.. | |
Does NSN 7930-01-131-5648 have a shelf life? | |
No. There is no shelf life applicable for this NSN. | |
What NATO entities are users of this NSN? | |
Veterans Administration, and Spain | |
What is the NIIN of NSN 7930-01-131-5648? | |
011315648 or 01-131-5648 | |
Does NSN 7930-01-131-5648 require demilitarization? | |
Yes - ITAR Controlled | |
What is the most recent solicitation for NSN 7930-01-131-5648? | |
No solicitations for this NSN. | |
When was this national stock number assigned to the federal catalog? | |
May 12, 1982 |
Ld50 lc50 mixture: none specified by manufacturer.
routes of entry: inhalation: no skin: no ingestion: yes
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: inhal/skin/eye: none known. Ingest:
may cause mild irritation of the gastrointestinal tract.
explanation of carcinogenicity: not relevant
effects of overexposure: see health hazards.
medical cond aggravated by exposure: none specified by manufacturer.
First aid: inhal: remove to fresh air. Support brthg (give o*2/artf resp)
. Skin: wash exposed areas thoro w/soap & water. Eye: immed flush
w/plenty of low press water. Remove cont lenses to insure a thoro
fl ush & continue to flush w/water for at least 15 mins. If irrit
persists, get med attn. Ingest: drink several glasses of water to
dilute the ingested matl. Do not induce vom. Consult md (supp data)
Vapor density: >1
spec gravity: 1.028
ph: 8.6
solubility in water: miscible
appearance and odor: thin, semi-transparent, off-white liquid.
percent volatiles by volume: 20
Stability indicator/materials to avoid: yes
acids.
stability condition to avoid: keep from freezing.
hazardous decomposition products: none known.
Waste disposal methods: dispose of in accordance w/local, state &
federal regulations.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: ethanol, 2-(2-methoxyethoxy)-; (diethylene glycol
monomethyl ether)
cas: 111-77-3
rtecs #: kl6125000
fraction by wt: 1.6%
ingred name: ethylene glycol
cas: 107-21-1
rtecs #: kw2975000
fraction by wt: 1.5%
osha pel: 50 ppm, c
acgih tlv: 50 ppm, vapor, c
epa rpt qty: 1 lb
dot rpt qty: 1 lb
ingred name: water
cas: 7732-18-5
rtecs #: zc0110000
ingred name: acrylic polymer (emulsion)
ingred name: rosin (polyester)
cas: 68442-80-8
ingred name: polyethylene emulsion
ingred name: ethanol, 2-(2-methoxyethoxy)-; (diethylene glycol
monomethyl ether)
cas: 111-77-3
rtecs #: kl6125000
Ld50 lc50 mixture: none specified by manufacturer.
routes of entry: inhalation: no skin: no ingestion: yes
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: acute: ingestion: may be harmful if
swallowed. Inhal/eye/skin: none known. One of the ingredients in
this product (1.6%), in its pure form, has been rptd to cause
adverse efts on kidney & liver in lab an imals when expos to high
levels. These efts are considered to have no relevance to human
expos (efts of overexp)
explanation of carcinogenicity: not relevant.
effects of overexposure: hlth haz: during normal use of this product.
medical cond aggravated by exposure: none known.
First aid: inhal: remove to fresh air. Support breathing (give o*2/artf
resp) . Skin: wash thoro w/soap & water. Eyes: flush thoro with water
for @ least 15 minutes. Ingest: drink 1-2 glasses of water to dilut
e product. Induce vomiting by touching back of throat w/finger.
call physician.
Vapor density: >1
spec gravity: 1.028
ph: 8.6
evaporation rate & reference:
solubility in water: miscible
appearance and odor: light tan, thin, semi-transparent liquid
Stability indicator/materials to avoid: yes
acids.
stability condition to avoid: none known.
hazardous decomposition products: none known.
Waste disposal methods: dispose of in accordance with local, state and
federal regulations.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: phthalic acid, benzyl butyl ester; (butyl benzyl phthalate)
(sara 313) (cercla)
cas: 85-68-7
rtecs #: th9990000
fraction by wt: 0.83%
osha pel: n/k
acgih tlv: n/k
epa rpt qty: 100 lbs
dot rpt qty: 100 lbs
ingred name: ethanol, 2-(2-methoxyethoxy)-; (diethylene glycol
monomethyl ether)
cas: 111-77-3
rtecs #: kl6125000
fraction by wt: 1.6%
osha pel: n/k
acgih tlv: n/k
ingred name: ethylene glycol (sara 313) (cercla)
cas: 107-21-1
rtecs #: kw2975000
fraction by wt: 1.5%
acgih tlv: c 50 ppm, vapor
epa rpt qty: 1 lb
dot rpt qty: 1 lb
ingred name: ethanol, 2-butoxy-, phosphate(3: 1); (tributoxyethyl
phosphate)
cas: 78-51-3
rtecs #: kj9800000
fraction by wt: 1.34%
osha pel: n/k
acgih tlv: n/k
ingred name: water
cas: 7732-18-5
rtecs #: zc0110000
osha pel: n/k
acgih tlv: n/k
ingred name: acrylic polymer; (acrylic polymer emulsion)
osha pel: n/k
acgih tlv: n/k
ingred name: 2-butenedioic acid; (rosin polyester)
cas: 68442-80-8
osha pel: n/k
acgih tlv: n/k
ingred name: polyethylene emulsion water base; (polyethylene emulsion)
osha pel: n/k
acgih tlv: n/k
Ld50 lc50 mixture: none specified by manufacturer.
routes of entry: inhalation: no skin: no ingestion: yes
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: inhalation: none known. Skin: none
known. Eyes: none known. Ingestion: may be harmful if swallowed. One
of ingredients in this product (1.6%), in its pure form, has been
reported to cause adverse effects on the kidney and liver in
laboratory animals when exposed to high levels. These effects are
considered(efts of overexp)
explanation of carcinogenicity: not relevant
effects of overexposure: hlth haz: to have no relevance to human exposure
during normal use of this product.
medical cond aggravated by exposure: none known.
First aid: inhal: remove to fresh air. Support breathing (give o*2/artf
resp) . Skin: wash thoroughly w/soap & water. Eyes: flush thoroughly
w/water for at least 15 minutes. Ingest: drink one or two glasses of
water to dilute product. Induce vomiting by touching back of
throat w/finger. Call md.
Hcc: t6
vapor density: >1
spec gravity: 1.028
ph: 8.6
evaporation rate & reference:
solubility in water: miscible
appearance and odor: light tan, thin, semi-transparent liquid.
percent volatiles by volume: 20
Stability indicator/materials to avoid: yes
acids.
stability condition to avoid: none known.
hazardous decomposition products: none known.
Waste disposal methods: dispose of i/a/w local, state & federal
regulations.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: ethanol, (2-(2-methoxyethoxy)-; (2-(2-methoxyethoxy)
ethanol)
cas: 111-77-3
rtecs #: kl6125000
fraction by wt: 1.6%
osha pel: n/k
acgih tlv: n/k
ingred name: ethylene glycol (sara 313) (cercla)
cas: 107-21-1
rtecs #: kw2975000
fraction by wt: 1.6%
osha pel: n/k
acgih tlv: 50 ppm, vapor, c
epa rpt qty: 1 lb
dot rpt qty: 1 lb
ingred name: water
cas: 7732-18-5
rtecs #: zc0110000
osha pel: n/k
acgih tlv: n/k
ingred name: acrylic copolymer; (acrylic copolymer emulsion)
osha pel: n/k
acgih tlv: n/k
ingred name: polyethylene emulsion
osha pel: n/k
acgih tlv: n/k
First aid: skin: in keeping with good hygienic practices, wash thoroughly
with soap and water. Eyes: as is the case when any foreeign material
contacts the eye, flush thoroughly with water. Ingestion: contact
a p hysician.
Boiling pt: b.P. Text: none
melt/freeze pt: m.P/f.P text: none
decomp temp: decomp text: none
vapor density: air=1: >1
spec gravity: 1.023
ph: 8.6
evaporation rate & reference:
solubility in water: (h2o): miscible
appearance and odor: off-white, thin translucent liquid
Stability indicator/materials to avoid: yes
acids
stability condition to avoid: none
hazardous decomposition products: none
conditions to avoid polymerization: will not occur.
Waste disposal methods: dispose of in accordance with local, state and
federal regulations.
Ingred name: diethylene glycol monoethyl ether
cas: 111-90-0
rtecs #: kk8750000
= wt: 4.