Secure Ordering: +1 (757) 528-8028
NationalStockNumber.info
NationalStockNumber.INFO

Worldwide distributor of NSN parts and consumables located in the USA.

Epoxy Coating Kit

NSN: 8010-00-082-2436 | Model: MIL-PRF-22750
ITAR Registered seal

A finish coat material composed of a base compound and an accelerator. The base material consists of an epoxy resin which is a reaction product of epichlorohydrin. The activator is normally a polyamide, polyamine, or similar compound. Usually, for colored epoxy finishes, only the base material contains pigment or dye, but both base and activator may be colored. The material may also be furnished with pigment separate from both base compound and accelerator.

NSN Properties and Flags
NATO Stock Number
8010-00-082-2436
DEMIL
Yes - ITAR Controlled (Code B)
Application Method
Spraying as is or spraying after thinning
Quantity Within Each Unit Package
2.000 gallons
Content Within Each Unit Package
Consists of component a (epoxy resin and solvents) and component b (polyamide and/or amine resin and solvents) to equal 2 gallons
Features Provided
Chromate free
Gloss Designation
Semigloss
Vehicle Material Type
Epoxy resin and polyamide resin
Finish For Which Formulated
Fine
Color Chip Number
26081
Volatile Organic Compound In Grams Per Liter
340.0
Environmental Attribute Code
Low volatile organic compound - coatings - aerospace operations coatings
Special Features
Lead free; topcoat for aircraft and ground support equipment
Color
Gray

Pricing and Availability

Send us a request for quote using the form below. Our team will contact you with an up to date pricing and availability quote ASAP.

Qty:
Email Address:
Phone Number:
Your name:
Company:
Privacy    Terms

Certified Quality Assurance  Quality check icon

  •   ISO 9001:2015 + AS9120B
  •   Counterfeit Parts Prevention
  •   100% Product Inspections
  •   7 Year Record Retention
  •   On Time Delivery
  •   HAZMAT Certified
  •   Worldwide Shipping

NSN 8010-00-082-2436 Datasheet

Supply Class (FSC):
Related Products Varnishes Dopes Paints
Cross Reference:
  • MIL-PRF-22750
  • M22750-002G-26081
  • MIL-C-22750
  • MIL-PRF-22750
  • M22750-002G-26081
  • MIL-C-22750
  • MIL-PRF-22750
  • M22750-002G-26081
  • MIL-C-22750
Cage Codes:
  • Military Specifications (CAGE 81349)
Schedule B & Trade:
  • Schedule B: 3907300000 (NAICS 325211)

    Epoxide resins

  • SITC: 57420

    Epoxide resins, in primary forms

  • End Use: 12500

    Plastic materials

Identification:
HMIC

Y - Indicates information is in the hazardous materials information resource system (hmirs).

PMIC

A - Item does not contain precious metal.

ENAC

JD - Aerospace operations coatings

CRITL

- The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.

Freight Information:
  • NMFC:

    149980 - Paint and related materials

  • WCC:

    620 - Paint, in individual containers less than 10 cubic ft

  • SHC:

    9 - Other or no special handling required (sh)

  • ADC:

    A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

  • ACC:

    B - Construction materials: includes paint and related materials, prefabricated building, wood products, metal and composition mater

  • TCC:

    R - Flammable liquids, un class 3 (flammable liquids label)

  • LTL:

    W - Rating variable

NSN Management Codes:
  • SOS
    Gsa
  • AAC
    Y
  • Quantity per pack
    1
  • Unit of Measure
    Kt
  • Shelf Life
    12 mo.
  • Classification Control
    U
  • MGMT_CTL
    9q----f
  • Repariability

Questions & Answers:

What are the historical prices recorded for this stock number?
Historical data shows pricing from $261.95 to $436.59..
Does NSN 8010-00-082-2436 have a shelf life?
No. There is no shelf life applicable for this NSN.
What NATO entities are users of this NSN?
Singapore, Greece, and Turkey
What is the NIIN of NSN 8010-00-082-2436?
000822436 or 00-082-2436
Does NSN 8010-00-082-2436 require demilitarization?
Yes - ITAR Controlled
What is the most recent solicitation for NSN 8010-00-082-2436?
No solicitations for this NSN.
When was this national stock number assigned to the federal catalog?
Jan 01, 1963
MSDS

Material Safety

MSDS BCXYB 1-1X-88 26081 GRAY MIL-C-22750C

Hazards

Effects of overexposure: anesthetic, headache, nausea, dizziness.

irritation to skin and eyes.

First Aid

First aid: in case of contact, flush eyes or skin with plenty of water.

Chemical Properties

Hcc: f3
boiling pt: b.P. Text: not determ.

spec gravity: 1.33
evaporation rate & reference: not determined
solubility in water: insoluble
appearance and odor: gray with benzol like odor
percent volatiles by volume: 56

Reactivity

Stability indicator/materials to avoid: yes

Proper Disposal

Waste disposal methods: evaporate or flush with water to open, well
ventilated area. Use oil sewer if available.

disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.

Ingredients List

Ingred name: solvents, unspecified
fraction by wt: 56%

ingred name: vehicle
fraction by wt: 23%

ingred name: pigments
fraction by wt: 21%

MSDS BMQRG EPOXY COATING, MIL-C-22750D #26081 PTB

Hazards

Routes of entry: inhalation: yes skin: yes ingestion: yes
health hazards acute and chronic: eye/skin: moderate irrit. Prolonged
contact- -damage/defat/drying (dermatitis). Absorb thru
skin--symptoms of expos as for inhal/ingest. Inhal:
irrit--nose/throat/resp tract/mucous membranes. Central nerv sys
depress. Prolong overexpos (solvent)--permanent brain/ nervous sys
damage. Concentating/inhaling of prod--
explanation of carcinogenicity: n/k harmful/fatal. Ingest: central nerv
sys depress. Aspiration into lungs can cause severe lung damage.

effects of overexposure: eye: pain, tearing, reddening, swelling. Skin:
reddening, swelling, rash. Inhal: runny nose, sore throat,
coughing, chest discomfort, shortness of breath, reduced lung
function. Ingest: sore throat/ab dom
pain/nausea/vomitting/diarrhea. Central nerv sys depress:
headache/dizziness/nausea/intoxication/unconsciousness
medical cond aggravated by exposure: preexisiting skin, eye & resp
disorders. Impaired central nervous system functions from preexist
disorders. & death. Chronic overexpos: loss of memory, intellectual
ability, coordination.

First Aid

First aid: eye: immed flush eye w/water 15 min, eyelids open. See dr.

skin: remove contam cloth & shoes. Wipe excess from skin. Flush
w/water & soap. See dr if irrit. Inhal: gross over expos to
nuisance particle may cause irrit of resp tract. Ingest: don't
induce vomiting unless dr orders. If occurs spontaneously, keep
head below hips (prevent aspiration). Consult dr/poison control
ctr/transport to emerg rm.

Chemical Properties

Hcc: f3
vapor density: >1
spec gravity: 11.66 lb/gl
evaporation rate & reference:
percent volatiles by volume: 46.09

Reactivity

Stability indicator/materials to avoid: yes
avoid oxidizing materials, strong acids, amines, polyamines & polamides
under uncontrolled conditions.

hazardous decomposition products: aldehydes and acids, carbon dioxide,
carbon monoxide and unidentified organic compounds may be formed
during combustion.

Proper Disposal

Waste disposal methods: observe all federal, state & local regulations
regarding proper disposal. Flush area w/water to remove trace
residue. Dispose of flush solution as above. Small spills: take up
w/absorbent & place in n on-leaking cntnr. Seal tightly for
disposal.

disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.

Ingredients List

Ingred name: polymers of epoxy resin & bisphenol a
cas: 25036-25-3
fraction by wt: 30-35%
other rec limits: none specified
osha pel: 5 mg/m3 (total dust)
acgih tlv: 5 mg/m3 (total dust)

ingred name: 1-methoxy-2-propanol (sara 313) (vapor pressure 12.5 @ 25
c) (lel 1.60 @ 25 c)
cas: 107-98-2
rtecs #: ub7700000
fraction by wt: 10-15%
other rec limits: none specified
acgih tlv: 100 ppm/150 ppm stel

ingred name: titanium dioxide
cas: 13463-67-7
rtecs #: xr2275000
fraction by wt: 15-20%
other rec limits: none specified
osha pel: 15 mg/m3 tdust
acgih tlv: 10 mg/m3 tdust; 9293

ingred name: aluminium oxide
cas: 21645-51-2
rtecs #: bd0940000
fraction by wt: 1-5%
other rec limits: none specified
acgih tlv: 10 mg/m3(total dust)

ingred name: amorphous silica gel
cas: 112945-52-5
rtecs #: vv7310000
fraction by wt: 1-5%
other rec limits: none specified
osha pel: 20 mppfc
acgih tlv: 10 mg/m3(total dust)

ingred name: yellow iron oxide
cas: 20344-49-4
fraction by wt: 1-5%
other rec limits: none specified
osha pel: 10 mg/m3

ingred name: carbon black
cas: 1333-86-4
rtecs #: ff5800000
fraction by wt: 1-5%
other rec limits: none specified
osha pel: 3.5 mg/m3
acgih tlv: 3.5 mg/m3

ingred name: talc
cas: 14807-96-6
rtecs #: ww2710000
fraction by wt: 15-20%
other rec limits: none specified
osha pel: 20 mppcf
acgih tlv: 2 mg/m3 resp dust

ingred name: n-butyl acetate (vapor pressure 10 mm hg @ 20c) (lel 1.38 @
38 c)
cas: 123-86-4
rtecs #: af7350000
fraction by wt: 1-5%
other rec limits: none specified
osha pel: 150 ppm
acgih tlv: 150 ppm/200 ppm stel
epa rpt qty: 5000 lbs
dot rpt qty: 5000 lbs

ingred name: ethyl acetate (vapor pressure 100 mm hg @ 27c) (lel 2.18 @
25 c)
cas: 141-78-6
rtecs #: ah5425000
fraction by wt: 1-5%
other rec limits: none specified
osha pel: 400 ppm
acgih tlv: 400 ppm
epa rpt qty: 5000 lbs
dot rpt qty: 5000 lbs

ingred name: toluene (sara iii)
cas: 108-88-3
rtecs #: xs5250000
fraction by wt: 1-5%
other rec limits: none specified
osha pel: 200 ppm/150 stel
acgih tlv: 50 ppm; 9293
epa rpt qty: 1000 lbs
dot rpt qty: 1000 lbs

ingred name: methyl ethyl ketone (sara 313) (vapor pressure 70.20 mm hg
@ 20 c) (lel 1.80 @ 25 c)
cas: 78-93-3
rtecs #: el6475000
fraction by wt: 5-10%
other rec limits: none specified
osha pel: 200 ppm
acgih tlv: 200 ppm/300 ppm stel
epa rpt qty: 5000 lbs
dot rpt qty: 5000 lbs

MSDS BMQRH CURING AGENT, MIL-C-22750D #20,000 PTA

Hazards

Routes of entry: inhalation: yes skin: yes ingestion: yes
health hazards acute and chronic: eye: severe irrit, extensive corneal
injury. Skin: irrit. Prolong/repeat: defat/drying/dermatitis.

inhal: irrit to nose, throat, resp tract, mucous membranes. High
conc: central nerv sys depress. Prol ong overexpos: perm brain/nerv
sys damage. Conc & inhal harmful/fatal. Ingest: slightly toxic.

aspiration of mat'l into
effects of overexposure: eye: pain, tearing, reddening & swelling. Skin:
reddening, swelling, rash. Inhal: runny nose, sore throat, cough,
chest discomfort, shortness of breath & reduced lung function.

ingest: sore throat, ab dom pain, nausea, vomiting & diarrhea.

headache, dizziness, nausea, symptoms of intoxication
unconsciousness, death.

medical cond aggravated by exposure: preexisting skin, eye & resp
disorders. Impaired central nerv sys function from preexisting
disorders. Chronic overexpos: loss of memory, intellectual ability
& coordination.

First Aid

First aid: eye: immed flush eyes w/water 15 min, holding eyelids open.

get med aid. Skin: remove contam clothing & shoes. Wipe excess from
skin. Flush w/water & soap. Seek med aid if irrit occurs. Ingest:
do not induce vomiting unless dr orders. If vomiting occurs
spontaneously, keep head below the hips to prevent aspiration into
lungs. Consult a dr, hospital, poison control ctr/transport to
emerg facility.

Chemical Properties

Hcc: f3
vapor density: >1
spec gravity: 7.44 lb/gl
evaporation rate & reference:
percent volatiles by volume: 76.00

Reactivity

Stability indicator/materials to avoid: yes
avoid oxidizing mat'l, strong alkalies, amines & alkanolamines,
chlorinated compounds and aldehydes.

hazardous decomposition products: carbon dioxide, carbon monoxide and
unidentified organic compounds may be formed during combustion.

Proper Disposal

Waste disposal methods: observe all federal, state and local regulations
regarding proper disposal. Cntnrs. Flush w/water to remove trace
residue. Dispose of flush solution as above. Sm spills: take up
w/absorbent & place in non-leaking cntnrs. Seal tightly for
disposal
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.

Ingredients List

Ingred name: 2-propanol (sara 313) (vapor pressure 30.00 mm hg @ 20 c)
(lel 2.00 @ 25 c)
cas: 67-63-0
rtecs #: nt8050000
fraction by wt: 5 - 10%
other rec limits: none specified
osha pel: 400 ppm
acgih tlv: 400 ppm/500 ppm stel

ingred name: n-butyl acetate (vapor pressure 10 mm hg @ 20 c) (lel 1.38
@ 38 c)
cas: 123-86-4
rtecs #: af7350000
fraction by wt: 25 - 30%
other rec limits: none specified
osha pel: 150 ppm
acgih tlv: 150 ppm/200 ppm stel
epa rpt qty: 5000 lbs
dot rpt qty: 5000 lbs

ingred name: ethyl acetate (vapor pressure 100 mm hg @ 27 c) (lel 2.18 @
25 c)
cas: 141-78-6
rtecs #: ah5425000
fraction by wt: 15 -20%
other rec limits: mfr limit 5 ppm
osha pel: 400 ppm (skin)
acgih tlv: 400 ppm (skin)
epa rpt qty: 5000 lbs
dot rpt qty: 5000 lbs

ingred name: toluene (sara iii)
cas: 108-88-3
rtecs #: xs5250000
fraction by wt: 20 - 25%
other rec limits: none specified
osha pel: 200 ppm/150 stel
acgih tlv: 50 ppm; 9293
epa rpt qty: 1000 lbs
dot rpt qty: 1000 lbs

ingred name: sanding/grinding dust (dried product film). Osha pel/twa 15
mg/m3 total dust/5 mg/m3 resp fraction. #
rtecs #: 9999999zz
other rec limits: none specified

ingred name: #acgih tlv/twa 10 mg/m3 total dust.

rtecs #: 9999999zz
other rec limits: none specified

ingred name: sanding/grinding of dried film may become dust nuisance.

rtecs #: 9999999zz
other rec limits: * 5 mg/m3 resp fract
osha pel: 15 mg/m3 total dust*
acgih tlv: 10 mg/m3 total dust

ingred name: skin absorption may contribute to the overall exposure to
material. Take appropriate measures to prevent skin contact.

rtecs #: 9999999zz
other rec limits: none specified