Secure Ordering: +1 (757) 528-8028
NationalStockNumber.info
NationalStockNumber.INFO

Worldwide distributor of NSN parts and consumables located in the USA.

Enamel

NSN: 8010-00-145-0164 | Model: TT-E-490

Pigment dispersed in a varnish vehicle containing natural or synthetic resin. The varnish may be modified with drying oil to the extent that the total drying oil content of the vehicle, including the oil in the varnish, does not exceed 75 percent, by weight, of the total nonvolatile portion of the vehicle. When applied in a thin layer, it dries principally by polymerization and/or oxidation to form a hard, smooth, opaque film. Excludes lacquer; enamel, heat resisting; bituminous and ceramic coatings and gold size.

NSN Properties and Flags
NATO Stock Number
8010-00-145-0164
DEMIL
NO
Specific Use
Finish coat on primed wood and metal surfaces
Quantity Within Each Unit Package
1.000 gallons
Gloss Designation
Semigloss
Pigment Material Type
Titanium oxide
Color Chip Number
27886
Color
White

Inventory Check

The last inventory check on this NSN was done on 10/28/2020. Due to rapid changes in inventory this may not be the current stock qty.

  • New: 1

Pricing and Availability

Send us a request for quote using the form below. Our team will contact you with an up to date pricing and availability quote ASAP.

Qty:
Email Address:
Phone Number:
Your name:
Company:
Privacy    Terms

Certified Quality Assurance  Quality check icon

  •   ISO 9001:2015 + AS9120B
  •   Counterfeit Parts Prevention
  •   100% Product Inspections
  •   7 Year Record Retention
  •   On Time Delivery
  •   HAZMAT Certified
  •   Worldwide Shipping

NSN 8010-00-145-0164 Datasheet

Supply Class (FSC):
Related Products Varnishes Dopes Paints
Cross Reference:
  • TT-E-490
  • MIL-E-16738
  • MIL-E-1264
Cage Codes:
  • Federal Specifications (CAGE 81348)
  • Military Specifications (CAGE 81349)
Replacements:
  • 8010-00-145-0164 replaces 8010-00-584-2952
Schedule B & Trade:
  • Schedule B: 3208900000 (NAICS 325510)

    Paints and varnishe (incl enamels & lacquers) based on synthetic polymers, etc in a nonaqueous medium, nesoi

  • SITC: 53342

    Paints and varnishes (including enamels and lacquers) based on synthetic or chemically modified natural polymers, nonaqueous; plastics in solution

  • End Use: 12550

    Chemicals-other

Identification:
HMIC

Y - Indicates information is in the hazardous materials information resource system (hmirs).

PMIC

A - Item does not contain precious metal.

CRITL

- The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.

Freight Information:
  • NMFC:

    149980 - Paint and related materials

  • WCC:

    620 - Paint, in individual containers less than 10 cubic ft

  • SHC:

    9 - Other or no special handling required (sh)

  • ADC:

    A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

  • ACC:

    B - Construction materials: includes paint and related materials, prefabricated building, wood products, metal and composition mater

  • TCC:

    R - Flammable liquids, un class 3 (flammable liquids label)

  • LTL:

    W - Rating variable

NSN Management Codes:
  • SOS
    Gsa
  • AAC
    Y
  • Quantity per pack
    4
  • Unit of Measure
    Gl
  • Shelf Life
    24 mo.
  • Classification Control
    U
  • MGMT_CTL
    9q----f
  • Repariability

Questions & Answers:

What are the historical prices recorded for this stock number?
Historical data shows pricing from $76.50 to $127.51..
Does NSN 8010-00-145-0164 have a shelf life?
No. There is no shelf life applicable for this NSN.
What NATO entities are users of this NSN?
Republic Of Korea, United Kingdom, Philippines, Greece, and Turkey
What is the NIIN of NSN 8010-00-145-0164?
001450164 or 00-145-0164
Does NSN 8010-00-145-0164 require demilitarization?
Yes - ITAR Controlled
What is the most recent solicitation for NSN 8010-00-145-0164?
No solicitations for this NSN.
When was this national stock number assigned to the federal catalog?
Jun 18, 1969
MSDS

Material Safety

MSDS BDCDD SILICONE ALKYD WHITE 27886 BTTE490W

Hazards

Routes of entry: inhalation: yes skin: yes ingestion: yes
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: many petroleum hydrocarbons and
synthetic lubricants pose potential human health risks. As a
precaution, exposure to liquids, vapors, mists or fumes should be
minimized. Chronic exposure may cause dam age to central nervous
system, respiratory system, lungs, eyes, skin, gastrointestinal
tract, liver, spleen & kidneys.

explanation of carcinogenicity: chemicals may cause cancer, birth
defects or other reproductive harm.

effects of overexposure: inhal-vapors can cause nasal & respiratory
irritation, dizziness, weakness, fatigue, nausea & headache.

skin-can cause moderate irritation, defatting & dermatitis.

eye-severe irritation, tearing, redn ess & blurred vision.

ingest-can cause irritation of the digestive tract and central
nervous system depression.*
medical cond aggravated by exposure: respiratory tract irritation,
dermatitis, nausea. *material can enter the lungs during swallowing
or vomiting and cause lung inflammation.

First Aid

First aid: eyes-flush w/water for 15 minutes. Skin-remove contaminated
clothing, wash thoroughly w/soap and water. Inhal-remove victim to
fresh air. Apply artificial respiration or administer oxygen if
needed. I ngest-give water or milk to drink & phone for medical
attention. Do not induce vomiting unless directed by medical
personnel. If medical advice not available take person to nearest
emergency hospital.

Chemical Properties

Boiling pt: b.P. Text: 306f
vapor density: >air
spec gravity: 1.2
evaporation rate & reference: slower than ether
solubility in water: not water/soluble
appearance and odor: pigmented liquid. Mild solvent odor.

Reactivity

Stability indicator/materials to avoid: yes
strong oxidizing agents.

stability condition to avoid: do not expose to heat or ignition sources.

hazardous decomposition products: thermal decomposition may yield carbon
dioxide and/or monoxide, low moleular weight hydrocarbons and
organic acids.

Proper Disposal

Waste disposal methods: keep out of drains, sewers and waterways.

dispose in accordance with local, county, state and federal
regulations.

disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.

Ingredients List

Ingred name: vm&p naphtha (ligroine)
cas: 8032-32-4
rtecs #: oi6180000
fraction by wt: 35%
other rec limits: 125 ppm
osha pel: 300 ppm/400 stel
acgih tlv: 300 ppm; 9192

ingred name: talc (containing no asbestos)
cas: 14807-96-6
rtecs #: ww2710000
fraction by wt: 5%
other rec limits: dust
osha pel: 2 mg/m3 rdust
acgih tlv: 2 mg/m3 rdust; 9192

MSDS BDCDF WHITE

Hazards

Effects of overexposure: produces severe eye irritation,drying of
skin.Excessive inhalation causes headache,dizziness,nausea.

First Aid

First aid: eye contact-flush with water.Skin contact-wash with mild soap
and water and apply skin creme.Inhalation-remove to fresh air and
call physician.Apply artificial respiration,if necessary

Chemical Properties

Boiling pt: b.P. Text: 315 f
vapor pres: 80
vapor density: 4.9
spec gravity: 1.25
evaporation rate & reference: slower than nbuact
solubility in water: negligible
appearance and odor: petroleum distillate odor,white opaque liquid
percent volatiles by volume: 57.0

Reactivity

Stability indicator/materials to avoid: yes
strong oxidizers
stability condition to avoid: excessive heat,sparks, open flames
hazardous decomposition products: thermal decomposition may yield carbon
monoxide

Proper Disposal

Waste disposal methods: landfill, incineration under safe and supervised
conditions.

disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.

Ingredients List

Ingred name: petroleum distillate
fraction by wt: 32.5%
acgih tlv: 2000 mg/cum

MSDS BKPFZ ENAMEL, ALKYD SEMI-GLOSS

Hazards

Ld50 lc50 mixture: 200 ppm for 8 hour working day.

health hazards acute and chronic: severe eye irritation, drying of skin,
excessive inhalation causes headache, dizziness and nausea.

First Aid

First aid: eye contact: flush with water. Skin contact: remove paint
with mineral spirits. Then wash with mild soap and water and apply
skin cream. Inhalation: remove to fresh air and call a physician.

apply art ificial respiration if necessary.

Chemical Properties

Hcc: f4
boiling pt: b.P. Text: 310 to 390f
vapor pres: 2 mm @ 68f
vapor density: 4.0
spec gravity: 1.224
evaporation rate & reference: 0.28 (buac=1)
solubility in water: negligible
appearance and odor: gray and/or white viscous liquid of mineral spirits
order. (light)
percent volatiles by volume: 57.1

Reactivity

Stability indicator/materials to avoid: yes
strong oxidizing agents will dissolve or soften some plastics & rubber.

stability condition to avoid: heat, sparks, open flame and fire.

hazardous decomposition products: thermal decomposition may yield carbon
monoxide, co2 and possibly acrolein.

Proper Disposal

Waste disposal methods: place in closed containers. Rags & absorbent
materials should be immediately immersed in water. Dispose of in
accordance with local, state and federal regulations. Notify fire
and health agencies.

disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.

Ingredients List

Ingred name: mineral spirits
fraction by wt: 37.1%
other rec limits: none specified
acgih tlv: 200 ppm

MSDS BMSJN ENAMEL ALKYD SEMI-GLOSS FOR EXT & INT WHITE

Hazards

Routes of entry: inhalation: yes skin: yes ingestion: yes
health hazards acute and chronic: (acgih)(osha)100 ppm (590 mg/m3) for 8
hour work day. High vapor concentrations (over 1000 ppm) are
irritating to the eye & respiratory tract. May cause headaches &
dizziness-prolonged skin contact ir ritates.

First Aid

First aid: eye: flush with water for 15 mins or until irritation
subsides. If irritation persists, call a physician. Skin: remove
contaminated clothing and wash thoroughly with soap and water.

inhalation: if ove rcome by vapors, remove to fresh air, call
physician. Ingestion: do not induce vomiting, call physician.

Chemical Properties

Boiling pt: b.P. Text: 308f,153c
melt/freeze pt: m.P/f.P text:
vapor pres:
vapor density: 4.8
spec gravity: 1.26
evaporation rate & reference: .09 (butyl acetate = 1)
solubility in water: insoluble
appearance and odor: white color liquid with kerosene odor.

Reactivity

Stability indicator/materials to avoid: yes
can react with oxidizing materials when heated to decomposition.

stability condition to avoid: high temperature
hazardous decomposition products: carbon monoxide

Proper Disposal

Waste disposal methods: assure conformity with applicable disposal
regulations. Dispose of absorbed material at an approved disposal
site or facility.

disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.

Ingredients List

Ingred name: solvents- rule 66 mineral spirits
fraction by wt: 34%
other rec limits: none specified
acgih tlv: 200 ppm

ingred name: voc- 3.6 lbs/gal or 431 grams/liter
rtecs #: 9999999vo
other rec limits: none specified

MSDS BMSJP SILICONE ALKYD ENAMEL

Hazards

Routes of entry: inhalation: yes skin: yes ingestion: yes
health hazards acute and chronic: acute- solvent vapors may cause
drowsiness, headache, dizziness and irritation of eyes, nose and
throat. Chronic- eyes-irritation, blurred vision, tearing.

skin-irritation, defatting, dermatitis. Brea thing-dizziness,
weakness, nausea, headache. Swallowing-gastrointestinal irritation,
nausea, vomiting, diarrhea.

First Aid

First aid: remove to fresh air. Flush eyes with lots of water. Consult
physician.

Chemical Properties

Boiling pt: b.P. Text: 230 to 284f
vapor density: > air
evaporation rate & reference: slower than ether
percent volatiles by volume: 45

Reactivity

Stability indicator/materials to avoid: yes
avoid contact with oxidants.

stability condition to avoid: flames or high heat.

hazardous decomposition products: carbon monoxide may form when burned.

conditions to avoid polymerization: flames or high heat.

Proper Disposal

Waste disposal methods: according to current local, state and federal
regulations.

disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.

Ingredients List

Ingred name: xylene (sara 313) (vp- 25 @ 20 c)
cas: 1330-20-7
rtecs #: ze2100000
fraction by wt: 5-15%
other rec limits: none specified
acgih tlv: 100 ppm;150 ppm stel
epa rpt qty: 1000 lbs
dot rpt qty: 1000 lbs

ingred name: mineral spirits (vp- 10 @ 20 c)
cas: 8032-32-4
rtecs #: oi6180000
fraction by wt: 20-30%
other rec limits: none specified
acgih tlv: 200 ppm

ingred name: cobalt naphthenate (sara 313) (vp- 10 @ 20 c)
cas: 61789-51-3
rtecs #: qk8925000
fraction by wt: under 1%
other rec limits: none specified

MSDS BNPLL TT-E-490 SI/ALKYD WHITE

Hazards

Routes of entry: inhalation: yes skin: yes ingestion: yes
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: inhal: nasal & resp irrit, narcosis
(cntrl nerv sys depress). Eye: severe irrit. Skin: irrit, defat,
dermatitis. Ingest: digest tract irrit, cntrl nerv sys depress.

aspiration hzd. Mat'l enter lungs ( swallow/vomit), cause lung
inflamm. Chronic: cntrl nerv sys/resp sys/lung/eye/skin/gi
tract/liver/spleen/kidney damage.

effects of overexposure: inhalation: dizziness, weakness, fatigue,
nausea, and headache. Eye: tearing, redness, and blurred vision.

medical cond aggravated by exposure: respiratory tract irritation,
dermatitis, nausea.

First Aid

First aid: eye: flush w/water 15 min, occasionally lifting eyelids. Get
med attn. Skin: remove contaminated clothing, wash w/soap & water.

if irritation persists, see dr. Inhal: remove to fresh air. Apply
artif respiration/administer oxygen if needed. Consult dr. Ingest:
give water/milk to drink. Phone for med advice. Don't induce vomit
unless directed by med personnel. If advice unavail, take to emerg
room.

Chemical Properties

Boiling pt: b.P. Text: 274 to 315f
vapor density: > air
spec gravity: 1.3 (water=1)
evaporation rate & reference: slower than ether
solubility in water: not water soluble
appearance and odor: pigmented liquid. Solvent odor.

Reactivity

Stability indicator/materials to avoid: yes
strong oxidizing agents.

stability condition to avoid: do not expose to heat or ignition sources.

hazardous decomposition products: thermal decomposition may yield carbon
dioxide and/or monoxide, low molecular weight hydrocarbons &
organic acids.

Proper Disposal

Waste disposal methods: keep out of drains, sewers and waterways.

dispose of product in accordance with local, state and federal
regulations.

disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.

Ingredients List

Ingred name: hydrocarbon mixture (vapor pressure 2.0 mm hg @ 68 f)
cas: 64741-41-9
fraction by wt: 30%
other rec limits: none specified
osha pel: 500 ppm
acgih tlv: 100 ppm

ingred name: talc
cas: 14807-96-6
rtecs #: ww2710000
fraction by wt: 10%
other rec limits: none specified
acgih tlv: 2 mg/m3 resp dust

ingred name: mica
cas: 12001-26-2
rtecs #: vv8760000
fraction by wt:
other rec limits: none specified
osha pel: 20 mppcf
acgih tlv: 3 mg/m3 rdust; 9293

MSDS BTZVL N-5424 WHITE SI ALKYD

Hazards

Routes of entry: inhalation: yes skin: unknown ingestion: yes
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: eyes: severe
irritation,tearing,redness,blurred vision.

skin: redness,irritation,defatting (dermatitis). Inhal: nasal & resp
irritation, cns depression
(dizziness,drowsiness,weakness,fatigue,confusion)
nausea,headache,vertigo,unconsciousness,asphyxiation. Ingest: gi
irritation, abdominal pain, nausea,vomiting, diarrhea.

effects of overexposure: target organs: skin, eyes, respiratory system,
cns.

medical cond aggravated by exposure: none kn0wn

First Aid

First aid: get immed med aid. Inhal: move to fresh air immed.If no
breath,give artif resp. Skin: immed flush w/water.If penetrates
clothes,immed remove contam cloth & flush skin w/water.Wash clothes
& decontam sho es before reuse. Eye: immed flush w/water 15 min,lift
eyelids.Don't wear contact when working w/mat'l.Ingest: drink 1-2
glasses water.Don't induce vomiting.See dr/poison cntrl ctr immed.

treat symptoms.

Chemical Properties

Boiling pt: b.P. Text: 278 to 398f
vapor density: > air
spec gravity: 1.259
viscosity: 67 - 77 ku
evaporation rate & reference: slower than ether
solubility in water: slight
appearance and odor: liquid, odor of solvents
percent volatiles by volume: 54.13
corrosion rate: minimal

Reactivity

Stability indicator/materials to avoid: yes
strong oxidizers
hazardous decomposition products: can produce carbon monoxide and/or
carbon dioxide.

conditions to avoid polymerization: high temperatures, shock from
dropping

Proper Disposal

Waste disposal methods: dispose of in accordance with applicable local,
state, and federal regulations.

disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.

Ingredients List

Ingred name: mineral spirits (vapor pressure 0.0 mm @ 20c)
cas: 8052-41-3
rtecs #: wj8925000
fraction by wt: 32%
other rec limits: none recommended
osha pel: 100 ppm
acgih tlv: 100 ppm

ingred name: silicone alkyd
fraction by wt: 27%
other rec limits: none recommended

ingred name: cobalt compounds (as co) (sara iii)
cas: 7440-48-4
rtecs #: gf8750000
fraction by wt:
other rec limits: none recommended
osha pel: 0.1 mg/m3
acgih tlv: 2 mg/m3

ingred name: manganese compounds (as mn) (sara iii)
cas: 7439-96-5
rtecs #: oo9275000
fraction by wt:
other rec limits: none recommended
osha pel: 5 mg/m3
acgih tlv: 5 mg/m3

ingred name: voc: 3.48 lbs/gal
rtecs #: 9999999vo
other rec limits: none recommended

ingred name: proprietary ingredients (mfr states unidentified
ingredients are not considered hazardous under fed hazard comm
regs)
fraction by wt: balance
other rec limits: none recommended