NationalStockNumber.INFO
Worldwide distributor of NSN parts and consumables located in the USA.
Worldwide distributor of NSN parts and consumables located in the USA.
A chemical composition formulated for coating or for filling voids, cracks, joints or seams of objects and/or materials to exclude foreign matter and/or prevent the transmission of fluids therethrough. It is not designed to act as a primer coating or to be sanded or ground after application. It cannot be wiped off. For items which are specifically compounded to provide electrical insulating characteristics, use insulating compound, electrical. Excludes caulking compound; gasket cement; corrosion preventive compound; cement, iron and steel; plumbing fixture setting compound; preservative coating, rubber and textile treating compounds.
| Solicitation | Return by Date | Buyer Code | Quantity |
|---|---|---|---|
| SPE8ES18T6797 | 2018-06-12 | PEPCE | 1 KT |
| SPE8E515T7860 | 2015-06-08 | PEPCF | 10 KT |
The last inventory check on this NSN was done on 06/30/2023. Due to rapid changes in inventory this may not be the current stock qty.
Send us a request for quote using the form below. Our team will contact you with an up to date pricing and availability quote ASAP.
Caulking compounds
Glaziers' putty; grafting putty; resin cement, caulking compounds and other mastics; painters' fillings; nonrefractory surfacing preparations
Shingles, molding, wallboard
Y - Indicates information is in the hazardous materials information resource system (hmirs).
PMICA - Item does not contain precious metal.
CRITL- The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
149610 - Caulking/glaziers compounds noi
620 - Paint, in individual containers less than 10 cubic ft
9 - Other or no special handling required (sh)
A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
B - Construction materials: includes paint and related materials, prefabricated building, wood products, metal and composition mater
T - 55.0
W - Corrosive materials, un class 8 (corrosive label)
Questions & Answers: |
|
| What are the historical prices recorded for this stock number? | |
| Historical data shows pricing from $186.22 to $310.37.. | |
| Does NSN 8030-00-998-3321 have a shelf life? | |
| No. There is no shelf life applicable for this NSN. | |
| What NATO entities are users of this NSN? | |
| Department Of The Air Force, Department Of The Navy, National Aeronautics and Space Administration, General Services Administration, and Greece | |
| What is the NIIN of NSN 8030-00-998-3321? | |
| 009983321 or 00-998-3321 | |
| Does NSN 8030-00-998-3321 require demilitarization? | |
| Yes - ITAR Controlled | |
| What is the most recent solicitation for NSN 8030-00-998-3321? | |
| Solicitation SPE8ES18T6797 for qty 1 on 06/07/2018 | |
| When was this national stock number assigned to the federal catalog? | |
| Apr 18, 1967 | |
Routes of entry: inhalation: no skin: no ingestion: no
effects of overexposure: contact with skin or eyes may cause irritation.
First aid: in case of skin contact wash with soap and water at first
opportunity. In case of eye contact flush with copious amounts of
water for 15 minutes.
Boiling pt: b.P. Text: na
melt/freeze pt: m.P/f.P text: 0
vapor pres: nil
vapor density: na
spec gravity: 1.6
evaporation rate & reference: >1
solubility in water: insoluble
appearance and odor: white high viscosity liquid, very slight odor
Stability indicator/materials to avoid: yes
strong oxidizing agents
stability condition to avoid: na
hazardous decomposition products: carbon monoxide, aldehyydes
conditions to avoid polymerization: do not mix large amounts of epoxy
resin with diethylenetriamine without recognition of development of
exothermic heat.
Waste disposal methods: this is not a hazardous material under the
resource conservation and recovery act. (rcra).
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: magnesium silicate hydrate
cas: 1343-90-4
rtecs #: om4360000
fraction by wt: 46%
acgih tlv: 2 mg/m3
ingred name: bis phenol a-epichloronydrin epoxy resin
fraction by wt: 50%
ingred name: titanium dioxide
cas: 13463-67-7
rtecs #: xr2275000
fraction by wt: 2%
osha pel: 15 mg/m3 tdust
acgih tlv: 10 mg/m3 tdust; 9293
Routes of entry: inhalation: yes skin: yes ingestion: yes
health hazards acute and chronic: this is a strong sensitizer. Vapor may
cause irritation of the lungs. Nose, throat, and eyes. Contact may
cause skin and eye burns. No know chronic exposure hazards.
effects of overexposure: vapor may cause irritation to lungs, nose,
throat, and eyes. It may cause coughing and sneezing. Contact may
cause skin and eye burns.
medical cond aggravated by exposure: any pre-existing respiratory, eye
or skin disorder may be at increased risk from exposure.
First aid: in case of skin contact wash with soap and water immediately.
in case of eye contact flush with copious amounts of water for 15
minutes. Consult a physician.
Boiling pt: b.P. Text: 404f
melt/freeze pt: m.P/f.P text: nil
vapor pres:
vapor density: 3.5
spec gravity: 1.65
evaporation rate & reference: na
solubility in water: partial
appearance and odor: tan, high viscosity liquid, strong ammonia-like
odor
Stability indicator/materials to avoid: yes
avoid contamination with strong acids
stability condition to avoid: na
hazardous decomposition products: thermal decomposition may produce
hydrogen cyanide, nitrogen oxides, co and co2.
conditions to avoid polymerization: do not mix large batches of epoxy
resin and diethylenetriamine without recognition of development of
exothermic heat.
Waste disposal methods: controlled inceneration or put in metal
container for landfill burial. Solidify by mixing with part a
(resin) before landfill. This is not a hazardousmaterial under
(rcra).
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: diethylene triamine
cas: 111-40-0
rtecs #: ie1225000
fraction by wt: 12%
osha pel: 1 ppm
acgih tlv: s, 1 ppm; 9192
ingred name: magnesium silicate hydratet)
cas: 1343-90-4
rtecs #: om4360000
fraction by wt: 42%
acgih tlv: 2 mg/m3
ingred name: silica
fraction by wt: 15%
acgih tlv: .1 mg/m3
ingred name: diethylenetriamine epichlorohydrin bis phenol a adduct.
fraction by wt: 30%
Routes of entry: inhalation: yes skin: yes ingestion: no
health hazards acute and chronic: brief contact may irritate the skin or
cause a rash. Repeated or prolonged skin contact may result in
allergic sensitization. *do not heat mixed adhesive unless
curing surfaces to be bonded. Fa ilure to observe these precautions
may result in excessive heat build-up causing an exotherm. The
exotherm has the**
explanation of carcinogenicity: component 1: not classified as a human
carcinogen (group 3) per iarc.
effects of overexposure: skin rash, irritation.
**potential for release of toxic gasses.
medical cond aggravated by exposure: skin sensitization.
First aid: eye: flush eyes with water for 15 minutes. If irritation
persists, get medical attention. Skin: wash skin thoroughly with
soap and water. If irritation persists, get medical attention.
inhalation: rem ove victim to fresh air. If symptoms persist, get
medical attention. Ingestion: drink plenty of water. Get medical
attention immediately.
Boiling pt: b.P. Text: >500f,>260c
decomp temp: decomp text: not tested
spec gravity: 1.57
viscosity:
solubility in water: negligible
appearance and odor: white, high viscosity liquid; mild odor.
percent volatiles by volume:
Stability indicator/materials to avoid: yes
strong oxidizing agents, strong lewis or mineral acids.
stability condition to avoid: avoid mixing resin (part a) & curing agent
(part b) in batches greater than 1 lb unless you plan to use
immediately.*
hazardous decomposition products: co, nox, aldehydes, acids and
undetermined organics.
Waste disposal methods: incineration in an epa-approved waste
incinerator is a preferred disposal practice. Chem additions,
processing or otherwise altering this material may make the waste
mgmt info incomplete/inaccurate/in appropriate. State and local
requirements for***
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: talc
cas: 14807-96-6
rtecs #: mw2700000
fraction by wt: 40-70%
other rec limits: none specified
osha pel: 0.2 fibers/cc
acgih tlv: 0.2 fibers/cc
ingred name: bisphenol a/epichlorohydrin epoxy resin
cas: 25068-38-6
rtecs #: kc2100000
fraction by wt: 40-70%
other rec limits: none specified
ingred name: voc: 10 g/l (estimate)
rtecs #: 9999999vo
other rec limits: none specified
Routes of entry: inhalation: yes skin: yes ingestion: no
health hazards acute and chronic: material is corrosive to eyes and
skin. Brief contact may cause chemical burns. Vapors and mists will
irritate nose and throat. Repeated or prolonged skin contact may
result in burns and possible alle rgic sensitization.
explanation of carcinogenicity: component 1: not classified as a human
carcinogen (group 3) per iarc.
effects of overexposure: skin or eye irritation, chest discomfort.
*do not heat mixed
adhesive unless curing surfaces to be bonded. Failure to observe
these precautions may r esult in excessive heat build-up causing an
exotherm. The exotherm has the potential for release of toxic
gasses.
medical cond aggravated by exposure: skin sensitization.
First aid: eye: flush eyes with running water for 15 minutes. Get
medical attention. Skin: wash skin thoroughly with soap and water.
if irritation persists, get medical attention. Inhalation: remove
victim to fr esh air. If symptoms persist, get medical attention.
ingestion: drink plenty of water. Get medical attention
immediately.
Boiling pt: b.P. Text: 404f,207c
decomp temp: decomp text: not tested
vapor pres: nil
vapor density: 3.5
spec gravity: 1.65
viscosity: 8000-10000,
solubility in water: partial
appearance and odor: tan, high viscosity liquid, with strong
ammonia-like odor.
percent volatiles by volume:
Stability indicator/materials to avoid: yes
strong oxidizing agents, strong lewis or mineral acids.
stability condition to avoid: avoid mixing resin (part a) & curing agent
(part b) in batches greater than 1 lb unless you plan to use
immediately.*
hazardous decomposition products: co, nox, aldehydes, acids and
undetermined organics.
Waste disposal methods: incineration in an epa-approved waste
incinerator is a preferred disposal practice. Chem additions,
processing or otherwise altering this material may make the waste
mgmt info incomplete/inaccurate/in appropriate. State and local
requirements for***
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: talc
cas: 14807-96-6
rtecs #: mw2700000
fraction by wt: 40-70%
other rec limits: none specified
osha pel: 2 mg / m 3
acgih tlv: 2 mg / m 3
ingred name: diethylene triamine
cas: 111-40-0
rtecs #: ie1225000
fraction by wt: 10-30%
other rec limits: none specified
osha pel: 1 ppm
acgih tlv: 1 ppm
ingred name: bisphenol a/epichlorohydrin epoxy resin
fraction by wt: 10-30%
other rec limits: none specified
ingred name: silica, crystalline
cas: 14808-60-7
rtecs #: vv7330000
fraction by wt: 10-30%
other rec limits: none specified
osha pel: see table z3
acgih tlv: 0.1 mg/m3 rdust;9293
ingred name: voc:
rtecs #: 9999999vo
other rec limits: none specified
Routes of entry: inhalation: no skin: no ingestion: no
health hazards acute and chronic: may be mildly irritating to skin.
effects of overexposure: contact with skin or eyes may cause irritation.
medical cond aggravated by exposure: none known.
First aid: in case of skin contact wash with soap at first opportunity.
in case of eye contact flush with copious amounts of water for 15
minutes.
Melt/freeze pt: m.P/f.P text: 0f,-18c
vapor pres: nil
spec gravity: 1.6 (water=1)
evaporation rate & reference: >1 (bu ac=1)
solubility in water: insoluble
appearance and odor: white high viscous liquid, very slight odor.
Stability indicator/materials to avoid: yes
strong oxidizing agents.
hazardous decomposition products: carbon monoxide, aldehydes.
conditions to avoid polymerization: do not mix large amounts of epoxy
resin with diethylenetriamine without recognition of development of
exothermic heat.
Waste disposal methods: this is not a hazardous material under the
resource conservation and recovery act (rcra).
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: magnesium silicate hydrate
cas: 1343-90-4
rtecs #: om4360000
fraction by wt: 46%
other rec limits: none specified
acgih tlv: 2 mg/m3
ingred name: bis pnenol a-epichloronydrin epxy resin
fraction by wt: 50%
other rec limits: none specified
ingred name: titanium dioxide
cas: 13463-67-7
rtecs #: xr2275000
fraction by wt: 2%
other rec limits: none specified
osha pel: 15 mg/m3 tdust
acgih tlv: 10 mg/m3 tdust; 9293
Routes of entry: inhalation: yes skin: no ingestion: yes
health hazards acute and chronic: this is a strong sensitizer. Vapor may
cause irritation of lung, nose, throat, and eyes. Contact may cause
skin and eye burns. No known chronic exposure hazards.
effects of overexposure: vapor may cause irritation to lungs, nose,
throat, and eyes. It may cause coughing and sneezing. Contact may
cause skin and eye burns.
medical cond aggravated by exposure: any preexisting respiratory, eye or
skin disorder may be at increased risk from exposure.
First aid: in case or skin contact wash immediately with soap and water.
in case of eye contact flush with copious amounts of water for at
least 15 mins. Consult a physician.
Boiling pt: b.P. Text: 404f,207c
melt/freeze pt: m.P/f.P text: nil
vapor pres:
vapor density: 3.5
spec gravity: 1.65 (water=1)
solubility in water: partial
appearance and odor: tan, high viscosity liquid, strong ammonia-like
odor.
Stability indicator/materials to avoid: yes
avoid contamination with strong acids.
hazardous decomposition products: thermal decomposition may produce
hydrogen cyanide, nitrogen oxides, co and co2.
conditions to avoid polymerization: do not mix large batches of epoxy
resin & diethylenetriamine without recognition of development of
exothermic heat.
Waste disposal methods: controlled incineration or put in metal
container for landfill burial. Solidify by mixing with part a
(resin) before landfill. This is not a hazardous material under
(rcra)
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: diethylenetriamine
cas: 111-40-0
rtecs #: ie1225000
fraction by wt: 12%
other rec limits: none specified
acgih tlv: 1 ppm
ingred name: magnesium silicate hydrate
cas: 1343-90-4
rtecs #: om4360000
fraction by wt: 42%
other rec limits: none specified
acgih tlv: 2 mg/m3
ingred name: silica
fraction by wt: 15%
other rec limits: none specified
acgih tlv: 0.1 mg/m3
ingred name: diethylenetriamine epichlorohydrin bis phenol a adduct
fraction by wt: 30%
other rec limits: none specified
Routes of entry: inhalation: no skin: no ingestion: no
health hazards acute and chronic: may be mildly irritating to skin.
effects of overexposure: contact with skin or eyes may cause irritation.
medical cond aggravated by exposure: none known
First aid: in case of skin contact wash with soap and water ato first
opportunity. In case of eye contact flush with copious amounts of
water for 15 minutes.
Melt/freeze pt: m.P/f.P text: 0
vapor pres: nil
spec gravity: 1.6
evaporation rate & reference: >1
solubility in water: insoluble
appearance and odor: white high viscosity liquid, very slight odor.
Stability indicator/materials to avoid: yes
strong oxidizing agents
hazardous decomposition products: carbon monoxide, aldehydes
conditions to avoid polymerization: do not mix large amounts of epoxy
resin with diethylenetriamine w/o recognition of development of
exothermic heat.
Waste disposal methods: this is not a hazardous material under the
resource conservation and recovery act.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: magnesium silicate hydrate
cas: 1343-90-4
rtecs #: om4360000
fraction by wt: 46%
other rec limits: none specified
acgih tlv: 2 mg/m3
ingred name: bis phenol a-epichlorohydrin epoxy resin
fraction by wt: 50%
other rec limits: none specified
ingred name: titanium dioxide
cas: 13463-67-7
rtecs #: xr2275000
fraction by wt: 2%
other rec limits: none specified
osha pel: 15 mg/m3 tdust
acgih tlv: 10 mg/m3 tdust; 9293
Routes of entry: inhalation: yes skin: no ingestion: no
health hazards acute and chronic: this is a strong sensitizer. Vapor may
cause irritation of the lungs, nose, throat and eyes. Contact may
cause skin and eye burns. No known chronic exposure hazards.
effects of overexposure: vapor may cause irritation to lungs, nose,
throat, eyes. It may cause coughing and sneezing. Contact may cause
skin and eye burns.
medical cond aggravated by exposure: any pre-existing respiratory, eye
or skin disorder may be at increased risk for exposure.
First aid: in case of skin contact wash immediately with soap and water.
in case of eye contact flush with copious amounts of water for at
least 15 minutes. Consult a physician.
Boiling pt: b.P. Text: 404f,207c
melt/freeze pt: m.P/f.P text: nil
vapor pres:
vapor density: 3.5(air=1)
spec gravity: 1.65
solubility in water: partial
appearance and odor: tan, high viscosity liquid, strong ammonia-like
odor
Stability indicator/materials to avoid: yes
avoid contaminated with strong acids
hazardous decomposition products: thermal decomposition may produce
hydrogen cyanide, nitrogen oxides, carbon monoxide and carbon
dioxide
conditions to avoid polymerization: do not mix large batches of epoxy
resin and diethylenetriamine w/o recognition of development of
exothermic heat.
Waste disposal methods: controlled incineration or put in metal
container for landfill burial. Solidify by mixing with part a
(resin) before landfill.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: diethylenetriamine
cas: 111-40-0
rtecs #: ie1225000
fraction by wt: 12%
other rec limits: none specified
acgih tlv: 1 ppm
ingred name: magnesium silicate hydrate
cas: 1343-90-4
rtecs #: om4360000
fraction by wt: 42%
other rec limits: none specified
acgih tlv: 2 mg/m3
ingred name: silica
fraction by wt: 15%
other rec limits: none specified
acgih tlv: 0.1 mg/m3
ingred name: diethylenetriamine epichlorohydrin bis phenol a adduct
fraction by wt: 30%
other rec limits: none specified
Routes of entry: inhalation: yes skin: yes ingestion: yes
reports of carcinogenicity: ntp: yes iarc: yes osha: no
health hazards acute and chronic: eye: may be moderately irrit may cause
thermal burns at high temps. Skin: may be moderately irrit may
cause skin sensitization.May cause thermal burns at high temps.
ingest: assumed low order acute ora l toxicity. Inhal: chronic may
cause scarring of lungs w/cough/shortness of breath. Delayed lung
injury, silicosis-**
explanation of carcinogenicity: quartz cristylline syllica is listed as
a group 2 carcinogenprobably carcenogenic to humans by iarc.
effects of overexposure: irrit as noted skin sensitization. Alergy may
be evidenced by rashes especially hives.
**disabling/progressive/sometimes fatal pulmonary fibrosis (typical
nodulation of lungs)
medical cond aggravated by exposure: preexisting skin/eye disorders may
be aggravated by exposure to prod.
First aid: eye: flush w/water for 15 min holding eyelids open get med
aid. If contact w/hot prod occurs immed flush w/cool water 15 min.
get med aid. Skin: remove contam clothes shoes/wipe off excess from
skin fl ush w/water follow by washing w/soap &water. If irrit
occurs get med aiddo not reuse clothes until cleaned. Contam
leather art incl shoes cannot be decontaminated destroy to prevent
reuse. ***
Boiling pt: b.P. Text: >500f,>260c
vapor pres: nil
vapor density: na
spec gravity: 1.57
evaporation rate & reference: na
solubility in water: insoluble.
appearance and odor: white high viscosity liq. Mild odor.
percent volatiles by volume: 0%
Stability indicator/materials to avoid: yes
nk *considerable heat is released.
stability condition to avoid: can react vigorously w/strong oxidizing
atents & strong lewis or mineral acids in reactions w/many curing
agents *
hazardous decomposition products: carbon monoxide, aldehydes, acids &
heat.
Waste disposal methods: clean up and disposal should be in accordance
w/federal.State/local environmental control regulations.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: silica, crystalline - quartz group 2a carcinigen prob.
carginic to humans by iarc.
cas: 14808-60-7
rtecs #: vv7330000
fraction by wt: .581%
other rec limits: none recommended
osha pel: 0.1mg/m3
acgih tlv: 0.1 mg/m3 rdust;
ingred name: epoxy resins
cas: 25068-38-6
rtecs #: sl6475000
fraction by wt: 30-60%
other rec limits: none recommended
Ld50 lc50 mixture: 0.3 mg/m3 tdust 0.1 mg/m3 rdust *
routes of entry: inhalation: yes skin: yes ingestion: yes
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: inhal. Chronic overexp to free sillica
dust above tlv may cause scarring of lungs w/coughing,shortness of
breath,delayed lung injury silicosis may result from breathing free
sillica-sillicosis is a di sabling/progressive/sometimes fatal
pulmonary fibrosis characterized typical nodulation in lungs. **
effects of overexposure: irrit as noted skin sensitization may be
evidenced by rashes or hives. **may cause resp sensitization,
athsma in susceptible people. Overexp may cause irrit to upper resp
tract. Eye: severe irrit w/cor neal injury may result in perm
impairment of vision, blindness. Vapors may irrit eyes/skin: ***
medical cond aggravated by exposure: preexisting skin & eye disorders
may be aggravated by exp to prod preexisting skin/lung alergies may
increase chance of developing increased allergic symptoms from exp
to prod.
First aid: eyes: wash w/lg amts of water for 15-30 min if irrit
persists. Skin: flush skin w/lg amts water for >15 min remove contam
clothing under safety shower. Get med aid. Avoid prolonged contact
w/prod. Wash throughly after handling. Wash all clothing do not
reuse clothes until cleaned. If leather artic can't be decom
destroy. If clothes are stuck to burn area, cut around,do not pull
off. **
Boiling pt: b.P. Text: 404f,207c
vapor pres:
vapor density: 3.5
spec gravity: 1.65
evaporation rate & reference: na
solubility in water: partial.
appearance and odor: tan high viscosity liq. W/strong amonia like odor.
percent volatiles by volume: nil
Stability indicator/materials to avoid: yes
avoid contamination w/strong acids.
stability condition to avoid: none
hazardous decomposition products: thermal decomp may produce hydrogen
cyanide, nitrogen oxidescarbon monoxide & carbon dioxide.
conditions to avoid polymerization: do not mix lg batches of epoxy resin
& dta w/o recognition of development of exothermic heat.
Waste disposal methods: na
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: silica, crystalline - quartz
cas: 14808-60-7
rtecs #: vv7330000
fraction by wt: 15.602%
other rec limits: none recommended
acgih tlv: 0.3mg/m3
ingred name: diethylenetriamine
cas: 111-40-0
rtecs #: ie1225000
fraction by wt: 10-30%
other rec limits: none recommended
acgih tlv: 1 ppm
ingred name: epoxy resins
cas: 25068-38-6
rtecs #: sl6475000
fraction by wt: 10-30%
other rec limits: none recommended
Routes of entry: inhalation: yes skin: yes ingestion: yes
health hazards acute and chronic: eye: may cause severe irritation with
corneal injury which may result in permanent impairment of vision,
even blindness. Vapors may irritate eyes. Skin contact: short
single exposure may cause severe skin burns. Has caused allergic
skin reactions in humans. skin absorption: a single prolonged
exposure may result in the material being absorbed in harmful
amounts. The ld 50 for skin absorption in r abbits is 1000 mg/kg.
ingestion: single dose oral toxicity is low. The oral ld 50 for
rats is between 1800-2330 mg/kg. Ingestion may cause
gastrointestinal irritation or ulceration. Ingestion may caus e
burns of mouth and throat.
effects of overexposure: inhalation: may cause respiratory sensitization
or asthma in susceptible individuals. Excessive exposure may cause
irritation to upper respiratory tract.
First aid: eyes: immediate and continuos irrigation with flowing water
for at least 30 minutes. Is imperative. Prompt medical consultation
is essential. Skin: immediately flush skin with plenty of water for
at least 15 minutes. While removing contaminated clothing,
preferably under safety shower seek medical attention immediately.
ingestion: do not induce vomiting. Give large amounts of water or
milk if ava ilable and transport to medical facility. Inhalation:
remove to fresh air if effects occur. Consult a physician.
Boiling pt: =206.7c, 404.F
vapor pres:
vapor density: 3.5
spec gravity: 1.65
ph: >8 (alkaline)
solubility in water: partial
appearance and odor: tan, high viscosity liquid with strong ammonia-like
odor.
Stability indicator/materials to avoid: yes
strong alkalies and acids.
stability condition to avoid: high temperatures, sparks, and open flames
hazardous decomposition products: carbon monoxide and carbon dioxide
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: crystalite ss
cas: 14808-60-7
rtecs #: vv7330000
= wt: 15.6
osha pel: see table z-3
acgih tlv: 0.1 mg/m3
ingred name: diethylenetriamine
cas: 111-40-0
rtecs #: ie1225000
minumum % wt: 10.
maxumum % wt: 30.
acgih tlv: 4.2 mg/m3;1 ppm
ingred name: bisphenol a epoxy resin
cas: 25068-38-6
rtecs #: ce6880000
minumum % wt: 10.
maxumum % wt: 30.
Routes of entry: inhalation: yes skin: yes ingestion: yes
health hazards acute and chronic: eye contact: product may be moderately
irritating to the eyes. Contact with product at elevated
temperatures can result in thermal burns. Skin contact: product may
be moderately irritating to the ski n. Inhalation: because of its
low volatility, this product is not likely to be an inhalation
hazard. Ingestion: based on similar product testing product is
presumed to have a low order of acute oral t oxicity.
explanation of carcinogenicity: the international agency for research on
cancer (iarc) has classified crystalline silica as a probable
carcinogen. The national toxicology program (ntp) has included
crystalline silica on the ntp list of carcinogens.
effects of overexposure: irritation as noted. Skin sensitization
(allergy) may be evidenced by rashesm espeecially hives.
medical cond aggravated by exposure: preexisting skin and eye disorders
may be aggravated by exposure to this product. Preexisting skin or
lung allergies may increase the chance of developing increased
allergy symptoms from exposure to thi
First aid: eye contact: flush with water for 15 minutes while holding
eyelids open. Get medical attention. Skin contact: remove
contaminated clothing/shoes and wipe off excess from skin. Flush
with water. Follow by washing with soap and water. Get medical
attention. Inhalation: remove victim to fresh air and provide
oxygen if breathing is difficult. Get medical attention. Ingestion:
do not induce vomiting. I n general, no treatment is necessary
unless large quantities of product are ingested.
Boiling pt: >260.C, 500.F
vapor pres: nil
spec gravity: 1.57
solubility in water: insoluble
appearance and odor: white, high viscosity liquid; mild odor.
Stability indicator/materials to avoid: yes
strong acids, amines, mercaptans, bases.
stability condition to avoid: can react vigorously with strong oxidizing
agents and strong lewis or mineral acids, in reactions with many
curing agents, considerable heat is released.
hazardous decomposition products: carbon monoxide, aldehydes and acids
may be formed during combustion. Reaction with some curing agents
may produce considerable heat.
conditions to avoid polymerization: will not occur.
Waste disposal methods: cleanup and disposal should be in accordance
with federal, state and local environmental control regulations.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: quartz
cas: 14808-60-7
rtecs #: vv7330000
= wt: .58
osha pel: see table z-3
acgih tlv: 0.1 mg/m3
ingred name: bisphenol a epoxy resin
cas: 25068-38-6
rtecs #: ce6880000
minumum % wt: 30.
maxumum % wt: 60.