Worldwide distributor of NSN parts and consumables located in the USA.
A doughlike compound of whiting and linseed oil. It may contain small amounts of white lead, red lead, lampblack and/or litharge. See also glazing compound, sash; caulking compound.
Send us a request for quote using the form below. Our team will contact you with an up to date pricing and availability quote ASAP.
Glazers' putty, grafting putty, resin cements, caulking compounds, etc, nesoi
Glaziers' putty; grafting putty; resin cement, caulking compounds and other mastics; painters' fillings; nonrefractory surfacing preparations
Shingles, molding, wallboard
Y - Indicates information is in the hazardous materials information resource system (hmirs).
PMICA - Item does not contain precious metal.
CRITL- The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
150110 - Putty
620 - Paint, in individual containers less than 10 cubic ft
9 - Other or no special handling required (sh)
A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
B - Construction materials: includes paint and related materials, prefabricated building, wood products, metal and composition mater
T - 55.0
Z - No special type of cargo code applicable
Questions & Answers: |
|
What are the historical prices recorded for this stock number? | |
No pre-dated pricing for this NSN could be found. | |
Does NSN 8030-00-116-1284 have a shelf life? | |
No. There is no shelf life applicable for this NSN. | |
What NATO entities are users of this NSN? | |
No recorded entities for this stock number. | |
What is the NIIN of NSN 8030-00-116-1284? | |
001161284 or 00-116-1284 | |
Does NSN 8030-00-116-1284 require demilitarization? | |
Yes - ITAR Controlled | |
What is the most recent solicitation for NSN 8030-00-116-1284? | |
No solicitations for this NSN. | |
When was this national stock number assigned to the federal catalog? | |
Dec 15, 1972 |
Effects of overexposure: when unmixed, is a moderate sensitizer &
irritant. Inert when cured.
First aid: if in eyes immediately flush eyes w/water & get medical attn.
if on skin, remove w/soap & water. If rash develops, get medical
attn. If ingested, induce vomiting & get medical attention.
Hcc: n1
spec gravity: 1.68
solubility in water: slight
appearance and odor: base-whte slight epoxy odor,cataly-mint grn slight
percent volatiles by volume: 0
Stability indicator/materials to avoid: yes
conditions to avoid polymerization: mixing lg masses of base &
hardnr,generat high exothermc hea
Waste disposal methods: when unmixed, bury in approved land fill. When
mixed & cured, dispose in regular trash.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: catalyst (type not specified)
fraction by wt: 40%
ingred name: vehicle
fraction by wt: 40%
Routes of entry: inhalation: yes skin: yes ingestion: yes
reports of carcinogenicity: ntp: yes iarc: yes osha: no
health hazards acute and chronic: ingestion-single dose oral toxicity is
low. Large amounts may result in injury. Chronic: epichlorohydrin
has been reported to produce cancer in lab animals and
epidemiological studies present "weak" e vidence of cancer risks to
humans.
explanation of carcinogenicity: epicchlorohydrin is listed in the iarc
monographs and by ntp.
effects of overexposure: inhalation-heating can generate vapors that
could cause headache, nausea, dizziness & respiratory irritation if
inhaled. Skin-may cause moderate skin injury (reddening and
swelling). Repeated exposure may cause skin burns.
medical cond aggravated by exposure: sensitizer-may cause allergic skin
reaction which can be severe in some individuals.
First aid: eye-flush with plenty of water for at least 15 min & seek
medical attention. Skin-remove contaminated clothing & wash area
with soap & water for 15 min. Ingestion-if appreciable quantities
are swallow ed, induce vomiting & seek medical attention.
inhalation-remove person to fresh air. If breathing has stopped,
administer artificial respiration & seek medical attention.
Hcc: n1
viscosity: gel form
solubility in water: negligible
appearance and odor: thick white paste, mild odor
Stability indicator/materials to avoid: yes
contamination with strong acids, bases, amines, and mercaptans can
cause polymerization.
stability condition to avoid: excessive heat.
hazardous decomposition products: fumes produced when heated may
include: carbon monoxide, phenolics, hydrogen chloride and water.
Waste disposal methods: send to a licensed recycler, reclaimer or
incinerator for evaluation and disposal. Always be in accordance
with federal, state and local regulations.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: bisphenol a epoxy resin
cas: 25036-25-3
fraction by wt: 35-40%
other rec limits: none recommended
ingred name: aliphatic monoglycidyl ether of c-8 & c-10 alcohols
cas: 68609-96-1
fraction by wt: 1-5%
other rec limits: none recommended
Routes of entry: inhalation: yes skin: yes ingestion: yes
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: eyes/skin: severe irritation.
inhalation: vapors may be irritating. Ingestion: may cause damage to
mucus membranes. Chronic: asthma, skin sensitization or other
allergic reactions.
explanation of carcinogenicity: there are no ingredients above 0.1%
which are identified as carcinogens by ntp,iarc or osha.
effects of overexposure: inhalation: irritation, coughing, nausea,
vomiting. Ingestion: abdominal pain, vomiting. Skin: irritation,
rashes.
medical cond aggravated by exposure: asthma, chronic respiratory
diseases, skin/eye disorders, and allergies.
First aid: inhalation: remove to fresh air, provide cpr/oxygen if needed.
eye contact: flush with water for 15 minutes. Get medical help. Skin
contact: wash with soap and water. Remove contaminated clothing. Get
me d attention if symptoms persist. Ingestion: do not induce
vomiting, drink 1-2 glasses of water or milk. Get medical help
immediately.
Hcc: n1
viscosity: gel form
solubility in water: slight
appearance and odor: green paste.
Stability indicator/materials to avoid: yes
mineral acids, oxidizing agents, epoxy resins under uncontrolled
conditions.
stability condition to avoid: elevated temperatures for prolonged
periods.
hazardous decomposition products: carbon dioxide, carbon monoxide,
nitrogen oxides.
Waste disposal methods: dispose of in accordance with federal, state and
local regulations. Do not discharge into waterways.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: tetraethylenepentamine
cas: 112-57-2
rtecs #: kh8585000
fraction by wt:
other rec limits: none recommended
ingred name: triethylene tetramine
cas: 112-24-3
rtecs #: ye6650000
fraction by wt:
other rec limits: none recommended
ingred name: 2,4,6-tris(dimethylamino methyl) phenol
cas: 90-72-2
rtecs #: sn3500000
fraction by wt:
other rec limits: none recommended