Worldwide distributor of NSN parts and consumables located in the USA.
Pigment dispersed in a varnish vehicle containing natural or synthetic resin. The varnish may be modified with drying oil to the extent that the total drying oil content of the vehicle, including the oil in the varnish, does not exceed 75 percent, by weight, of the total nonvolatile portion of the vehicle. When applied in a thin layer, it dries principally by polymerization and/or oxidation to form a hard, smooth, opaque film. Excludes lacquer; enamel, heat resisting; bituminous and ceramic coatings and gold size.
Send us a request for quote using the form below. Our team will contact you with an up to date pricing and availability quote ASAP.
Paints and varnishe (incl enamels & lacquers) based on synthetic polymers, etc in a nonaqueous medium, nesoi
Paints and varnishes (including enamels and lacquers) based on synthetic or chemically modified natural polymers, nonaqueous; plastics in solution
Chemicals-other
Y - Indicates information is in the hazardous materials information resource system (hmirs).
PMICA - Item does not contain precious metal.
CRITL- The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
149980 - Paint and related materials
620 - Paint, in individual containers less than 10 cubic ft
9 - Other or no special handling required (sh)
A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
B - Construction materials: includes paint and related materials, prefabricated building, wood products, metal and composition mater
R - Flammable liquids, un class 3 (flammable liquids label)
W - Rating variable
Questions & Answers: |
|
What are the historical prices recorded for this stock number? | |
Historical data shows pricing from $159.77 to $266.29.. | |
Does NSN 8010-00-598-7214 have a shelf life? | |
No. There is no shelf life applicable for this NSN. | |
What NATO entities are users of this NSN? | |
Brazil | |
What is the NIIN of NSN 8010-00-598-7214? | |
005987214 or 00-598-7214 | |
Does NSN 8010-00-598-7214 require demilitarization? | |
Yes - ITAR Controlled | |
What is the most recent solicitation for NSN 8010-00-598-7214? | |
No solicitations for this NSN. | |
When was this national stock number assigned to the federal catalog? | |
Jan 01, 1963 |
Routes of entry: inhalation: yes skin: yes ingestion: yes
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: skin: irritation, sensitization,
defatting upon prolonged/repeated contact. Inhalation: excessive
exposure to vapors/mists can result in headache, dizziness, nausea,
& unconsciousness. Some reports as sociate repeated/prolonged
overexposurewith permanent brain & nervous system damage. Eye: may
be eye irritant.
medical cond aggravated by exposure: none when used in accordance with
safe handling instructions.
First aid: skin: promptly wash w/soap & water. Remove & wash
contaminated clothing before reuse. Eyes: flush w/large quantities
of water for 15 minutes & seek med aid. Swallowing: if ingested do
not induce vomit ing. Keep person warm, quiet, & get medaid.
aspiration into lungs can cause chemical pneumonitis which can be
fatal. Inhalation: remove to fresh air immed. If resp symptoms
develop, get med aid asap.
Boiling pt: b.P. Text: 307 to 390f
vapor pres: 2.6
vapor density: > air
evaporation rate & reference: slower than ether
solubility in water: nil
appearance and odor: oily liquid, color of tint
percent volatiles by volume: 55
Stability indicator/materials to avoid: yes
avoid contact with strong oxidants, acids, bases, and epoxy hardeners
under uncontrolled conditions.
stability condition to avoid: heat, sparks, open flames. If product
contains aluminum, moisture in closed containers will generate
hydrogen.
hazardous decomposition products: incomplete combustion can yield carbon
monoxide & toxic vapors.
Waste disposal methods: treat as hazardous wastes based on the
characteristic of ignitability as defined under federal rcra
regulations (40 cfr 261). Disposal of this material or its
container required compliance with applic able labeling, packaging
& recordkeeping stds. *
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: aliphatic hydrocarbon
cas: 8052-41-3
rtecs #: wj8925000
fraction by wt: 41%
other rec limits: none recommended
osha pel: 100 ppm
acgih tlv: 100 ppm
ingred name: voc: 417 grams/liter (less water)
rtecs #: 9999999vo
other rec limits: none recommended
Reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: direct contact to eyes may cause
irritation. Prolonged and/or repeated contact may cause skin
irritation. inhalation of high concentrations of vapors may lead
to lung changes, nausea, vomiting, cough , pulmonary irritation,
and central nervous system depression. Ingestion may cause
gastrointestinal disturbances. Aspiration of this product into the
lungs may cause pneumonitis, pulmonary edema and h emorrhage.
effects of overexposure: inhalation health risks and symptons of
exposure breathing of high vapor concentration may cause
drowsiness, dizziness, fatigue, followed by coma. skin and eye
contact health risks and symtoms of ex posure eye: direct contact
and/or contact with vapors may cause irritation skin: prolonged
and/or repeated contact may cause moderate irritation, defatting,
and dermatitis. ingestion health risks a nd symptons of exposure
aspiration of this product into the lungs may cause pneumonitis,
pulmonary, edema and hemorrhage ingestion may cause
gastrointestinal disturbances.
medical cond aggravated by exposure: individuals with pre-existing
diseases in or history of ailments involving skincentral nervous
system, liver and kidney.
First aid: eye contact: immediately flush with large amounts of water
for 15 minutes. Seek medical aid. skin: wash throughly with soap
and water. Seek medical aid if irritation persists. ingestion:
immediatel y seek medical aid. Do not induce vomiting. Do not
attempt to give anything by mouth to an unconscious person.
Boiling pt: =126.7c, 260.F
b.P. Text: 260to 334 deg f
vapor density: >air
spec gravity: 1.2
voc pounds/gallon: 381
voc grams/liter: 3.18
evaporation rate & reference: slower than ether
solubility in water: essentially nil.
appearance and odor: viscous liquid with typical paint odor.
Stability indicator/materials to avoid: yes
strong oxidizing agents.
stability condition to avoid: flames, sparks, smoking and heat.
hazardous decomposition products: carbon monoxide and carbon dioxide
conditions to avoid polymerization: will not occur.
Waste disposal methods: use inert absorbent materials on spills. Dispose
of in accordance with all federal, state and local regulations
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: light aliphatic solvent naphtha (petroleum)
cas: 64742-89-8
= wt: 11.
ingred name: solvent naphtha, stoddard
cas: 8052-41-3
rtecs #: wj8925000
= wt: 6.
osha pel: 2900 mg/m3;500 ppm
acgih tlv: 525 mg/m3;100 ppm
ingred name: xylene
cas: 1330-20-7
rtecs #: ze2100000
= wt: 2.
acgih tlv: 434 mg/m3;100 ppm
acgih stel: 651 mg/m3;150 ppm
epa rpt qty: 1000 lbs
dot rpt qty: 1000 lbs
Routes of entry: inhalation: yes skin: yes ingestion: yes
effects of overexposure: skin: this material may cause irritatin,
remitization or defatting of skin upon prolonged or repeated
contact. Inhalation: excessive exposure to vapaors or spray can
resul in headache, dizziness, naus ea and loss of consciousness.
some reports have associated repeated & prolonged occupationa;
overexposure to solvents with permanent brain & nervous system
damage. Eyes: this material may be an eye ir ritant.
medical cond aggravated by exposure: none, when used in accordance with
safe handling instructions (see section viii)
First aid: skin: promptly was with soap and water, remove and wash any
containimated clothing before reuse eyes: flush with large
quantities of water for 15 minutes and seek medical attention
swallowing: if i njested do not induce vomiting: keep person warm
and quiet and get medical attention. Aspiration of material into
lungs can cause chemical pneunitis which can be fatal. inhalation:
remove victim to f resh air immediately. If respiratory symptons
develop, seek medical attention at once.
Boiling pt:
b.P. Text: 307-389f
vapor pres: 2.6mmhg@20c
vapor density: >air
voc grams/liter: 9.5
evaporation rate & reference: slower than ether
solubility in water: nil
appearance and odor: oily liquid, color of tint.
percent volatiles by volume: 59%
Stability indicator/materials to avoid: yes
avoid contact with strong oxidants. Acids, bases and epoxy hardners
under uncontrolled conditions
stability condition to avoid: heat, sparks & open flame. If product
contains aluminum. Moisture in closed cointainers will generate
hydrogen gas.
hazardous decomposition products: incomplete combustion can yield carbon
monoxide and toxic vapors.
Waste disposal methods: if discarded, this material and containers
should be treated as hazardous waste based on the characteristics
of ignitabilty as defined under federal rcra regulations (40 cfr
261). Disposal of this mat erial or its containers requires
compliance with applicable, packged and recordkeeping standards.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: mineral spirits
cas: 8052-41-3
code: f
rtecs #: wj8925000
= wt: 41.
osha pel: 2900 mg/m3;500 ppm
acgih tlv: 525 mg/m3;100 ppm
Routes of entry: inhalation: yes skin: yes ingestion: yes
reports of carcinogenicity: ntp: no iarc: no osha: no
explanation of carcinogenicity: this product contains no known
carcinogens in reportable quantities as defined by acgih, osha,
ntp, iarc.
effects of overexposure: skin: this material may cause
irritation.Sensitization, or defatting of skin upon prolonged or
repeaetd contact. Inhalation: excessive exposure to vapors or spray
mist can result in headache, dizzines s, nausea and loss of
consciousness.Some reports have associated repeaetd & prolonged
occupational overexposure to solvents with premaennt brain &
nervous system damage. Eyes: this material may be an eye irritant.
First aid: skin: wash with soap and water.Remove and wash any
contaminated clothing before reuse. Eyes: flush with large
quantities of water for 15 minutes and seek medical
attention.Swallowing: if ingested do not induce vomiting; keep
person warm and quiet and get medical attention. Inhalation: remove
victim to fresh air immediately. If respiratory symptoms develop,
seek medical attention at once.
Boiling pt: b.P. Text: 307-389 f
vapor pres: 2.6
vapor density: heavier
voc pounds/gallon: 437
voc grams/liter: 9.5
evaporation rate & reference: slower than ether
solubility in water: nil
appearance and odor: white oily liquid, mild odor
percent volatiles by volume: 55%
Stability indicator/materials to avoid: yes
avoid contact with strong oxidants, acids, bases and epoxy hardeners
under uncontrolled conditions.
stability condition to avoid: heat, sparks and open flame.
hazardous decomposition products: combustion can yield carbon monoxide
and toxic vapors.
conditions to avoid polymerization: will not occur.
Waste disposal methods: disposal of this material or its containers
requires compliance with applicable labeling, packaging and
recordkeeping standards.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: mineral spirits
cas: 8052-41-3
code: f
rtecs #: wj8925000
= wt: 39.
osha pel: 2900 mg/m3;500 ppm
acgih tlv: 525 mg/m3;100 ppm