Worldwide distributor of NSN parts and consumables located in the USA.
A paint whose basic vehicle is a synthetic polymer in water emulsion form. Excludes paint, antifouling; and paint, rubber.
Send us a request for quote using the form below. Our team will contact you with an up to date pricing and availability quote ASAP.
Paints and varnishe (incl enamels & lacquers) based on synthetic polymers, etc, in a nonaqueous medium, based on acrylic or vinyl polymers
Paints and varnishes (including enamels and lacquers) based on synthetic or chemically modified natural polymers, nonaqueous; plastics in solution
Chemicals-other
Y - Indicates information is in the hazardous materials information resource system (hmirs).
PMICA - Item does not contain precious metal.
ENACGR - Architectural coatings
CRITL- The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
149980 - Paint and related materials
620 - Paint, in individual containers less than 10 cubic ft
9 - Other or no special handling required (sh)
A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
B - Construction materials: includes paint and related materials, prefabricated building, wood products, metal and composition mater
R - Flammable liquids, un class 3 (flammable liquids label)
W - Rating variable
Questions & Answers: |
|
What are the historical prices recorded for this stock number? | |
Historical data shows pricing from $281.64 to $469.40.. | |
Does NSN 8010-00-418-4670 have a shelf life? | |
No. There is no shelf life applicable for this NSN. | |
What NATO entities are users of this NSN? | |
Department Of The Air Force, Department Of The Navy, and General Services Administration | |
What is the NIIN of NSN 8010-00-418-4670? | |
004184670 or 00-418-4670 | |
Does NSN 8010-00-418-4670 require demilitarization? | |
Yes - ITAR Controlled | |
What is the most recent solicitation for NSN 8010-00-418-4670? | |
No solicitations for this NSN. | |
When was this national stock number assigned to the federal catalog? | |
Nov 25, 1970 |
Effects of overexposure: none
First aid: if swallowed, induce vomitingk, call physician. Rinse eyes
with water.
Hcc: n1
boiling pt: b.P. Text: 212f 100c
spec gravity: 1.38
solubility in water: complete
appearance and odor: bland, slightly ammoniacal odor. Opaque liquid
percent volatiles by volume: 58.0
Stability indicator/materials to avoid: yes
Waste disposal methods: dispose of in accordance with local, state and
federal regulations.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: pigment
fraction by wt: 37.0%
acgih tlv: no hazard
ingred name: water
cas: 7732-18-5
rtecs #: zc0110000
fraction by wt: 43.5%
acgih tlv: no hazard
ingred name: acrylic resin
fraction by wt: 19.5%
acgih tlv: no hazard
Routes of entry: inhalation: yes skin: yes ingestion: yes
effects of overexposure: inhl: health effect from vapors/spray mists in
poorly vent areas may include irritation of mucous membranes of the
nose,throat & respiratory tract & symptoms of headache & nausea.
skin/eye: prolonged e xposure to product may cause
irritation.Direct contact w/product may result in eye irritation.
First aid: inhl: remove subject to fresh air. Skin/eye:
promptly/thoroughly wash eyes w/wtrfor 15 min. Consult dr if
irritation persists. Remove contaminated clothing washskin w/soap
and water, wash clothing bef ore reuse. Ingst: if victim is
consciousgive two glasses of water to drink/call physican. Donot
give anything to an unconscious person.
Boiling pt: b.P. Text: 212f/100c
vapor density: < air
ph: 8.59.5
evaporation rate & reference: slower than air
solubility in water: complete
percent volatiles by volume: 59.4
Stability indicator/materials to avoid: yes
nk
hazardous decomposition products: when product is heated may produce
fumes that contain carbonmonoxide/dioxide.
conditions to avoid polymerization: high temperatures
Waste disposal methods: dispose of in accordance w/federal,state & local
regulation. Before attempting clean up. Refer to hazard caution
information in other section.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: ethylene glycol (sara iii)
cas: 107-21-1
rtecs #: kw2975000
fraction by wt:
osha pel: c 50 ppm
acgih tlv: c 50 ppm,vapor; 9192
epa rpt qty: 1 lb
dot rpt qty: 1 lb
ingred name: ammonia
(vapor pressure 755.0 mm hg @ 80f)
cas: 13362-12-6
fraction by wt: < 1%
osha pel: 50
acgih tlv: 25 ppm
Routes of entry: inhalation: yes skin: yes ingestion: yes
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: none
effects of overexposure: inhal: vapor or spray mist can cause headache,
nausea, irri of nose, throat and lungs. Eyes: possibly irritating
to eyes. Skin: slightly irritating to skin. Andingestion:
prolonged/repeated contact ma y cause irritation to the
digestiontract.
medical cond aggravated by exposure: none
First aid: move subject to fresh air. Flush eyes with large amounts of
water. Wash skin areas with soap and water.
Boiling pt: b.P. Text: 212 f
vapor pres: 17
vapor density: 1 water
spec gravity: 1.42
solubility in water: dilutable
appearance and odor: white-latex paint
Na
stability condition to avoid: na
hazardous decomposition products: na
Waste disposal methods: coagulate the paint by the stepwise addition of
ferric chloride & lime. Remove the clear supernatantliq & flush to
a chem sewer. Landfill the solids &the contam diking material
according to local, state and federal regulations.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: acrylic polymer
osha pel: ne
acgih tlv: ne
ingred name: titanium dioxide
cas: 1317-80-2
osha pel: na
acgih tlv: 10 mg/cu.M.
Reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: inhal: nasal & respiratory irritation,
dizziness, weakness, fatigue, nausea, headache, unconsciousness,
asphyxiation. Skin: repeated/prolonged contact causes irritation,
defatting, dermatitis. Eye: ir ritation. Ingestion: gi irritation,
nausea, vomiting, diarrhea. Aspiration into lungs can cause chem
pneumonitis.
effects of overexposure: chronic overexposure of components has been
found to cause the following effects in lab animals; anemia, liver
abnormalities, kidney damage, eye damage. Overexposure has been
suggested as a cause of t he following effects in humans:
cardiacabnormality.
medical cond aggravated by exposure: pulmonary condition
First aid: on skin: thoroughly wash exposed area with soap and water.
remove contaminated clothing. If in eyes: flush with large amounts
of water, lifting upper and lower lids occasionally. Get medical
attention . If breathed: if affected, remove individual to fresh
air, if breathing is difficult, administer oxygen. Keep person warm
and quiet and get medical attention.
Hcc: n1
boiling pt: b.P. Text: 387 to 490f
vapor density: > air
spec gravity: 1.3 (water=1)
evaporation rate & reference: slower than ether
solubility in water: soluble
appearance and odor: viscous liquid, slight solvent odor
Stability indicator/materials to avoid: yes
hazardous decomposition products: thermal decomposition may yield
acrylic monomer.
Waste disposal methods: 1.Recycle if feasible. 2.Incinerate at
authorized facility. 3.Treat at industrial/liquid waste facility.
4.Landfill after solidification in authorized facility. Material
classified hazardous waste & s hould be disposed in accordance with
regulations.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: ethylene glycol (sara iii) (vapor pressure 0.1 mm hg @
64f)
cas: 107-21-1
rtecs #: kw2975000
fraction by wt: 2%
other rec limits: none specified
acgih tlv: 50 ppm
epa rpt qty: 1 lb
dot rpt qty: 1 lb
ingred name: texanol ester alcohol (vapor pressure 125.0 mm hg @ 64f)
fraction by wt:
other rec limits: none specified
osha pel: 100 ppm
acgih tlv: 50 ppm
ingred name: coating voc: 0.88 lb/gl (105 g/l)
rtecs #: 9999999vo
other rec limits: none specified