NationalStockNumber.INFO
Worldwide distributor of NSN parts and consumables located in the USA.
Worldwide distributor of NSN parts and consumables located in the USA.
A finish coat material composed of a base compound and an accelerator. The base material consists of an epoxy resin which is a reaction product of epichlorohydrin. The activator is normally a polyamide, polyamine, or similar compound. Usually, for colored epoxy finishes, only the base material contains pigment or dye, but both base and activator may be colored. The material may also be furnished with pigment separate from both base compound and accelerator.
| Solicitation | Return by Date | Buyer Code | Quantity |
|---|---|---|---|
| SPE8ES20T3068 | 2020-03-04 | PEPCE | 24 KT |
| SPE8ES20T2703 | 2020-02-24 | PEPCE | 8 KT |
| SPE8ES20T0862 | 2019-11-20 | PEPCE | 14 KT |
| SPE8ES19T6973 | 2019-07-30 | PEPCE | 8 KT |
| SPE8ES19T2321 | 2019-01-14 | PEPCE | 10 KT |
| SPE8ES19T2111 | 2019-01-02 | PEPCE | 8 KT |
| SPE8ES18T8670 | 2018-08-13 | PEPCE | 39 KT |
| SPE8ES18T6914 | 2018-06-18 | PEPCE | 2 KT |
| SPE8ES18T6561 | 2018-06-05 | PEPCE | 1 KT |
| SPE8ES18T4788 | 2018-04-10 | PEPCE | 12 KT |
Send us a request for quote using the form below. Our team will contact you with an up to date pricing and availability quote ASAP.
Epoxide resins
Epoxide resins, in primary forms
Plastic materials
Y - Indicates information is in the hazardous materials information resource system (hmirs).
PMICA - Item does not contain precious metal.
ENACJD - Aerospace operations coatings
CRITL- The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
004630 - Adhesives or epoxy resins
621 - Paint
9 - Other or no special handling required (sh)
A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
C - Chemical corps items and all other chemicals not covered in other classificatons. note: when an item has a chemical proper shipp
R - Flammable liquids, un class 3 (flammable liquids label)
W - Rating variable
Questions & Answers: |
|
| What are the historical prices recorded for this stock number? | |
| Historical data shows pricing from $198.21 to $330.35.. | |
| Does NSN 8010-01-419-1154 have a shelf life? | |
| No. There is no shelf life applicable for this NSN. | |
| What NATO entities are users of this NSN? | |
| Department Of The Army, Department Of The Air Force, U.s. Marine Corps, Department Of The Navy, General Services Administration, Spain, and United Kingdom | |
| What is the NIIN of NSN 8010-01-419-1154? | |
| 014191154 or 01-419-1154 | |
| Does NSN 8010-01-419-1154 require demilitarization? | |
| Yes - ITAR Controlled | |
| What is the most recent solicitation for NSN 8010-01-419-1154? | |
| Solicitation SPE8ES20T3068 for qty 24 on 02/28/2020 | |
| When was this national stock number assigned to the federal catalog? | |
| Sep 13, 1995 | |
Routes of entry: inhalation: yes skin: yes ingestion: yes
reports of carcinogenicity: ntp: no iarc: yes osha: no
health hazards acute and chronic: repeated/prolonged occupational
overexposure to solvents associated w/permanent brain/nervous
system damage. Intentional misuse by deliberately concentrating and
inhaling the contents may be harmful o r fatal. Prolonged
overexposure (inhal)may cause delayed lung disease.
explanation of carcinogenicity: from initial limited tests/studies iarc
concludes is limited evidance of carcinogenicity from crystaline
silica.
effects of overexposure: overexposure may produce various effects. Acute
toxicity (headache, dizziness, nausea, loss consciousness. Severe
eye irritation possibly resulting permanent damage. Irritated
mucous membranes. Vomiti ng from ingestion. Skin defatting/drying.
sensitization after repeated contact.
First aid: eye: flush w/plenty clean h20 15 min, lifting lids, get med
attn. Inhal: get fresh air, provide oxygen if breath difficult.
give artif resp if not breathing. Get med attn. Keep victim
warm/quiet. Neve r give uncons person liq. Ingest: call dr. Immed.
don't induce vomit. If vomit spontaneously, keep head below hips.
skin: flush w/h20 while removing contam clothes/shoes. If irrit
persist, get med aid
Boiling pt: b.P. Text: 175 to 344f
vapor density: >air
spec gravity: 1.15
ph: na
viscosity: >200 centisto
evaporation rate & reference: 3.46 x n-butyl acetate
solubility in water: slight
appearance and odor: black liquid, solvent odor
percent volatiles by volume: 36.5
Stability indicator/materials to avoid: yes
oxidizing agents & strong alkalies. Not corrosive to metal.
stability condition to avoid: heat, sparks, open flames, strong
alkalies, & oxidizing agents.
hazardous decomposition products: incomplete combustion or products like
this may generate highly poisonous carbon monoxide and other toxic
gases
Waste disposal methods: disposal must be in accordance with current
local, state & federal reg. Contact an approved disposal facility
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: methyl ethyl ketone (2-butanone) (mek) (sara iii) (vp =
71.2 mmhg)
cas: 78-93-3
rtecs #: el6475000
fraction by wt: 14.0%
osha pel: 200 ppm/300 stel
acgih tlv: 200 ppm/300stel 9192
epa rpt qty: 5000 lbs
dot rpt qty: 5000 lbs
ingred name: toluene (sara iii)
cas: 108-88-3
rtecs #: xs5250000
fraction by wt: 10.0%
osha pel: 100 ppm
acgih tlv: 100 ppm
epa rpt qty: 1000 lbs
dot rpt qty: 1000 lbs
ingred name: epoxy resin
cas: 25085-99-8
fraction by wt: 24.0%
other rec limits: none recommended
ingred name: naphtha, light aromatic (vp = 9.0 mmhg)
cas: 64742-95-6
fraction by wt: 1.6%
other rec limits: none recommended
osha pel: 50 ppm
acgih tlv: 50 ppm 9091
ingred name: silica, crystalline - quartz (may be released by sanding
dried paint film)
cas: 14808-60-7
rtecs #: vv7330000
fraction by wt: 16.0%
other rec limits: none recommended
osha pel: not est.
acgih tlv: 0.1 mg/m3 rdust;9495
ingred name: carbon black
cas: 1333-86-4
rtecs #: ff5800000
fraction by wt: 3.1%
other rec limits: none recommended
osha pel: not est.
acgih tlv: not est.
Routes of entry: inhalation: yes skin: yes ingestion: yes
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: repeated/prolonged occupational
overexposure to solvents associated w/permanent brain/nervous
system damage. Intentional misuse by deliberately concentrating and
inhaling the contents may be harmful o r fatal. Prolonged
overexposure (inhal)may cause delayed lung disease.
explanation of carcinogenicity: may contain trace amts of some chem
known to the state of cato be carcinogens or reprodctive toxins.
effects of overexposure: overexposure may produce various effects. Acute
toxicity (headache, dizziness, nausea, loss consciousness. Severe
eye irritation possibly resulting permanent damage. Irritated
mucous membranes. Vomiti ng from ingestion. Skin defatting/drying.
sensitization after repeated contact.
First aid: eye: flush w/plenty clean h20 15 min, lifting lids, get med
attn. Inhal: get fresh air, provide oxygen if breath difficult.
give artif resp if not breathing. Get med attn. Keep victim
warm/quiet. Neve r give uncons person liq. Ingest: call dr. Immed.
don't induce vomit. If vomit spontaneously, keep head below hips.
skin: flush w/h20 while removing contam clothes/shoes. If irrit
persist, get med aid
Boiling pt: b.P. Text: 175 to 545f
vapor density: >air
spec gravity: 0.89
viscosity: 20 cps
evaporation rate & reference: 4.82 x n-butyl acetate
solubility in water: slight
appearance and odor: clear liquid
percent volatiles by volume: 44.4
Stability indicator/materials to avoid: yes
oxidizing agents & strong alkalies. Not corrosive to metal.
stability condition to avoid: heat, sparks, open flames, strong
alkalies, & oxidizing agents.
hazardous decomposition products: incomplete combustion or products like
this may generate highly poisonous carbon monoxide and other toxic
gases
Waste disposal methods: disposal must be in accordance with current
local, state & federal reg. Contact an approved disposal facility
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: methyl ethyl ketone (2-butanone) (mek) (sara iii) (vp =
71.2 mmhg)
cas: 78-93-3
rtecs #: el6475000
fraction by wt: 40.0%
osha pel: 200 ppm/300 stel
acgih tlv: 200 ppm/300stel 9192
epa rpt qty: 5000 lbs
dot rpt qty: 5000 lbs
ingred name: nonyl phenol (vp = 0.9 mmhg)
cas: 84832-15-3
fraction by wt: 40.0%
other rec limits: none recommended
ingred name: mxda (metaxylene diamine)
cas: 1477-55-0
rtecs #: pf8970000
fraction by wt: 20.0%
other rec limits: none recommended
acgih tlv: 0.1 mg/m3
Reports of carcinogenicity: ntp: unknown iarc: unknown osha: yes
health hazards acute and chronic: as a precaution: exposure to liquids,
vapors, mists or fumes should be minimized. Medical conditions that
could be aggravated by exposure include respiratory disorders and
skin allergies.Potential for nervous system, kidney or liver
damage.
effects of overexposure: inhalation: may cause difficulty of breathing,
dizziness and headaches.If overcome by vapor,move to victim to
fresh air. Skin contact: mat irritate and cause dermatitis. Wash
skin thoroughly with soap and water and remove any contaminated
clothing. Ingestion: obtain immediate medical attention. Eye
contact: irritating and may injure eye tissue ifnot removed
promptly. flush with large amounts of wa ter for at least 15
minutes.
medical cond aggravated by exposure: dizziness, headaches, respiratory
disorders and dermatitis.
First aid: inhalation: move person to fresh air.If breathing stops,
apply artificial respiration and seek medical attention.Eye
contact: flush with large quantities of water for 15 minutes. Skin
contact: wash tho roughly with soap and water and see a physician.
Boiling pt: =138.9c, 282.F
vapor density: heavier
spec gravity: (h20=1): 1.6
voc pounds/gallon: 331
voc grams/liter: 2.76
evaporation rate & reference: slower than ether
solubility in water: non soluble
appearance and odor: free-flowing liquid
Stability indicator/materials to avoid: yes
avoid contact with strong oxidants.
stability condition to avoid: reaction with epoxy resin curing agents
may produce considerable heat.
hazardous decomposition products: including carbon monoxide, carbon
dioxide.
conditions to avoid polymerization: will not occur.
Waste disposal methods: observe precautions for volatile flammable
vapors from absorbed material. Assure comfornity with applicable
government regulations. Consult an expert on disposal of recovered
material and ensure confo rnity to disposal regulations.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: xylene
cas: 1330-20-7
rtecs #: ze2100000
= wt: 21.
acgih tlv: 434 mg/m3;100 ppm
acgih stel: 651 mg/m3;150 ppm
epa rpt qty: 1000 lbs
dot rpt qty: 1000 lbs
Ld50 lc50 mixture: none
routes of entry: inhalation: yes skin: yes ingestion: yes
reports of carcinogenicity: ntp: unknown iarc: unknown osha: yes
health hazards acute and chronic: as a precaution: exposure to liquids,
vapors, mists or fumes should be minimized, medical conditions that
could be aggravated by exposure include respiratory disorders and
skin allergies. Potential fo r nervous system, kidney or liver
damage.
explanation of carcinogenicity: none.
effects of overexposure: inhalation: may cause difficulty of breathing,
dizziness and headaches. eye contact: irritating and may injure
eye tissue if not removed promptly. Skin contact: may irritate and
cause dermatitis. In gestion: obtain immediate medical attention.
medical cond aggravated by exposure: dizziness, headaches, respiratory
disorders and dermatitis.
First aid: inhalation overexposure: move person to fresh air. If
breathing stops, apply artificial respiration and seek medical
attention. Eye contact: flush with large quantities of water for 15
minutes. Skin c ontact: wash thoroughly with soap and water and
seen a physician.
Boiling pt: b.P. Text: 175 to 282 deg f
melt/freeze pt: m.P/f.P text: none
decomp temp: decomp text: none
spec gravity: 1.0
voc pounds/gallon: 254
appearance and odor: free-flowing liquid
Stability indicator/materials to avoid: yes
avoid contact with strong oxidants.
stability condition to avoid: reaction with epoxy resin curing agents
may produce considerable heat.
hazardous decomposition products: including carbon monoxide, carbon
dioxide.
conditions to avoid polymerization: will not occur.
Waste disposal methods: observe precautions for volatile flammable
vapors from absorbed material. Assure conformity with applicable
government regulations. Consult an expert on disposal of recovered
material and ensure confo rmity to disposal regulations.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: bisphenol a-epichlorohydrin epoxy resin
cas: 25068-38-6
rtecs #: ce6880000
ingred name: methyl ethyl ketone
cas: 78-93-3
rtecs #: el6475000
= wt: 11.
osha pel: 590 mg/m3;200 ppm
acgih tlv: 590 mg/m3;200 ppm
acgih stel: 885 mg/m3;300 ppm
epa rpt qty: 5000 lbs
dot rpt qty: 5000 lbs
ingred name: 4-methyl-2-pentanone
cas: 108-10-1
rtecs #: sa9275000
= wt: 10.
osha pel: 410 mg/m3;100 ppm
acgih tlv: 205 mg/m3;50 ppm
acgih stel: 307 mg/m3;75 ppm
epa rpt qty: 5000 lbs
dot rpt qty: 5000 lbs
ingred name: xylene
cas: 1330-20-7
rtecs #: ze2100000
= wt: 3.
acgih tlv: 434 mg/m3;100 ppm
acgih stel: 651 mg/m3;150 ppm
epa rpt qty: 1000 lbs
dot rpt qty: 1000 lbs
Ld50 lc50 mixture: none
routes of entry: inhalation: yes skin: yes ingestion: yes
reports of carcinogenicity: ntp: unknown iarc: unknown osha: yes
health hazards acute and chronic: as a precaution: exposure to liquids,
vapors, mists or fumes should be minimized. Medical conditions that
could be aggravated by exposure include respiratory disorders and
skin allergies. Potential fo r nervous system, kidney or liver
damage.
explanation of carcinogenicity: none.
effects of overexposure: inhalation: may cause difficult or breathing,
dizziness and headaches. Eye contact: irritating and may injure
eye tissue if not removed promptly. Skin contact: may irritate and
cause dermatitis. Inge stion: obtain immediate medical attention.
medical cond aggravated by exposure: dizziness, headaches, respiratory
disorders and dermatitis.
First aid: inhalation overexposure: move person to fresh air. If
breathing stops, apply artificial respiration and seek medical
attention.Eye contact: flush with large quantities of water for 15
minutes. Skin co ntact: wash thoroughly with soap and water and see
a physician.
Boiling pt: b.P. Text: 282 deg f
melt/freeze pt: m.P/f.P text: none
decomp temp: decomp text: none
vapor density: heavier
spec gravity: (h20=1): 1.6
voc pounds/gallon: 331
voc grams/liter: 2.76
evaporation rate & reference: slower than ether
appearance and odor: free-flowing liquid.
Stability indicator/materials to avoid: yes
avoid contact with strong oxidants.
stability condition to avoid: reaction with epoxy curing agents may
produce considerable heat.
hazardous decomposition products: including carbon monoxide, carbon
dioxide.
conditions to avoid polymerization: will not occur.
Waste disposal methods: observe precautions for volatile flammable
vapors from absorbed material. Assure conformity with applicable
government regulations. Consult an expert on disposal of recovered
material and ensure conf ormity to disposal regulations.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: xylene
cas: 1330-20-7
rtecs #: ze2100000
= wt: 21.
acgih tlv: 434 mg/m3;100 ppm
acgih stel: 651 mg/m3;150 ppm
epa rpt qty: 1000 lbs
dot rpt qty: 1000 lbs