Secure Ordering: +1 (757) 528-8028
NationalStockNumber.info
NationalStockNumber.INFO

Worldwide distributor of NSN parts and consumables located in the USA.

Undercoat Paint

NSN: 8010-00-079-9515 | Model: 2572286-1
NSN Properties and Flags
NATO Stock Number
8010-00-079-9515
DEMIL
NO
Criticality Code Justification
Feat
Part Name Assigned By Controlling Agency
Inavy - paint, undercoat, whit
Special Features
Items are being coded as critical to insure source inspection will be performed at the point of manufacture, prior to material receipt by the us navy or other dod components. These items are piece parts or end items in support of vital military hardware necessary to sustain the successful mission of the ships, submarines, and shore stations of the us navy. Critical features including, but not limited to, dimensions, tolerances/clearances, electronic characteristics, and metallurgical properties will bespecified for government q ar (quality assurance representatives) to insure the highest possible degree of quality and reliability of these parts being delivered under navicp contracts

Pricing and Availability

Send us a request for quote using the form below. Our team will contact you with an up to date pricing and availability quote ASAP.

Qty:
Email Address:
Phone Number:
Your name:
Company:
Privacy    Terms

Certified Quality Assurance  Quality check icon

  •   ISO 9001:2015 + AS9120B
  •   Counterfeit Parts Prevention
  •   100% Product Inspections
  •   7 Year Record Retention
  •   On Time Delivery
  •   HAZMAT Certified
  •   Worldwide Shipping

NSN 8010-00-079-9515 Datasheet

Supply Class (FSC):
Related Products Varnishes Dopes Paints
Cross Reference:
  • 2572286-1
  • P0LYEP804
  • 2572286-1
Cage Codes:
  • Navair and Navsea Managed (CAGE 10001)
  • Valspar Corporation (CAGE 13418)
  • Naval Air Systems Command (CAGE 30003)
Identification:
HMIC

Y - Indicates information is in the hazardous materials information resource system (hmirs).

PMIC

A - Item does not contain precious metal.

ADPE

- Represents items with no adp components

CRITL

- The item is a non-aviation critical safety item (csi) whose failure will result in serious damage to equipment or serious injury or death to personnel.

Freight Information:
  • NMFC:

    149980 - Paint and related materials

  • WCC:

    621 - Paint

  • SHC:

    9 - Other or no special handling required (sh)

  • ADC:

    A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

  • ACC:

    C - Chemical corps items and all other chemicals not covered in other classificatons. note: when an item has a chemical proper shipp

  • TCC:

    R - Flammable liquids, un class 3 (flammable liquids label)

  • LTL:

    W - Rating variable

Questions & Answers:

What are the historical prices recorded for this stock number?
No pre-dated pricing for this NSN could be found.
Does NSN 8010-00-079-9515 have a shelf life?
No. There is no shelf life applicable for this NSN.
What NATO entities are users of this NSN?
No recorded entities for this stock number.
What is the NIIN of NSN 8010-00-079-9515?
000799515 or 00-079-9515
Does NSN 8010-00-079-9515 require demilitarization?
Yes - ITAR Controlled
What is the most recent solicitation for NSN 8010-00-079-9515?
No solicitations for this NSN.
When was this national stock number assigned to the federal catalog?
Dec 06, 1967
MSDS

Material Safety

MSDS BJRKF 4 UNDERCOAT PART A

Hazards

Ld50 lc50 mixture: none specified by manufacturer.

routes of entry: inhalation: yes skin: no ingestion: no
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: eye: irritating and may injure eye
tissue if not removed promptly. Skin: may irrit & cause dermatitis.

inhal: may cause difficulty of breathing, dizziness and headaches.

as a precaution, exposure to liqu ids, vapors, mists or fumes
should be minimized. Potential for nervous system, kidney or liver
damage.

explanation of carcinogenicity: not relevant
effects of overexposure: see health hazards.

medical cond aggravated by exposure: respiratory disorders and skin
allergies.

First Aid

First aid: eye: immed flush w/large amounts of water for at least 15
minutes. If irrit persists, get md. Skin: wash thoroughly w/soap and
water and remove any contaminated clothing. Get md if irrit
persists. Inhal : move to fresh air. If breathing irregular or has
stopped, start resuscitation, administer oxygen if available. Get
md immed. Ingest: get md immed.

Chemical Properties

Boiling pt: b.P. Text: 237f,114c
vapor pres: 25.0
vapor density: hvr/air
spec gravity: 1.46
evaporation rate & reference:
appearance and odor: liquid paint
percent volatiles by volume: 29.6

Reactivity

Stability indicator/materials to avoid: yes
contact with strong oxidants.

stability condition to avoid: reaction with some epoxy resins/curing
agents may produce considerable heat.

hazardous decomposition products: toxic fumes including carbon monoxide,
carbon dioxide.

Proper Disposal

Waste disposal methods: dispose i/a/w federal, state and local
regulations. Drums should be either reconditioned by certified
firms or properly disposed of by approved firms.

disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.

Ingredients List

Ingred name: methyl isobutyl ketone (sara iii)
cas: 108-10-1
rtecs #: sa9275000
fraction by wt: 5%
osha pel: 100 ppm/75 stel
acgih tlv: 50 ppm/75 stel; 9293
epa rpt qty: 5000 lbs
dot rpt qty: 5000 lbs

ingred name: xylenes (o-,m-,p- isomers) (sara iii)
cas: 1330-20-7
rtecs #: ze2100000
fraction by wt: 20%
osha pel: 100 ppm/150 stel
acgih tlv: 100 ppm/150stel;9192
epa rpt qty: 1000 lbs
dot rpt qty: 1000 lbs

ingred name: aluminum hydroxide
cas: 21645-51-2
rtecs #: bd0940000

ingred name: bisphenol a epichlorohydrin resin (mfr gives 15 mg/m3 as
pel and 10 mg/m3 as tlv)
cas: 25036-25-3

ingred name: calcium carbonate (marble) (limestone)
cas: 1317-65-3
rtecs #: ev9580000
osha pel: 15 mg/m3 tdust
acgih tlv: 10 mg/m3 tdust; 9192

ingred name: methyl isoamyl ketone
cas: 110-12-3
rtecs #: mp3850000
osha pel: 100 ppm
acgih tlv: 50 ppm; 9293

ingred name: silicon dioxide (amorphous)
cas: 112945-52-5
rtecs #: vv7310000

ingred name: talc (containing no asbestos)
cas: 14807-96-6
rtecs #: ww2710000
osha pel: 2 mg/m3 rdust
acgih tlv: 2 mg/m3 rdust; 9192

ingred name: titanium dioxide
cas: 13463-67-7
rtecs #: xr2275000
osha pel: 15 mg/m3 tdust
acgih tlv: 10 mg/m3 tdust; 9293

MSDS BJRKG 4 UNDERCOAT PART B

Hazards

Ld50 lc50 mixture: none specified by manufacturer.

routes of entry: inhalation: yes skin: no ingestion: no
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: eye: irritating and may injure eye
tissue if not removed promptly. Skin: may irritate and cause
dermatitis. Inhal: may cause difficulty of breathing, dizziness, and
headaches. As a precaution, exposure t o liquids, vapors, mists or
fumes should be minimized. Potential for nervous system, kidney or
liver damage.

explanation of carcinogenicity: not relevant
effects of overexposure: see health hazards.

medical cond aggravated by exposure: respiratory disorders and skin
allergies.

First Aid

First aid: eye: immed flush w/large amounts of water for at least 15
minutes. If irrit persists get md. Skin: wash thoroughly w/soap and
water and remove any contaminated clothing. See md if irrit
persists. Inhal: move to fresh air. If breathing is irregular or
has stopped, start resuscitation, administer oxygen if available.

call md immed. Ingest: see md immed.

Chemical Properties

Boiling pt: b.P. Text: 237f,114c
vapor pres: 25.0
vapor density: hvr/air
spec gravity: 1.38
evaporation rate & reference:
appearance and odor: liquid paint
percent volatiles by volume: 31.6

Reactivity

Stability indicator/materials to avoid: yes
contact with strong oxidants.

stability condition to avoid: reaction with some epoxy resins/curing
agents may produce considerable heat.

hazardous decomposition products: toxic fumes including carbon monoxide,
carbon dioxide.

Proper Disposal

Waste disposal methods: dispose i/a/w federal, state and local
regulations. Drums should be either reconditioned by certified
firms or properly disposed of by approved firms.

disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.

Ingredients List

Ingred name: ethyl benzene (sara iii)
cas: 100-41-4
rtecs #: da0700000
fraction by wt: 1%
osha pel: 100 ppm/125 stel
acgih tlv: 100 ppm/125stel 9192
epa rpt qty: 1000 lbs
dot rpt qty: 1000 lbs

ingred name: xylenes (o-,m-,p- isomers) (sara iii)
cas: 1330-20-7
rtecs #: ze2100000
fraction by wt: 30%
osha pel: 100 ppm/150 stel
acgih tlv: 100 ppm/150stel;9192
epa rpt qty: 1000 lbs
dot rpt qty: 1000 lbs

ingred name: propylene glycol monomethyl ether
cas: 107-98-2
rtecs #: ub7700000
osha pel: 100 ppm/150 stel
acgih tlv: 100 ppm/150stel;9192

ingred name: calcium carbonate (marble) (limestone)
cas: 1317-65-3
rtecs #: ev9580000
osha pel: 15 mg/m3 tdust
acgih tlv: 10 mg/m3 tdust; 9192

ingred name: talc (containing no asbestos)
cas: 14807-96-6
rtecs #: ww2710000
osha pel: 2 mg/m3 rdust
acgih tlv: 2 mg/m3 rdust; 9192

ingred name: titanium dioxide
cas: 13463-67-7
rtecs #: xr2275000
osha pel: 15 mg/m3 tdust
acgih tlv: 10 mg/m3 tdust; 9293