NationalStockNumber.INFO
Worldwide distributor of NSN parts and consumables located in the USA.
Worldwide distributor of NSN parts and consumables located in the USA.
A chemical composition formulated for coating or for filling voids, cracks, joints or seams of objects and/or materials to exclude foreign matter and/or prevent the transmission of fluids therethrough. It is not designed to act as a primer coating or to be sanded or ground after application. It cannot be wiped off. For items which are specifically compounded to provide electrical insulating characteristics, use insulating compound, electrical. Excludes caulking compound; gasket cement; corrosion preventive compound; cement, iron and steel; plumbing fixture setting compound; preservative coating, rubber and textile treating compounds.
| Solicitation | Return by Date | Buyer Code | Quantity |
|---|---|---|---|
| SPE8ES21T5153 | 2021-08-06 | PEPCE | 6 KT |
| SPE8ES20T0141 | 2019-10-15 | PEPCE | 20 KT |
| SPE8ES18T6763 | 2018-06-11 | PEPCE | 35 KT |
| SPE8ES18T5261 | 2018-04-30 | PEPCE | 8 KT |
| SPE8ES18T2848 | 2018-02-06 | PEPCE | 7 KT |
| SPE8ES18T2153 | 2018-01-08 | PEPCE | 20 KT |
| SPE8ES18T1229 | 2017-11-20 | PEPCE | 8 KT |
| SPE8ES17T6309 | 2017-08-29 | PEPCE | 8 KT |
| SPE8ES17T5877 | 2017-08-14 | PEPCE | 4 KT |
| SPE8ES17T3428 | 2017-04-24 | PEPCE | 7 KT |
Send us a request for quote using the form below. Our team will contact you with an up to date pricing and availability quote ASAP.
Caulking compounds
Glaziers' putty; grafting putty; resin cement, caulking compounds and other mastics; painters' fillings; nonrefractory surfacing preparations
Shingles, molding, wallboard
Y - Indicates information is in the hazardous materials information resource system (hmirs).
PMICA - Item does not contain precious metal.
ENACGQ - Household consumer products
CRITL- The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
149610 - Caulking/glaziers compounds noi
620 - Paint, in individual containers less than 10 cubic ft
9 - Other or no special handling required (sh)
A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
B - Construction materials: includes paint and related materials, prefabricated building, wood products, metal and composition mater
T - 55.0
W - Corrosive materials, un class 8 (corrosive label)
Questions & Answers: |
|
| What are the historical prices recorded for this stock number? | |
| Historical data shows pricing from $1,018.09 to $1,696.82.. | |
| Does NSN 8030-00-159-5032 have a shelf life? | |
| No. There is no shelf life applicable for this NSN. | |
| What NATO entities are users of this NSN? | |
| Department Of The Navy, General Services Administration, Brazil, and Greece | |
| What is the NIIN of NSN 8030-00-159-5032? | |
| 001595032 or 00-159-5032 | |
| Does NSN 8030-00-159-5032 require demilitarization? | |
| Yes - ITAR Controlled | |
| What is the most recent solicitation for NSN 8030-00-159-5032? | |
| Solicitation SPE8ES21T5153 for qty 6 on 08/04/2021 | |
| When was this national stock number assigned to the federal catalog? | |
| Jul 30, 1971 | |
Effects of overexposure: eye/skin contact: irritation,may cause injury or
burns
First aid: skin: remove by washing first with alcohol and then with soap
and water.Eyes: flush w/water for 15 min,consult dr.
Hcc: n1
spec gravity: 1.32
evaporation rate & reference: >0.01
solubility in water: negligible
appearance and odor: white paste with no odor.
Stability indicator/materials to avoid: yes
strong oxidizing agents
hazardous decomposition products: thermal decomposition may product co
and/or co*2
Waste disposal methods: incinerate in a furnace or dispose of iaw all
federal,state and local regs.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: epoxy resin
fraction by wt: 60%
ingred name: hydrous calcium magnesium silicates
fraction by wt: 40%
Effects of overexposure: eye/skin: irriatation. Inhalation:
headache,dizziness
First aid: eye: flush with water 15 minutes,get medical attn.Skin:
remove contaminated clothing & wash affected area with soap &
water. Inhalation: remove from exposure.
Hcc: v7
spec gravity: 1.59
evaporation rate & reference:
solubility in water: negligible
appearance and odor: off white past-slight aromatic odor.
percent volatiles by volume: 0.5
Stability indicator/materials to avoid: yes
Waste disposal methods: by methods consistent with local,state and
federal regulations.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: calcium carbonate (marble) (limestone)
cas: 1317-65-3
rtecs #: ev9580000
fraction by wt: 47%
osha pel: 15 mg/m3 tdust
acgih tlv: 10 mg/m3 tdust; 9192
ingred name: titanium dioxide
cas: 13463-67-7
rtecs #: xr2275000
fraction by wt: 1.5%
osha pel: 15 mg/m3 tdust
acgih tlv: 10 mg/m3 tdust; 9293
ingred name: toluene (sara iii)
cas: 108-88-3
rtecs #: xs5250000
fraction by wt:
osha pel: 200 ppm/150 stel
acgih tlv: 50 ppm; 9293
epa rpt qty: 1000 lbs
dot rpt qty: 1000 lbs
ingred name: silica, amorphous, dust
cas: 112945-52-5
rtecs #: vv7310000
fraction by wt: 1.7%
osha pel: 6 mg/m3
acgih tlv: 10 mg/m3; 8990
ingred name: liquid epoxy resin
fraction by wt: 50%
Effects of overexposure: eye/sin: irritation. Vapors: headache,dizziness
First aid: eye: flush with water 15 minutes,get medical attn. Skin:
remove contaminated clothing & wash affected area with soap &
water. Inhalation: remove from exposure.
Hcc: n1
spec gravity: 1.18
evaporation rate & reference:
solubility in water: slight
appearance and odor: black paste-slight ammoniacal odor.
percent volatiles by volume: 10
Stability indicator/materials to avoid: yes
Waste disposal methods: by methods consistent with local,state and
federal regulations.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: diethylene triamine
cas: 111-40-0
rtecs #: ie1225000
fraction by wt: 2%
osha pel: 1 ppm
acgih tlv: s, 1 ppm; 9192
ingred name: glycerin
cas: 56-81-5
rtecs #: ma8050000
fraction by wt: 3%
osha pel: 15 mg/m3 tdust
acgih tlv: 10 mg/m3 (mist) 9293
ingred name: toluene (sara iii)
cas: 108-88-3
rtecs #: xs5250000
fraction by wt: 4.5%
osha pel: 200 ppm/150 stel
acgih tlv: 50 ppm; 9293
epa rpt qty: 1000 lbs
dot rpt qty: 1000 lbs
ingred name: isopropyl alcohol (sara iii)
cas: 67-63-0
rtecs #: nt8050000
fraction by wt: 5%
osha pel: 400 ppm/500 stel
acgih tlv: 400 ppm/500stel;9192
ingred name: 2,4,6 tri (dimethylamino methyl) phenol
cas: 90-72-2
rtecs #: sn3500000
fraction by wt: 14%
Effects of overexposure: respiratory irrit-may cause asthma.Severe skin
irritat.Or burns if not removed promptly.
First aid: flush eyes w/clear water for 15 min-consult a dr immed.Remove
to fresh air-do not inhal.
Hcc: n1
boiling pt: b.P. Text: 405 f
vapor pres: 0.3
vapor density: 3.5
spec gravity: 0.98
solubility in water: complete
appearance and odor: dark amber liquid,ammoniacal odor
Stability indicator/materials to avoid: yes
avoid contamination w/acids
stability condition to avoid: keep away from open flame or excessive
heat.
hazardous decomposition products: carbon monoxide,carbon dioxide,oxides
of nitrogen
Waste disposal methods: burial in apprvd chemical landfill or in
accordance w/local,state, & federal regs.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: polyamide resin
fraction by wt: 65%
ingred name: diethylene triamine
cas: 111-40-0
rtecs #: ie1225000
fraction by wt: 30%
osha pel: 1 ppm
acgih tlv: s, 1 ppm; 9192
Ld50 lc50 mixture: oral ld*50(rat)1080mg/kg(deta)sup data
routes of entry: inhalation: yes skin: yes ingestion: no
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: acute: eyes: severe irritation or
burns.Skin: severe irrit or burn possible allergic
response.Inhal: resp irrit.Possible allergic
response.Chronic: possible sensitization from prolonged or repeated
exposur e.
explanation of carcinogenicity: n/a
effects of overexposure: see health haz (acute & chronic)
medical cond aggravated by exposure: asthma bronchitis
First aid: eyes: immediately flush w/ h*2o for 30 min.Contact a
physician.Skin: remove contam clothing.Wash w/ soap & h*2o.Ingest: do
not induce vomiting.Administer lg amts of h*2o or milk & transport
to a medical facility.Inhal: remove to fresh air contact a
physician if symptoms persist.
Hcc: n1
boiling pt: b.P. Text: >400,204 c
melt/freeze pt: m.P/f.P text:
decomp temp: decomp text:
vapor pres:
vapor density: 3.5
spec gravity: 0.96
ph: 10-11
evaporation rate & reference: n/a(mfr)
solubility in water: appreciable
appearance and odor: brown liquid;ammonia like odor
percent volatiles by volume: 0
corrosion rate:
Stability indicator/materials to avoid: yes
strong oxidizin agents,acids & chlorinated organic compounds
stability condition to avoid: exposure to open flames or excessive heat
hazardous decomposition products: oxides of nitrogen,carbon & ammonia
conditions to avoid polymerization: heat is generated when mixed w/
epoxy resin.Use caution when mixing quantities
Waste disposal methods: remove to a waste disposal facility operating in
compliance w/ state & local regs.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: diethylene triamine
cas: 111-40-0
rtecs #: ie1225000
fraction by wt:
other rec limits:
osha pel: 1 ppm
acgih tlv: s, 1 ppm; 9192
ingred name: tetraethylenepentamine (tepa)
cas: 112-57-2
rtecs #: kh8585000
fraction by wt: 5-15%
other rec limits:
osha pel:
acgih tlv:
ingred name: tall oil fatty acidadduct of tepa
cas: 68155-17-9
fraction by wt: >60%
other rec limits:
osha pel:
acgih tlv: