NationalStockNumber.INFO
Worldwide distributor of NSN parts and consumables located in the USA.
Worldwide distributor of NSN parts and consumables located in the USA.
A coating material in which the basic film-forming component is polyurethane, oil modified polyurethane, or resin modified polyurethane. It may be pigmented.
Send us a request for quote using the form below. Our team will contact you with an up to date pricing and availability quote ASAP.
Polyurethanes, except elastomeric
Polyurethanes, in primary forms
Plastic materials
Y - Indicates information is in the hazardous materials information resource system (hmirs).
PMICA - Item does not contain precious metal.
ENACJE - Metal parts coatings
CRITL- The item does not have a critical feature such as tolerance, fit restrictions or application. nuclear hardness properties have not been determined (not valid for input).
Questions & Answers: |
|
| What are the historical prices recorded for this stock number? | |
| Historical data shows pricing from $410.99 to $684.99.. | |
| Does NSN 8010-01-306-9680 have a shelf life? | |
| No. There is no shelf life applicable for this NSN. | |
| What NATO entities are users of this NSN? | |
| No recorded entities for this stock number. | |
| What is the NIIN of NSN 8010-01-306-9680? | |
| 013069680 or 01-306-9680 | |
| Does NSN 8010-01-306-9680 require demilitarization? | |
| Yes - ITAR Controlled | |
| What is the most recent solicitation for NSN 8010-01-306-9680? | |
| No solicitations for this NSN. | |
| When was this national stock number assigned to the federal catalog? | |
| Sep 03, 1989 | |
Routes of entry: inhalation: yes skin: yes ingestion: yes
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: eyes: severe irritation, lacrimation.
skin: irritation, defatting & dermatitis. Inhalation: nasal &
respiratory irritation, cns depression. Ingestion: gastrointestinal
irritation. Histologic fibrosis of lungs, narcosis, coma. Target
organs: eyes, skin, respiratory system, cns, pns.
explanation of carcinogenicity: not listed by ntp, iarc, or osha.
effects of overexposure: eyes: redness, blurred vision. Skin: redness.
inhalation: cns: dizziness, drowsiness, weakness, fatigue,
confusion. Nausea, headache, vertigo, possible unconsciousness,
asphyxiation. Ingestion: abdomi nal pain, nausea, vomiting,
diarrhea.
medical cond aggravated by exposure: none known.
First aid: inhalation: move to fresh air immed. If breath stopped, give
artif resp. Get med aid asap. Skin: immed flush w/water. If cloth
contam, remove & flush skin w/water. Get med aid. Wash
cloth/decontam sho es before reuse. Eye: immed flush w/water 15
min, occas lift eyelids. Get med aid immed. Ingest: drink 1-2
glasses water. Don't induce vomit. See dr/poison cntrl ctr immed.
treat symptomatically.
Boiling pt: b.P. Text: 213 to 302f
vapor density: > air
spec gravity: 12.14 lbs/gal
viscosity: 70-85 ku
evaporation rate & reference: slower than ether.
solubility in water: slight.
appearance and odor: liquid, odor of solvent.
percent volatiles by volume: 53.44
Stability indicator/materials to avoid: yes
strong oxidizers, alkalies, acids.
stability condition to avoid: high temperatures, shock from dropping.
hazardous decomposition products: can produce carbon monoxide and/or
carbon dioxide.
Waste disposal methods: dispose of in accordance with applicable local,
state and federal regulations. D001. Ignitable.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: methyl amyl ketone (vapor pressure 2.0 mm @ 20 c)
cas: 110-43-0
rtecs #: mj5075000
fraction by wt: 15%
other rec limits: none specified
osha pel: 100 ppm
acgih tlv: 50 ppm/100 ppm stel
ingred name: polyester resin
fraction by wt: 14%
other rec limits: none specified
ingred name: pm acetate (vapor pressure 3.7 mm @ 20 c)
cas: 108-65-6
rtecs #: ai8925000
fraction by wt: 6%
other rec limits: none specified
ingred name: methyl propyl ketone (vapor pressure 27.8 mm @ 20 c)
cas: 107-87-9
rtecs #: sa7875000
fraction by wt: 6%
other rec limits: none specified
osha pel: 200 ppm
acgih tlv: 200 ppm/250 ppm stel
ingred name: green pigment (as cr)
cas: 1308-38-9
rtecs #: gb6475000
fraction by wt: 1%
other rec limits: none specified
osha pel: 1.0 mg/m3
acgih tlv: 0.05 mg/m3
ingred name: proprietary ingredients (mfr states unidentified ingreds
are not considered hazardous under federal hazard comm regs)
fraction by wt: balance
other rec limits: none specified
ingred name: voc: 3.72 lbs/gal.
rtecs #: 9999999vo
other rec limits: none specified
Ld50 lc50 mixture: oral ld50: 4,300 mg/kg (rats). *
routes of entry: inhalation: yes skin: yes ingestion: yes
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: inhal: mucous membrane/resp tract
irrit. Bronchitis/bron spasm, pulmonary edema. Chem/hypersensitive
pneumonitis. Nose/throat/eye irrit. Immed dangerous to life/hlth.
isocyanate sensitization (chem as thma). Non-specific asthmatic
response.Lung damage/reduced function. Perm brain/nerv sys damage.
neurotoxic effects.**
explanation of carcinogenicity: not listed by ntp, iarc or osha.
*inhal lc50: 137 to 1150 mg/m3 (rat). More info on file.
effects of overexposure: inhal: runny nose, sore throat, cough, chest
discomfort, short breath, breath obstruct. Flu-like symptom. Dry
throat, tight chest. Headache, nausea, narcosis, fatigue, appetite
loss, wheeze, asthmatic attack. Intellect/coordinatn loss. Skin:
red, swell, rash, scaling, blister. Dry, crack skin. Infection
susceptible.***
medical cond aggravated by exposure: asthma and other respiratory
First aid: inhal: move to fresh air. Admin oxygen/artif resp as needed.
get med aid. Asthmatic symptom may develop, treat symptoms. See dr.
skin: remove contam cloth immed. Wash w/soap & wtr. Wash contam
cloth b efore reuse. Severe expos, get under sfty shower after
removing cloth. Get med aid. Lesser expos, get med aid if irrit
develops. Eye: flush w/lukewarm water (low pressure) 15 min,
lifting eyelids.****
Vapor density: > air
spec gravity: 8.85 lbs/gal
viscosity: 183 mpas @20c
evaporation rate & reference: slower than ether
solubility in water: insolubl/react w/wtr
appearance and odor: clear to pale yellow liquid/solvent odor.
percent volatiles by volume: ca 30
Stability indicator/materials to avoid: yes
water, amines, strong bases, alcohols, metal compounds and surface
active materials.
stability condition to avoid: moisture, high temperatures, shock from
dropping.
hazardous decomposition products: by high heat & fire: carbon dioxide,
carbon monoxide, oxides of nitrogen, traces of hcn & hdi.
conditions to avoid polymerization: may occur if in contact with
moisture or other materials which react w/isocyanates. May occur at
temps above 400f.
Waste disposal methods: waste must be disposed of in accordance w/fed,
state & local regs. Incineration preferred. Empty cntnr must be
handle w/care. Decontam cntnrs prior to disposal. Don't heat/cut
on/near empty cntnrs w/e lectrical or gas torch. Rcra
ignitable;d001.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: homopolymer of hdi (vapor pressure 7.5e-5 mm @ 20 c)
cas: 28182-81-2
rtecs #: nq9170000
fraction by wt: 75%
other rec limits: none specified
ingred name: hexamethylene diisocyanate
cas: 822-06-0
rtecs #: mo1740000
fraction by wt: #
other rec limits: none specified
acgih tlv: 0.005 ppm
epa rpt qty: 1 lb
dot rpt qty: 1 lb
ingred name: # residual monomer content less than 0.5% based on resin
solids at time of mfr. After 3-6 mo storage, free monomer ##
rtecs #: 9999999zz
other rec limits: none specified
ingred name: ## content may rise to maximum of 1.6%. Manufacturer also
recommends a ceiling level of 0.02 ppm.
rtecs #: 9999999zz
other rec limits: none specified
ingred name: xylene (vapor pressure 7.0 mm @ 20 c)
cas: 1330-20-7
rtecs #: ze2100000
fraction by wt: 12.5%
other rec limits: none specified
osha pel: 100 ppm
acgih tlv: 100 ppm/150 ppm stel
epa rpt qty: 1000 lbs
dot rpt qty: 1000 lbs
ingred name: n-butyl acetate (sara iii) (vapor pressure 10 mm @ 20 c)
cas: 123-86-4
rtecs #: af7350000
fraction by wt: 12.5%
other rec limits: none specified
osha pel: 150 ppm
acgih tlv: 150 ppm/200 ppm stel
epa rpt qty: 5000 lbs
dot rpt qty: 5000 lbs
ingred name: voc: 2.21 lbs/gl
rtecs #: 9999999vo
other rec limits: none specified