NationalStockNumber.INFO
Worldwide distributor of NSN parts and consumables located in the USA.
Worldwide distributor of NSN parts and consumables located in the USA.
A dough like substance designed to fill joints or seams and to remain sufficiently pliable after application to allow for expansion and/or contraction of joints. Excludes glazing compound, sash and putty.
| Solicitation | Return by Date | Buyer Code | Quantity |
|---|---|---|---|
| SPE8ES20T2630 | 2020-02-19 | PEPCE | 1530 CA |
| SPE8ES19T6420 | 2019-07-02 | PEPCE | 4780 CA |
| SPE8ES18T9548 | 2018-09-10 | PEPCE | 7139 CA |
| SPE8ES18T8176 | 2018-07-24 | PEPCE | 2840 CA |
| SPE8ES18T6251 | 2018-05-29 | PEPCE | 1580 CA |
| SPE8ES18T3653 | 2018-03-05 | PEPCE | 2147 CA |
| SPE8ES18T0449 | 2017-10-24 | PEPCE | 1901 CA |
| SPE8ES18T0242 | 2017-10-16 | PEPCE | 1894 CA |
| SPE8ES17T5372 | 2017-07-24 | PEPCE | 2106 CA |
| SPE8ES17T0709 | 2016-11-09 | PEPCE | 5451 CA |
Send us a request for quote using the form below. Our team will contact you with an up to date pricing and availability quote ASAP.
Caulking compounds
Glaziers' putty; grafting putty; resin cement, caulking compounds and other mastics; painters' fillings; nonrefractory surfacing preparations
Shingles, molding, wallboard
Y - Indicates information is in the hazardous materials information resource system (hmirs).
PMICA - Item does not contain precious metal.
CRITL- The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
149610 - Caulking/glaziers compounds noi
620 - Paint, in individual containers less than 10 cubic ft
9 - Other or no special handling required (sh)
A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
B - Construction materials: includes paint and related materials, prefabricated building, wood products, metal and composition mater
T - 55.0
Z - No special type of cargo code applicable
Questions & Answers: |
|
| What are the historical prices recorded for this stock number? | |
| Historical data shows pricing from $19.24 to $32.06.. | |
| Does NSN 8030-00-180-6339 have a shelf life? | |
| No. There is no shelf life applicable for this NSN. | |
| What NATO entities are users of this NSN? | |
| Department Of The Army, Department Of The Air Force, U.s. Marine Corps, Department Of The Navy, Federal Aviation Administration, U.s. Coast Guard, National Aeronautics and Space Administration, National Aeronautics and Space Administration, National Aeronautics and Space Administration, National Aeronautics and Space Administration, General Services Administration, General Services Administration, Poland, Spain, Singapore, Australia, Belgium, Canada, France, Germany, Italy, Greece, and Turkey | |
| What is the NIIN of NSN 8030-00-180-6339? | |
| 001806339 or 00-180-6339 | |
| Does NSN 8030-00-180-6339 require demilitarization? | |
| Yes - ITAR Controlled | |
| What is the most recent solicitation for NSN 8030-00-180-6339? | |
| Solicitation SPE8ES20T2630 for qty 1530 on 02/14/2020 | |
| When was this national stock number assigned to the federal catalog? | |
| Feb 16, 1970 | |
Effects of overexposure: eye nose skin respiratory irritation
First aid: eyes: flush with water 15 min consult physician skin: wipe off
wash with soap & water.
Hcc: n1
spec gravity: 1.1000
solubility in water: negligible
appearance and odor: paste, odor of acetic acid colorless(translucent)
percent volatiles by volume: 03.5
Hazardous decomposition products: combustion produces s: o2 & co2
Waste disposal methods: landfill
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: no ingredient for this formulation_ingredient
Effects of overexposure: irritates eyes.Prolonged or repeated contact
may irritate skin
First aid: wipe off.Flush w/water.Obtain medical atten. For eyes if
necessary.
Boiling pt: b.P. Text: >300f,149c
vapor pres:
spec gravity: 1.05
evaporation rate & reference:
solubility in water:
appearance and odor: paste-like,acetic acid/vineger-like.
percent volatiles by volume:
Stability indicator/materials to avoid: yes
oxidizing material
stability condition to avoid: prevent contact w air/moisture.
hazardous decomposition products: sio*2,co*2,& trcs. Of incompletely
burned c products.
Waste disposal methods: review all local,state & fed.Regs.& statutes to
determine approved disposal procedures.However,can be landfilled or
incinerate iaw local regs.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: acetoxysilane
fraction by wt: 5.0%
acgih tlv: see supp data
Routes of entry: inhalation: yes skin: yes ingestion: yes
health hazards acute and chronic: eyes: may irritate with slight pain,
redness and possible minor corneal injury. Skin: several
repeated/prolonged exposures may cause slight irritation. Inhale:
nose & throat injury may occur. Frequent ly prolonged exposure may
cause slightinjury.
effects of overexposure: eyes: may irritate with slight pain, redness
and possible minor corneal injury. Skin: several repeated/prolonged
exposures may cause slight irritation. Inhale: nose and throat
injury may occur. Freque ntly prolonged exposures may causeslight
injury.
First aid: eyes: flush with water & obtain immediate medical attention.
skin: wipe off & flush with water. Inhalation: remove to fresh
air & obtain immediate medical attention. Oral: obtain immediate
medica l attention.
Hcc: n1
boiling pt: b.P. Text: > 300 f
vapor pres: < 5 mm
spec gravity: 1.04
evaporation rate & reference: < 1 (ether=1)
solubility in water:
appearance and odor: acetic acid-like paste
percent volatiles by volume: < 5
Stability indicator/materials to avoid: yes
oxidizing material can cause a reaction. Water, moisture or humid air.
stability condition to avoid: air or moisture causes polymerization and
acetic acid vaporsare formed
hazardous decomposition products: silicone dioxide, carbon dioxide, and
traces of incompletelyburned carbon products
Waste disposal methods: all local, state & federal regulations
concerning health & pollution should be reviewed to
determineapproved disposal procedure.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: acetoxysilane
fraction by wt: 5%
acgih tlv: 10 ppm
Health hazards acute and chronic: acute; eye: irritates slightly with
redness & swelling. Skin: single short exposure (
irritate. Inhalation: vapor overexposure may irritate eyes, nose &
throat. Oral: swallowing large amou nts may cause digestive
discomfort. Some respiratory system irritation may develop if use
creates respirable particles.
effects of overexposure: chronic; skin: repeated prolonged contact (24
to 48 hours) may irritate moderately.
medical cond aggravated by exposure: overexposure to any chemical may
result in enhancement of pre-existing adverse medical conditions
and allergic reactions.
First aid: eyes: flush with water for 15 minutes. Get medical attention.
skin: wipe off and flush with water. Get medical attention if
irritation develops. Inhalation: remove to fresh air. Get medical
attention if ill effects persist. Oral: no first aid should be
needed.
Hcc: v7
vapor pres:
spec gravity: 1.03
solubility in water: less than 0.1%
appearance and odor: acetic acid-like, paste, white
percent volatiles by volume: < 5
Stability indicator/materials to avoid: yes
oxidizing material can cause a reaction. Air or moisture causes curing
and acetic acid vapors form.
stability condition to avoid: exposure to air or moisture until ready to
use.
hazardous decomposition products: titanium dioxide, silicon dioxide,
carbon dioxide, and traces of incompletely burned carbon products.
Waste disposal methods: dow corning suggests that all local, state and
federal regulations concerning health and pollution be reviewed to
determine approved disposal procedures. Contact dow corning if
there are any disposal questions.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: methyltriacetoxysilane (limits are for acetic acid, formed
during curing on exposure to water or humid air)
cas: 4253-34-3
rtecs #: vv4500000
fraction by wt: 2%
other rec limits: none specified
osha pel: 10 ppm
acgih tlv: 10 ppm/stel 15 ppm
ingred name: ethyltriacetoxysilane (limits are for acetic acid, formed
during curing on exposure to water or humid air)
cas: 17689-77-9
fraction by wt: 2%
other rec limits: none specified
osha pel: 10 ppm
acgih tlv: 10 ppm/stel 15 ppm
ingred name: silica, amorphous
cas: 112945-52-5
rtecs #: vv7310000
fraction by wt: 10%
other rec limits: none specified
osha pel: 6 mg/m3
acgih tlv: 10 mg/m3 total dust
Health hazards acute and chronic: eye: direct contact irritates slightly
to moderately wit redness & swelling. Skin: a single short exposure
(less than 24 hours) may irritate. Repeated/prolonged contact (24
to 48 hurs) may irritate mo derately. Inhalation: vapor
overexposure may irritate eyes, nose, throat. Oral: small amounts
transferred to the mouth
effects of overexposure: oral: ..By fingers during use, etc., should not
injure. Swallowing large amounts may cause digestive discomfort.
comments: no injury from dusts should occur during reasonable use.
if use creates respi rable particles some respiratory systeminjury
may occur. Cured sealant is non-hazardous.
medical cond aggravated by exposure: effects of overexposure are based
on actual data, results of studies performed upon similar
compositions, component data &/or expert reveiw of the product.
overexpo to any product may result in
First aid: eyes: flush with water for 15 minutes. Get medical attention.
skin: wipe off and flush with water. Get medical attention if
irritation develops. Inhalation: remove to fresh air. Get medical
attention if ill effects persist. Oral: no first aid should be
needed.
Hcc: v7
vapor pres: < 5 mm
vapor density: above 1
spec gravity: 1.02
solubility in water: less than 0.1
appearance and odor: acetic acid-like, paste
percent volatiles by volume: < 5
Stability indicator/materials to avoid: yes
oxidizing material can cause a reaction. Air or moisture causes curing
& acetic acid vapors form.
stability condition to avoid: exposure to air or moisture until ready to
use.
hazardous decomposition products: silicon dioxide, carbon dioxide, &
traces of incompletely burned carbon products.
Waste disposal methods: dispose of in accordance with all local, state &
federal regulations concerning health & pollution be reviewed to
determine approved disposal procedures. Contact inland packaging,
inc. If there are an y disposal questions.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: methyltriacetoxysilane
cas: 4253-34-3
rtecs #: vv4500000
fraction by wt: 2%
other rec limits: none specified
osha pel: 10 ppm
acgih tlv: 10 ppm;stel 15 ppm
ingred name: ethyltriacetoxysilane
cas: 17689-77-9
fraction by wt: 2%
other rec limits: none specified
osha pel: 10 ppm
acgih tlv: 10 ppm;stel 15 ppm
ingred name: silica, amorphous
cas: 112945-52-5
rtecs #: vv7310000
fraction by wt: 8%
other rec limits: none specified
osha pel: 6 mg/m3
acgih tlv: 10 mg/m3
Ld50 lc50 mixture: oral ld50 (rat) is 25000 mg/kg
routes of entry: inhalation: yes skin: no ingestion: no
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: ingest: harmful if swallowed. Skin:
uncured product contact will irritate lips, gums & tongue. Uncured
product contact may irritate the skin. Inhalation: causes moderate
respiratory irritation. Causes irritation of the mouth, nose &
throat. Eye: uncured product contact irritates eyes.
explanation of carcinogenicity: this product or one of its ingredients
present 0.1% or more is not listed as a carcinogen/suspect by ntp,
iarc, or osha.
effects of overexposure: none specified by manufacturer.
medical cond aggravated by exposure: none known.
First aid: ingest: none known. Skin: to clean from skin, remove completely
with a dry cloth or paper towel, before washing with detergent and
water. Inhalation: move person to fresh air. Eyes: in case of
contact, i mmediately flush eyes with plenty of water for at least
15 min & get medical attention if irritation persists.
Hcc: n1
spec gravity: 1.06 (h2o=1)
evaporation rate & reference: >1 (butyl acetate = 1)
solubility in water: insoluble
appearance and odor: translucent paste with adetic odor.
percent volatiles by volume:
Stability indicator/materials to avoid: yes
none known.
stability condition to avoid: none known.
hazardous decomposition products: carbon dioxide, carbon monoxide,
silicon dioxide, acetic acid.
Waste disposal methods: disposal should be made in accordance with
federal, state and local regulations.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: methyltriacetoxysilane
cas: 4253-34-3
rtecs #: vv4500000
fraction by wt: 1-5%
other rec limits: none recommended
osha pel: 10 ppm
acgih tlv: 10 ppm
ingred name: trade secret component
fraction by wt: 10-30%
other rec limits: none recommended
ingred name: trade secret component
fraction by wt: 10-30%
other rec limits: none recommended
ingred name: dimethyl polysiloxane silanol
cas: 70131-67-8
fraction by wt: 60-80%
other rec limits: none recommended
Routes of entry: inhalation: yes skin: yes ingestion: no
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: eye, nose, throat irritation. Possible
skin irritation.
First aid: eyes: immediately flush w/large amounts water holding eyelids
open. Get medical aid if irritation persists. Skin: wipe material
from skin w/cloth or paper towel, then wash exposed area w/soap &
water. get medical aid if irrit persists. Inhalation: move to
fresh air. Get med aid if irrit persists. Ingestion: contact poison
control/dr. Immediately.
Hcc: n1
Hazardous decomposition products: silicone dioxide, carbon monoxide,
carbon dioxide, formaldehyde.
Waste disposal methods: in accordance w/federal, state, local
regulations.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: amorphous silica
cas: 68855-54-9
fraction by wt: 100.0%
other rec limits: none recommended
osha pel: 20 mg/m3
acgih tlv: 10 mg/m3
ingred name: ethyl triacetoxysilane
other rec limits: none recommended
osha pel: 10 mg/m3
acgih tlv: 10 mg/m3
ingred name: titanium dioxide.
cas: 13463-67-7
other rec limits: none recommended
osha pel: 15 mg/m3
acgih tlv: not est.
Routes of entry: inhalation: yes skin: yes ingestion: yes
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: eye: irritation, red swelling. Skin:
irritation. Inhal: irritation. Ingest: digestive discomfort.
First aid: eye: flush w/water for 15 minutes. Get med aid. Skin: wipe
off & flush w/water. Get med aid. Inhal: get fresh air. Get med
aid.
Spec gravity: 1.03
solubility in water: none
appearance and odor: acetic, acid-like paste.
Stability indicator/materials to avoid: yes
oxidizing material can cause a reaction. Air or moisture causes curing.
acetic acid, vapor form.
stability condition to avoid: exposure to air or moisture until ready to
use.
hazardous decomposition products: silicon dioxide, carbon dioxide &
traces of incompletely burned carbon products.
Waste disposal methods: in accordance w/local, state & federal
regulations.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: methyltriacetoxysilane
cas: 4253-34-3
rtecs #: vv4500000
fraction by wt: 2.0%
other rec limits: none recommended
osha pel: 10 ppm/stel 15 ppm
acgih tlv: 10 ppm/stel 15 ppm
ingred name: ethyltriacetoxysilane
cas: 17689-77-9
fraction by wt: 2.0%
other rec limits: none recommended
osha pel: 10 ppm/stel 15 ppm
acgih tlv: 10 ppm/stel 15 ppm
ingred name: silica, amorphous, diatomaceous earth
cas: 61790-53-2
rtecs #: hl8600000
fraction by wt: 10.0%
other rec limits: none recommended
osha pel: 6 mg/m3
acgih tlv: 10 mg/m3 tdust
Effects of overexposure: eye, nose and throat irritation. Possible skin
irritation.
First aid: eyes: flush eyes with large amounts of water while holding
the eyelids open.Get medical attention if irritation persists.Skin:
wipe material from skin with cloth or paper towel, then wash
exposed area with soap and water.Get medical help if irritation
persists.Inhalation: move victim to fresh air.Get medical help if
irritation persists. Ingestion: contact local poison control center
or physician im mediately.
Vapor density: >1
spec gravity: >1
solubility in water: insoluble
appearance and odor: thick liquid slight vinegar odor
percent volatiles by volume:
Stability indicator/materials to avoid: yes
moisture will release acetic acid vapor
stability condition to avoid: avoid extreme heat
hazardous decomposition products: silicone dioxide, carbon monoxide,
carbon dioxide, traces of formaldehyde
Waste disposal methods: dispose of according to local, state, and
federal regulations
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: silica
cas: 7631-86-9
= wt: 11.
osha pel: 20
acgih tlv: 20
ingred name: methyltriacetoxysilane
cas: 4253-34-3
rtecs #: vv4500000
= wt: 2.
osha pel: 10ppm
acgih tlv: 10 ppm
ingred name: ethyltriacetoxysilane
cas: 17689-77-9
= wt: 2.
ingred name: titanium dioxide
cas: 13463-67-7
rtecs #: xr2275000
= wt: 2.
osha pel: 15 mg/m3
acgih tlv: 10 mg/m3
ingred name: non-hazardous
> wt: 75.