Worldwide distributor of NSN parts and consumables located in the USA.
A liquid composition of drying oi (s) and resin which is specifically compounded to produce a transparent or translucent hard finish after application as a thin layer. It may have other incidental values, such as resistance to fungus, and a degree of electrical insulation. It dries and sets by evaporation, oxidation and polymerization. For items specifically compounded primarily for electrical insulating characteristics, see insulating varnish, electrical. Excludes bituminous base items. See also lacquer; paint (as modified) and enamel.
The last inventory check on this NSN was done on 11/04/2020. Due to rapid changes in inventory this may not be the current stock qty.
Send us a request for quote using the form below. Our team will contact you with an up to date pricing and availability quote ASAP.
Paints and varnishe (incl enamels & lacquers) based on synthetic polymers, etc in a nonaqueous medium, based on polyesters
Paints and varnishes (including enamels and lacquers) based on synthetic or chemically modified natural polymers, nonaqueous; plastics in solution
Chemicals-other
Y - Indicates information is in the hazardous materials information resource system (hmirs).
PMICA - Item does not contain precious metal.
CRITL- The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
149980 - Paint and related materials
620 - Paint, in individual containers less than 10 cubic ft
9 - Other or no special handling required (sh)
A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
B - Construction materials: includes paint and related materials, prefabricated building, wood products, metal and composition mater
R - Flammable liquids, un class 3 (flammable liquids label)
W - Rating variable
Questions & Answers: |
|
What are the historical prices recorded for this stock number? | |
Historical data shows pricing from $141.06 to $235.10.. | |
Does NSN 8010-00-165-4400 have a shelf life? | |
No. There is no shelf life applicable for this NSN. | |
What NATO entities are users of this NSN? | |
No recorded entities for this stock number. | |
What is the NIIN of NSN 8010-00-165-4400? | |
001654400 or 00-165-4400 | |
Does NSN 8010-00-165-4400 require demilitarization? | |
Yes - ITAR Controlled | |
What is the most recent solicitation for NSN 8010-00-165-4400? | |
No solicitations for this NSN. | |
When was this national stock number assigned to the federal catalog? | |
Jan 01, 1963 |
Routes of entry: inhalation: yes skin: yes ingestion: yes
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: notice: reports have associated
repeated & prolonged occupational over-exposure to solvents with
permanent brain & nervous system damage. Intentional misuse by
deliberately concentrating & inhaling th e contents may be harmful
or fatal.
explanation of carcinogenicity: no
effects of overexposure: inhaled: can cause nasal & rsprtry irrit, dizzi,
weak, fatigue, nausea, headache, possible unconsc & asphyxiation.
skin: prolonged/repeated contact can cause moderate irrit, defatt,
dermatitis. Eyes: can cause gastrointestinal irrit, nausea, vomit &
diarrhea. Aspiration into lungs can cause chem pneumonitis, can be
fatal
First aid: inhaled: remove to fresh air. If breathing is difficult, admin
oxygen. If breathing stopped give cpr. Keep person warm, quiet &
get med attn. Eye & skin: promptly & thoro wash eyes w/water for at
least 15 mins & consult dr. If irrit persists. Wash skin thoro
with soap & water; if drenched, remove & wash clothes before reuse.
ingestion: do not induce vomiting, keep person warm & quiet, get med
attn.
Boiling pt: b.P. Text: 314 to 383f
vapor density: > than air
viscosity: c-e (gardner)
evaporation rate & reference: slower than ether
solubility in water: negligible
appearance and odor: thin clear liquid, mild odor
percent volatiles by volume: 49-50
Stability indicator/materials to avoid: yes
avoid contact with strong oxidizing agents
stability condition to avoid: high temperatures or direct heating
hazardous decomposition products: may produce fumes when heated to
decomposition. The fumes may contain co, co2, various hydrocarbons,
etc.
Waste disposal methods: dispose of in accordance with federal, state &
local regulations. Before attempting to clean-up, refer to hazard
caution information in other sections.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: mineral spirits (vp 2.0 mmhg @ 68f)
cas: 64742-47-8
fraction by wt: 98%
other rec limits: none specified
osha pel: 500 ppm
acgih tlv: 125 ppm
ingred name: mineral spirits (vp 2.0 mmhg @ 68f)
cas: 68515-25-3
fraction by wt: 2%
other rec limits: none specified
osha pel: 500 ppm
acgih tlv: 125 ppm
Ld50 lc50 mixture: oral: >8ml/kg derm: 74ml/kg inhal: 13700ppm
routes of entry: inhalation: yes skin: yes ingestion: yes
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: inhale: nasal and respiratory
irritation, dizziness, weakness, fatigue, nausea, headache,
possible unconsciousness and even asphyxiation. Skin: can cause
defatting, drying, irritation & dermatitis. Ey e: can cause severe
irritation, redness, tearing and blurred vision. Ingest: can cause
gastrointestinal irritation,
explanation of carcinogenicity: none of the materials in this product is
on the iarc, ntp or osha carcinogen list.
effects of overexposure: nausea, vomiting and diarrhea. Aspiration of
material into lungs can cause chemical pneumonitis which can be
fatal.
medical cond aggravated by exposure: reports state repeated & prolonged
occupational over-exposure to solvents with permanent brain &
nervous system damage. Intentional misuse by deliberately
concentrating/inhaling can be harmful/fatal.
First aid: inhale: remove victim from further exposure and restore
breathing, if required. Eye: flush eyes with water for at least 15
minutes while holding eyelids open. Skin: wash contaminated skin
with mild so ap and water. Ingest: do not induce vomiting. Obtain
medical attention immediately.
Hcc: f4
boiling pt: b.P. Text: 301 to 402f
vapor pres: >7.0 @ 38c
vapor density: 4.8
spec gravity: 0.91
ph: na
viscosity: c-e (gard.)
evaporation rate & reference: slower than n-bu ac
solubility in water: negligible
appearance and odor: thin liquid, mild odor
percent volatiles by volume: 49-50
Stability indicator/materials to avoid: yes
avoid contact with strong oxidizing agents, lewis or mineral acids.
stability condition to avoid: avoid excessive heat, open flame and all
ignition sources.
hazardous decomposition products: carbon monoxide and carbon dioxide are
produced on combustion.
Waste disposal methods: if unreclaimable, material & containers are
considered hazardous waste (epa d001). Dispose of at licensed waste
disposal company or incinerate w/approval of environmental
authority. Disposal must be i n accorance w/federal, state & local
regulations.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: s k solvent, mineral spirits mixture is made of the
following: solvent 390 and benzene (see below)
other rec limits: none specified
osha pel: 525 mg/m3
acgih tlv: 100 ppm
ingred name: solvent 390
cas: 8052-41-3
rtecs #: wj8925000
fraction by wt: 100%
other rec limits: none specified
osha pel: 500 ppm
acgih tlv: 100 ppm; 9293
ingred name: ppm benzene ( rat oral: > 5600.0 ml/kg; inhale: 13700.0
ppm 4 hours)
cas: 71-43-2
rtecs #: cy1400000
fraction by wt: < 10%
other rec limits: none specified
epa rpt qty: 10 lbs
dot rpt qty: 10 lbs
Ld50 lc50 mixture: (rat) oral=>8.0 ml/kg; dermal=74 ml/kg
routes of entry: inhalation: yes skin: yes ingestion: yes
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: inhalation: excessive inhalation of
vapor can cause nasal and respiratory irritation, dizziness,
weakness, fatigue, nausea, headache, possible unconsciousness &
even asphyixiation. Skin: prolonged & r epeated contact w/skin can
cause defatting & drying of the skin resulting in skin irritation &
dermatitis.
explanation of carcinogenicity: inhalation +71400.0 ppm 4 hours
effects of overexposure: eye: severe irritation, redness, tearing &
blurred vision. Ingestion: gastrointestinal irritation, nausea,
vomiting & diarrhea. Aspiration of material into lungs can cause
chemical pneumonitis which c an be fatal. Reports associate
overexpos to solvents w/permanent brain & nervous system damage.
may be harmful/fatal.
First aid: inhalation: remove victim from further exposure and restore
breathing, if required. Eye: flush eyes with water for at least 15
minutes while holding eyelids open. Skin: wash contaminated skin
w/mild s oap & water. Ingestion: do not induce vomiting. Obtain
medical attention immediately.
Hcc: f4
boiling pt: b.P. Text: 301 to 402f
vapor pres: >7 @ 38 c
vapor density: 4.8
spec gravity: 0.91
viscosity: *
evaporation rate & reference: < than n-butyl acetate
solubility in water: negligible
appearance and odor: thin liquid, mild odor
percent volatiles by volume: 49-50
Stability indicator/materials to avoid: yes
avoid contact with strong oxidizing agents, lewis or mineral acids.
stability condition to avoid: avoid excessive heat, open flame and all
ignition sources.
hazardous decomposition products: carbon monoxide and carbon dioxide are
produced on combustion.
Waste disposal methods: treat cntnr & mat'l as hzds waste, d001, &
dispose of at a licensed waste disposal company or incinerate
w/approval of environ authority. All disposal procedures must
comply w/local, state and federal regulations.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: s k solvent, mineral spirits mixture
cas: 8052-41-3
rtecs #: wj8925000
fraction by wt: 100%
other rec limits: none specified
osha pel: 500 ppm
acgih tlv: 100 ppm; 9293
Ld50 lc50 mixture: rat: oral >8 ml/kg. Inhal +71400 ppm/r hr
routes of entry: inhalation: yes skin: yes ingestion: yes
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: acute; inhal: nasal & resp irrit,
dizzy, weak, fatigue, nausea, headache, unconscious, asphyxiation.
eye: severe irrit, red, tear, blurred vision. Ingest: gi irrit,
nausea, vomit, diarrhea. Aspiration into lungs can cause chemical
pneumonitis (can be fatal). Concentrating & inhaling product may be
harmful or fatal.
effects of overexposure: chronic; skin contact: prolonged and repeated
contact with skin can cause defatting and drying of the skin
resulting in skin irritation and dermatitis. Reports have
associated repeated and prolonged o ccupational overexposure to
solvent with permanent brain and nervous system damage.
First aid: inhalation: remove victim from further exposure and restore
breathing if required. Eye: flush eyes with water for at least 15
minutes, holding eyelids open. Skin: wash with mild soap & water.
ingestio n: dont induce vomiting. Get med aid immediately. Note to
physician: main hazard following ingestion is aspiration of liquid
to lungs producing chemical pneumonitis. Cardiac arrythmias
reported.
Hcc: f4
boiling pt: b.P. Text: 301 to 402f
vapor pres: >7.0 @ 38c
vapor density: 4.8
spec gravity: 0.91 (water=1)
viscosity: 10"-25" #4fc
evaporation rate & reference: slower than n-butyl ac
solubility in water: negligible
appearance and odor: thin liquid, mild odor
percent volatiles by volume: 49-50
Stability indicator/materials to avoid: yes
avoid contact with strong oxidizing agents, lewis or mineral acids.
hazardous decomposition products: carbon monoxide and carbon dioxide are
produced on combustion.
Waste disposal methods: if not possible to reclaim, treat as hazardous
waste (epa waste #d001) based on ignitability. All disposal
procedures must comply with local, state and federal regulations.
refer to hazard caution inf ormation in other sections of this
msds.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: sk solvent (mineral spirits mixture) solvent 390
cas: 8052-41-3
rtecs #: wj8925000
fraction by wt: 100%
other rec limits: none specified
osha pel: 500 ppm
acgih tlv: 100 ppm; 9293
ingred name: benzene, < 10 ppm (sara iii)
cas: 71-43-2
rtecs #: cy1400000
other rec limits: none specified
epa rpt qty: 10 lbs
dot rpt qty: 10 lbs
ingred name: voc: 448 g/l
rtecs #: 9999999vo
other rec limits: none specified
Routes of entry: inhalation: yes skin: yes ingestion: yes
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: inhal: nasal & resp irritation,
dizziness, fatigue, nausea, headache, unconsciousness,
asphyxiation. Skin: irritation. Eye: severe irritation, redness,
tearing, blurred vision. Absorption: may contrib ute to overall
exposure. Ingest: gastrointestinal irrit, nausea, vomiting,
diarrhea. Aspiration into lungs may be fatal.
effects of overexposure: acute: irritation of skin, eyes, mucous
membranes, drying, defatting of skin. Avoid ingestion and breathing
of vapors. Chronic: eye, liver, kidney, and central nervous system
damage may occur.
medical cond aggravated by exposure: may provoke asthmatic response in
persons with asthma who are sensitive to airway irritant.
First aid: if spilled on the skin or in the eye, wash with copious
quantities of water, contact physician if spilled in the eye. If
ingested, do not induce vomiting, keep person warm, quiet and
contact physician . Breathing: remove person to fresh air. Give
oxygen if breathing difficult; give artificial respiration if
breathing stops. Keep person warm and get medical help.
Boiling pt: b.P. Text: 281 to 388f
vapor density: > air
spec gravity: 0.91 (water=1)
evaporation rate & reference: slower than ether
solubility in water: not soluble in water
appearance and odor: transparent amber liquid with mineral spirits
solvent odor.
Stability indicator/materials to avoid: yes
avoid contact with strong oxidizing agents.
stability condition to avoid: never use welding or cutting torch on or
near drums (even empty) because product (even residue) can ignite
explosively.
Waste disposal methods: small: allow volatile part to evaporate in hood
(allow time for vapor to clear hood duct work).Dispose of remaining
mat'l in accord w/regs. Large: destroy by liq
incineration.Contaminated absorbnt may b e put in landfill in
accord w/fed,state,local regs
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: mineral spirits (sara iii) (vapor pressure 2 mm hg @ 68f)
cas: 64475-85-0
rtecs #: py8240000
fraction by wt: 45%
other rec limits: none recommended
osha pel: 500 ppm
acgih tlv: 100 ppm
Routes of entry: inhalation: yes skin: yes ingestion: yes
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: direct contact to eye may cause
irritation. Prolonged/repeated contact may cause skin irritation.
inhalation may lead to lung changes,nausea,vomiting,cough,pulmonary
irritation,central nervous system depression. Ingestion may cause
gi disturbances. Aspiration of product may cause pneumonitis
pulmonary edema & hemorrage
effects of overexposure: inhalation: drowsiness, dizziness, fatigue,
coma. Eye: irritation. Skin: prolonged/repeated may cause
irritation/dermatitis, defatting, absorbed through skin. Ingestion:
aspiration of this product int o the lungs may cause pneumonitis,
pulmonary edema and hemorrage. Ingestion may cause gastrointestinal
disturbances.
medical cond aggravated by exposure: individuals with pre-existing
diseases in or history of ailments involving skin, central nervous
system, liver and kidney.
First aid: eye contact: immediately flush with large amounts of water
for 15 mintues. Seek medical aid. Do not induce vomiting. Do not
attempt to give anything by mouth to an unconscious person.
Boiling pt: b.P. Text: 334f,168c
vapor density: > air
spec gravity: 0.9 (h2o=1)
viscosity: c-e gardner-*
evaporation rate & reference: slower than ether
solubility in water: essentially nil
appearance and odor: clear viscous liquid with typical paint odor
percent volatiles by volume: 50.7
Stability indicator/materials to avoid: yes
strong oxidizing agents
stability condition to avoid: flames, sparks, smoking, and heat
hazardous decomposition products: carbon monoxide and carbon dioxide
Waste disposal methods: use inert absorbent material on spills. Dispose
of in accordance with all federal, state, and local regulations.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: aliphatic hydrocarbons (stoddard type) (vapor pressure 2.0
mm hg @ 68f) (sara iii)
cas: 8052-41-3
rtecs #: wj8925000
fraction by wt: 39%
other rec limits: none recommended
osha pel: 100 ppm
acgih tlv: 100 ppm
ingred name: voc: 3.32 lb/gl (398 g/l)
rtecs #: 9999999vo
other rec limits: none recommended