NationalStockNumber.INFO
Worldwide distributor of NSN parts and consumables located in the USA.
Worldwide distributor of NSN parts and consumables located in the USA.
A straight or blended run of petroleum naphthas with aniline point of not less than 100 degrees fahrenheit (37.98 celsius), or hydrocarbons of intermediate solvent powder used in thinning paints, varnish, enamel and other coating compounds. Excludes naptha (as modified), specific chemicals, thinner used in ink, sealing compounds and adhesives.
Send us a request for quote using the form below. Our team will contact you with an up to date pricing and availability quote ASAP.
Organic composite solvents and thinners, not elsewhere specified or included; prepared paint or varnish removers
Organic composite solvents and thinners, n.E.S.; prepared paint or varnish removers
Chemicals-other
Y - Indicates information is in the hazardous materials information resource system (hmirs).
PMICA - Item does not contain precious metal.
CRITL- The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Questions & Answers: |
|
| What are the historical prices recorded for this stock number? | |
| No pre-dated pricing for this NSN could be found. | |
| Does NSN 8010-00-597-5251 have a shelf life? | |
| No. There is no shelf life applicable for this NSN. | |
| What NATO entities are users of this NSN? | |
| Tennessee Valley Authority, and Belgium | |
| What is the NIIN of NSN 8010-00-597-5251? | |
| 005975251 or 00-597-5251 | |
| Does NSN 8010-00-597-5251 require demilitarization? | |
| Yes - ITAR Controlled | |
| What is the most recent solicitation for NSN 8010-00-597-5251? | |
| No solicitations for this NSN. | |
| When was this national stock number assigned to the federal catalog? | |
| Jan 01, 1963 | |
Ld50 lc50 mixture: tlv for oil mist is 5 mg/m3.
routes of entry: inhalation: yes skin: no ingestion: no
reports of carcinogenicity: ntp: no iarc: no osha: no
explanation of carcinogenicity: none
effects of overexposure: irritation, drowsiness, dizziness, nausea,
vomiting, headache, redness, tearing, blurred vision, defatting,
fatigue
medical cond aggravated by exposure: individuals with pre-existing
diseases of the eye, skin, respiratory tract, cns may have
increased susceptibility to the toxicity of excessive exposures.
First aid: get medical help if symptoms persist. Inhaled: remove to fresh
air. Provide cpr/oxygen if needed. Eyes: flush with water for 15
minutes. Hold eyelids open. Skin: wash with soap & water. Oral: do
not induc e vomiting. Seek medical attention. Keep at rest. If
vomiting occurs, keep head below hips to prevent aspiration.
Hcc: f4
nrc/state lic num: not relevant
boiling pt: b.P. Text: 315f - 397f
melt/freeze pt: m.P/f.P text: -4f,-20c
vapor pres: 6 @ 68f
vapor density: 3.90
spec gravity: 0.79
viscosity: 1.1 cst @ 77f
evaporation rate & reference:
solubility in water:
appearance and odor: clear, colorless liquid - petroleum hydrocarbon
odor
Stability indicator/materials to avoid: yes
strong oxidizing agents, halogens, molten sulfur
stability condition to avoid: heat, sparks, flames and other sources of
ignition
hazardous decomposition products: carbon monoxide, carbon dioxide,
fumes, smoke may be formed.
Waste disposal methods: reclaim by distillation or incinerate absorbed
materials in a licensed hazardous waste facility. Disposal should
be in accordance with all local, state and federal regulations.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: petroleum hydrocarbons
other rec limits: none recommended
osha pel: 5 mg/m3 (oil mist)
acgih tlv: 5 mg/m3 (oil mist)
ingred name: trimethylbenzene
cas: 2551-14-5
other rec limits: none recommended
ingred name: stoddard solvent
cas: 64741-41-9
other rec limits: none recommended
osha pel: 5 mg/m3 as oil mist
acgih tlv: 5 mg/m3 as oil mist
Routes of entry: inhalation: yes skin: yes ingestion: yes
health hazards acute and chronic: eye: may cause severe
irritation,redness,tearing,blurred
vision&conjunctivitis.Skin: prolonged/repeated contact may cause
moderate
irritation,defatting(cracking)redness,itching,inflammation,dermatit
is,& possible secondary infection.High pressure skin injections are
serious medical emergencies.Injury may not appear
serious@first.Withinhours,tissues will become
swollen,dscolored&extremely painful.See n otes-physician.*
effects of overexposure: may cause irritation to eyes, skin and
respiratory system. avoid liquid, mist and vapor contact> harmful
or fatal if swallowed. aspiration hazard, can enter lungs and
cause damage. may cause irrit ation or be harmful if inhaled or
ablsorbed through the skin. flammable liquid. vapors may explode.
medical cond aggravated by exposure: preexisting eye, skin, heart,
central nervous system and respiratory disorders may be aggravated
by exposure to this product.
First aid: eye: flush immediately w/large amounts wate15minutes.Eyelids
should be held away f/eyeball-ensure thorough rinsing.Get medical
advice if pain/redness continues.Skin: wash exposed area thoroghly
w/soap&w ater.Remove contaminated clothing promptly&launder befor
reuse.Contaminated leather goods should be discarded.If irritation
persists/symptoms develop,get medical attention.High pressure skin
injection s are serious medical emergencies.Get immediate medical
attention.Inhalation: remove-fresh air.If breathing is
difficult,ensure clear airway&administer oxygen.***
Boiling pt: >154.4c, 310.F
b.P. Text: 310-400f
vapor pres: 0.1 psi @ 100'f
vapor density: >air
spec gravity: 0.77 @ 60'f
solubility in water: negligable
appearance and odor: white liquid/mild hydrocarbon odor.
percent volatiles by volume: moderate
Stability indicator/materials to avoid: yes
avoid strong oxidizing agents (peroxide, dichromate, permanganate,
chlorine, etc.) strong acids caustics and halogens.
stability condition to avoid: heat, sparks, open flame, static
electicity or any other potential ignition sources should be
avoided. prevent vapor accumulation. do not switch load.
hazardous decomposition products: co, co2 and reactive hydrocarbons
(aldehydes, aromatics, etc. ).
Waste disposal methods: dispose of material in accordance with local,
county, state and federal regulations. contact state and federal
regulatiors to determine whether the material should be classified
as a hasardous waste or industrial waste and handled accordingly.
use licensed transporters and disposal facility.
Ingred name: mineral spirits (stoddard solvent)
cas: 8052-41-3
rtecs #: wj8925000
other rec limits: niosh350mg/m3cl1800
osha pel: 500 ppm
acgih tlv: 100 ppmm
ingred name: n-nonane
cas: 111-84-2
rtecs #: ra6115000
minumum % wt: 1.
maxumum % wt: 6.
acgih tlv: 200 ppm
ingred name: n-octane
cas: 111-65-9
rtecs #: rg8400000
minumum % wt: 1.
maxumum % wt: 3.
other rec limits: niosh=twa75ppm/cl385
osha pel: 500 ppmm
acgih tlv: 300 ppmm
acgih stel: 475 ppm
ingred name: 1,2,4-trimethylbenzene
cas: 95-63-6
rtecs #: dc3325000
minumum % wt: 1.
maxumum % wt: 5.