Worldwide distributor of NSN parts and consumables located in the USA.
A chemical composition formulated for coating or for filling voids, cracks, joints or seams of objects and/or materials to exclude foreign matter and/or prevent the transmission of fluids therethrough. It is not designed to act as a primer coating or to be sanded or ground after application. It cannot be wiped off. For items which are specifically compounded to provide electrical insulating characteristics, use insulating compound, electrical. Excludes caulking compound; gasket cement; corrosion preventive compound; cement, iron and steel; plumbing fixture setting compound; preservative coating, rubber and textile treating compounds.
Solicitation | Return by Date | Buyer Code | Quantity |
---|---|---|---|
SPE8ES20T4145 | 2020-04-07 | PEPCE | 275 CA |
SPE8ES20T2648 | 2020-02-19 | PEPCE | 520 CA |
SPE8ES20T0500 | 2019-11-04 | PEPCE | 520 CA |
SPE8ES19T7444 | 2019-08-20 | PEPCE | 216 CA |
SPE8ES19T6333 | 2019-07-01 | PEPCE | 425 CA |
SPE8ES19T5465 | 2019-05-22 | PEPCE | 209 CA |
SPE8ES19T4819 | 2019-04-29 | PEPCE | 684 CA |
SPE8ES19T4516 | 2019-04-15 | PEPCE | 482 CA |
SPE8ES19T4309 | 2019-04-08 | PEPCE | 202 CA |
SPE8ES19T1588 | 2018-12-10 | PEPCE | 235 CA |
The last inventory check on this NSN was done on 08/09/2023. Due to rapid changes in inventory this may not be the current stock qty.
Send us a request for quote using the form below. Our team will contact you with an up to date pricing and availability quote ASAP.
Caulking compounds
Glaziers' putty; grafting putty; resin cement, caulking compounds and other mastics; painters' fillings; nonrefractory surfacing preparations
Shingles, molding, wallboard
Y - Indicates information is in the hazardous materials information resource system (hmirs).
PMICA - Item does not contain precious metal.
ENACGQ - Household consumer products
CRITL- The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
149610 - Caulking/glaziers compounds noi
620 - Paint, in individual containers less than 10 cubic ft
9 - Other or no special handling required (sh)
A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
B - Construction materials: includes paint and related materials, prefabricated building, wood products, metal and composition mater
T - 55.0
Z - No special type of cargo code applicable
Questions & Answers: |
|
What are the historical prices recorded for this stock number? | |
Historical data shows pricing from $145.03 to $241.72.. | |
Does NSN 8030-00-782-1420 have a shelf life? | |
No. There is no shelf life applicable for this NSN. | |
What NATO entities are users of this NSN? | |
Department Of The Army, Department Of The Air Force, U.s. Marine Corps, Department Of The Navy, U.s. Coast Guard, General Services Administration, Austria, Singapore, Australia, Republic Of Korea, United Kingdom, Greece, and Turkey | |
What is the NIIN of NSN 8030-00-782-1420? | |
007821420 or 00-782-1420 | |
Does NSN 8030-00-782-1420 require demilitarization? | |
Yes - ITAR Controlled | |
What is the most recent solicitation for NSN 8030-00-782-1420? | |
Solicitation SPE8ES20T4145 for qty 275 on 04/02/2020 | |
When was this national stock number assigned to the federal catalog? | |
Jan 01, 1960 |
Effects of overexposure: may cause skin or eye irritation upon contact
First aid: wash hands thoroughly.Flush eyes copiously w/water.Give
emetic if ingested.
Hcc: n1
spec gravity: 1.5
appearance and odor: off white to gray semi-solid
percent volatiles by volume: 1.2
Stability indicator/materials to avoid: yes
stability condition to avoid: store below 80f
hazardous decomposition products: strong bases and oxidizing agents
Waste disposal methods: normal non-hazardous trash disposal
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: pigments
fraction by wt: 25%
ingred name: catalyst
fraction by wt: 5%
ingred name: vehicle
fraction by wt: 70%
ingred name: additives
fraction by wt:
Effects of overexposure: not applicable because of paste form
First aid: chelating agents such as ethylenediamine tetracetate
Hcc: n1
spec gravity: 1.85
solubility in water: insoluable
appearance and odor: brown paste,lead odor
Stability indicator/materials to avoid: yes
conditions to avoid polymerization: high temp. Over 300f
Waste disposal methods: regular waste disposal methods for less than 1
pound of lead paste.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: lead peroxide (lead dioxide), (osha pel from 29cfr
1910.1025)
cas: 1309-60-0
rtecs #: og0700000
fraction by wt: 76%
osha pel: 0.05 mg/m3 (pb)
acgih tlv: 0.15 mg/m3(pb); 8990
ingred name: terphenyl
fraction by wt: 23%
ingred name: stearic acid
cas: 57-11-4
rtecs #: wi2800000
fraction by wt: 2%
Effects of overexposure: may cause skin irritation.
First aid: wash thoroughly after handling. Inhalation- move to fresh air
ingestion-consult physician. Eyes-flush with copious amounts water
Hcc: n1
spec gravity: 1.5
solubility in water: negligible
appearance and odor: aluminum paste-sulfide odor
percent volatiles by volume: 15
Stability indicator/materials to avoid: yes
Waste disposal methods: in accordance with state, local or federal
regulations.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: toluene (sara iii)
cas: 108-88-3
rtecs #: xs5250000
fraction by wt: 15%
osha pel: 200 ppm/150 stel
acgih tlv: 50 ppm; 9293
epa rpt qty: 1000 lbs
dot rpt qty: 1000 lbs
Routes of entry: inhalation: yes skin: yes ingestion: yes
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: eyes: irritation. Skin: local
irritation. May cause allergic skin rash in sensitized individuals.
inhalation: irritation to nose and throat. Prolonged exposure can
cause liver and kidney damage. Inges tion: may cause liver and
kidney damage.
effects of overexposure: skin: rash in sensitized individuals.
inhalation: headache, fatigue, confusion, dizziness, drowsiness,
numbness and unconsciousness. Ingestion: may cause nausea and
vomiting.
medical cond aggravated by exposure: none specified by manufacturer.
First aid: eyes: flush with luke warm water for 15 min. Skin: wash with
soap and water. Inhalation: remove to fresh air. Ingestion: consult
a physician. If symptoms persist for any route of exposure, consult
a p hysician.
Hcc: v4
vapor density: 3.2
spec gravity: 1.5
evaporation rate & reference: 2
solubility in water: negligible
percent volatiles by volume: 60
Stability indicator/materials to avoid: yes
strong acids
stability condition to avoid: high temperatures, sparks and open flames.
hazardous decomposition products: oxides of carbon, sulfur dioxide,
t5races of hydrogen sulfide.
Waste disposal methods: not a hazardous waste according to epa
regulations. Consult state, local, and federal regulations proir to
disposal.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: phenol formaldehyde resin
cas: 9003-35-4
fraction by wt:
other rec limits: none specified
ingred name: toluene (sara iii)
cas: 108-88-3
rtecs #: xs5250000
fraction by wt:
other rec limits: none specified
osha pel: 200 ppm/150 stel
acgih tlv: 50 ppm; 9293
epa rpt qty: 1000 lbs
dot rpt qty: 1000 lbs
Routes of entry: inhalation: yes skin: yes ingestion: no
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: eyes: irritation. Skin: local
irritation. Inhalation: although the main hazard of manganese
compounds is by breathing dust, ingestion should be avoided as a
precaution against manganese poisoning.
effects of overexposure: symptoms of manganese poisoning are weakness
and sleepiness.
medical cond aggravated by exposure: none specified by manufacturer.
First aid: eyes: flush with luke warm water for 15 min. If symptoms
persist, consult physician. Skin: wash with soap and water. If
symptoms persist, consult a physician. Inhalation: remove to fresh
air. If sympt oms persist, consult a physician. Ingestion: consult
a physician.
Hcc: n1
spec gravity: 2.0
solubility in water: negligible
Stability indicator/materials to avoid: yes
easily oxidizable materials.
stability condition to avoid: none specified by manufacturer.
hazardous decomposition products: oxides of carbon, manganese compounds.
Waste disposal methods: not a hazardous waste according to epa
regulations. Consult state, local, and federal regulations prior to
disposal of spillage.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: 1,3-diphenyl guanadine
cas: 102-06-7
rtecs #: mf0875000
fraction by wt:
other rec limits: none specified
ingred name: manganese dioxide
cas: 1313-13-9
rtecs #: op0350000
fraction by wt: 60%
other rec limits: none specified
osha pel: 5 mg/m3 ceiling
acgih tlv: 5 mg/m3 (as mn dust)
Routes of entry: inhalation: no skin: no ingestion: yes
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: non established. Possible skin
irritation after prolonged contact, with resulting dermatitis. Not
considered to be a primary skin irritant.
effects of overexposure: skin or eye irritation.
medical cond aggravated by exposure: none known.
First aid: eyes: flush with large amounts of water, consult physician.
skin: wash with soap and water. Ingestion: induce vomiting, consult
physician.
Hcc: n1
melt/freeze pt: m.P/f.P text: liq@rm temp
vapor pres: nil
vapor density: nil
spec gravity: 1.50
evaporation rate & reference: (bu ac=1)
solubility in water: negligible
appearance and odor: aluminum paste, polysulfide odor.
Stability indicator/materials to avoid: yes
avoid strong oxidizing agents and strong acids.
stability condition to avoid: open flame.
hazardous decomposition products: h2s, co, co2, so2, smoke.
Waste disposal methods: react with curing agent and dispose as solid
waste per federal, state and local regulations.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: non hazardous
cas: 68611-50-7
other rec limits: none specified
Routes of entry: inhalation: no skin: no ingestion: yes
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: acute: weakness, stupor. Chronic:
kidney damage, anemia, reproductive defects.
effects of overexposure: headache, muscle and joint pain, neuromuscular
dysfunction.
medical cond aggravated by exposure: anemia, kidney disease, pregnancy.
First aid: ingestion: induce vomiting, consult a physician at once. Eye
contact: flush with large amounts of water and contact physician.
Hcc: n1
boiling pt: b.P. Text: 644f,340c
melt/freeze pt: m.P/f.P text: liq@rm temp
vapor pres: nil
spec gravity: 3.00
evaporation rate & reference: (bu ac=1) nil
solubility in water: negligible
appearance and odor: brown paste, oily odor.
Stability indicator/materials to avoid: yes
oxidizable materials.
stability condition to avoid: high heat.
hazardous decomposition products: lead oxide dust and organics.
Waste disposal methods: return to smeltor for reclamation or react with
base and dispose according to federal, state and local regulations.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: lead dioxide
cas: 1309-60-0
rtecs #: og0700000
fraction by wt: 64%
other rec limits: none specified
osha pel: 0.05 mg/m3
acgih tlv: 0.15 mg/m3
ingred name: lead oxide
cas: 1317-36-8
rtecs #: og1750000
fraction by wt: 6%
other rec limits: none specified
osha pel: 0.05 mg/m3
acgih tlv: 0.15 mg/m3
Hcc: n1
viscosity: 10000 poise
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: phenol polymer w/formaldehyde
cas: 9003-35-4
fraction by wt:
other rec limits: none recommended
ingred name: aromatic amine mixture
cas: 90-72-2
rtecs #: sn3500000
fraction by wt:
other rec limits: 5 ppm skin
Hcc: n1
viscosity: 1400 poises
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: epoxy resin
cas: 25068-38-6
rtecs #: kc2100000
other rec limits: none recommended
ingred name: hydantoin epoxy resin
cas: 15336-82-0
rtecs #: mt9191000
other rec limits: none recommended
ingred name: voc = 2 g/l
rtecs #: 9999999vo
fraction by wt: na
other rec limits: none recommended
osha pel: not relevant
acgih tlv: not relevant
Health hazards acute and chronic: possible skin irritation after
prolonged contact, with resulting dermatitis. not considered to be
a primary skin irritant.
effects of overexposure: skin or eye irritation.
First aid: eyes-flush with large amounts of water, consult physician.
skin-wash with soap and water. ingestion- induce vomiting,
consult physician.
Vapor pres: nil
vapor density: nil
spec gravity: 1.48
ph: 8
evaporation rate & reference: 1
solubility in water: neglegable
appearance and odor: aluminum paste, polysulfide odor
Stability indicator/materials to avoid: yes
strong oxidizing agents and strong acids
stability condition to avoid: open flame
hazardous decomposition products: h2s, co, co2, so2, smoke.
Waste disposal methods: react with curing agent and dispose as hazardous
waste, non-mix , non-hazardous.
Ingred name: liquid polysulfide polymer
cas: 68611-50-7
= wt: 71.
Health hazards acute and chronic: impairment of central nervous system.
effects of overexposure: sluggishness, sleeplessness and weakness in the
legs.
First aid: eyes-flush with large amouts of water, contact physician.
skin-wash with soap and water.
Melt/freeze pt: m.P/f.P text: *
vapor pres: nil
vapor density: nil
spec gravity: 2
ph: 9
evaporation rate & reference: nil
solubility in water: neglegable
appearance and odor: black paste, oily odor
Stability indicator/materials to avoid: yes
reducing agents & combustables, h2s, potassium azide.
stability condition to avoid: open flame
hazardous decomposition products: h2s, co, co2, so2, smoke.
Waste disposal methods: react with base component & dispose as solid
waste according to federal, state & local regulations.
Ingred name: liquid polysulfide polymer
cas: 68611-50-7
= wt: 65.
ingred name: manganese dioxide
cas: 1313-13-9
rtecs #: op0350000
= wt: 65.
osha pel: 5 mg/m3
acgih tlv: 5 mg/m3
Health hazards acute and chronic: possible skin irritation after
prolonged contact, with resulting dermatitis. not considered to be
a primary skin irritant.
effects of overexposure: skin or irritation.
First aid: eyes-flush with large amounts of water, consult physician.
skin-wash with soap and water. ingestion- induce vomiting,
consult physician.
Vapor pres: nil
vapor density: nil
spec gravity: 1.48
ph: 8
evaporation rate & reference: 1
solubility in water: neglegable
appearance and odor: aluminum paste, polysulfide odor
Stability indicator/materials to avoid: yes
strong oxidizing agents and strong acids
stability condition to avoid: open flame
hazardous decomposition products: h2s, co, co2, so2, smoke.
Waste disposal methods: react with curing agent and dispose as hazardous
waste, non-mix , non-hazardous.
Ingred name: liquid polysulfide polymer
cas: 68611-50-7
= wt: 71.
Routes of entry: inhalation: unknown skin: yes ingestion: yes
health hazards acute and chronic: eyes: it may cause irriation, redness
and tearing. Skin: allergic skin rash in sensitized individuals.
ingestion: may cause gastrointestinal irritation.
effects of overexposure: eyes: may cause burning, tearing and reddening.
skin: prolonged exposure may cause drying and cracking of skin, and
possible dermatitis. Inhalation: may cause dizziness, drowsiness
and fatigue. May ca use liver and kidney damage. Ingestion: may
cause drowsiness, dizziness and nausea.
medical cond aggravated by exposure: may cause disturbance in memory,
thinking ability, emotions and coordination.
First aid: eyes: flush with luke warm water for 15 minutes. If symptoms
persist, consult physician. Skin: wash with soap and water.
inhalation: remove to fresh air. Ingestion: consult a physician.
Vapor density: heavier
spec gravity: 1.377
voc pounds/gallon: 60
appearance and odor: grey liquid
percent volatiles by volume: 4.0%
Stability indicator/materials to avoid: yes
nk
Waste disposal methods: not a hazardous waste according to epa
regulations. Consult state regulations prior to disposal of
spillage.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: phenolic resin
cas: 009039-25-2
< wt: 5.
ingred name: titanium dioxide
cas: 013463-67-7
< wt: 5.
ingred name: caicium carbonate limestone
cas: 001317-65-3
= wt: 25.
ingred name: aluminum
cas: 007429-90-5
< wt: 5.
ingred name: toluvene
cas: 000108-88-3
< wt: 5.
ingred name: polysufide polymer
cas: 068611-50-7