NationalStockNumber.INFO
Worldwide distributor of NSN parts and consumables located in the USA.
Worldwide distributor of NSN parts and consumables located in the USA.
A finish coat material composed of a base compound and an accelerator. The base material consists of an epoxy resin which is a reaction product of epichlorohydrin. The activator is normally a polyamide, polyamine, or similar compound. Usually, for colored epoxy finishes, only the base material contains pigment or dye, but both base and activator may be colored. The material may also be furnished with pigment separate from both base compound and accelerator.
Send us a request for quote using the form below. Our team will contact you with an up to date pricing and availability quote ASAP.
Epoxide resins
Epoxide resins, in primary forms
Plastic materials
Y - Indicates information is in the hazardous materials information resource system (hmirs).
PMICA - Item does not contain precious metal.
CRITL- The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
004620 - Adhesives: cements, glues, pastes noi
705 - Cement, liquid
9 - Other or no special handling required (sh)
A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
C - Chemical corps items and all other chemicals not covered in other classificatons. note: when an item has a chemical proper shipp
R - Flammable liquids, un class 3 (flammable liquids label)
W - Rating variable
W - Rating variable
Questions & Answers: |
|
| What are the historical prices recorded for this stock number? | |
| Historical data shows pricing from $513.34 to $855.56.. | |
| Does NSN 8010-00-118-2456 have a shelf life? | |
| No. There is no shelf life applicable for this NSN. | |
| What NATO entities are users of this NSN? | |
| Spain, Germany, and Italy | |
| What is the NIIN of NSN 8010-00-118-2456? | |
| 001182456 or 00-118-2456 | |
| Does NSN 8010-00-118-2456 require demilitarization? | |
| Yes - ITAR Controlled | |
| What is the most recent solicitation for NSN 8010-00-118-2456? | |
| No solicitations for this NSN. | |
| When was this national stock number assigned to the federal catalog? | |
| Jul 15, 1973 | |
Effects of overexposure: intoxication
First aid: move to fresh air,call physician.
Hcc: f2
boiling pt: b.P. Text: 230f
vapor pres: 9.5
vapor density: 1.03
spec gravity: 1.22
evaporation rate & reference: 0.75 butyl acetate
solubility in water: moderate
percent volatiles by volume: 66.0
Waste disposal methods: liquid incinerator.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: pigment
fraction by wt: 27.0%
ingred name: resin
fraction by wt: 27.0%
ingred name: solvent
fraction by wt: 36%
Routes of entry: inhalation: yes skin: yes ingestion: yes
health hazards acute and chronic: eyes: can cause severe irritation.
skin: prolonged/repeated contact can cause irritation. Defatting
& possible dermatitis. Breathing excessive amounts of vapors
may cause nasal & respiratory irr i, nausea or unconsc. Swallow:
vomit,irri, nausea, aspiration into lungs can cause chem
pneumonitis can be fatal.
explanation of carcinogenicity: na
effects of overexposure: over exposure can cause intoxication, eye
irritation, eye irritation, redness & other allergic responses such
as skin irritation or dermatitis.
medical cond aggravated by exposure: respiratory disorders and
dermatitis.
First aid: eyes: flush with water for 15 min., consult physician
immediately. Skin: wash with soap & water, launder clothing
before re-use. If swallowed: do not induce vomiting. Keep person
warm, quiet & get medical attention immediately.
Boiling pt: b.P. Text: 175 f
melt/freeze pt: m.P/f.P text: na
vapor pres: 70
vapor density: 1.03
spec gravity: 1.5
evaporation rate & reference: < 1.0 (ether=1)
solubility in water: 20%
appearance and odor: heavy liquid - hydrocarbon odor
Stability indicator/materials to avoid: yes
strong oxidizers or strong acids.
stability condition to avoid: extreme heat, open flame or sparks.
hazardous decomposition products: carbon dioxide, carbon monoxide & may
form other hydrocarbonby products.
conditions to avoid polymerization: extreme heat, open flame or sparks.
Waste disposal methods: incinerate in accordance with local, state and
federal regulations. Very small amounts may be buried in
landfill in accordance with all regulations.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: epoxy resin
fraction by wt: 28%
ingred name: di acetone alcohol
rtecs #: hi5600000
fraction by wt: 3%
osha pel: 50 ppm
acgih tlv: 50 ppm
ingred name: xylenes (o-,m-,p- isomers) (sara iii)
cas: 1330-20-7
rtecs #: ze2100000
fraction by wt: 15%
osha pel: 100 ppm/150 stel
acgih tlv: 100 ppm/150stel;9192
epa rpt qty: 1000 lbs
dot rpt qty: 1000 lbs
ingred name: isopropyl alcohol (sara iii)
cas: 67-63-0
rtecs #: nt8050000
fraction by wt: 4%
osha pel: 400 ppm/500 stel
acgih tlv: 400 ppm/500stel;9192
ingred name: methyl isobutyl carbinol
cas: 108-11-2
rtecs #: sa7350000
fraction by wt: 4%
osha pel: s,25 ppm/40 stel
acgih tlv: s,25 ppm/40stel;9192
ingred name: methyl ethyl ketone (2-butanone) (mek) (sara iii)
cas: 78-93-3
rtecs #: el6475000
fraction by wt: 1%
osha pel: 200 ppm/300 stel
acgih tlv: 200 ppm/300stel 9192
epa rpt qty: 5000 lbs
dot rpt qty: 5000 lbs
ingred name: inert pigments
fraction by wt: 44%
osha pel: 200 ppm
acgih tlv: 200 ppm
Routes of entry: inhalation: yes skin: yes ingestion: yes
health hazards acute and chronic: can cause severe irritation. Skin:
prolonged/repeated contact can irritate. De- fatting & possible
dermatitis, breathing excessive amounts of vapors may cause nasal
& respiratory irritation, nausea o r unconsciousness. Swallow:
irritation,nausea, vomit, aspiration, can cause chem pneumonitis
which can be fatal/harmful
explanation of carcinogenicity: na
effects of overexposure: over exposure can cause intoxication, eye
irritation, redness & other allergic responses such as skin
irritation or dermatitis.
medical cond aggravated by exposure: respiratory disorders and
dermatitis.
First aid: eyes: flush with water for 15 minutes, consult physician
immediately. Skin: washwith soap and water, launder clothing before
re-use. If swallowed: do not inducevomiting. Keep person warm,
quiet and ge t medical attention immediately.
Boiling pt: b.P. Text: 175 f
melt/freeze pt: m.P/f.P text: na
vapor pres: 70
vapor density: 1.03
spec gravity: 0.76
evaporation rate & reference: < 1.0 (ether=1)
solubility in water: 20 %
appearance and odor: amber liquid - ammonia hydrocarbon odor
Stability indicator/materials to avoid: yes
strong oxidizers or strong acids
stability condition to avoid: extreme heat, open flame or sparks
hazardous decomposition products: carbon dioxide, carbon monoxide & may
form other hydrocarbonby products
conditions to avoid polymerization: extreme heat, open flame or sparks
Waste disposal methods: incinerate in accordance with local, state and
federal regulation. Very small amounts may be buried in
landfill in accordance with all regula- tions.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: xylenes (o-,m-,p- isomers) (sara iii)
cas: 1330-20-7
rtecs #: ze2100000
fraction by wt: 52%
osha pel: 100 ppm/150 stel
acgih tlv: 100 ppm/150stel;9192
epa rpt qty: 1000 lbs
dot rpt qty: 1000 lbs
ingred name: heavy aromatic hydrocarbons
fraction by wt: 19%
osha pel: 100 ppm
acgih tlv: 100 ppm
ingred name: non hazardious ingredients
fraction by wt: 29%