Worldwide distributor of NSN parts and consumables located in the USA.
A chemical composition formulated for coating or for filling voids, cracks, joints or seams of objects and/or materials to exclude foreign matter and/or prevent the transmission of fluids therethrough. It is not designed to act as a primer coating or to be sanded or ground after application. It cannot be wiped off. For items which are specifically compounded to provide electrical insulating characteristics, use insulating compound, electrical. Excludes caulking compound; gasket cement; corrosion preventive compound; cement, iron and steel; plumbing fixture setting compound; preservative coating, rubber and textile treating compounds.
The last inventory check on this NSN was done on 05/12/2024. Due to rapid changes in inventory this may not be the current stock qty.
Send us a request for quote using the form below. Our team will contact you with an up to date pricing and availability quote ASAP.
Caulking compounds
Glaziers' putty; grafting putty; resin cement, caulking compounds and other mastics; painters' fillings; nonrefractory surfacing preparations
Shingles, molding, wallboard
Y - Indicates information is in the hazardous materials information resource system (hmirs).
PMICA - Item does not contain precious metal.
CRITL- The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
149610 - Caulking/glaziers compounds noi
620 - Paint, in individual containers less than 10 cubic ft
9 - Other or no special handling required (sh)
A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
B - Construction materials: includes paint and related materials, prefabricated building, wood products, metal and composition mater
T - 55.0
Z - No special type of cargo code applicable
Questions & Answers: |
|
What are the historical prices recorded for this stock number? | |
Historical data shows pricing from $466.72 to $777.87.. | |
Does NSN 8030-01-024-9574 have a shelf life? | |
No. There is no shelf life applicable for this NSN. | |
What NATO entities are users of this NSN? | |
General Services Administration, Poland, Spain, Australia, and Turkey | |
What is the NIIN of NSN 8030-01-024-9574? | |
010249574 or 01-024-9574 | |
Does NSN 8030-01-024-9574 require demilitarization? | |
Yes - ITAR Controlled | |
What is the most recent solicitation for NSN 8030-01-024-9574? | |
No solicitations for this NSN. | |
When was this national stock number assigned to the federal catalog? | |
Jul 23, 1976 |
Health hazards acute and chronic: acute;inhalation: respiratory tract
irritation, chest discomfort, bronchitis or asthma symptoms.
respiratory sensitization, may be severe in some cases.
eye: irritation upon direct contact. Skin: irritat ion upon direct
contact. May also trigger asthmatic attacks in sensitizated
individuals. Ingestion: harmful if swallowed.
effects of overexposure: chronic; skin contact: prolonged exposure may
result in skin sensitization. Inhalation: fibrosis and restricted
pulmonary function in workers. Mutagenic in some laboratory tests,
although this data ha s not been related to human exposures.
medical cond aggravated by exposure: sensitized individuals or
individuals suffering from astmatic or other chronic respiratory
conditions should not work in close proximity to areas where this
material is being used.
First aid: inhal: move to fresh air. If breathing labored/difficult,
give oxygen by trained personnel. If breathing stopped give
artificial respiration. Consult physician immediately. Respiratory
response may be delayed 4-8 hrs after exposure. Eye: immed flush
w/water 15 min, get med aid. Skin: remove contam clothing. Wash
w/water. Ingest: dilute w/water get immed med aid. Get med aid if
symptoms persist.
Boiling pt: b.P. Text: >350f,>177c
decomp temp: decomp text: >500f,>260c
vapor pres: 3 x 10-4
spec gravity: 1.2 (water=1)
solubility in water: reacts with water
appearance and odor: colorless to slightly yellow liquid; very slight,
if any, odor
percent volatiles by volume: neg
Stability indicator/materials to avoid: yes
water, strong bases, alcohols, metal compounds or surface active
agents.
stability condition to avoid: storage in open cntnrs, exposure to
heat/flame, uncontrolled mixing w/incompatible substances. Avoid
temps >120f.
hazardous decomposition products: carbon monoxide, oxides of nitrogen,
traces of hydrogen cyanide, isocyanates.
conditions to avoid polymerization: avoid mixing with incompatible
materials (water, strong bases, alcohols, metal compounds or
surface active agents).
Waste disposal methods: spilled material & water rinses area classified
as chemical waste & must be disposed of in accordance with current
local, state and federal regulations.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: diphenyl methane diisocyanate (mdi) (sara iii)
cas: 26447-40-5
fraction by wt: >70%
other rec limits: none specified
osha pel: 0.02 mg/m3
acgih tlv: 0.02 mg/m3
ingred name: mdi homopolymer
fraction by wt:
other rec limits: none specified
Health hazards acute and chronic: acute; inhalation: vapor can be
irritation. Eye: contains materials that are severely irritating,
permanent injury. Skin: irritation upon direct contact. Ingestion:
harmful if swallowed.
effects of overexposure: n,n'bis(2-hydroxypropyl) aniline may cause
severe eye irritation, with possible permanent injury; however,
this product as a whole has not been tested for eye irritation
potential.
First aid: inhalation: remove to frseh air. Give artificial respiration
if not breathing. Give oxygen if breathing difficult. Get immediate
medical attention. Eye: immediate flush with water at least 15
minutes. get immediate medical aid. Skin: remove contaminated
clothing. Wash affected areas with water. Ingestn: dilute with
water. Get immediate medical attention. Get medical attention if
symptoms persist.
Vapor pres:
vapor density: > air
spec gravity: 0.91 (water=1)
solubility in water: slightly soluble
appearance and odor: amber liquid; strong amine odor
percent volatiles by volume:
Stability indicator/materials to avoid: yes
strong oxidizers, acids, peroxides, aldehydes, anhydrides, isocyanates.
stability condition to avoid: store in open containers, exposure to heat
and/or open flame, uncontrolled mixing with incompatible
substances.
hazardous decomposition products: carbon monoxide, carbon dioxide,
oxides of nitrogen, ammonia, traces of amines, anilines, aryl
compounds.
conditions to avoid polymerization: storage in open containers, exposure
to heat &/or open flame, uncontrolled mixing with imcompatible
substances.
Waste disposal methods: spilled material & water rinses are classified
as chemical waste, and must be disposed of in accordance with
current local, state and federal regulations.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: organic polyol
other rec limits: none specified
ingred name: modifiers
other rec limits: none specified
ingred name: total of organic polyols & modifiers
rtecs #: 9999999zz
fraction by wt: >88%
other rec limits: none specified
ingred name: n,n'-bis(2-hydroxypropyl)-aniline
fraction by wt:
other rec limits: none specified
ingred name: xylene (sara iii)
cas: 1330-20-7
rtecs #: ze2100000
fraction by wt:
other rec limits: none specified
osha pel: 100 ppm
acgih tlv: 100 ppm
epa rpt qty: 1000 lbs
dot rpt qty: 1000 lbs