NationalStockNumber.INFO
Worldwide distributor of NSN parts and consumables located in the USA.
Worldwide distributor of NSN parts and consumables located in the USA.
A chemical composition formulated for coating or for filling voids, cracks, joints or seams of objects and/or materials to exclude foreign matter and/or prevent the transmission of fluids therethrough. It is not designed to act as a primer coating or to be sanded or ground after application. It cannot be wiped off. For items which are specifically compounded to provide electrical insulating characteristics, use insulating compound, electrical. Excludes caulking compound; gasket cement; corrosion preventive compound; cement, iron and steel; plumbing fixture setting compound; preservative coating, rubber and textile treating compounds.
| Solicitation | Return by Date | Buyer Code | Quantity |
|---|---|---|---|
| SPE8ES20T3508 | 2020-03-23 | PEPCE | 99 KT |
| SPE8ES20T3030 | 2020-03-03 | PEPCE | 30 KT |
| SPE8ES20T1878 | 2020-01-14 | PEPCE | 36 KT |
| SPE8ES20T1591 | 2019-12-24 | PEPCE | 44 KT |
| SPE8ES19T7336 | 2019-08-14 | PEPCE | 57 KT |
| SPE8ES19T6499 | 2019-07-10 | PEPCE | 27 KT |
| SPE8ES19T4277 | 2019-04-08 | PEPCE | 54 KT |
| SPE8ES19T3480 | 2019-03-05 | PEPCE | 30 KT |
| SPE8ES19T1344 | 2018-11-28 | PEPCE | 24 KT |
| SPE8ES18T3933 | 2018-03-12 | PEPCE | 109 KT |
Send us a request for quote using the form below. Our team will contact you with an up to date pricing and availability quote ASAP.
Caulking compounds
Glaziers' putty; grafting putty; resin cement, caulking compounds and other mastics; painters' fillings; nonrefractory surfacing preparations
Shingles, molding, wallboard
Y - Indicates information is in the hazardous materials information resource system (hmirs).
PMICA - Item does not contain precious metal.
CRITL- The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
149610 - Caulking/glaziers compounds noi
620 - Paint, in individual containers less than 10 cubic ft
9 - Other or no special handling required (sh)
A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
B - Construction materials: includes paint and related materials, prefabricated building, wood products, metal and composition mater
T - 55.0
Z - No special type of cargo code applicable
Questions & Answers: |
|
| What are the historical prices recorded for this stock number? | |
| Historical data shows pricing from $86.39 to $143.98.. | |
| Does NSN 8030-00-903-6545 have a shelf life? | |
| No. There is no shelf life applicable for this NSN. | |
| What NATO entities are users of this NSN? | |
| Department Of The Air Force, Department Of The Navy, General Services Administration, Poland, Brazil, Spain, Singapore, Australia, Belgium, Canada, United Kingdom, Netherlands, Greece, and Turkey | |
| What is the NIIN of NSN 8030-00-903-6545? | |
| 009036545 or 00-903-6545 | |
| Does NSN 8030-00-903-6545 require demilitarization? | |
| Yes - ITAR Controlled | |
| What is the most recent solicitation for NSN 8030-00-903-6545? | |
| Solicitation SPE8ES20T3508 for qty 99 on 03/16/2020 | |
| When was this national stock number assigned to the federal catalog? | |
| Jan 01, 1960 | |
Effects of overexposure: eye/skin contact: irritation,may cause injury or
burns
First aid: skin: remove by washing first with alcohol and then with soap
and water.Eyes: flush w/water for 15 min,consult dr.
Hcc: n1
spec gravity: 1.32
evaporation rate & reference: >0.01
solubility in water: negligible
appearance and odor: white paste with no odor.
Stability indicator/materials to avoid: yes
strong oxidizing agents
hazardous decomposition products: thermal decomposition may product co
and/or co*2
Waste disposal methods: incinerate in a furnace or dispose of iaw all
federal,state and local regs.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: epoxy resin
fraction by wt: 60%
ingred name: hydrous calcium magnesium silicates
fraction by wt: 40%
Ld50 lc50 mixture: oral ld50(rat): 11400 mg/kg(epoxy resin)*
routes of entry: inhalation: no skin: yes ingestion: no
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: approximately 1 % of workers may
become sensitized by too much skin contact with epoxy resins;
itching, swelling, or rashes may then result from further contact.
explanation of carcinogenicity: *dermal ld50 (rabbit): >2000 mg/kg
(epoxy resin); inhalation lc50 (rat): no deaths-saturated air;
exposure time 8 hours.
effects of overexposure: eye: mild irritation. Metal filler particles
could scratch cornea. Skin: minimal to mild irritation in most
people. Inhalation: unlikely. No data on symptoms found. Ingestion:
all ingredients are of l ow acute oral toxicity. No data found on
specific symptoms.
medical cond aggravated by exposure: allergies, eczema, and other skin
disorders.
First aid: eyes: flush with clean water for 15 minutes while gently
holding lids open. Get med aid. Skin: wash thoroughly with soap and
warm water. Consult physician if irritation develops. Inhalation:
move pati ent to fresh air. Administer oxygen if breathing is
difficult. Get med aid. Ingestion: do not induce vomiting. Dilute
with 2 glasses of water and get med aid.
Vapor pres: nil @ 78f
vapor density: >1 (air=1)
spec gravity: 2.8
ph: 7.0
evaporation rate & reference:
solubility in water: nil
appearance and odor: dary grey paste with little odor
Stability indicator/materials to avoid: yes
strong acids, bases and oxidizers
stability condition to avoid: open flame and extreme heat
hazardous decomposition products: oxides of carbon; aldehydes and acids
from incomplete combustion
conditions to avoid polymerization: heat is released when this resin is
mixed with epoxy hardener. Use caution when mixing a pound or more.
Waste disposal methods: the resin contains no rcra or cercla listed
hazardous wastes. Dispose of in accordance with applicable state
and local regulation.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: bisphenol a diglycidyl ether resin (moderate skin
sensitizer)
cas: 25068-38-6
fraction by wt: 10-30%
other rec limits: none specified
ingred name: voc : 0 g/l
other rec limits: none specified
Ld50 lc50 mixture: oral ld50(rat): 2460mgkg(teta)2140mg/kg *
routes of entry: inhalation: yes skin: yes ingestion: yes
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: repeated skin contact or inhalation if
fumes can cause sensitization, with itching, rashes, or swelling of
the skin or an asthma-like respiratory reaction on later exposure
to the product.
explanation of carcinogenicity: *(aep) dermal ld50 (rabbit): 820 mg/kg
(teta); 880 mg/kg (aep)
effects of overexposure: eye: severe irritation or burns. Skin: severe
irritation or burns. Inhalation: irritation of nose and throat;
nausea and vomiting in severe cases. Ingestion: may cause burns of
mouth and throat and ga strointestinal irritation or ulceration.
medical cond aggravated by exposure: asthma, bronchitis, or skin
irritations
First aid: eye: immediately flush w/clean water 15 minutes hold lids
open. Get med aid. Skin: immed remove contaminated
clothing/shoes/wash w/soap/warm water. See dr. If irritation
develops. Inhale: move patient to fresh air. Give
oxygen/artificial respiration if needed. See dr. If symptoms
persist. Ingest: corrosive-do not induce vomiting. Dilute
w/milk/water get immed med aid.
Boiling pt: b.P. Text: >450f,>232c
vapor pres:
vapor density: >1 (air=1)
spec gravity: 0.98
ph: 10-11
evaporation rate & reference:
solubility in water: 30-60%
appearance and odor: white paste with mild ammonia-like odor
Stability indicator/materials to avoid: yes
strong oxidizers, acids, and chlorinated organic compounds
stability condition to avoid: extreme heat or open flame
hazardous decomposition products: acrid and toxic fumes with organic
amines, ammonia, oxides of carbon and nitrogen
conditions to avoid polymerization: heat is released when this product
is mixed with epoxy resins; use care when mixing large quantities.
Waste disposal methods: keep out of public water supplies. Incinerate in
approved facility where permitted by state and local regulation.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: triethylenetetramine (teta) (severe skin and eye irritant;
respiratory irritant; sensitizer)
cas: 112-24-3
rtecs #: ye6650000
fraction by wt: 30-60%
other rec limits: none specified
ingred name: polyamide of c*18 fatty acid primers and teta (severe eye
irritant)
cas: 68410-23-1
fraction by wt: 30-60%
other rec limits: none specified
ingred name: aminoethyl piperazine adduct (skin irritant; eye irritant)
cas: 70776-30-6
fraction by wt: 10-30%
other rec limits: none specified
ingred name: aminoethylpiperazine (aep) severe skin irritant; severe eye
irritant)
cas: 140-31-8
rtecs #: tk8050000
fraction by wt: 1-5%
other rec limits: none specified
ingred name: nonyl phenol (severe skin irritant; severe eye irritant)
cas: 25154-52-3
rtecs #: sm5600000
fraction by wt: 1-5%
other rec limits: none specified
ingred name: voc : 0 lbs/gl
other rec limits: none specified
Ld50 lc50 mixture: oral ld50 (rat): 11400 mg/kg-epoxy resin
routes of entry: inhalation: no skin: yes ingestion: no
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: may be mildly irritating to the eyes.
metal filler particles could scratch cornea. Skin contact may cause
minimal to mild irritation in most people. Approximately 1% of
workers may become sensitized b y too much skin contact with epoxy
resins; itching, swelling, or rashes may then result from further
contact.
explanation of carcinogenicity: this compound contains no ingredients at
concentrations of 0.1% or greater that are carcinogens or suspect
carcinogens.
effects of overexposure: eye irritation, skin irritation, itching,
swelling of skin, rashes.
medical cond aggravated by exposure: pre-existing allergies, eczema,
skin disorders may be aggravated by exposure to this product.
First aid: eyes: flush with water for 15 minutes while holding eyelids
open. Get medical attention. Skin: remove contaminated clothing.
wash with soap and water. If irritation persists, get medical
attention. In halation: remove to fresh air. Restore breathing. Get
medical attention. Ingestion: do not induce vomiting. Dilute with
two glasses of water. Get medical attention.
Hcc: n1
boiling pt: b.P. Text: not given
melt/freeze pt: m.P/f.P text: not given
vapor pres: nil
vapor density: > 1
spec gravity: 2.8
ph: 7.0
evaporation rate & reference:
solubility in water: nil
appearance and odor: dark grey paste with little odor
percent volatiles by volume: o %
Stability indicator/materials to avoid: yes
strong oxidizing agents, acids, bases
stability condition to avoid: extreme heat, open flame
hazardous decomposition products: carbon monoxide, carbon dioxide,
aldehydes and acids from incomplete combustion
conditions to avoid polymerization: heat is released when this resin is
mixed with epoxy hardener. Use caution when mixing a pound or more.
Waste disposal methods: prevent waste from contaminating surrounding
environment. Discard any product, residue, disposal container or
liner in accordance with all federal, state and local regulations.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: bisphenol a-epichlorohydrin copolymer
cas: 25068-38-6
rtecs #: sl6475000
fraction by wt: 10-30% %
other rec limits: none recommended
ingred name: non-hazardous ingredients
fraction by wt: balance
other rec limits: none recommended