Secure Ordering: +1 (757) 528-8028
NationalStockNumber.info
NationalStockNumber.INFO

Worldwide distributor of NSN parts and consumables located in the USA.

Sealing Compound

NSN: 8030-00-755-4760 | Model: Q4-2817

A chemical composition formulated for coating or for filling voids, cracks, joints or seams of objects and/or materials to exclude foreign matter and/or prevent the transmission of fluids therethrough. It is not designed to act as a primer coating or to be sanded or ground after application. It cannot be wiped off. For items which are specifically compounded to provide electrical insulating characteristics, use insulating compound, electrical. Excludes caulking compound; gasket cement; corrosion preventive compound; cement, iron and steel; plumbing fixture setting compound; preservative coating, rubber and textile treating compounds.

NSN Properties and Flags
NATO Stock Number
8030-00-755-4760
DEMIL
NO
Physical Form
Paste
Quantity Within Each Unit Package
5.400 ounces
Specific Usage Design
For aircraft fuel tanks
Rated Drying Time
1.000 hours
Special Features
Fluorosilicone; service temperature range of minus 55 degrees c to plus 260 degrees c; room temperature cure; resistant to weathering, moisture and ozone; for use on equipment exposed to solvents, oil and fuels
Color
Red
Supplementary Features
5.4 ounce cartridge
Recent Solicitations
Solicitation Return by Date Buyer Code Quantity
SPE8ES18T1035 2017-11-13 PEPCE 35 CA
SPE8ES18T0077 2017-10-10 PEPCE 3 CA
SPE8ES18T0031 2017-10-10 PEPCE 390 CA
SPE8ES17T6726 2017-09-13 PEPCE 43 CA
SPE8ES17Q0653 2017-08-16 PHPHB 1 CA
SPE8E917T2409 2017-07-17 PEPCA 4 CA
SPE8E917Q0250 2017-07-14 PEPCD 200 CA
SPE8ES17T2225 2017-02-13 PEPCE 240 CA
SPE8E515T6155 2015-04-13 PEPCF 332 CA

Inventory Check

The last inventory check on this NSN was done on 09/25/2021. Due to rapid changes in inventory this may not be the current stock qty.

  • New: 18
  • New Surplus: 22
  • As Removed: 1
  • Serviceable: 1

Pricing and Availability

Send us a request for quote using the form below. Our team will contact you with an up to date pricing and availability quote ASAP.

Qty:
Email Address:
Phone Number:
Your name:
Company:
Privacy    Terms

Certified Quality Assurance  Quality check icon

  •   ISO 9001:2015 + AS9120B
  •   Counterfeit Parts Prevention
  •   100% Product Inspections
  •   7 Year Record Retention
  •   On Time Delivery
  •   HAZMAT Certified
  •   Worldwide Shipping

NSN 8030-00-755-4760 Datasheet

Supply Class (FSC):
Preservative And Sealing Compounds
Cross Reference:
  • Q4-2817
  • FRV1106
  • GC115AF1
  • 94-002
  • 378-5621
  • 1888684
Cage Codes:
  • Dow Corning Corporation (CAGE 71984)
  • Momentive Performance Materials Inc. (CAGE 01139)
  • Northrop Grumman Systems Corporation (CAGE 26512)
Schedule B & Trade:
  • Schedule B: 3214100010 (NAICS 325520)

    Caulking compounds

  • SITC: 53354

    Glaziers' putty; grafting putty; resin cement, caulking compounds and other mastics; painters' fillings; nonrefractory surfacing preparations

  • End Use: 13210

    Shingles, molding, wallboard

Identification:
HMIC

Y - Indicates information is in the hazardous materials information resource system (hmirs).

PMIC

A - Item does not contain precious metal.

CRITL

- The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.

Freight Information:
  • NMFC:

    149610 - Caulking/glaziers compounds noi

  • WCC:

    620 - Paint, in individual containers less than 10 cubic ft

  • SHC:

    9 - Other or no special handling required (sh)

  • ADC:

    A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

  • ACC:

    B - Construction materials: includes paint and related materials, prefabricated building, wood products, metal and composition mater

  • TCC:

    R - Flammable liquids, un class 3 (flammable liquids label)

  • LTL:

    T - 55.0

NSN Management Codes:
  • SOS
    Gsa
  • AAC
    G
  • Quantity per pack
    144
  • Unit of Measure
    Ca
  • Shelf Life
    6 mo.
  • Classification Control
    U
  • MGMT_CTL
    Sf9---n
  • Repariability

Questions & Answers:

What are the historical prices recorded for this stock number?
Historical data shows pricing from $1,716.51 to $2,860.85..
Does NSN 8030-00-755-4760 have a shelf life?
No. There is no shelf life applicable for this NSN.
What NATO entities are users of this NSN?
Department Of The Air Force, Department Of The Navy, General Services Administration, Poland, Spain, Singapore, Kuwait, Australia, Belgium, Canada, New Zealand, France, Germany, Republic Of Korea, Netherlands, Italy, Denmark, Norway, Greece, and Turkey
What is the NIIN of NSN 8030-00-755-4760?
007554760 or 00-755-4760
Does NSN 8030-00-755-4760 require demilitarization?
Yes - ITAR Controlled
What is the most recent solicitation for NSN 8030-00-755-4760?
Solicitation SPE8ES18T1035 for qty 35 on 11/06/2017
When was this national stock number assigned to the federal catalog?
Mar 01, 1968
MSDS

Material Safety

MSDS BFNPK DOW CORNING 9-4002,SEALANT

Hazards

Effects of overexposure: irritates eyes. Prolonged or repeated contact
may irritate skin.

First Aid

First aid: skin & eyes: flush w/water.

Chemical Properties

Hcc: n1
boiling pt: b.P. Text: >300f
solubility in water: negligible
appearance and odor: paste-like;acetic acid-like odor

Reactivity

Stability indicator/materials to avoid: yes
stability condition to avoid: moisture & air will cause polymerization.

hazardous decomposition products: s1o*2,co*2, f cmpds, traces of
incmpltly burned carbon produ

Proper Disposal

Waste disposal methods: mfg recm landfill, if in accordance w/fed, state
& local codes.

disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.

Ingredients List

Ingred name: acetoxy silane (approx. 5.0%)

MSDS BVTYW DOW CORNING(R) Q4-2817 FLUOROSILICONE SEALANT

Hazards

Reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: eye-direct contact irritates. Skin-a
single short exposure may irritate. Inhalation-vapor overxeposure
may irritate eyes, nose & throat. Oral-small amounts transferred to
the mouth by fingers during u se should not injur. Swallowing large
amounts may injure seriously.

effects of overexposure: eye-may be serious withrtedness, swelling and
some corneal injury lasting several days to a week.

medical cond aggravated by exposure: this product, as with any chemical,
may enhance allergic conditions on certain people. We do not know
of any medical conditions that might be aggravated by exposure to
this product.

First Aid

First aid: eyes: immediately flush with water for 15 minutes. Get
medical attention. Skin: wipe off and flush with water. Get medical
attention if irritation develops. Inhalation: remove to fresh air.

oral: get medical attention.

Chemical Properties

Hcc: n1
spec gravity: 1.8
solubility in water: less than 0.1
appearance and odor: acetic acid-like, paste, red.

percent volatiles by volume:

Reactivity

Stability indicator/materials to avoid: yes
oxidizing material can cause a reaction.

stability condition to avoid: exposure to air or moisture until ready to
use - causes curing and acetic acid vapors form.

hazardous decomposition products: iron oxides, fluorine compounds,
silicon dioxide, carbon dioxide, traces of incompletely burned
carbon products.

Proper Disposal

Waste disposal methods: dow corning suggests that all local, state and
federal regulations concerning health and pollution be reviewed to
determine approved disposal procedures. Contact dow corning if
there are any disposal questions.

disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.

Ingredients List

Ingred name: methyltriacetoxysilane (observe limits for acetic acid,
formed during curing on exposure to water or humid air)
cas: 4253-34-3
rtecs #: vv4500000
fraction by wt: 2%
other rec limits: none specified
osha pel: 10 ppm
acgih tlv: 10 ppm/stel 15 ppm

ingred name: ethyltriacetoxysilane (observe limits for acetic acid,
formed during curing on exposure to water or humid air)
cas: 17689-77-9
fraction by wt: 3%
other rec limits: none specified
osha pel: 10 ppm
acgih tlv: 10 ppm/stel 15 ppm

ingred name: iron oxide
cas: 1309-37-1
rtecs #: no7400000
fraction by wt: 33%
other rec limits: none recommended
osha pel: 10 mg/m3 (fe)
acgih tlv: 5mg(fe)/m3fume,b2;94

ingred name: trimethylated silica
cas: 68909-20-6
fraction by wt: 6%
other rec limits: none recommended

MSDS CKJPL DOW CORNING (R) Q4-2817 FLUOROSILICONE SEALANT

Hazards

Health hazards acute and chronic: this material may form highly toxic
vapors of trifluoropropionaldyhyde if heated above 300 degres (149
degrees cecius.0 provide ventelation to dontrol bapor exposure.

(inhalation guilelines have not b een established.- when heated to
temperatures abobe 180 celcius, in the presence of air, product can
form formaleehyde vapors. Formaldehyde is a potential cancer hazard
a known skin sensitizer; and an iritant to the eyes noese throat
skin and digestive system. Safe handling conditions may be
maintained by keeping bapor concentrations within the osha
permissible exposure limit fo rforr formaldehyde .*
effects of overexposure: acutw: eye dirrect contact irritates moderat4ly
with redness and swelling. Skkin; a single hort exposure )less than
24 hours0 mya iritate. Repeated prolonged contat (24 to 48 hours0
may irritate moder ately. Inhalation; vapor overecposure may
irritate eyes noee and throat. Oral; small amounts tansreres to the
mouth by fingers during use, etc., should ot injure. Swollowing
large amounts may injure s lightly.

First Aid

First aid: eyes: flush with water for 15 minutes, get medical
attention. Skin, rmmove from skin and rlush with water of wterless
cleanser. Get immediate medical atttemtion if symptomes persist.

inhalation; remo ve to fresh air. Oral; get medcical attention.

comments: treat according to person's condition and specifics of
exposure.

Chemical Properties

Spec gravity: 1.80@25c.

solubility in water: none
appearance and odor: red paste with acetic acid odor.***

Reactivity

Stability indicator/materials to avoid: yes
oxidizing material can cause a reaction. Water, moisture or humid
air--hazardous vapors form as described in ingredients section.

(vinyltriacetoxysilane)
stability condition to avoid: none
hazardous decomposition products: fluorine compounds, carbon oxides and
traces of incompletely burned carbon comp oxides carbon oxices and
traces of incompletely burned carbon compounds, silicon dioxide,
fluorine compounds formaldehyde.

Proper Disposal

Waste disposal methods: disposal of collected product, rexidures, and
cleanup materials may be governmentally regulated. Observe all
applicable local, state, and federal waste amangevment revulations.

call dow corning envir aonmental management (5117) 496-6315, if
more information i desired.

Ingredients List

Ingred name: iron oxide (observe particulates limits)
cas: 1332-37-2
rtecs #: no7380000
= wt: 33.

other rec limits: osha: 5mg/m3 respira
osha pel: 15mg/m3 twa total du
acgih tlv: 10mg/m3 twa total du

ingred name: methyltriacetoxysilane (acetic acid is formedupon contact
with water of humid air. Provide adequate ventalation to control
exposures within guidelines of exposure limits as provided.)
cas: 4253-34-3
rtecs #: vv4500000
= wt: 2.

other rec limits: stel: 15ppm
osha pel: 10ppm twa
acgih tlv: 10ppm twa

ingred name: ethyltriacetoxysilane (acetic acid is formedupon contact
with water of humid air. Provide adequate ventalation to control
exposures within guidelines of exposure limits as provided.)
cas: 17689-77-9
= wt: 3.

other rec limits: stel; 15ppm
osha pel: 10ppmtwa
acgih tlv: 10ppm twa

ingred name: trimethelated silica
cas: 68909-20-6
= wt: 6.

other rec limits: dowcorning fuide: 5m

MSDS CKMPH Q4-2817 FLUOROSILICONE SEALANT

Hazards

Health hazards acute and chronic: eye: direct contact irritates
moderately with redness and swelling. Skin: a single short exposure
( less than 24 hours) may irritate. Repeated or prolonged contact
( 24 to 48 hours) may irritate mode rately. Inhalation: vapor
exposures may irritate eyes, nose and throat. Oral: small amounts
transferred to mouth by fingers during use etc. Should not injure.

swallowing large ammounts may injure slig htly.

First Aid

First aid: eye: immediately flush with water for 15 minitues. Get
medical attention. Skin: remove from skin and wash throughly with
soap and water or waterless cleanser. Get medical attention if
irritation or ot her ill effects develop or persist. Inhalation:
remove to fresh air. Oral: get medical attention.

Chemical Properties

Spec gravity: 1.80
solubility in water: none
appearance and odor: red paste acetic acid odor

Reactivity

Stability indicator/materials to avoid: yes
oxidizing material can cause a reaction
hazardous decomposition products: thermal breakdown during fire or very
high heat conditions may evolve the following products: fluorine
compounds, carbon oxides, incompletely burned carbon compounds,
silicon dioxide, formaldehyde.

Proper Disposal

Waste disposal methods: disposal of collected product, residues and
clean-up matterials may be governmentally regulated. Observe all
appliciaple local, state and federal waste management regulations.

local, state and federal reporting requirments may apply to spills
or release of this material into the enviorment.

Ingredients List

Ingred name: iron oxide
cas: 1332-37-2
rtecs #: no7380000
= wt: 33.

osha pel: 15 mg/m3
acgih tlv: 10 mg/m3

ingred name: methyltriacetoxysilane
cas: 4253-34-3
rtecs #: vv4500000
= wt: 2.


ingred name: ethyltriacetoxysilane
cas: 17689-77-9
= wt: 3.


ingred name: trimethylated silica
cas: 68909-20-6
= wt: 6.

MSDS CKQQV Q4-2817 FLUOROSILICONE SEALANT

Hazards

Health hazards acute and chronic: eye: direct contact irritates
moderately with redness and swelling.Skin: a single short exposure
(less than 24 hours) may irritate. Repeated prolonged contact (24
to 48 hours) may irritate moderately . Inhalation: vapor
overpressure may irritate eyes, nose and throat. Oral: small
ammounts transferred to the mouth by fingers during use, etc.

should not injure. Swallowing large ammounts may injure s lightly.

medical cond aggravated by exposure:

First Aid

First aid: eye: immediately flush with water for 15 monitues. Get
medical attention. Skin: remove from skin and wash throughly with
soap and water or wterless cleanser. Get medical attention if
irritation or oth er ill effects sevelop or persits. Inhalation:
remover to fresh air. Oral: get medical attention.

Chemical Properties

Spec gravity: 1.80
solubility in water: none
appearance and odor: red paste acetic acid odor

Reactivity

Stability indicator/materials to avoid: yes
oxidizing material can cause a reaction.

stability condition to avoid: none
hazardous decomposition products: thermal breakdown do to fire/ very
high heat conditions may evolve these hazardous decomposition
prod.S: fluorine compounds,carbon oxides,incompletely burned carbon
compound.Silicon dioxide,formaldehyde.

Ingredients List

Ingred name: iron oxide
cas: 1332-37-2
rtecs #: no7380000
= wt: 33.

osha pel: twa 15mg/m3
acgih tlv: twa 10mg/m3

ingred name: methyltriacetoxysilane
cas: 4253-34-3
rtecs #: vv4500000
= wt: 2.


ingred name: ethyltriacetoxysilane
cas: 17689-77-9
= wt: 3.


ingred name: trimethylated silica
cas: 68909-20-6
= wt: 6.

MSDS CLRNT FLUOROSILICONE SEALANT

Hazards

Routes of entry: inhalation: yes skin: yes ingestion: yes
health hazards acute and chronic: eye: direct contact may cause moderate
irritation. Skin: may cause moderate irritation. Inhalation: vapor
overexposure may irritate eyes, nose and throat. Oral: low
ingestion hazard in normal use.

medical cond aggravated by exposure: treat according to a person's
condition and specifics of exposure.

First Aid

First aid: eye: immediately flush with water for 15 minutes. Get medical
attention. Skin: remove from skin and wash thoroughly with soap and
water or waterless cleanser. Get medical attention. Inhalation:
remove to fresh air. Oral: get medical attention,.

Chemical Properties

Spec gravity: 1.80
appearance and odor: paste red acetic acid odor.

Reactivity

Stability indicator/materials to avoid: yes
oxidizing material can cause a reaction. Water, moisture, or humid air
can cause hazardous vapors to form as described in section 2.

hazardous decomposition products: fluorine compounds, carbon oxides,
traces of incompletely burned carbon compounds, silicon dioxide.

formaldehyde.

conditions to avoid polymerization: will not occur.

Proper Disposal

Waste disposal methods: when a decision is nade to discard this
material, as received, is it classified as a hazardous waste ? No
state or local laws may impose additional regulatory requirements
regarding disposal.

Ingredients List

Ingred name: iron oxide
cas: 1332-37-2
rtecs #: no7380000
minumum % wt: 30.

maxumum % wt: 60.


ingred name: methyltriacetoxysilane
cas: 4253-34-3
rtecs #: vv4500000
minumum % wt: 1.

maxumum % wt: 5.


ingred name: ethyltriacetoxysilane
cas: 17689-77-9
minumum % wt: 3.

maxumum % wt: 7.


ingred name: silanamine, 1,1,1-trimethyl-n-(trimethylsilyl)-, hydrolysis
products with silica
cas: 68909-20-6
minumum % wt: 5.

maxumum % wt: 10.