Worldwide distributor of NSN parts and consumables located in the USA.
Send us a request for quote using the form below. Our team will contact you with an up to date pricing and availability quote ASAP.
Y - Indicates information is in the hazardous materials information resource system (hmirs).
PMICA - Item does not contain precious metal.
CRITL- The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
030980 - Brazing paste copper in bbl/bx
635 - Chemicals, other than drugs or sundries
9 - Other or no special handling required (sh)
A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
C - Chemical corps items and all other chemicals not covered in other classificatons. note: when an item has a chemical proper shipp
Q - 70.0
W - Corrosive materials, un class 8 (corrosive label)
Questions & Answers: |
|
What are the historical prices recorded for this stock number? | |
Historical data shows pricing from $642.94 to $1,071.56.. | |
Does NSN 8030-00-187-7747 have a shelf life? | |
No. There is no shelf life applicable for this NSN. | |
What NATO entities are users of this NSN? | |
Spain, Malaysia, and Australia | |
What is the NIIN of NSN 8030-00-187-7747? | |
001877747 or 00-187-7747 | |
Does NSN 8030-00-187-7747 require demilitarization? | |
Yes - ITAR Controlled | |
What is the most recent solicitation for NSN 8030-00-187-7747? | |
No solicitations for this NSN. | |
When was this national stock number assigned to the federal catalog? | |
Mar 14, 1973 |
Ld50 lc50 mixture: 414 mg/kg oral/850 mg/kg dermal/316ppm
routes of entry: inhalation: yes skin: yes ingestion: yes
health hazards acute and chronic: extreme irritation to eyes, skin and
respiratory tract.
effects of overexposure: sensitizer, eye corrosive, corrosive.
medical cond aggravated by exposure: preclude from exposure those with
skin, sinus or lung disease.
First aid: move to fresh air & give cpr if needed. Immediately flush
eyes with water for 15 min. Remove contaminated clothes. Wash with
soap and water. Do not induce vomiting. Rinse mouth with water.
drink large quantities of water immediately. Call hospital,
physician, or poison control center immediately.
Vapor pres: .01
vapor density: >than air
spec gravity: 1.65
evaporation rate & reference: slower: n-butyl acetate
solubility in water: slight
appearance and odor: light grey thixotropic paste with ammonia odor.
Stability indicator/materials to avoid: yes
strong oxidizing agents, acids, epoxy resin, amine mixtures, reducing
agents.
hazardous decomposition products: acrid smoke, oxides of carbon, oxides
of nitrogen.
Waste disposal methods: use sand to absorb spill and dispose of in
proper manner. Label empty containers hazardous. Dispose of in
accordance with local, state and federal regulations.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: titanium dioxide
cas: 13463-67-7
rtecs #: xr2275000
other rec limits: none specified
osha pel: 15 mg/m3 tdust
acgih tlv: 10 mg/m3 tdust; 9293
ingred name: 2,4,6-dimethylamino methyl phenol (vapor pressure .01)
cas: 90-72-2
rtecs #: sn3500000
other rec limits: none specified
ingred name: diethylene triamine
cas: 111-40-0
rtecs #: ie1225000
other rec limits: lel 1.0
osha pel: 1 ppm
acgih tlv: s, 1 ppm; 9192
ingred name: phenol (vapor pressure .36)
cas: 108-95-2
rtecs #: sj3325000
other rec limits: lel 1.7
osha pel: 5 mg/m3
acgih tlv: 5 ppm/ 10 mg/m3
epa rpt qty: 1000 lbs
dot rpt qty: 1000 lbs
Routes of entry: inhalation: no skin: yes ingestion: no
health hazards acute and chronic: danger! Sensitizer! Extremely
irritating to skin and eyes.
First aid: move to fresh air and give artificial respiration if
necessary. Flush eyes with water for 15 minutes. Wash skin with
soap and water. If swallowed, induce vomiting. Remove contaminated
clothing. Call a physician or take to a hospital immediately.
Hcc: t6
boiling pt: b.P. Text: nia
melt/freeze pt: m.P/f.P text: nia
vapor pres:
vapor density: > air
spec gravity: 2.8
evaporation rate & reference: slower than butyl acetate
solubility in water: negligible (0.1%)
appearance and odor: grey thixotropic paste with no odor.
percent volatiles by volume: 0.0
Stability indicator/materials to avoid: yes
avoid strong oxidizing agents, amines. Avoid epoxy resin and amine
mixtures.
hazardous decomposition products: oxides of carbon. Aldehydes.
conditions to avoid polymerization: avoid strong acids or bases in bulk.
Waste disposal methods: landfill in accordance with local, state and
federal regulations. Solidify and dispose of properly.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: dgeba-epoxy resin (vapor pressure 0.01 mm hg @ 20 c)
cas: 25068-38-6
rtecs #: kd4380000
fraction by wt: nia
other rec limits: none specified
osha pel: nia
acgih tlv: nia
ingred name: dgebf-epoxy resin
cas: 28064-14-4
fraction by wt: nia
other rec limits: none specified
osha pel: nia
acgih tlv: nia
Ld50 lc50 mixture: ld50 orl 413.99-rat; ld50 derm 849.99 **
routes of entry: inhalation: yes skin: yes ingestion: yes
health hazards acute and chronic: danger! Sensitizer! Eye corrosive!
toxic by ingestion. Extremely irritating to skin and eyes.
corrosive. Irritates nose and trachea. Irritates eyes and
respiratory tract.
explanation of carcinogenicity: **-rbt; lc50 315.99 inhal-rat.
medical cond aggravated by exposure: preclude from exposure those
individuals with diseases of the skin, sinuses & lungs.
First aid: move to fresh air & give cpr if necessary. Flush eyes
w/water-15 min. Immediate first aid is necessary to prevent eye
damage. Wash skin w/soap & water. If swallowed, do not induce
vomiting-call poison ctr at (516)542-2323. Rinse mouth withwater.
drink large quantities of water immediately. Remove contaminated
clothing. Call a physician or take to a hospital immediately.
Hcc: t6
boiling pt: b.P. Text: nia
melt/freeze pt: m.P/f.P text: nia
vapor pres:
vapor density: > air
spec gravity: 1.65
evaporation rate & reference: slower than butyl acetate
solubility in water: slight (0.1-1.0%)
appearance and odor: light grey thixotropic paste with ammoniacal odor.
percent volatiles by volume: 0.0
Stability indicator/materials to avoid: yes
avoid strong oxidizing agents, acids & reducing agents. Avoid zinc
powders, aluminum, epoxy resin, amine mixtures.
stability condition to avoid: *spills/cool cntnrs w/water.Do not use
direct water stream.Stay upwind.Avoid smoke/fumes.Water/foam may
cause frothing.
hazardous decomposition products: acrid smoke. Oxides of carbon. Oxides
of nitrogen.
conditions to avoid polymerization: avoid aldehydes.
Waste disposal methods: use sand to absorb spill & dispose of in proper
manner. Label empty containers hazardous. Do not heat or cut empty
containers with electric or gas torch. Dispose of in accordance
with local, state and federal regulations.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: titanium dioxide
cas: 13463-67-7
rtecs #: xr2275000
fraction by wt: nia
other rec limits: none specified
osha pel: 15 mg/m3 tdust
acgih tlv: 10 mg/m3 tdust; 9293
ingred name: 2,4,6-dimethylaminomethylphenol (vapor pressure 0.01 mm hg
@ 20 c)
cas: 90-72-2
rtecs #: sn3500000
fraction by wt: nia
other rec limits: none specified
osha pel: nia
acgih tlv: 5.0 ppm
ingred name: diethylene triamine
cas: 111-40-0
rtecs #: ie1225000
fraction by wt: nia
other rec limits: none specified
osha pel: 1 ppm
acgih tlv: s, 1 ppm; 9192
ingred name: phenol (vapor pressure 0.36 mm hg @ 20 c) (lel 1.7)
cas: 108-95-2
rtecs #: sj3325000
fraction by wt: nia
other rec limits: none specified
osha pel: 5.0 ppm
acgih tlv: 5.0 ppm; 9.999 mg/m3
epa rpt qty: 1000 lbs
dot rpt qty: 1000 lbs
Ld50 lc50 mixture: oral ld50 (rat) = 10300 mg/kg
routes of entry: inhalation: yes skin: yes ingestion: yes
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: acute: may cause eye & skin
irritation. May cause respiratory tract irritation and central
nervous system depression if inhaled. Loss of consciousness and
even death can occur at high levels of exposu re.
explanation of carcinogenicity: not listed as a carcinogen by ntp, iarc
or osha
effects of overexposure: inhalation: coughing, wheezing, shortness of
breath, naysea, vomiting, headache, dizziness, drowsiness,
unconsciousness or death. Eyes: redness, tearing, discomfort. Skin:
dryness, redness or rash, it ching or discomfort. Ingested: nausea,
vomiting, diarrhea.
medical cond aggravated by exposure: none specified by manufacturer.
First aid: inhalation: remove to fresh air. If not breathing, give
artificial respiration. If breathing is difficult, give oxygen.
call a physician. Eye: flush immediately with large amounts of
water for 15 minu tes. Get medical attention. Skin:
removecontaminated clothing. Wash with soap and water promptly.
ingestion: do not induce vomiting. Get immediate medical attention.
Hcc: t4
boiling pt: b.P. Text: >160f,>71c
vapor density: >1 (air=1)
spec gravity: 1.2
evaporation rate & reference:
appearance and odor: colorless liquid
percent volatiles by volume: 100
Stability indicator/materials to avoid: yes
strong oxidizing agents
stability condition to avoid: high heat, open flames and other sources
of ignition
hazardous decomposition products: highly toxic and irritating hydrogen
chloride and phosgene fumes; oxides of carbon
Waste disposal methods: dispose of in accordance with federal, state &
local regulations.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: methyl chloroform (1,1,1-trichloroehane) (sara iii)
cas: 71-55-6
rtecs #: kj2975000
fraction by wt: 100%
other rec limits: none recommended
osha pel: 350 ppm/450 stel
acgih tlv: 350 ppm/450stel;9293
epa rpt qty: 1000 lbs
dot rpt qty: 1000 lbs
ozone depleting chemical: 1
Routes of entry: inhalation: no skin: yes ingestion: no
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: may cause skin and eye irritation on
contact. May cause dermatitis on prolonged or repeated contact.
explanation of carcinogenicity: none
effects of overexposure: eyes: redness, tearing, blurred vision,
discomfort. Skin: redness or rash, itching or discomfort.
medical cond aggravated by exposure: none specified by manufacturer.
First aid: inhaled: remove to fresh air. Skin: remove contaminated
clothing. Wash with soap and water. If symptoms develop, see
doctor. Eyes: flush with lots of water for 15 minutes while holding
eyelids open. S ee doctor. Ingested: none specified by
manufacturer. Get immediate medical attention.
Hcc: v5
vapor density: >1(air=1)
spec gravity: 0.96
evaporation rate & reference:
appearance and odor: none specified by manufacturer.
Stability indicator/materials to avoid: yes
strong mineral acids, epoxy resins
stability condition to avoid: contact with incompatibles; sources of
ignition
hazardous decomposition products: none specified by manufacturer. Hmis:
oxides of carbon
conditions to avoid polymerization: avoid contact with incompatibles
Waste disposal methods: dispose of in accordance with local, state and
federal regulations. Manufacturer recommendes landfill or
incineration.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: aminoethylpiperazine hardener
fraction by wt: 30%
other rec limits: none recommended
Ld50 lc50 mixture: tlv= 450 ppm
routes of entry: inhalation: yes skin: yes ingestion: no
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: vapors may cause central nervous
system depression if inhaled. Liquid may irritate skin and eyes on
contact.
explanation of carcinogenicity: none
effects of overexposure: inhaled: dizziness, headache, drowsiness,
weakness, nausea, vomiting. Eyes: redness, tearing, blurred vision.
skin; redness, itching.
medical cond aggravated by exposure: none specified by manufacturer.
First aid: inhaled: remove person to fresh air; restore breathing if
needed. eyes: flush with water for 15 minutes while holding
eyelids open. Skin: remove contaminated clothes. Wash with soap and
water. Ingest ed: get immediate medical help.
Hcc: f2
boiling pt: b.P. Text: >149f,>65c
vapor pres: 1 mm hg
vapor density: >1 (air=1)
spec gravity: 0.72
appearance and odor: liquid
Stability indicator/materials to avoid: yes
strong oxidizing agents
stability condition to avoid: sources of ignition.
hazardous decomposition products: oxides of carbon
Waste disposal methods: dispose of in accordance with local, state and
federal regulations.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: hydrocarbons
other rec limits: none recommended
ingred name: silicon
cas: 7440-21-3
rtecs #: vw0400000
other rec limits: none recommended
osha pel: 15 mg/m3 tdust
acgih tlv: 10 mg/m3 tdust; 9293
Ld50 lc50 mixture: oral ld50 (rat) is 2.8 c/c/kg
routes of entry: inhalation: no skin: yes ingestion: no
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: may cause skin and eye irritation on
prolonged or repeated contact. May cause skin sensitization or
allergic responses. May cause skin dermatitis.
explanation of carcinogenicity: none
effects of overexposure: eyes: redness, pain, tearing, blurred vision.
skin: redness, itching, burning sensation.
medical cond aggravated by exposure: none specified by manufacturer.
First aid: eyes: flush with lots of water for 15 minutes while holding
eyelids open. See doctor. Skin: remove contaminateted clothes. Wash
with soap and water. Inhaled: remove to fresh air. Ingested: get
immedia te medical attention.
Hcc: c2
vapor density: >1 (air=1)
spec gravity: 1.92
evaporation rate & reference:
appearance and odor: none specified by manufacturer.
percent volatiles by volume: 0
Stability indicator/materials to avoid: yes
strong mineral acids and epoxy resins
stability condition to avoid: sources of ignition and contact with
incompatibles.
hazardous decomposition products: oxides of carbon, oxides of nitrogen
conditions to avoid polymerization: contact with epoxy resins
Waste disposal methods: dispose of in accordance with local, state and
federal regulations. Manufacturer recommends incineration or
landfill.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: bisphenol a resin
cas: 8005-70-0
fraction by wt: 100%
other rec limits: none recommended
Routes of entry: inhalation: yes skin: yes ingestion: no
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: corrosive. Acute: causes burns to skin
& eyes. Chronic: chemical burns & sensitization.
explanation of carcinogenicity: not relevant.
effects of overexposure: corrosive.
medical cond aggravated by exposure: skin & eye conditions.
First aid: inhale-remove source of contamination &/or move victim to
fresh air. If recovery is delayed, obtain medical attention.
eye-flush w/water for at least 15 mins. Immediate first aid is
needed to prevent eye damage. Seek physician. Skin-immediately
remove excess with a clean cloth & wash w/soap & water. See
physician. Ingest-do not induce vomiting. Rinse mouth with water &
drink 1 cup water. See doc.
Boiling pt: b.P. Text: >347f,>175c
vapor pres: 0.22 @ 25c
vapor density: >air
spec gravity: 1.66
solubility in water: slight (0.1-1.0%)
appearance and odor: light gray paste w/ammonical odor.
percent volatiles by volume: 0
Stability indicator/materials to avoid: yes
strong oxidizing agents, acids, epoxy resin & isocyanates.
stability condition to avoid: not applicable.
hazardous decomposition products: gaseous combination of carbon,
hydrogen, nitrogen & oxygen may occur at elevated temperature.
Waste disposal methods: dispose of in accordance with local, state &
federal regulations.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: diethylene triamine. Ld50: (oral) 1080 mg/kg
cas: 111-40-0
rtecs #: ie1225000
fraction by wt: 10-30%
osha pel: 1 ppm, s
acgih tlv: 1 ppm, s
ingred name: talc powder, (containing no asbestos fibers); (talc)
cas: 14807-96-6
rtecs #: ww2700000
fraction by wt: 40-70%
osha pel: 2 mg/m3 rdust
acgih tlv: 2 mg/m3 rdust
ingred name: titanium oxide; (titanium dioxide)
cas: 13463-67-7
rtecs #: xr2275000
fraction by wt: 1-5%
osha pel: 15 mg/m3 tdust
acgih tlv: 10 mg/m3 tdust; 9293
ingred name: phenol (sara iii). Ld50: (oral) 414 mg/kg
cas: 108-95-2
rtecs #: sj3327000
fraction by wt: 1-5%
osha pel: 5 ppm, s
acgih tlv: 5 ppm, s
epa rpt qty: 1000 lbs
dot rpt qty: 1000 lbs
ingred name: phenol, 2,4,6-tris(dimethylaminomethyl);
(trisdimethylamino- methyl phenol). Ld50: (oral) 1637 mg/kg
cas: 90-72-2
rtecs #: sn3500000
fraction by wt: 1-5%
Routes of entry: inhalation: no skin: yes ingestion: no
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: acute: skin and eye irritation.
chronic: irritation, sensitization and dermatitis.
explanation of carcinogenicity: not relevant.
effects of overexposure: skin sensitizer and skin irritation.
medical cond aggravated by exposure: skin & eye conditions.
First aid: inhale-remove source of contamination &/or move victim to
fresh air. If recovery is delayed, obtain medical attention.
eye-flush w/water for at least 15 mins. Immediate first aid is
needed to prevent eye damage. Seek physician. Skin-immediately
remove excess with a clean cloth & wash w/soap & water. See
physician. Ingest-do not induce vomiting. Rinse mouth with water &
drink 1 cup water. See doc.
Boiling pt: b.P. Text: decomposes
vapor pres: nia
vapor density: nia
spec gravity: 2.80
evaporation rate & reference: n.Ap
solubility in water: negligible
appearance and odor: dark gray paste with epoxy odor.
percent volatiles by volume: n.Ap
Stability indicator/materials to avoid: yes
strong oxidizing agents, acids, bases and amines.
stability condition to avoid: not applicable.
hazardous decomposition products: gaseous combination of carbon,
hydrogen, & oxygen may occur at elevated temperature.
Waste disposal methods: dispose of in accordance with local, state &
federal regulations.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: dgba epoxy resins
cas: 25068-38-6
rtecs #: sl6475000
fraction by wt: 10-30%
other rec limits: none recommended
ingred name: epoxidized phenol-formaldehyde novolac
cas: 28064-14-4
fraction by wt: 10-30%
other rec limits: none recommended
ingred name: modified silica
cas: 92797-60-9
fraction by wt: 1-5%
other rec limits: none recommended
Ld50 lc50 mixture: oral ld50 (rat) is >2000 mg/kg
routes of entry: inhalation: no skin: yes ingestion: no
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: prolonged or repeated contact may
cause eye irritation and other allergic responses such as skin
irritation or dermatitis.
explanation of carcinogenicity: not carcinogenic.
effects of overexposure: none specified by manufacturer.
medical cond aggravated by exposure: none specified by manufacturer.
First aid: in case of skin contact wash immediately with soap & water
for eyes, flush with plenty of water for 15 minutes and consult a
physician immediately. Remove and wash contaminated clothing before
reuse.
Hcc: n1
boiling pt: b.P. Text: 500f,260c
vapor density: >air
evaporation rate & reference: slower than ether
percent volatiles by volume: 0
Stability indicator/materials to avoid: yes
strong acids, amines, mercaptans and bases.
stability condition to avoid: none specified by manufacturer.
hazardous decomposition products: none specified by manufacturer.
Waste disposal methods: incinerate in furnance or bury in landfill in
accordance with local, state and federal regulations.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: non hazardous ingredient
other rec limits: none recommended
Ld50 lc50 mixture: oral ld50 (rat) is 2.8 c/c/kg
routes of entry: inhalation: no skin: yes ingestion: no
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: prolonged or repeated contact may
cause eye irritation and other allergic responses such as skin
irritation or dermatitis.
explanation of carcinogenicity: not carcinogenic.
effects of overexposure: none specified by manufacturer.
medical cond aggravated by exposure: none specified by manufacturer.
First aid: in case of skin contact wash immediately with soap & water
for eyes, flush with plenty of water for 15 minutes and consult a
physician immediately. Remove and wash contaminated clothing before
reuse.
Hcc: c1
vapor density: >air
evaporation rate & reference: slower than ether
percent volatiles by volume: 0
Stability indicator/materials to avoid: yes
strong acids, and epoxy resins.
stability condition to avoid: none specified by manufacturer.
hazardous decomposition products: none specified by manufacturer.
Waste disposal methods: incinerate in furnance or bury in landfill in
accordance with local, state and federal regulations.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: corrosive
fraction by wt: 100%
other rec limits: none recommended
Ld50 lc50 mixture: oral ld50 (rat) is 2.8 c/c/kg
routes of entry: inhalation: no skin: yes ingestion: no
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: prolonged or repeated contact may
cause eye irritation and other allergic responses such as skin
irritation or dermatitis.
explanation of carcinogenicity: not carcinogenic.
effects of overexposure: none specified by manufacturer.
medical cond aggravated by exposure: none specified by manufacturer.
First aid: in case of skin contact wash immediately with soap & water
for eyes, flush with plenty of water for 15 minutes and consult a
physician immediately. Remove and wash contaminated clothing before
reuse.
Hcc: c1
vapor density: >air
evaporation rate & reference: slower than ether
percent volatiles by volume: 0
Stability indicator/materials to avoid: yes
strong acids, and epoxy resins.
stability condition to avoid: none specified by manufacturer.
hazardous decomposition products: none specified by manufacturer.
Waste disposal methods: incinerate in furnance or bury in landfill in
accordance with local, state and federal regulations.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: corrosive
fraction by wt: 100%
other rec limits: none recommended
Ld50 lc50 mixture: oral ld50 (rat) is 2.8 c/c/kg
routes of entry: inhalation: no skin: yes ingestion: no
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: prolonged or repeated contact may
cause eye irritation and other allergic responses such as skin
irritation or dermatitis.
explanation of carcinogenicity: not carcinogenic.
effects of overexposure: none specified by manufacturer.
medical cond aggravated by exposure: none specified by manufacturer.
First aid: in case of skin contact wash immediately with soap & water
for eyes, flush with plenty of water for 15 minutes and consult a
physician immediately. Remove and wash contaminated clothing before
reuse.
Hcc: n1
vapor density: >air
evaporation rate & reference: slower than ether
percent volatiles by volume: 0
Stability indicator/materials to avoid: yes
strong acids, and epoxy resins.
stability condition to avoid: none specified by manufacturer.
hazardous decomposition products: none specified by manufacturer.
Waste disposal methods: incinerate in furnance or bury in landfill in
accordance with local, state and federal regulations.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: aminoethylpiperazine hardner
other rec limits: none recommended
Routes of entry: inhalation: unknown skin: yes ingestion: yes
health hazards acute and chronic: irritation, sensitization and
dermatitis.
effects of overexposure: irritation, sensitization, and dermatitis
medical cond aggravated by exposure: allergy, eczema, or skin
conditions.
First aid: eyes: immediately flush eyes with water for at least 15
minutes. call a physician. skin: promptly wash with mild soap and
water. ingestion: if conscious, give large quantities of water.
get medica l attention. inhalation: remove to fresh air. give
oxygen if breathin is difficult. other: promptly remove wet
contaminated non-impervious clothing. wash before reuse.
Boiling pt: b.P. Text: 500f
decomp temp: =204.4c, 400.F
decomp text: 400f
vapor pres: < 1mm hg @ 20'c
vapor density: >air
spec gravity: .96
viscosity: 2-3 poises
evaporation rate & reference:
solubility in water: insoluble
appearance and odor: a= metal colored liquid; b= amber liquid/ amines
Stability indicator/materials to avoid: yes
strong acids, bases, and mercaptans in bulk. avoid strong oxidizing
agents.
stability condition to avoid: avoid strong acids, bases, and mercaptans
in bulk. avoid elevated temperatures.
hazardous decomposition products: carbone monoxide, carbon dioxide,
aldehydes.
conditions to avoid polymerization: hazardous polymerization: may
occur. avoid materials listed for incompatibility.
Waste disposal methods: incinerate in furnace or bury in landfill in
accordance with federal, state or local regulations.
Ingred name: n-aminoethylpiperazine
cas: 140-31-8
rtecs #: tk8050000
< wt: 40.
Routes of entry: inhalation: unknown skin: yes ingestion: yes
health hazards acute and chronic: irritation, sensitization and
dermatitis.
effects of overexposure: irritation, sensitization, and dermatitis
medical cond aggravated by exposure: allergy, eczema, or skin
conditions.
First aid: eyes: immediately flush eyes with water for at least 15
minutes. call a physician. skin: promptly wash with mild soap and
water. ingestion: if conscious, give large quantities of water.
get medica l attention. inhalation: remove to fresh air. give
oxygen if breathin is difficult. other: promptly remove wet
contaminated non-impervious clothing. wash before reuse.
Boiling pt: >260.C, 500.F
b.P. Text: 500f
decomp temp: =204.4c, 400.F
decomp text: 400f
vapor pres: < 1mm hg @ 20'c
vapor density: >air
spec gravity: 1.98
viscosity: 20-30 poises
evaporation rate & reference:
solubility in water: insoluble
appearance and odor: a= metal colored liquid; b= amber liquid/ amines
Stability indicator/materials to avoid: yes
strong acids, bases, and mercaptans in bulk. avoid strong oxidizing
agents.
stability condition to avoid: avoid strong acids, bases, and mercaptans
in bulk. avoid elevated temperatures.
hazardous decomposition products: carbone monoxide, carbon dioxide,
aldehydes.
conditions to avoid polymerization: hazardous polymerization: may
occur. avoid materials listed for incompatibility.
Waste disposal methods: incinerate in furnace or bury in landfill in
accordance with federal, state or local regulations.
Ingred name: bisphenol a-epichlorohydrin epoxy resin
cas: 25068-38-6
rtecs #: ce6880000
< wt: 33.
Routes of entry: inhalation: unknown skin: yes ingestion: yes
health hazards acute and chronic: irritation, sensitization and
dermatitis.
effects of overexposure: irritation, sensitization, and dermatitis
medical cond aggravated by exposure: allergy, eczema, or skin
conditions.
First aid: eyes: immediately flush eyes with water for at least 15
minutes. call a physician. skin: promptly wash with mild soap and
water. ingestion: if conscious, give large quantities of water.
get medica l attention. inhalation: remove to fresh air. give
oxygen if breathin is difficult. other: promptly remove wet
contaminated non-impervious clothing. wash before reuse.
Boiling pt: >260.C, 500.F
b.P. Text: 500f
decomp temp: =204.4c, 400.F
decomp text: 400f
vapor pres: < 1mm hg @ 20'c
vapor density: >air
spec gravity: 2.19
evaporation rate & reference:
solubility in water: insoluble
appearance and odor: a= metal colored liquid; b= amber liquid/ amines
Stability indicator/materials to avoid: yes
strong acids, bases, and mercaptans in bulk. avoid strong oxidizing
agents.
stability condition to avoid: avoid strong acids, bases, and mercaptans
in bulk. avoid elevated temperatures.
hazardous decomposition products: carbone monoxide, carbon dioxide,
aldehydes.
conditions to avoid polymerization: hazardous polymerization: may
occur. avoid materials listed for incompatibility.
Waste disposal methods: incinerate in furnace or bury in landfill in
accordance with federal, state or local regulations.
Ingred name: bisphenol a-epichlorohydrin epoxy resin
cas: 25068-38-6
rtecs #: ce6880000
< wt: 33.
Routes of entry: inhalation: unknown skin: yes ingestion: yes
health hazards acute and chronic: irritation, sensitization and
dermatitis.
effects of overexposure: irritation, sensitization, and dermatitis
medical cond aggravated by exposure: allergy, eczema, or skin
conditions.
First aid: eyes: immediately flush eyes with water for at least 15
minutes. call a physician. skin: promptly wash with mild soap and
water. ingestion: if conscious, give large quantities of water.
get medica l attention. inhalation: remove to fresh air. give
oxygen if breathin is difficult. other: promptly remove wet
contaminated non-impervious clothing. wash before reuse.
Boiling pt: >260.C, 500.F
b.P. Text: 500f
decomp temp: =204.4c, 400.F
decomp text: 400f
vapor pres: < 1mm hg @ 20'c
vapor density: >air
spec gravity: 2.19
viscosity: 20-30 poises
evaporation rate & reference:
solubility in water: insoluble
appearance and odor: a= metal colored liquid; b= amber liquid/ amines
Stability indicator/materials to avoid: yes
strong acids, bases, and mercaptans in bulk. avoid strong oxidizing
agents.
stability condition to avoid: avoid strong acids, bases, and mercaptans
in bulk. avoid elevated temperatures.
hazardous decomposition products: carbone monoxide, carbon dioxide,
aldehydes.
conditions to avoid polymerization: hazardous polymerization: may
occur. avoid materials listed for incompatibility.
Waste disposal methods: incinerate in furnace or bury in landfill in
accordance with federal, state or local regulations.
Ingred name: diglycidyl ether of bis-phenol-a epoxy resin
cas: 25068-38-6
rtecs #: ce6880000
< wt: 33.
Routes of entry: inhalation: unknown skin: yes ingestion: yes
health hazards acute and chronic: irritation, sensitization and
dermatitis.
effects of overexposure: irritation, sensitization, and dermatitis
medical cond aggravated by exposure: allergy, eczema, or skin
conditions.
First aid: eyes: immediately flush eyes with water for at least 15
minutes. call a physician. skin: promptly wash with mild soap and
water. ingestion: if conscious, give large quantities of water.
get medica l attention. inhalation: remove to fresh air. give
oxygen if breathin is difficult. other: promptly remove wet
contaminated non-impervious clothing. wash before reuse.
Decomp temp: =204.4c, 400.F
decomp text: 400f
vapor pres: < 1mm hg @ 20'c
vapor density: >air
spec gravity: 0.96
viscosity: 2-3 poises
evaporation rate & reference:
solubility in water: insoluble
appearance and odor: a= metal colored liquid; b= amber liquid/ amines
Stability indicator/materials to avoid: yes
strong acids, bases, and mercaptans in bulk. avoid strong oxidizing
agents.
stability condition to avoid: avoid strong acids, bases, and mercaptans
in bulk. avoid elevated temperatures.
hazardous decomposition products: carbone monoxide, carbon dioxide,
aldehydes.
conditions to avoid polymerization: hazardous polymerization: may
occur. avoid materials listed for incompatibility.
Waste disposal methods: incinerate in furnace or bury in landfill in
accordance with federal, state or local regulations.
Ingred name: 1,2-ethanediamine, n-(2-aminoethyl)-, polymer with
(chloromethyl)oxirane and 4,4'-(1-methylethylidene)bis.(.Phenol.).
cas: 31326-29-1
= wt: 100.
Routes of entry: inhalation: unknown skin: yes ingestion: yes
health hazards acute and chronic: irritation, sensitization and
dermatitis.
effects of overexposure: irritation, sensitization, and dermatitis
medical cond aggravated by exposure: allergy, eczema, or skin
conditions.
First aid: eyes: immediately flush eyes with water for at least 15
minutes. call a physician. skin: promptly wash with mild soap and
water. ingestion: if conscious, give large quantities of water.
get medica l attention. inhalation: remove to fresh air. give
oxygen if breathin is difficult. other: promptly remove wet
contaminated non-impervious clothing. wash before reuse.
Decomp temp: =204.4c, 400.F
decomp text: 400f
vapor pres: < 1mm hg @ 20'c
vapor density: >air
spec gravity: 1.92
viscosity: 2-3 poises
evaporation rate & reference:
solubility in water: insoluble
appearance and odor: a= metal colored liquid; b= amber liquid/ amines
Stability indicator/materials to avoid: yes
strong acids, bases, and mercaptans in bulk. avoid strong oxidizing
agents.
stability condition to avoid: avoid strong acids, bases, and mercaptans
in bulk. avoid elevated temperatures.
hazardous decomposition products: carbone monoxide, carbon dioxide,
aldehydes.
conditions to avoid polymerization: hazardous polymerization: may
occur. avoid materials listed for incompatibility.
Waste disposal methods: incinerate in furnace or bury in landfill in
accordance with federal, state or local regulations.
Ingred name: 1,2-ethanediamine, n-(2-aminoethyl)-, polymer with
(chloromethyl)oxirane and 4,4'-(1-methylethylidene)bis.(.Phenol.).
cas: 31326-29-1
< wt: 40.
Ld50 lc50 mixture: none
health hazards acute and chronic: skin contact, skin absorption, eye
contact. Skin sensitizer and skin irrtation.
effects of overexposure: skin and eye irritation. Irritation,
sensitization and dermatitis.
medical cond aggravated by exposure: skin and eye conditions.
First aid: inhalation: if symptoms are experienced. Remove source of
contamination and/or move victim to fresh air.If recovery is
delayed or there are signs of distress obtain medical attention
immediately.Eye c ontact: flush eyes with water for 15 minutes.
seek medical advice if any irritation persists.Skin contact:
immediately remove excess with a clean cloth and wash skin
thoroughly with soap and water. I ngestion: if swallowed, do not
induce vomiting. Rinse mouth with water and drink plenty of water.
call tampa bay regional poison center at 1-800-282-3171 and/or seek
medical advice.
Boiling pt: b.P. Text: none
melt/freeze pt: m.P/f.P text: none
decomp temp: decomp text: none
spec gravity: 2.80
solubility in water: negligible (
appearance and odor: dark gray paste with epoxy/odor.
Stability indicator/materials to avoid: yes
strong oxidizing agents, acids, bases and amines.
stability condition to avoid: none
hazardous decomposition products: gaseous combinations of carbon,
hydrogen and oxygen may occur at elevated temperatures (200 c ).
conditions to avoid polymerization: will not occur when stored and used
as directed.
Waste disposal methods: dispose of in accordance with local, state and
federal regulations.
Ingred name: dgeba-epoxy resin
cas: 25068-38-6
code: f
rtecs #: ce6880000
minumum % wt: 10.
maxumum % wt: 30.
ingred name: dgebf-epoxy resin
cas: 28064-14-4
code: f
minumum % wt: 10.
maxumum % wt: 30.
ingred name: modified silica
cas: 67762-90-7
code: f
minumum % wt: 1.
maxumum % wt: 5.
ingred name: talc
cas: 14807-96-6
rtecs #: ww2710000
minumum % wt: 1.
maxumum % wt: 5.
osha pel: see table z-3
acgih tlv: 2 mg/m3
Health hazards acute and chronic: acute: causes burns to skin and eyes.
chronic: chemical burns and sensitization.
effects of overexposure: causes burns to skin and eyes. Chemical burns
and sensitization.
medical cond aggravated by exposure: skin and eye conditions.
First aid: inhalation: if symptoms are experienced. Remove source of
contamination and/or move victim to fresh air. Eye contact: flush
eyes with water for 15 minutes. Seek medical advice. Skin contact:
immediate ly remove excess with a clean cloth and wash skin
thoroughly with soap and water. Ingestion: if swallowed, do not
induce vomiting. Rinse mouth with water every 10 min for 30 min and
drink plenty of w ater.
Boiling pt: >175.C, 347.F
vapor pres: 0.22 mmhg @ 25 c
vapor density: heavier
spec gravity: 1.66
solubility in water: slight (o.1-1.0%)
appearance and odor: light gray paste with ammonical odor
Stability indicator/materials to avoid: yes
strong oxidizing agents, acids, epoxy resins and isocyanates.
hazardous decomposition products: gaseous combinations of carbon,
hydrogen and oxygen may occur at elevated temperatures.
conditions to avoid polymerization: will not occur
Waste disposal methods: dispose of in accordance with local, state and
federal regulations.
Ingred name: tris-dimethylamino-methyl phenol
cas: 90-72-2
code: f
rtecs #: sn3500000
minumum % wt: 1.
maxumum % wt: 5.
ingred name: diethylenetriamine
cas: 111-40-0
rtecs #: ie1225000
minumum % wt: 5.
maxumum % wt: 10.
acgih tlv: 4.2 mg/m3;1 ppm
ingred name: talc
cas: 14807-96-6
rtecs #: ww2710000
minumum % wt: 40.
maxumum % wt: 70.
osha pel: see table z-3
acgih tlv: 2 mg/m3
ingred name: titanium dioxide
cas: 13463-67-7
rtecs #: xr2275000
minumum % wt: 1.
maxumum % wt: 5.
osha pel: 15 mg/m3
acgih tlv: 10 mg/m3
ingred name: phenol
cas: 108-95-2
rtecs #: sj3325000
minumum % wt: 1.
maxumum % wt: 5.
osha pel: 19 mg/m3;5 ppm
acgih tlv: 19 mg/m3;5 ppm
epa rpt qty: 1000 lbs
dot rpt qty: 1000 lbs