Secure Ordering: +1 (757) 528-8028
NationalStockNumber.info
NationalStockNumber.INFO

Worldwide distributor of NSN parts and consumables located in the USA.

Sealing Compound

NSN: 8030-00-753-4597 | Model: AMS-S-8802

A chemical composition formulated for coating or for filling voids, cracks, joints or seams of objects and/or materials to exclude foreign matter and/or prevent the transmission of fluids therethrough. It is not designed to act as a primer coating or to be sanded or ground after application. It cannot be wiped off. For items which are specifically compounded to provide electrical insulating characteristics, use insulating compound, electrical. Excludes caulking compound; gasket cement; corrosion preventive compound; cement, iron and steel; plumbing fixture setting compound; preservative coating, rubber and textile treating compounds.

NSN Properties and Flags
NATO Stock Number
8030-00-753-4597
DEMIL
NO
Physical Form
Paste
Quantity Within Each Unit Package
0.500 pints
Specific Usage Design
For aircraft integral fuel tanks and fuel cell cavities
Features Provided
Separate catalyst
Rated Drying Time
10.000 hours
Special Features
Service temperature range of minus 65 degrees f to plus 250 degrees f; for extrusion gun and spatula application; polysulfide; 1/2 hour working time
Material
Rubber synthetic
Supplementary Features
6 fluid ounce base and required amount of curing agent in separate containers
Specification Data
81343-ams-s-8802 professional/industrial association standard
Nondefinitive Specification/std Data
2 type and b-1/2 class
Recent Solicitations
Solicitation Return by Date Buyer Code Quantity
SPE8E515T7550 2015-05-26 PEPCF 1011 KT

Inventory Check

The last inventory check on this NSN was done on 04/19/2024. Due to rapid changes in inventory this may not be the current stock qty.

  • New: 493
  • Serviceable: 3
  • As Removed: 2
  • New Surplus: 4

Pricing and Availability

Send us a request for quote using the form below. Our team will contact you with an up to date pricing and availability quote ASAP.

Qty:
Email Address:
Phone Number:
Your name:
Company:
Privacy    Terms

Certified Quality Assurance  Quality check icon

  •   ISO 9001:2015 + AS9120B
  •   Counterfeit Parts Prevention
  •   100% Product Inspections
  •   7 Year Record Retention
  •   On Time Delivery
  •   HAZMAT Certified
  •   Worldwide Shipping

NSN 8030-00-753-4597 Datasheet

Supply Class (FSC):
Preservative And Sealing Compounds
Cross Reference:
  • AMS-S-8802
  • PR-1440 B-1/2
  • WS-8020 B-1/2
  • MC-236 B-1/2
  • CS3204 B-1/2
  • AC-236 B-1/2
  • AMS-S-8802 TY2CLB-1/2
  • PR-1422 B-1/2
  • P/S 890 B-1/2
  • AC 236-B-1/2
  • PR-1821
  • EC-801
  • MIL-S-8802 TY2CLB-1/2
  • MIL-S-8802
  • AMS-S-8802
  • PR-1440 B-1/2
  • CS3204 B-1/2
  • AC-236 B-1/2
  • WS-8020 B-1/2
  • P/S 890 B-1/2
  • AMS-S-8802 TY2CLB-1/2
  • AC 236-B-1/2
  • MIL-S-8802
  • MIL-S-8802 TY2CLB-1/2
  • AMS-S-8802
  • PR-1440 B-1/2
  • WS-8020 B-1/2
  • CS3204 B-1/2
  • AC-236 B-1/2
  • AMS-S-8802 TY2CLB-1/2
  • P/S 890 B-1/2
  • AC 236-B-1/2
  • MIL-S-8802
  • MIL-S-8802 TY2CLB-1/2
  • AMS-S-8802
  • PR-1440 B-1/2
  • WS-8020 B-1/2
  • CS3204 B-1/2
  • AC-236 B-1/2
  • AMS-S-8802 TY2CLB-1/2
  • P/S 890 B-1/2
  • AC 236-B-1/2
  • MIL-S-8802
  • MIL-S-8802 TY2CLB-1/2
  • AMS-S-8802
  • PR-1440 B-1/2
  • WS-8020 B-1/2
  • CS3204 B-1/2
  • AC-236 B-1/2
  • AMS-S-8802 TY2CLB-1/2
  • P/S 890 B-1/2
  • AC 236-B-1/2
  • MIL-S-8802
  • MIL-S-8802 TY2CLB-1/2
  • AMS-S-8802
  • PR-1440 B-1/2
  • CS3204 B-1/2
  • AC-236 B-1/2
  • WS-8020 B-1/2
  • AMS-S-8802 TY2CLB-1/2
  • P/S 890 B-1/2
  • AC 236-B-1/2
  • MIL-S-8802
  • MIL-S-8802 TY2CLB-1/2
  • AMS-S-8802
  • PR-1440 B-1/2
  • CS3204 B-1/2
  • AC-236 B-1/2
  • WS-8020 B-1/2
  • AMS-S-8802 TY2CLB-1/2
  • P/S 890 B-1/2
  • AC 236-B-1/2
  • MIL-S-8802
  • MIL-S-8802 TY2CLB-1/2
Cage Codes:
  • Society Of Automotive Engineers Inc (CAGE 81343)
  • Desoto International, Inc. Prc (CAGE 83574)
  • Royal Adhesives & Sealants Llc (CAGE 4YBA4)
  • Morton Intl Inc (CAGE 0U317)
  • Flamemaster Corporation, The (CAGE 14439)
  • 3m Company (CAGE 1DWR5)
  • Chemetall Rockwood Gmbh (CAGE D1940)
  • 3m Company (CAGE 04963)
  • General Services Administration (CAGE 80244)
  • Military Specifications (CAGE 81349)
Replacements:
  • 8030-00-753-4597 replaces 8030-00-286-2268
  • 8030-00-753-4597 replaces 8030-00-497-4709
Schedule B & Trade:
  • Schedule B: 3214100010 (NAICS 325520)

    Caulking compounds

  • SITC: 53354

    Glaziers' putty; grafting putty; resin cement, caulking compounds and other mastics; painters' fillings; nonrefractory surfacing preparations

  • End Use: 13210

    Shingles, molding, wallboard

Identification:
HMIC

Y - Indicates information is in the hazardous materials information resource system (hmirs).

PMIC

A - Item does not contain precious metal.

CRITL

- The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.

Freight Information:
  • NMFC:

    149610 - Caulking/glaziers compounds noi

  • WCC:

    620 - Paint, in individual containers less than 10 cubic ft

  • SHC:

    9 - Other or no special handling required (sh)

  • ADC:

    A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

  • ACC:

    B - Construction materials: includes paint and related materials, prefabricated building, wood products, metal and composition mater

  • LTL:

    T - 55.0

  • TCC:

    Z - No special type of cargo code applicable

NSN Management Codes:
  • SOS
    Gsa
  • AAC
    J
  • Quantity per pack
    48
  • Unit of Measure
    Kt
  • Shelf Life
    9 mo.
  • Classification Control
    U
  • MGMT_CTL
    J2200x-
  • Repariability
    This is a nonreparable item. if condemned or economically unserviceable, then dispose at the level authorized replace the item.

Questions & Answers:

What are the historical prices recorded for this stock number?
Historical data shows pricing from $48.88 to $81.47..
Does NSN 8030-00-753-4597 have a shelf life?
No. There is no shelf life applicable for this NSN.
What NATO entities are users of this NSN?
Department Of The Army, Department Of The Air Force, Defense Threat Reduction Agency, Department Of The Navy, Federal Aviation Administration, General Services Administration, Austria, Brazil, Spain, Malaysia, Canada, New Zealand, Germany, Republic Of Korea, United Kingdom, Italy, Greece, Turkey, and Nato Maintenance and Supply Agency
What is the NIIN of NSN 8030-00-753-4597?
007534597 or 00-753-4597
Does NSN 8030-00-753-4597 require demilitarization?
Yes - ITAR Controlled
What is the most recent solicitation for NSN 8030-00-753-4597?
Solicitation SPE8E515T7550 for qty 1011 on 05/14/2015
When was this national stock number assigned to the federal catalog?
Jan 01, 1962
MSDS

Material Safety

MSDS BFMZD GC-408,CL B

Hazards

Effects of overexposure: may cause skin or eye irritation upon contact

First Aid

First aid: wash hands thoroughly flush eyes copiously w/water. Give
emetic if ingested.

Chemical Properties

Hcc: n1
spec gravity: 1.5
solubility in water: negligible
appearance and odor: off white to gray semi-solid

Reactivity

Stability indicator/materials to avoid: yes
strong bases & oxidizing agents
stability condition to avoid: store below 80f

Proper Disposal

Waste disposal methods: dispose iaw fed., state & local codes.

disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.

Ingredients List

Ingred name: polysulfide
fraction by wt: 70%

ingred name: calcium carbonate (marble) (limestone)
cas: 1317-65-3
rtecs #: ev9580000
fraction by wt: 25%
osha pel: 15 mg/m3 tdust
acgih tlv: 10 mg/m3 tdust; 9192

ingred name: manganese dioxide (as manganese)
cas: 1313-13-9
rtecs #: op0350000
osha pel: c,5 mg/m3/1 fume twa
acgih tlv: 5 mg/m3 dust/1 fume

ingred name: thiram (sara iii)
cas: 137-26-8
rtecs #: jo1400000
fraction by wt:
osha pel: 5 mg/m3
acgih tlv: 1 mg/m3; 9192
epa rpt qty: 10 lbs
dot rpt qty: 10 lbs

MSDS BFMZF EC-801,INDUSTRIAL SEALANT,B-1/2

Hazards

Effects of
overexposure: eye: irrit.Skin: defatting/dermatitis.Vapors: headache,na
usea & vomiting.

First Aid

First aid: eye: flush with water 15 min,call physician.Skin: wash with
soap and water.Inhalation: remove to fresh air.

Chemical Properties

Hcc: f4
spec gravity: 1.36
solubility in water: slight
appearance and odor: black,sulfur odor
percent volatiles by volume: 3

Reactivity

Stability indicator/materials to avoid: yes
hazardous decomposition products: co,co2,sulfur compounds

Proper Disposal

Waste disposal methods: may be disposed of in a sanitary landfill
according to local regulations.

disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.

Ingredients List

Ingred name: carbon black
cas: 1333-86-4
rtecs #: ff5800000
osha pel: 3.5 mg/m3
acgih tlv: 3.5 mg/m3; 9192

ingred name: polysulfide rubber

ingred name: phenolic resin

ingred name: petroleum base solvent
fraction by wt: 3%

ingred name: magnesium acetate
cas: 142-72-3
rtecs #: ai5600000

MSDS BFMZG EC-801A,ACCELERATOR,CL A&B

Hazards

Effects of overexposure: eye: irritation. Skin: irritation. Prolonged
contact may pod systemic problems from absorption.

First Aid

First aid: eye: flush with water 15 min,call a physician.Skin: wash with
soap and water. Launder contaminated clothing before re use.

Chemical Properties

Hcc: f4
boiling pt: b.P. Text: >600f/315c
vapor pres:
spec gravity: 2.8
solubility in water: negligible
appearance and odor: brown paste - slight odor

Reactivity

Stability indicator/materials to avoid: yes
contact with reducing agents.

hazardous decomposition products: co,co2, & smoke particals.

Proper Disposal

Waste disposal methods: dispose in a secure landfill at a hazardous
waste management facility. Epa hazardous waste number d-008. Comply
with local,state and federal regulations.

disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.

Ingredients List

Ingred name: lead peroxide (lead dioxide), (osha pel from 29cfr
1910.1025)
cas: 1309-60-0
rtecs #: og0700000
fraction by wt:
osha pel: 0.05 mg/m3 (pb)
acgih tlv: 0.15 mg/m3(pb); 8990

ingred name: fatty acid bodying agent

ingred name: terphenyl plasticizer

MSDS BFMZH PR-1422 CLASS B

Hazards

Effects of overexposure: possible skin irritant.May cause temporary
discomfort to eyes.

First Aid

First aid: skin: wash thoroughly w/soap & water. Eyes: wash out
thoroughly w/lg amt of water, see physcian.Inhalation: remove to
fresh air.

Chemical Properties

Hcc: n1
spec gravity: 1.38
solubility in water: negligible
appearance and odor: light brown;no significant odor.

Reactivity

Stability indicator/materials to avoid: yes
oxidizing,corrosive matl. Can react w reducing materials.

stability condition to avoid: source of ignition
hazardous decomposition products: oxides of sulfur;hydrogen
sulfide;formic acid

Proper Disposal

Waste disposal methods: do not incinerate.Dispose of locally iaw
existing regulations or ship in tightly closed containers to posted
landfill in accordance with local,state & fed regs for disposal.

disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.

Ingredients List

Ingred name: calcium dichromate
cas: 14307-33-6
rtecs #: hx7630000
fraction by wt: 5.0%
osha pel: c, 0.1 mg/m3 (cro3)
acgih tlv: 0.05 mg/m3 (cr);8990

ingred name: dimethyl acetamide
cas: 127-19-5
rtecs #: ab7700000
fraction by wt: 4.0%
osha pel: s, 10 ppm
acgih tlv: s, 10 ppm; 9192

ingred name: toluene (sara iii)
cas: 108-88-3
rtecs #: xs5250000
fraction by wt:
osha pel: 200 ppm/150 stel
acgih tlv: 50 ppm; 9293
epa rpt qty: 1000 lbs
dot rpt qty: 1000 lbs

ingred name: mixed resins
fraction by wt: 5.0%
acgih tlv: unk

ingred name: polysulfide polymer
fraction by wt: 60.0%
acgih tlv: unk

MSDS BHFZN PR-1440 CLASS B,PART B - POLYSULFIDE RUBBER

Hazards

Routes of entry: inhalation: no skin: yes ingestion: yes
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: product may be irritating and may
cause liver and/or kidney damage. It also may sensitize allergic
reactions.

explanation of carcinogenicity: mfr claims no compound in this product
is listed by iarc, ntp, or osha as a carcinogen.

effects of overexposure: eye: irritation,burning. Skin: irritation. May
cause skin rash in sensitized individuals. Inhaled: respiratory
irritation. Ingested: nausea,vomiting,g/i pain & distress, and
possible liver and/or kidney d amage.

medical cond aggravated by exposure: sensitized people are at increased
risk when using this product.

First Aid

First aid: eye: flush with water 15 min. Skin: remove contaminated
clothing. Wash with soap & water. Launder clothing before reuse.

inhaled: remove to fresh air. Restore breathing. Get medical care.

ingested: do not induce vomiting. Give two glasses of water and get
immediate medical attention. (give nothing by mouth if unconscious)
- if any irritation is severe or persists, get medical care.

Chemical Properties

Hcc: v4
spec gravity: 1.60
solubility in water: negligible
appearance and odor: not described on msds by mfr
percent volatiles by volume: 0

Reactivity

Stability indicator/materials to avoid: yes
strong oxidizing agents
stability condition to avoid: high temperatures, sparks, and open flames
hazardous decomposition products: carbon monoxide, carbon dioxide,
sulfur dioxide, hydrogen sulfide, possible formaldehyde.

Proper Disposal

Waste disposal methods: dispose i/a/w federal,state,local regulations.

mfr states that product may be disposed as ordinary refuse.

disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.

Ingredients List

Ingred name: phenol formaldehyde resin
cas: 9003-35-4

MSDS BHQLN PR-1440 ALL CLASSES AND TYPES PART A

Hazards

Routes of entry: inhalation: yes skin: yes ingestion: yes
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: eye irritation; skin irritation;
inhal: although the main hazard of manganese compounds is by
breathing dust, ingestion should be avoided as a precaution against
manganese poisoning. Symptoms of manga nese poisoning are weakness
and sleepiness.

explanation of carcinogenicity: nothing contained in this product is
found to be carcinogen-ity.

effects of overexposure: eye irritation; skin irritation; inhal:
although the main hazard of manganese compounds is by breathing
dust, ingestion should be avoided as a precaution against manganese
poisoning. Symptoms of manga nese poisoning are weakness and
sleepiness.

First Aid

First aid: eye: flush w/lukewarm water for 15 min, if symptoms persist
consult a physician skin: wash with soap and water, if symptoms
persist consult a physician inhal: remove to fresh air, if symptoms
are pres ent consult a physician ingst: consult a physician

Chemical Properties

Hcc: v4
boiling pt: b.P. Text: na
vapor pres: na
vapor density: na
spec gravity: 1.95
solubility in water: negligible

Reactivity

Stability indicator/materials to avoid: yes
easily oxidizable materials
hazardous decomposition products: oxides of carbon and nitrogen,
manganese compounds

Proper Disposal

Waste disposal methods: not a hazardous waste according to epa
regulationsconsult state regulations prior to disposal of spillage.

disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.

Ingredients List

Ingred name: manganese dioxide
cas: 1313-13-9
rtecs #: op0350000
fraction by wt: 60%
acgih tlv: 5 mg/m3

ingred name: 1,3-diphenyl guanadine
cas: 102-06-7
rtecs #: mf0875000
fraction by wt:
osha pel: ne
acgih tlv: ne

MSDS BHQLP PR-1440 CLASS B, PART B

Hazards

Routes of entry: inhalation: yes skin: yes ingestion: yes
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: may cause allergic skin rash in
sensitized individuals. Prolonged exposure can cause liver and
kidney damage. Ingestion may cause liver and kidney damage.

effects of overexposure: eye: irritation; skin: local irritation; inhal:
prolonged exposure above tlv canproduce anesthesia, headache,
dizziness, nausea, and respiratory irritation. Ingst: may cause
nausea, vomiting, liver an d kidney damage.

medical cond aggravated by exposure: may cause allergic skin rash in
sensitized individuals.

First Aid

First aid: eye: flush w/luke warm water for 15 mins,if symptoms persist
consult a physicianskin: wash with soap & water, if symptoms
persist consult a physician inhal: remove to fresh air, if symptoms
are presen t consult a physician ingst: consult a physician

Chemical Properties

Hcc: v4
vapor density: 3.2
spec gravity: 1.49
evaporation rate & reference: 2.6 (toluene)
solubility in water: negligible

Reactivity

Stability indicator/materials to avoid: yes
strong oxidizers
hazardous decomposition products: oxides of carbon, so2, traces of h2s

Proper Disposal

Waste disposal methods: not a hazardous waste according to epa
regulationsconsult state regulations prior to disposal of spillage.

disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.

Ingredients List

Ingred name: toluene (sara iii)
cas: 108-88-3
rtecs #: xs5250000
fraction by wt:
osha pel: 200 ppm/150 stel
acgih tlv: 50 ppm; 9293
epa rpt qty: 1000 lbs
dot rpt qty: 1000 lbs

ingred name: phenolic formaldehyde resin
cas: 9003-35-4
fraction by wt:

ingred name: voc. Organic cmpd 57.81 g/l (mixed)
rtecs #: 9999999vo

MSDS BNKLH CS 3204 TYPE II CLASS B PART A

Hazards

Routes of entry: inhalation: no skin: yes ingestion: no
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: eyes: irritation. Skin: irritation,
dermatitis.

explanation of carcinogenicity: none
effects of overexposure: eyes: irritation. Skin: irritation, dermatitis.

First Aid

First aid: eyes: flush w/large amounts of water. Skin: wash w/soap &
water. Ingestion: don't induce vomiting.

Chemical Properties

Hcc: n1
vapor pres: nil
vapor density: nil
spec gravity: 1.52
ph: 8.5
evaporation rate & reference: nil
solubility in water: negligible
appearance and odor: white paste, polysulfide odor.

percent volatiles by volume: 3.0%

Reactivity

Stability indicator/materials to avoid: yes
strong oxidizing agents & strong acids
stability condition to avoid: open flame
hazardous decomposition products: water, co, co2, sulfur dioxide, smoke

Proper Disposal

Waste disposal methods: react w/curing agent & dispose as solid waste
per federal, state & local regulations. Incineration/landfill.

dispose as non hazardous waste.

disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.

Ingredients List

Ingred name: vol organic cmpd: grams/liter
rtecs #: 9999999vo

ingred name: thiol terminated polyether, polydithioeter (or liq.

polysulfide polymer)
cas: 68611-50-7

MSDS BNKLJ FOR CLASS B CS 3204 PART B

Hazards

Routes of entry: inhalation: yes skin: yes ingestion: no
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: skin: sluggishness, sleeplessness,
weakness in the legs. Inhalation: impairment of central nervous
system.

explanation of carcinogenicity: none
effects of overexposure: skin: sluggishness, sleeplessness, weakness in
the legs. Inhalation: impairment of central nervous system.

First Aid

First aid: eyes: flush w/large amounts of water. Skin: wash w/soap &
water. Obtain medical attention.

Chemical Properties

Spec gravity: 2.0
evaporation rate & reference: nil
solubility in water: negligible
appearance and odor: black paste, oily odor.

Reactivity

Stability indicator/materials to avoid: yes
reducing agents & combustibles, water, potassium azide.

stability condition to avoid: none
hazardous decomposition products: co2, cobalt, nobelium, nitrogen
oxides, dust

Proper Disposal

Waste disposal methods: react w/base component & dispose as solid waste
according to federal, state & local regulations.

disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.

Ingredients List

Ingred name: manganese dioxide
cas: 1313-13-9
rtecs #: op0350000
fraction by wt: 65%
osha pel: 5 mg/cum
acgih tlv: 5 mg/cum (mn)

MSDS BRGXK THIOKOL MC-236 BASE

Hazards

Reports of carcinogenicity: ntp: no iarc: yes osha: no
health hazards acute and chronic: acute: eye: mechanical irritation.

ingestion: can cause nausea, vomiting, & gastrointestinal upset.

depending on route, frequency, duration of exposure, toxicity may
effect in following organs or syst ems: respiratory system, immune
system.Inhalation: pneumoconiosis.

explanation of carcinogenicity: epidemiological studies indicate lung
cancer more prevalent among individuals affected w/silicosis than
general public.

effects of overexposure: chronic: skin: irritation following prolonged
or repeated contact. Inhalation: can affect respiratory function.

silicosis (fibrotic condition caused by deposition of silicon
dioxide particles. Cough, wheezing, chest pain, & progressive
impairment of pulmonary function characterize a silicotic
condition).

medical cond aggravated by exposure: exposure to this product is not
expected to contribute to, worsen, or aggravate any existing
medical conditions.

First Aid

First aid: eye: flush w/water 15 min. If irrit,see dr. Skin: remove contam
cloth/shoes. Wash area w/soap & water. If irrit,see dr. Wash contam
cloth before reuse. Inhal: remove to fresh air. If symptom,get immed
me d aid. If no breath,give artif resp (mouth to mouth). Ingest: get
med aid. Induce vomit (ipecac/finger in throat). Give nothing by
mouth to unconscious. Note to dr: prevent absorptn. Treat symptoms.

Chemical Properties

Hcc: n1
spec gravity: 1.61
viscosity: 67 - 77 ku
solubility in water: insoluble
percent volatiles by volume: 3

Reactivity

Stability indicator/materials to avoid: yes
hazardous decomposition products: phenolics, oxides of nitrogen, oxides
of sulfur, smoke, soot, toxic (co2, co), hydrogen sulfide

Proper Disposal

Waste disposal methods: follow federal, state & local regulations.

contact governmental environmental agencies if guidance req'd.

1)recycle/rework if feasible. 2)incinerate at authorized facility.

3)treat at waste treatment facility.

disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.

Ingredients List

Ingred name: limestone/calcium carbonate
cas: 471-34-1
rtecs #: ff9335000
fraction by wt: 30-60%
other rec limits: none specified
osha pel: 5 mg/m3 (resp fract)
acgih tlv: 10 mg/m3 (total)

ingred name: titanium dioxide (pigment)
cas: 13463-67-7
rtecs #: xr2275000
fraction by wt: 1-5%
other rec limits: none specified
osha pel: 15 mg/m3 tdust
acgih tlv: 10 mg/m3 tdust; 9293

ingred name: quartz (crystalline silica)
cas: 14808-60-7
rtecs #: vv7330000
fraction by wt: 0.36%
other rec limits: none specified
osha pel: see table z3
acgih tlv: 0.1 mg/m3 rdust;9293

MSDS BRGXL THIOKIL MC-236

Hazards

Routes of entry: inhalation: yes skin: yes ingestion: yes
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: eye: irrit. Skin: reactions in some
individuals. Inhalation: dizziness, headache, incoordination.

ingeston: gi irrit, nausea, vomiting, gi upset. Skin: redness,
pain, irrit, blisters, burns. Ingestion : abdom pain, fever, liver
& kidney damage, diarrhea, mouth, throat, digest tract burns.

medical cond aggravated by exposure: some of components in product may
aggravate existing medical conditions involving: liver, kidney,
skin, immune system and/or specific chemical allergies.

First Aid

First aid: eye: flush w/water 15 min. If irrit, see dr. Skin: remove
contam clothing/shoes. Wash area w/soap & water. If irrit, see dr.

wash contam clothing before reuse. Inhal: move to fresh air. If
symptoms, g et immed med aid. If not breathing, give artif resp.

ingest: get med aid. Induce vomit (ipecac/finger down throat). Give
nothing by mouth to unconscious. Note to dr: prevent absorptn.

treat symptoms.

Chemical Properties

Hcc: n1
vapor pres: 0.1
spec gravity: 2.1
viscosity: 67 - 77 ku
evaporation rate & reference:
solubility in water: slightly soluble

Reactivity

Stability indicator/materials to avoid: yes
oxidizing agents, chemically active metals (e.G., nickel, cobalt, iron,
copper).

hazardous decomposition products: amines, oxides of nitrogen, smoke,
soot, toxic fumes (co, co2), metal oxides.

Proper Disposal

Waste disposal methods: follow federal, state & local regulations.

contact governmental environmental agencies if further info req'd.

1)recycle or rework. 2)incinerate. 3)treat at waste treatment
facility.

disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.

Ingredients List

Ingred name: manganese dioxide (oral rat ld50: >10,000 mg/kg)
cas: 1313-13-9
rtecs #: op0350000
fraction by wt: 60-70%
other rec limits: none specified
acgih tlv: 1 mg/m3/stel 3 mg/m3

ingred name: terphenyl, hydrogenated (oral rat ld50: >10,000 mg/kg;
dermal rabbit ld50: >2,000 mg/kg)
cas: 61788-32-7
rtecs #: wz6535000
fraction by wt: 10-30%
other rec limits: * ceiling
osha pel: 0.5 mg/m3, 5 mg/m3
acgih tlv: 0.5 ppm, 4.7 mg/m3 *

ingred name: terphenyls (oral rat ld50: 13,200 mg/kg)
cas: 26140-60-3
rtecs #: wz6450000
fraction by wt: 1-5%
other rec limits: none specified
osha pel: c 1.0 ppm
acgih tlv: c 0.53 ppm; 9394

ingred name: ethoxylated nonylphenol phosphate (oral rat ld50: 3630
mg/kg)
cas: 51811-79-1
fraction by wt: 1-5%
other rec limits: none specified

ingred name: diphenylguanidine 1,3- (oral rat ld50 507 mg/kg; oral
mouse ld50: 290 mg/kg)
cas: 102-06-7
rtecs #: mf0875000
fraction by wt: 1-5%
other rec limits: none specified

ingred name: sodium hydroxide (sara iii)
cas: 1310-73-2
rtecs #: wb4900000
fraction by wt: 1-5%
other rec limits: none specified
osha pel: 2 mg/m3
acgih tlv: c 2 mg/m3; 9293
epa rpt qty: 1000 lbs
dot rpt qty: 1000 lbs

MSDS BRKGY CS 3204, PART B

Hazards

Routes of entry: inhalation: yes skin: no ingestion: no
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: impairment of central nervous system.

effects of overexposure: sluggishness, sleeplessness and/or weakness in
the legs, when excessive inhalation exposure to dust occurs. Target
organs: central nervous system, blood, kidneys.

medical cond aggravated by exposure: none known

First Aid

First aid: eyes: flush with large amounts of water, contact physician.

skin: wash with soap and water.

Chemical Properties

Hcc: n1
melt/freeze pt: m.P/f.P text: liq@rm temp
spec gravity: 2.0 (water=1)
ph: 9.0
viscosity: 1000 poises
evaporation rate & reference: nil
solubility in water: negligible
appearance and odor: black paste, oily odor
percent volatiles by volume: 2.0

Reactivity

Stability indicator/materials to avoid: yes
reducing agents and combustible, h2s, potassium azide
stability condition to avoid: none
hazardous decomposition products: co2, co, no, no2, dust

Proper Disposal

Waste disposal methods: react with base component and dispose as solid
waste according to federal, state and local regulations.

disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.

Ingredients List

Ingred name: manganese dioxide (dust) (exposure limits based on dust
particles. In manganese dioxide particles are wetted out)
cas: 1313-13-9
rtecs #: op0350000
fraction by wt: 65%
other rec limits: none specified
osha pel: 5 mg/m3
acgih tlv: 5 mg/m3

ingred name: voc: 1 gram/liter
rtecs #: 9999999vo
other rec limits: none specified

MSDS BSGFN THIOKOL MC-236 BASE

Hazards

Routes of entry: inhalation: no skin: yes ingestion: yes
reports of carcinogenicity: ntp: no iarc: yes osha: no
health hazards acute and chronic: eye: other than mechanical irritation,
no adverse effects expected. Skin: irritation can occur following
prolonged or repeated contact. Inhalation: under normal conditions
of use no adverse effects ex pected. Ingestion: can cause nausea,
vomiting, and gastrointestinal upset. *
explanation of carcinogenicity: crystalline silica: significant incidence
of adenocarcinomas & squamous cel carcinomas of lung was induce in
rats exposed
effects of overexposure: * depending on route, frequency & duration of
exposure toxicity may effect the following organs or systems.

respiratory system, immune system (e.G. Allergic reactions).

medical cond aggravated by exposure: exposure to this product is not
expected to contribute to, worsen, or aggravate any existing
medical conditions.

First Aid

First aid: eye: flush w/water 15 min.If irrit,see dr.Skin: remove contam
cloth & shoes.Wash contam skin w/soap & water.If irrit,see dr.Wash
contam cloth separately before reuse.Inhal: remove to fresh air.Get
immed med aid.If no breath,give artif resp (mouth to
mouth).Ingest: get med aid.Unless advised,induce vomit (ipecac w/2
glasses water/finger down throat).Nothing by mouth to
unconscious,drowsy,no gag reflex.

Chemical Properties

Hcc: n1
spec gravity: 1.61
viscosity: 9000-14000 p
solubility in water: insoluble
appearance and odor: light colored, off white paste, sulfide odor
percent volatiles by volume: 97

Reactivity

Stability indicator/materials to avoid: yes
none known
hazardous decomposition products: phenolics, oxides of nitrogen, oxides
of sulfur, smoke, soot, toxic fumes (co & co2), hydrogen sulfide.

Proper Disposal

Waste disposal methods: don't flush to sewer, stream, other water
bodies. If discarded in original unused form, manage at authorized
facility, in compliance w/fed, state & local regulations. Contact
governmental agencies for guidance. 1)recycle. 2)incinerate.

3)treat.

disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.

Ingredients List

Ingred name: limestone/calcium carbonate
cas: 471-34-1
rtecs #: ff9335000
fraction by wt: 30-60%
other rec limits: *15 mg/m3 total part
osha pel: 5 mg/m3 resp fractn*
acgih tlv: 10mg/m3 total partic

ingred name: titanium dioxide
cas: 13463-67-7
rtecs #: xr2275000
fraction by wt: 1-5%
other rec limits: *15 mg/m3 total part
osha pel: 5 mg/m3 resp fractn*
acgih tlv: 10mg/m3 toatl partic

ingred name: quartz (crystalline silica)
cas: 14808-60-7
rtecs #: vv7330000
fraction by wt: 0.36%
other rec limits: none specified
osha pel: 0.1 mg/m3 resp fract
acgih tlv: 0.1 mg/m3 resp fract

MSDS BSGFP THIOKIL MC-236 ACCELERATOR

Hazards

Routes of entry: inhalation: yes skin: yes ingestion: yes
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: eye: mild to moderate irritation.

skin: irritation can occur following prolonged/repeated contact.

contact can cause hypersensitivity (allergic) reactions in
susceptible individuals. Inhalation: dizzi ness, headache,
incoordination. Ingestion: gastrointestinal irritation. Nausea,
vomiting, gastrointestinal upset.

effects of overexposure: depending on the route, frequency, and duration
of exposure toxicity may effect the following organs and/or
systems. Liver, kidney, eye, skin, immune system (allergic
reactions).

medical cond aggravated by exposure: some of the components in this
product may aggravate existing medical conditions. Liver, kidney,
skin, immune system and/or specific chemical allergies.

First Aid

First aid: eye: flush w/water 15 min. If irritation, see dr. Skin:
remove contam clothes & shoes. Wash contam skin w/soap & water. If
irrit, see dr. Inhal: remove to fresh air. If symptoms, get immed
med aid. If not breathing, give artif resp. Ingest: get med aid.

unless advised otherwise, induce vomiting (ipecac/finger down
throat). Give nothing by mouth if person is drowsy, unconscious,
has no gag reflex.

Chemical Properties

Hcc: n1
vapor pres: 0.1 @ 25 c
spec gravity: 2.1 (water=1)
viscosity: 100-500poises
evaporation rate & reference:
appearance and odor: black paste, phenyl odor

Reactivity

Stability indicator/materials to avoid: yes
oxidizing agents, chemically active metals (e.G., nickel, cobalt, iron,
copper)
hazardous decomposition products: amines, oxides of nitrogen, smoke,
soot, toxic fumes (e.G., carbon dioxide, & carbon monoxide), metal
oxides.

Proper Disposal

Waste disposal methods: if in unused original form, manage at authorized
facility in compliance with federal, state & local requirements. 1)
recycle/rework if feasible. 2) incinerate at authorized facility.

or 3) treat at ac ceptable waste treatment facility.

disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.

Ingredients List

Ingred name: manganese dioxide
cas: 1313-13-9
rtecs #: op0350000
fraction by wt: 60-70%
other rec limits: *1 mg/m3;stel 3mg/m3
osha pel: as mn fume: 3 mg/m3
acgih tlv: 5 mg/m3 resp fract *

ingred name: terphenyl, hydrogenated (ld50: oral-rat >10,000 mg/kg)
cas: 61788-32-7
fraction by wt: 10-30%
other rec limits: none specified
osha pel: ceiling 0.5 ppm
acgih tlv: 0.5 ppm, 4.7 mg/m3

ingred name: terphenyl (ld50: oral-rat 13,200 mg/kg)
cas: 26140-60-3
rtecs #: wz6450000
fraction by wt: 1-5%
other rec limits: none specified
osha pel: 0.5 ppm, 5 mg/m3
acgih tlv: 0.5 ppm, 4.7 mg/m3

ingred name: ethoxylated nonylphenol phosphate (ld50: oral-rat 3630
mg/kg)
cas: 51811-79-1
fraction by wt: 1-5%
other rec limits: none specified

ingred name: diphenylguanidine,1,3- (ld50: oral-rat 507 mg/kg)
cas: 102-06-7
rtecs #: mf0875000
fraction by wt: 1-5%
other rec limits: none specified

ingred name: sodium hydroxide (sara iii)
cas: 1310-73-2
rtecs #: wb4900000
fraction by wt: 1-5%
other rec limits: none specified
osha pel: ceiling 2 mg/m3
acgih tlv: 2 mg/m3
epa rpt qty: 1000 lbs
dot rpt qty: 1000 lbs

MSDS BVNCP PR-1440 B-1/2, BASE

Hazards

Routes of entry: inhalation: yes skin: yes ingestion: yes
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: eyes: may cause burning, tearing, &
reddening. Skin: prolonged exposure may cause drying & cracking of
skin & possible dermatitis. Inhalation: may cause dizziness,
drowsiness & fatigue. May cause live r & kidney damage. Ingestion:
may causedrowsiness, dizziness & nausea.

effects of overexposure: effects of long-term (chronic) exposure may
cause disturbances in memory, thinking ability, emotions and
coordination.

First Aid

First aid: eyes: flush with water. If symptoms persists, consult a
physician. Skin: wash with soap and water. If symptoms persist,
consult a physician. Inhalation: remove to fresh air. If symptoms
are present, c onsult a physician. Ingestion: drink large amounts
of water; induce vomiting; consult a physician.

Chemical Properties

Hcc: n1
boiling pt: b.P. Text: 230 to 350f
vapor density: > air
spec gravity: 1.571
viscosity: 10500p#7@2rpm
evaporation rate & reference: slower than n-bu ac
solubility in water: slight
appearance and odor: beige thixotropic paste
percent volatiles by volume: 3.3

Reactivity

Stability indicator/materials to avoid: yes
none known
stability condition to avoid: not known
hazardous decomposition products: oxides of carbon, sulfur dioxide,
traces of hydrogen sulfide

Proper Disposal

Waste disposal methods: not a hazardous waste according to epa
regulations. Consult state regulations prior to disposal of
spillage.

disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.

Ingredients List

Ingred name: titanium dioxide (listed as req'd by 29cfr 1910: 1200, fully
encapsulated, not hazardous under normal circumstances)
cas: 13463-67-7
rtecs #: xr2275000
fraction by wt: 3.140%
other rec limits: none recommended
osha pel: 10 mg/m3
acgih tlv: 10 mg/m3

ingred name: calcium carbonate (limestone) (listed as req'd bu 29cfr
1910: 1200,fully encapsulted,not hzdous under normal conditions)
cas: 1317-65-3
rtecs #: ev9580000
fraction by wt: 30.421%
other rec limits: none recommended
osha pel: 15.0 mg/m3
acgih tlv: 10.0 mg/m3

ingred name: toluene (sara iii) (vapor pressure 23 mm hg)
cas: 108-88-3
rtecs #: xs5250000
fraction by wt: 0.978%
other rec limits: none recommended
osha pel: 100 ppm;stel 150 ppm
acgih tlv: 50 ppm
epa rpt qty: 1000 lbs
dot rpt qty: 1000 lbs

ingred name: polysulfide polymer (non hazardous ingredient)
cas: 68611-50-7
other rec limits: none recommended

ingred name: silica derivatives (non hazardous ingredient)
cas: 67762-90-7
other rec limits: none recommended

ingred name: voc per epa method 24: 35 g/l (combined part a and b)
rtecs #: 9999999vo
other rec limits: none recommended

MSDS BYRRY THIOKOL MC-236 BASE TYPE II

Hazards

Health hazards acute and chronic: eyes: may cause mechanical
irritation.Skin: prolonged contact may cause irritation.Ingest: may
cause gi tract irritation.Inhal: no adverse effects
expected.Chronic: may cause allergic reaction.Exposure to
crystalline silica dust may cause silicosis.

explanation of carcinogenicity: crystalline
silica: ntp-ac,iarc-2a.Ethylene
oxide: ntp-ac,iarc-2a,epa-b2.Formaldehyde is lower than reportable
amount.

effects of overexposure: ingest: nausea,vomiting and gastrointestinal
upset.Silicosis: coughing,wheezing,chest pain.

medical cond aggravated by exposure: unlikely to aggrivate existing
medical conditions under normal conditions of use.

First Aid

First aid: skin: remove contaminated clothing;wash with soap and
water.See doctor if irritation develops.Eyes: flush with water for
15 minutes.See doctor if irritation develops.Inhal: remove to fresh
air.Give oxyge n or artificial respiration if needed.Ingest: get
prompt qualified medical attention.Induce vomiting with syrup of
ipecac,followed by 2 glasses water or stick finger down throat.

Chemical Properties

Hcc: n1
spec gravity: 1.61
viscosity: 9000-14000p
solubility in water: insoluble
appearance and odor: not reported.

percent volatiles by volume: 97

Reactivity

Stability indicator/materials to avoid: yes
none specified by manufacturer.

stability condition to avoid: none specified by manufacturer.

hazardous decomposition products: carbon dioxide,carbon monoxide,oxides
of nitrogen and sulfur,phenolics,hydrogen sulfide.

Proper Disposal

Waste disposal methods: recycle,incinerate or surrender to a waste
treatment facility in accordance with federal,state and local
regulations.

disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.

Ingredients List

Ingred name: calcium carbonate
cas: 471-34-1
rtecs #: ff9335000
fraction by wt: 40.2%
other rec limits: none recommended

ingred name: titanium dioxide
cas: 13463-67-7
rtecs #: xr2275000
fraction by wt: 2.5%
other rec limits: none recommended
osha pel: 15 mg/m3 tdust
acgih tlv: 10 mg/m3 tdust; 9495

ingred name: silica, crystalline - quartz
cas: 14808-60-7
rtecs #: vv7330000
fraction by wt: 0.36%
other rec limits: none recommended
osha pel: see table z-3
acgih tlv: 0.1 mg/m3 rdust;9495

ingred name: non-hazardous ingredients
fraction by wt: 55%
other rec limits: none recommended

ingred name: formaldehyde (sara 302/313) (cercla)
cas: 50-00-0
rtecs #: lp8925000
fraction by wt:
other rec limits: none recommended
osha pel: see 1910.1048
acgih tlv: c 0.3 ppm, a2; 9495
epa rpt qty: 100 lbs
dot rpt qty: 100 lbs

ingred name: ethylene oxide (sara 302/313) (cercla)
cas: 75-21-8
rtecs #: kx2450000
other rec limits: none recommended
osha pel: 1 ppm; see 1910.1047
acgih tlv: 1 ppm, a2; 9495
epa rpt qty: 10 lbs
dot rpt qty: 10 lbs

MSDS BYRRZ THIOKOL MC-236 ACCELERATOR

Hazards

Health hazards acute and chronic: **irritant** eyes: may cause mild to
moderate irritation.Skin: may cause irritation or allergic
reactions.Ingest: may cause gi tract irritation.Inhal: may cause
respiratory irritation.Chronic: may damage l iver,kidneys,eyes and
skin and cause allergic reactions.

explanation of carcinogenicity: there are no ingredients above 0.1%
which are identified as carcinogens by ntp,iarc or osha.

effects of
overexposure: inhal: dizziness,headache,incoordination.Ingest: nausea,
vomiting,gastrointestinal upset.

medical cond aggravated by exposure: persons with pre-existing
liver,kidney,skin,immune system disorders or allergies may be at
increased risk from exposure.

First Aid

First aid: skin: remove contaminated clothing;wash with soap and
water.See doctor if irritation develops.Eyes: flush with water for
15 minutes.See doctor if irritation develops.Inhal: remove to fresh
air.Give oxyge n or artificial respiration if needed.Ingest: get
prompt qualified medical attention.Induce vomiting with syrup of
ipecac,followed by 2 glasses water or stick finger down throat.

Chemical Properties

Hcc: n1
vapor pres: 0.1
spec gravity: 2.1
viscosity: 100-500 p
evaporation rate & reference:
solubility in water: slight
appearance and odor: not reported.

Reactivity

Stability indicator/materials to avoid: yes
oxidizing agents,chemically active metals(nickel, cobalt,iron,copper).

stability condition to avoid: none specified by manufacturer.

hazardous decomposition products: carbon dioxide,carbon monoxide,oxides
of nitrogen and metals.

Proper Disposal

Waste disposal methods: recycle,incinerate or surrender to a waste
treatment facility in accordance with federal,state and local
regulations.

disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.

Ingredients List

Ingred name: manganese dioxide
cas: 1313-13-9
rtecs #: op0350000
fraction by wt: 60-70%
other rec limits: none recommended
osha pel: 5 mg mn/m3 ceiling
acgih tlv: 5 mg mn/m3

ingred name: hydrogenated terphenyls
cas: 61788-32-7
rtecs #: wz6535000
fraction by wt: 10-30%
other rec limits: none recommended
osha pel: 0.5 ppm
acgih tlv: 0.5 ppm; 9495

ingred name: terphenyl
cas: 26140-60-3
rtecs #: wz6450000
fraction by wt: 1-5%
other rec limits: none recommended
osha pel: c 1.0 ppm
acgih tlv: c 0.53 ppm; 9495

ingred name: polyoxyethylene nonyl phenyl phosphate
cas: 51811-79-1
fraction by wt: 1-5%
other rec limits: none recommended

ingred name: 1,3 diphenyl guanidine,
cas: 102-06-7
rtecs #: mf0875000
fraction by wt: 1-5%
other rec limits: none recommended

ingred name: sodium hydroxide (cercla)
cas: 1310-73-2
rtecs #: wb4900000
fraction by wt: 1-5%
other rec limits: none recommended
osha pel: 2 mg/m3
acgih tlv: c 2 mg/m3; 9495
epa rpt qty: 1000 lbs
dot rpt qty: 1000 lbs

ingred name: non-hazardous ingredients(proprietary ingredients)
fraction by wt: 0.19%
other rec limits: none recommended

MSDS CCQSS POLYSULFIDE RUBBER COMPOUND, PR-1440 B-1/2,

Chemical Properties

Hcc: n1
viscosity: 10,500p7@2rpm
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.

Ingredients List

Ingred name: titanium dioxide
cas: 13463-67-7
rtecs #: xr2275000
fraction by wt:
other rec limits: none recommended
osha pel: 10 mg/m3
acgih tlv: 10 mg/m3

ingred name: calcium carbonate (marble) (limestone)
cas: 1317-65-3
rtecs #: ev9580000
fraction by wt: 30.0%
other rec limits: none recommended
osha pel: 15 mg/m3
acgih tlv: 10 mg/m3

ingred name: toluene (sara 313) (cercla) (vp = 23.0)
cas: 108-88-3
rtecs #: xs5250000
fraction by wt:
other rec limits: none recommended
osha pel: 100 ppm/stel 150
acgih tlv: 50 ppm
epa rpt qty: 1000 lbs
dot rpt qty: 1000 lbs

ingred name: polysulfide polymer (nonhazardous)
cas: 68611-50-7
other rec limits: none recommended

ingred name: voc = 35 g/l
rtecs #: 9999999vo
fraction by wt: na
other rec limits: none recommended
osha pel: not relevant
acgih tlv: not relevant

MSDS CCQST MANGANESE DIOXIDE DISPERSION PR1440 B-1/2 1

Chemical Properties

Hcc: n1
viscosity: 1220p#6@10rpm
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.

Ingredients List

Ingred name: hydrogenated terphenyls (vp = 1.0)
cas: 61788-32-7
rtecs #: wz6535000
fraction by wt: 30.0%
other rec limits: none recommended
osha pel: 0.5 ppm
acgih tlv: 0.5 ppm

ingred name: carbon black
cas: 1333-86-4
rtecs #: ff5800000
fraction by wt: 5.0%
other rec limits: none recommended
osha pel: 3.5 mg/m3
acgih tlv: 3.5 mg/m3

ingred name: manganese dioxide (sara 313)
cas: 1313-13-9
rtecs #: op0350000
fraction by wt: 55.0%
other rec limits: none recommended
osha pel: 5 mg/m3 ceiling
acgih tlv: 5 mg/m3 (as mn)

ingred name: 1,3 diphenyl guanidine
cas: 102-06-7
fraction by wt:
other rec limits: none recommended

MSDS CCXPX CS 3204 TYPE II CLASS B PART A

Chemical Properties

Hcc: n1
viscosity: 12000 poises
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.

Ingredients List

Ingred name: liquid polysulfide polymer
cas: 68611-50-7
other rec limits: none recommended

ingred name: voc = 9 g/l
rtecs #: 9999999vo
other rec limits: none recommended
osha pel: not relevant
acgih tlv: not relevant

MSDS CCXPY CS 3204 PART B

Chemical Properties

Hcc: n1
viscosity: 1000 poises
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.

Ingredients List

Ingred name: manganese dioxide
cas: 1313-13-9
rtecs #: op0350000
fraction by wt: 65.0%
other rec limits: none recommended
osha pel: 5 mg/m3
acgih tlv: 5 mg/m3

ingred name: voc = 1 g/l
rtecs #: 9999999vo
fraction by wt: na
other rec limits: none recommended
osha pel: not relevant
acgih tlv: not relevant

MSDS CLGLR AC-236 ACCELERATOR

Hazards

Health hazards acute and chronic: emergency overview: may cause allergic
skin reaction and sensitization. Inhalation may cause dizziness.

headache and incoordination. May cause moderate eye irritation. May
cause respiratory tract irri tation. May cause digestive tract
irritation. Ingestion may cause nausea, vomiting, pain, upset
stomach, diarrhea. May cause skin irritation.

effects of overexposure: eye contact: may cause moderate irritation.

skin contact: may cause slight to mild irritation. May cause
allergic skin reactions and sensitization. Inhalation: irritating
to the eyes, nose, and respir atory tract. Can cause dizziness,
headaches, and incoordination. Ingestion: irritating to the mouth,
throat, and stomach. May cause nausea, vomiting, pain, and stomach
upset. `
medical cond aggravated by exposure: liver, kidneys, lungs, and
respiratory system. Skin. Immune systems and/or specific chemical
allergies.

First Aid

First aid: eye contact: immediately flush eyes with plenty of water for
at least 15 minutes. Get medical attention if irritation persists.

skin contact: immediately flush with water. Remove contaminated
clothing and shoes. Get medical attention if irritation persists.

professionally wash clothing and shoes before re-use. Inhalation:
remove to fresh air. If symptoms develop, seek immediate medical
attention. If not breathing, give artificial respiration.

ingestion: seek medical attention. Immediately induce vomiting,
direct treatment at preventing absorption, administering to
symptoms, supportive therapy.

Chemical Properties

Vapor pres: 0.1mm hg
vapor density: >1
spec gravity: 2.1
evaporation rate & reference:
solubility in water: insoluble
appearance and odor: black paste distinct odor

Reactivity

Y-immediate health hazard, y-delayed health hazard
federal regulatory information: ozone-depleting chemicals-no regulated
ingredients. Sara section 302 extremely hazardous mat-no regulated
ingredients. Sara section 313 toxic chemicals manganese oxide.

chemical listing-listed on the following coun
state regulatory information: pennsylvenia-new jersey r-t-k manganese
oxide 1313-13-9, terphenyl, hydrogenated 61788-32-7,
1,3-diphenylquanidine 102-06-7, terphenyl 26140-60-3, ethoxylated
nonylphenol phosphate51811-79-1, sodium h ydroxide 1310-73-2.

Proper Disposal

Waste disposal methods: disposal: dispose in accordance with all local,
state, and federal regulations. General statements: federal
regulations may apply to empty container. State and/or local
regulations may be different. G eneral recommendations: of the
methods of disposal currently available, it is recommended that an
al ternative be selected according to the following o

Ingredients List

Ingred name: manganese oxide
cas: 1313-13-9
rtecs #: op0350000
= wt: 66.4
osha pel: c5 mg/m3
acgih tlv: 5 mg/m3

ingred name: terphenyl, hydrogenated
cas: 61788-32-7
rtecs #: wz6535000
= wt: 22.7
acgih tlv: 4.9 mg/m3;0.5 ppm

ingred name: 1,3-diphenylguanidine
cas: 102-06-7
rtecs #: mf0875000
= wt: .7

ingred name: terphenyl
cas: 26140-60-3
rtecs #: wz6450000
= wt: 4.8
osha pel: c9 mg/m3;c1 ppm
acgih stel: c5 mg/m3;c0.53 ppm

ingred name: ethoxylated nonylphenol phosphate
cas: 51811-79-1
code: f
= wt: 2.9

ingred name: sodium hydroxide
cas: 1310-73-2
rtecs #: wb4900000
= wt: 1.4
osha pel: 2 mg/m3
acgih stel: c2 mg/m3
epa rpt qty: 1000 lbs
dot rpt qty: 1000 lbs

ingred name: non-hazardous and other ingredients below reportable
levels.

= wt: 0.

MSDS CLJLL MANGANESE DIOXIDE DISPERSION PR1725 B-1/2 - ACCELERATOR

Hazards

Effects of overexposure: hydrogenated terphenyl eyes: irritating skin:
prolonged soaking in hydrogenated terphenyl may produce dermal
irritation. inhalation: may cause dizziness, drowsiness, and
fatigue. Due to very low vo latility of this ingredient, inhalation
exposure is unlikely under normal condition of use. Ingestion:
practically non-toxic. carbon black (carcinogen) by iarc carbon
black contains small amounts of tightly adsorbed hydrocarbons,
which have been classified by iarc as carcinogenic. The
polyaromatic hydrocarbons are not normally an exposure risk when
handling carbon black containing products.

First Aid

First aid: eyes: flush with water for 15 minutes. If symptoms persist,
consult a physician. skin: wash with soap and water. Do not use
solvents. Consult physician. inhalation: remove to fresh air. If
symptoms are present consult a physician. Ingestion. Consult a
physician.

Chemical Properties

Boiling pt: =340.C, 644.F
spec gravity: 1.97
evaporation rate & reference: non volatile
appearance and odor: black paste

Reactivity

Stability indicator/materials to avoid: yes
easily oxidizable materials.

stability condition to avoid: not known
hazardous decomposition products: oxides of carbon and nitrogen,
manganese compounds.

Proper Disposal

Waste disposal methods: not a hazardous waste according to epa
regulations. Consult state regulations prior to disposal to
disposal of spillage.

disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.

Ingredients List

Ingred name: hydrogenated terphenyl
cas: 61788-32-7
rtecs #: wz6535000
= wt: 30.

acgih tlv: 4.9 mg/m3;0.5 ppm

ingred name: carbon black
cas: 1333-86-4
rtecs #: ff5800000
< wt: 5.

osha pel: 3.5 mg/m3
acgih tlv: 3.5 mg/m3

ingred name: manganese dioxide
cas: 1313-13-9
rtecs #: op0350000
= wt: 55.

osha pel: c5 mg/m3
acgih tlv: 5 mg/m3

ingred name: talc
cas: 14807-96-6
rtecs #: ww2710000
< wt: 5.

osha pel: see table z-3
acgih tlv: 2 mg/m3

ingred name: diphenylguanidine
cas: 102-06-7
rtecs #: mf0875000
< wt: 5.

MSDS CLJLM POLYSULFIDE RUBBER COMPOUND PR1725 B-1/2 - BASE COMPOUND

Hazards

Effects of overexposure: phenolic resin eyes: it may cause irritation,
redness and tearing. Skin: allergic skin
rash in sensitized individuals. Ingestion: may cause gastrointestinal
irritation.

toluene eye: may cause bur ning, tearing, and reddening. Skin:
prolonged exposure
may cause drying and cracking of skin, and possible dermatitis.

inhalation: may
cause dizziness, drowsiness and fatigue. May cause liver and ki dney
damage.

ingestion: may cause drowsiness, dizziness and nausea. Effects of long
term (chronic)
exposure may cause disturbance in memory, thinking ability, emotions
and
coordination.

First Aid

First aid: eyes: flush with water for 15 minutes. If symptoms persist,
consult a physician. Skin: wash with soap and water. Do not use
solvents. Consult physician. Inhalation: remove to fresh air. If
symptoms are present consult a physician. Ingestion. Consult a
physician.

Chemical Properties

Vapor density: >air
spec gravity: 1.6
voc pounds/gallon: 55
evaporation rate & reference: non volatile
appearance and odor: white paste
percent volatiles by volume: 5

Reactivity

Stability indicator/materials to avoid: yes
strong oxidizing agents
stability condition to avoid: not known
hazardous decomposition products: oxides of carbon and nitrogen, sulfur
dioxide, traces of hydrogen sulfide

Proper Disposal

Waste disposal methods: not a hazardous waste according to epa
regulations. Consult state regulations
prior to disposal to disposal of spillage.

disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.

Ingredients List

Ingred name: phenolic resin
cas: 28470-78-2
< wt: 5.


ingred name: titanium dioxide
cas: 13463-67-7
rtecs #: xr2275000
= wt: 5.

osha pel: 15 mg/m3
acgih tlv: 10 mg/m3

ingred name: calcium carbonate @ limestone
cas: 1317-65-3
rtecs #: ev9580000
= wt: 30.

osha pel: 15 mg/m3
acgih tlv: 10 mg/m3

ingred name: toluene
cas: 108-88-3
rtecs #: xs5250000
< wt: 5.

osha pel: see table z-2
acgih tlv: 188 mg/m3;50 ppm
epa rpt qty: 1000 lbs
dot rpt qty: 1000 lbs

ingred name: polysulfide polymer
cas: 68611-50-7

ingred name: alkyl polysulfide polymer
cas: 68426-28-8

MSDS CLKFJ AC-236 CLASS B BASE

Hazards

Routes of entry: inhalation: yes skin: yes ingestion: no
health hazards acute and chronic: lungs and respiratory system.

effects of overexposure: eye contact: may cause mechanical irritation
skin contact: incidental contact is not expected inhalation
(breathing): exposure is unlikely ingestion (swallowing): exposure
is unlikely, may cause n ausea, vomiting, pain, and stomach upset
(e.G., diarrhea)
medical cond aggravated by exposure: lungs and respiratory system

First Aid

First aid: eye contact: immediately flush eyes with plenty of water for
at least 15 minutes. Get medical attention if irritation persists.

skin contact: immediately flush with water. Remove contaminated
clothin g and shoes. Get medical attention if irritation persists.

professionally wash clothing and shoes before re-use. inhalation
(breathing): remove to fresh air. If symptoms develop, seek
immediate medic al attention. If not breathing, give artificial
respiration. ingestion (swallowing): seek medical attention:
immediately induce vomiting, as directed by medical personnel.

never give anything by mout h to an unconscious person.

Chemical Properties

Vapor pres: 0.1 mm hg
vapor density: >1
spec gravity: 2.1
evaporation rate & reference:
solubility in water: insoluble
appearance and odor: pff-white paste and sulfide odor

Reactivity

Stability indicator/materials to avoid: yes
oxidizers, acids
stability condition to avoid: high temperatures
hazardous decomposition products: smoke, soot, and toxic/irritating
fumes (i.E., carbon dioxide, carbon monoxide, etc). Formaldehyde
and/or other aldehydes. Oxides of nitrogen, metallic oxides.

Proper Disposal

Waste disposal methods: dispose of according to applicable local, state
and federal regulations of the methods of disposal currently
available, it is recommended that an alternative be according or
the following order of pre ference. Based upon environmental
acceptability. (1) recycle or rework, if feasible; (2) incinerate
at an authorized facility.

Ingredients List

Ingred name: limestone
cas: 1317-65-3
rtecs #: ev9580000
= wt: 38.5
osha pel: 15 mg/m3
acgih tlv: 10 mg/m3

ingred name: calcium carbonate
cas: 471-34-1
rtecs #: ff9335000
= wt: 3.


ingred name: titanium dioxide
cas: 13463-67-7
rtecs #: xr2275000
= wt: 2.5
osha pel: 15 mg/m3
acgih tlv: 10 mg/m3

ingred name: formaldehyde
cas: 50-00-0
rtecs #: lp8925000
< wt: .1
osha pel: see 1910.1048
acgih stel: c0.37 mg/m3;c0.3 ppm
epa rpt qty: 100 lbs
dot rpt qty: 100 lbs

ingred name: non-hazardous and other ingredients below reportable levels

MSDS CLKGZ AC-236 ACCELERATOR

Hazards

Routes of entry: inhalation: yes skin: yes ingestion: yes
health hazards acute and chronic: chronic effects: liver, kidneys,
nervous system. Blood and/or blood-forming organs. Lungs and
respiratory system. Reproductive system (and reproductive effects).

eyes. Skin. Immune system, (e.G., alle rgic reactions).

effects of overexposure: eye contact: may cause moderate irritation
skin contact: may cause slight to mild irritation. May cause
allergic skin reactions and sensitizations. inhalation
(breathing): irritating to the eyes, no se, and respiratory tract.

can cause dizziness, headache, and incoordination. Ingestion
(swallowing): irritating to the mouth. May cause nausea, vomiting,
pain, and stomach upset (e.G., diarrhea)
medical cond aggravated by exposure: liver, kidneys, lungs and
respiratory system. Skin. Immune system and/or specific chemical
allergies.

First Aid

First aid: eye contact: immediately flush eyes with plenty of water for
at least 15 minutes. Get medical attention if irritation persists.

skin contact: immediately flush with water. Remove contaminated
clothin g and shoes. Get medical attention if irritation persists.

professionally wash clothing and shoes before re-use. inhalation
(breathing): remove to fresh air. If symptoms develop, seek
immediate medic al attention. If not breathing, give artificial
respiration. ingestion (swallowing): seek medical attention:
immediately induce vomiting, as directed by medical personnel.

never give anything by mout h to an unconscious person.

Chemical Properties

Vapor pres: 0.1 mm hg
vapor density: >1
spec gravity: 2.1
evaporation rate & reference:
solubility in water: insoluble
appearance and odor: black paste and distant odor

Reactivity

Stability indicator/materials to avoid: yes
oxidizers, acids
stability condition to avoid: high temperatures
hazardous decomposition products: smoke, soot, and toxic/irritating
fumes (i.E., carbon dioxide, carbon monoxide, etc). Formaldehyde
and/or other aldehydes. Oxides of nitrogen, metallic oxides.

Proper Disposal

Waste disposal methods: dispose of according to applicable local, state
and federal regulations of the methods of disposal currently
available, it is recommended that an alternative be according or
the following order of pre ference. Based upon environmental
acceptability. (1) recycle or rework, if feasible; (2) incinerate
at an authorized facility.

Ingredients List

Ingred name: manganese oxide
cas: 1313-13-9
rtecs #: op0350000
= wt: 66.4
osha pel: c5 mg/m3
acgih tlv: 5 mg/m3

ingred name: hydrogenated terphenyl
cas: 61788-32-7
rtecs #: wz6535000
= wt: 22.7
acgih tlv: 4.9 mg/m3;0.5 ppm

ingred name: 1,3-diphenylguanidine
cas: 102-06-7
rtecs #: mf0875000
= wt: .7

ingred name: terphenyl
cas: 26140-60-3
rtecs #: wz6450000
= wt: 4.8
osha pel: c9 mg/m3;c1 ppm
acgih stel: c5 mg/m3;c0.53 ppm

ingred name: ethoxylated nonylphenol phosphate
cas: 51811-79-1
= wt: 4.8

ingred name: sodium hydroxide
cas: 1310-73-2
rtecs #: wb4900000
= wt: 1.4
osha pel: 2 mg/m3
acgih stel: c2 mg/m3
epa rpt qty: 1000 lbs
dot rpt qty: 1000 lbs

MSDS CLKQM AC-236 ACCELERATOR

Hazards

Reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: eye contact: may cause moderate
irritation. skin contact: may caus slight to mild irritation. May
cause allergic skin reactions and sensitization. inhalation
(breathing): irritating to the eyes, no se, and respiratory tract.

can cause dizziness, headaches, and incoordination. ingestion
(swallowing): irritating to the mouth, throat, and stomach. May
cause nausea, vomiting, pain, and stomach upse t. Target
organs/chronic effects: liver, kidneys, nervous system, blood
and/or blood-forming organs. Lungs and respiratory system.

reproductive system (and reproductive effects). Eyes, skin, immune
system, (allergic reactions).

effects of overexposure: emergency overview: may cause allergic skin
reaction and sensitization. Inhalation may cause dizziness,
headache and incoordination. May cause moderate eye irritation. May
cause respiratory tract irr itation. May cause digestive tract
irritation. Ingestion may cause nausea, vomiting, pain, upset
stomach, diarhea, may cause skin irritation.

medical cond aggravated by exposure: liver, kidneys, lungs and
respiratory system. Skin, immune systems and/or specific chemical
allergies.

First Aid

First aid: eye contact: immediately flush eyes with plenty of water for
at least 15 minutes. Get medical attention if irritation persists.

skin contact: immediately flush with water. Remove contaminated
clothi ng and shoes. Get medical attention if irritation persists.

professionally wash clothing and shoes before re-use. inhalation
(breathing): remove to fresh air. If symptoms develop, seek
immediate medi cal attention. If not breathing, give artificial
respiration. ingestion: seek medical attetion. Immediately induce
vomiting, as directed by medical personnel. Never give anything by
mouth to an uncon scious person.

Chemical Properties

Vapor pres: 0.1 mm hg
vapor density: >1
spec gravity: 2.1
solubility in water: insoluble
appearance and odor: black paste distinct odor

Reactivity

Stability indicator/materials to avoid: yes
oxidizers, acids.

stability condition to avoid: high temperatures

Proper Disposal

Waste disposal methods: collection and disposal: stop discharge, if safe
to do so. Use proper protective equipment. Cover spills with
absorbent clay or sawdust and place in closed chemical waste
containers. Dispose of accord ing to applicable local, state and
federal regulations. reporting: spills of this material in exces s
of a components rq must be reported to the natio

Ingredients List

Ingred name: manganese oxide
cas: 1313-13-9
rtecs #: op0350000
= wt: 66.4
osha pel: c5 mg/m3
acgih tlv: 5 mg/m3

ingred name: terphenyl, hydrogenated
cas: 61788-32-7
rtecs #: wz6535000
= wt: 22.7
acgih tlv: 4.9 mg/m3;0.5 ppm

ingred name: 1,3-diphenylguanidine
cas: 102-06-7
rtecs #: mf0875000
= wt: .7

ingred name: terphenyl
cas: 26140-60-3
rtecs #: wz6450000
= wt: 4.8
osha pel: c9 mg/m3;c1 ppm
acgih stel: c5 mg/m3;c0.53 ppm

ingred name: ethoxylated nonylphenol phosphate
cas: 51811-79-1
code: f
= wt: 2.9

ingred name: sodium hydroxide
cas: 1310-73-2
rtecs #: wb4900000
= wt: 1.4
osha pel: 2 mg/m3
acgih stel: c2 mg/m3
epa rpt qty: 1000 lbs
dot rpt qty: 1000 lbs

ingred name: non-hazardous and other ingredients below reportable levels