NationalStockNumber.INFO
Worldwide distributor of NSN parts and consumables located in the USA.
Worldwide distributor of NSN parts and consumables located in the USA.
A material which produces a nonslip surface on such areas as flight decks, walkways, other floor areas, and the like. Excludes deck and floor covering surface compound.
Send us a request for quote using the form below. Our team will contact you with an up to date pricing and availability quote ASAP.
Organic compounds nesoi
Organic compounds, n.E.S.
Chemicals-organic
Y - Indicates information is in the hazardous materials information resource system (hmirs).
PMICA - Item does not contain precious metal.
CRITL- The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
149980 - Paint and related materials
620 - Paint, in individual containers less than 10 cubic ft
9 - Other or no special handling required (sh)
A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
B - Construction materials: includes paint and related materials, prefabricated building, wood products, metal and composition mater
U - Combustible liquids (no label)
W - Rating variable
Questions & Answers: |
|
| What are the historical prices recorded for this stock number? | |
| Historical data shows pricing from $662.18 to $1,103.63.. | |
| Does NSN 8010-00-519-1852 have a shelf life? | |
| No. There is no shelf life applicable for this NSN. | |
| What NATO entities are users of this NSN? | |
| Turkey | |
| What is the NIIN of NSN 8010-00-519-1852? | |
| 005191852 or 00-519-1852 | |
| Does NSN 8010-00-519-1852 require demilitarization? | |
| Yes - ITAR Controlled | |
| What is the most recent solicitation for NSN 8010-00-519-1852? | |
| No solicitations for this NSN. | |
| When was this national stock number assigned to the federal catalog? | |
| Aug 19, 1974 | |
Effects of overexposure: inhalation-may cause nausea. Skin contact-may
cause irritation.
First aid: if overcome by vapor-remove from area;call physician.
skin-wash with soap and water. Eyes-flush with large volume of
water and consult physician.
Hcc: f4
boiling pt: b.P. Text: 266f;108c
vapor pres: 8.9
vapor density: 3.4
spec gravity: 1.9
evaporation rate & reference: buac
solubility in water: negligible
appearance and odor: opaque liquid; aromatic odor
percent volatiles by volume: 0.72
Stability indicator/materials to avoid: yes
strong acids, amines and bases.
stability condition to avoid: heat and open flame.
conditions to avoid polymerization: open flame.
Waste disposal methods: incinerate in furnace.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: solvents
fraction by wt: 10.0%
acgih tlv: 100 ppm
ingred name: fillers
fraction by wt: 60.0%
ingred name: vehicle
fraction by wt: 15.0%
ingred name: pigment
fraction by wt: 5.0%
Effects of overexposure: non-toxic,except for possible irritation of
throat,eyes watering and nose irritation.
First aid: wash contaminated area clean,first w/alcohol and then w/soap
and water.Incase of contact w/eyes,flush w/plenty of water and
consult dr.
Hcc: f4
boiling pt: b.P. Text: 225-230f
vapor pres: 8-1
vapor density: 2.55
spec gravity: 0.94
evaporation rate & reference: not yet known
solubility in water: negligible
appearance and odor: amber liquid w/odor of ammonia
percent volatiles by volume: 58
Stability indicator/materials to avoid: yes
stability condition to avoid: extreme heating of container,area,not well
ventilated
hazardous decomposition products: thermal decomposition may prod.Oxides
of carbon and nitrogen
Waste disposal methods: incinerate in a furnace.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: polyamide
ingred name: catalyst
fraction by wt: 45%
ingred name: solvents
fraction by wt: 55%
acgih tlv: 100ppm
Effects of overexposure: inhal: headache, nausea, dizziness. Skin:
repeated/prolonged contact may cause irritation.
First aid: inhal: remove to fresh air. Skin: flush with large amts water
& remove contaminated clothing. Eye: flush with clean water 15 min
& call physician.
Hcc: f3
boiling pt: b.P. Text: 200-260f
spec gravity: 2.04
appearance and odor: gray mobile liquid
percent volatiles by volume: 26
Stability indicator/materials to avoid: yes
oxidizers; softens rubber
hazardous decomposition products: carbon monoxide; carbon dioxide
Waste disposal methods: dispose of in closed containers away from
ignition sources.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: methyl n-butyl ketone (2-hexanone)
cas: 591-78-6
rtecs #: mp1400000
fraction by wt: 5%
osha pel: 100 ppm
acgih tlv: s, 5 ppm; 9293
ingred name: 2-ethoxyethanol (egee) (sara iii)
cas: 110-80-5
rtecs #: kk8050000
fraction by wt: 5%
osha pel: s,200 ppm
acgih tlv: s, 5 ppm; 9192
epa rpt qty: 1000 lbs
dot rpt qty: 1000 lbs
ingred name: tri methylol phenol
fraction by wt: 1%
ingred name: pigments
fraction by wt: 68%
ingred name: vehicle
fraction by wt: 21%
Effects of overexposure: skin/eye: irritation. Inhalation: irritation of
respiratory tract,headache,nausea,dizziness
First aid: eye: flush with water 15 min,call physician. Skin: flush with
water,remove contaminated clothing. Inhalation: remove to fresh
air. Ingestion: call physician immediately.
Hcc: f4
boiling pt: b.P. Text: 150f/65c
vapor density: >1
evaporation rate & reference: slower than ether
percent volatiles by volume: 34
Stability indicator/materials to avoid: yes
oxidizing materials,rubber softens
hazardous decomposition products: co,co*2,oxides of nitrogen
Waste disposal methods: dispose of in accordance with local,state and
federal regulations. Inclinerate only in approved facility. Do not
incinerate closed containers.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: naphta (petroleum spirits or benzin)
cas: 8030-30-6
rtecs #: de3030000
fraction by wt:
osha pel: 100 ppm
ingred name: xylenes (o-,m-,p- isomers) (sara iii)
cas: 1330-20-7
rtecs #: ze2100000
fraction by wt: 10%
osha pel: 100 ppm/150 stel
acgih tlv: 100 ppm/150stel;9192
epa rpt qty: 1000 lbs
dot rpt qty: 1000 lbs
ingred name: n-butyl alcohol (sara iii)
cas: 71-36-3
rtecs #: eo1400000
fraction by wt:
osha pel: 100 ppm
acgih tlv: s, c 50 ppm; 9293
epa rpt qty: 5000 lbs
dot rpt qty: 5000 lbs
ingred name: methyl alcohol (methanol) (sara iii)
cas: 67-56-1
rtecs #: pc1400000
fraction by wt:
osha pel: s,200ppm/250stel
acgih tlv: s,200ppm/250stel; 93
epa rpt qty: 5000 lbs
dot rpt qty: 5000 lbs
ingred name: 2,4,6 - tri(dimethylaminomethyl)phenol
cas: 90-72-2
rtecs #: sn3500000
fraction by wt:
Routes of entry: inhalation: yes skin: yes ingestion: yes
reports of carcinogenicity: ntp: yes iarc: yes osha: yes
health hazards acute and chronic: acute: inhalation: irritation
respiratory tract; headache, nausea, dizziness, weakness, fatigue.
extreme exposure result in unconsciousness & even respiratory
arrest. Skin/eye: irritation. Harmful abs orb through skin. Causes
skin burns.Ingestion: stomach and/or intestinal irritation, nausea,
vomiting, diarrhea.
explanation of carcinogenicity: silica is listed w/iarc as a class 2a
carcinogen. Contains crystalline silica cause lung damage &
cancer;depend. Exposur
effects of overexposure: chronic: reports have associated repeated &
prolonged occupational overexposure to solvents with permanent
brain & nervous system damage. Prolonged or repeated breathing of
spray mist &/or sanding dus t over a period of years may cause
dustdisease of the lungs.
medical cond aggravated by exposure: none, when used in accordance with
safe handling and use information (see section viii).
First aid: inhalation: if you experience difficulty in breathing, leave
the area to obtain fresh air. If persists get medical attention.
eyes: flush with large amounts of water for 15 minutes. Get medical
attent ion. Skin: wash affected areas soap & water. Remove soiled
clothing. Get medical attention if irritation persists. Ingestion:
consult a physician immediately. Do not induce vomiting.
Hcc: f4
boiling pt: b.P. Text: 266 to 279f
vapor density: > air
evaporation rate & reference: < ether
percent volatiles by volume: 61.75
Stability indicator/materials to avoid: yes
avoid contact with strong oxidizing agents.
stability condition to avoid: keep away from heat, sparks, & flames. Do
not smoke. Extingquish all pilot lights & turn off all sources of
ignition.
hazardous decomposition products: may cause toxic fumes when heated to
decompostion. Fumes may contain carbon monoxide, carbon dioxide,
oxides of nitrogen
Waste disposal methods: dispose of in accordance with local, state &
federal regulations. Incinerate only in approved facility. Do not
incinerate closed containers.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: 2,4,6-tris(dimethylaminomethyl) phenol
cas: 90-72-2
rtecs #: sn3500000
fraction by wt: 10%
other rec limits: none specified
ingred name: amine compound
fraction by wt: 30%
other rec limits: none specified
ingred name: crystalline silica
cas: 112945-52-5
rtecs #: vv7310000
fraction by wt: < .5%
other rec limits: none specified
osha pel: 0.1 mg/m3 (resp)
acgih tlv: 0.1 mg/m3 (resp)
ingred name: xylene
cas: 1330-20-7
rtecs #: ze2100000
fraction by wt: 55%
other rec limits: none specified
osha pel: 100 ppm
acgih tlv: 100 ppm
epa rpt qty: 1000 lbs
dot rpt qty: 1000 lbs
ingred name: voc: 530.35 g/l
rtecs #: 9999999vo
other rec limits: none specified
Routes of entry: inhalation: yes skin: yes ingestion: yes
reports of carcinogenicity: ntp: yes iarc: yes osha: yes
health hazards acute and chronic: acute: inhalation: irritation
respiratory tract; headache, nausea, dizziness, weakness, fatigue.
extreme exposure result in unconsciousness & even respiratory
arrest. Skin/eye: irritation. Harmful abs orb through skin. Causes
skin burns. Ingestion: stomach and/or intestinal irritation,
nausea, vomiting, diarrhea.
explanation of carcinogenicity: silica is listed w/iarc as a class 2a
carcinogen. Contains crystalline silica cause lung damage &
cancer;depend. Exposur
effects of overexposure: chronic: reports have associated repeated &
prolonged occupational overexposure to solvents with permanent
brain & nervous system damage. Prolonged or repeated breathing of
spray mist &/or sanding dus t over a period of years may cause
dustdisease of the lungs.
medical cond aggravated by exposure: none, when used in accordance with
safe handling and use information (see section viii).
First aid: inhalation: if you experience difficulty in breathing, leave
the area to obtain fresh air. If persists get medical attention.
eyes: flush with large amounts of water for 15 minutes. Get medical
attent ion. Skin: wash affected areas soap & water. Remove soiled
clothing. Get medical attention if irritation persists. Ingestion:
consult a physician immediately. Do not induce vomiting.
Hcc: f4
boiling pt: b.P. Text: 244 to 306f
vapor density: > air
evaporation rate & reference: < ether
percent volatiles by volume: 25.67
Stability indicator/materials to avoid: yes
avoid contact with strong oxidizing agents.
stability condition to avoid: keep away from heat, sparks, & flames. Do
not smoke. Extingquish all pilot lights & turn off all sources of
ignition.
hazardous decomposition products: may cause toxic fumes when heated to
decompostion. Fumes may contain carbon monoxide, carbon dioxide,
oxides of nitrogen
Waste disposal methods: dispose of in accordance with local, state &
federal regulations. Incinerate only in approved facility. Do not
incinerate closed containers.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: alpha-alumina (aluminum oxide)
cas: 1344-28-1
rtecs #: bd1200000
fraction by wt: 65%
other rec limits: none specified
osha pel: 15 mg/m3 tdust
acgih tlv: 10 mg/m3 tdust; 9293
ingred name: silica, amorphous hydrated (pigment)
cas: 112945-52-5
rtecs #: vv7310000
fraction by wt: 10%
other rec limits: none specified
osha pel: 0.1 mg/m3 (resp)
acgih tlv: 0.1 mg/m3 (resp)
ingred name: epoxy resin
cas: 25068-38-6
rtecs #: kc2100000
fraction by wt: 10%
other rec limits: none specified
ingred name: high flash aromatic naphtha
cas: 64742-95-6
fraction by wt: < 5%
other rec limits: none specified
acgih tlv: 100 ppm
ingred name: titanium dioxide
cas: 13463-67-7
rtecs #: xr2275000
fraction by wt: < 5%
other rec limits: none specified
osha pel: 15 mg/m3 tdust
acgih tlv: 10 mg/m3 tdust; 9293
ingred name: xylenes (o-,m-,p- isomers)
cas: 1330-20-7
rtecs #: ze2100000
fraction by wt: 5%
other rec limits: none specified
osha pel: 100 ppm
acgih tlv: 100 ppm
epa rpt qty: 1000 lbs
dot rpt qty: 1000 lbs
ingred name: n-butyl alcohol
cas: 71-36-3
rtecs #: eo1400000
fraction by wt: < 5%
other rec limits: none specified
osha pel: 100 ppm
acgih tlv: s, c 50 ppm; 9293
epa rpt qty: 5000 lbs
dot rpt qty: 5000 lbs
Routes of entry: inhalation: yes skin: yes ingestion: yes
health hazards acute and chronic: eyes: irritant aggregate may cause
injury. Skin: may cause moderate irritation and sensitization.
inhalation: vapors may cause headaches, nausea, dizziness and
respiratory tract irritation. Ingestion: no specific information
available, contains materials that may be slightly toxic.
effects of overexposure: irritation, sensitization and dermatitis.
medical cond aggravated by exposure: allergy, eczema and other skin
conditions.
First aid: eyes: flush with large quantities of water for at least 15
minutes.Get medical attention. skin: remove contaminated
clothing. Wash contact area with mild soap and water. Inhalation:
remove to fresh air. Ifbreathing has stopped, administer
artificial respiration and seek medical attention. Ingestion: do
not induce vomiting. (contains solvent). Get medical attention.
Spec gravity: 0.96
solubility in water: partially soluble
appearance and odor: amber liquid, solvent odor
Stability indicator/materials to avoid: yes
strong oxidizing agents.
stability condition to avoid: excessive heat.
hazardous decomposition products: carbon monoxide, carbon dioxide and
oxides of nitrogen.
conditions to avoid polymerization: will not occur.
Waste disposal methods: dispose of in a licensed hazardous waste
facility in accordance with applicable laws.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: polyamide/epoxy adduct
cas: 68424-41-9
code: f
minumum % wt: 60.
maxumum % wt: 70.
ingred name: amidoamine resin
cas: 68443-08-3
code: f
= wt: 16.
ingred name: 1-methoxy-2-propanol
cas: 107-98-2
rtecs #: ub7700000
minumum % wt: 10.
maxumum % wt: 25.
acgih tlv: 369 mg/m3;100 ppm
acgih stel: 553 mg/m3;150 ppm
Routes of entry: inhalation: yes skin: yes ingestion: yes
health hazards acute and chronic: eyes: causes severe irritation or
burns, may cause permanent visual impairment. Skin: cause severe
irritation or burns, may be absorbed through skin in harmful
amounts. inhalation: may cause upper re spiratory tract
irritation. ingestion: may cause burns of mouth and throat.
contains material that may be slightly toxic.
effects of overexposure: irritation, sensitization and dermatitis.
medical cond aggravated by exposure: allergy, eczema and other skin
conditions.
First aid: eyes: flush with large quantities of water for at least 15
minutes. Skin: remove contaminated clothing. Wash contact area with
mild soap and water. Inhalation: remove to fresh air. If symptoms
persist consult a physician. Ingestion: do not induce vomiting. If
conscious, give large quantities of water to dilute.
Spec gravity: 0.96
solubility in water: partially soluble
appearance and odor: amber liquid, solvent odor
Stability indicator/materials to avoid: yes
strong oxidizing agents.
stability condition to avoid: excessive heat.
hazardous decomposition products: carbon monoxide, carbon dioxide and
oxides of nitrogen.
conditions to avoid polymerization: will not occur.
Waste disposal methods: dispose of in a licensed hazardous waste
facility in accordance with applicable laws.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: polyamide/epoxy adduct
cas: 68424-41-9
code: f
minumum % wt: 60.
maxumum % wt: 70.
ingred name: amidoamine resin
cas: 68443-08-3
code: f
= wt: 16.
ingred name: 1-methoxy-2-propanol
cas: 107-98-2
rtecs #: ub7700000
minumum % wt: 10.
maxumum % wt: 25.
acgih tlv: 369 mg/m3;100 ppm
acgih stel: 553 mg/m3;150 ppm