NationalStockNumber.INFO
Worldwide distributor of NSN parts and consumables located in the USA.
Worldwide distributor of NSN parts and consumables located in the USA.
A dough-like pigmented composition formulated for filling dents, creases, and imperfections in metal surfaces, in order to form a continuous smooth surface with adjacent areas. Excludes filler, wood and surfacer, liquid.
Send us a request for quote using the form below. Our team will contact you with an up to date pricing and availability quote ASAP.
Dental cements and other dental fillings; bone reconstruction cements
Pharmaceutical goods, n.E.S.
Pharmaceutical preparations
Y - Indicates information is in the hazardous materials information resource system (hmirs).
PMICA - Item does not contain precious metal.
CRITL- The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
150110 - Putty
620 - Paint, in individual containers less than 10 cubic ft
9 - Other or no special handling required (sh)
A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
B - Construction materials: includes paint and related materials, prefabricated building, wood products, metal and composition mater
T - 55.0
Z - No special type of cargo code applicable
Questions & Answers: |
|
| What are the historical prices recorded for this stock number? | |
| No pre-dated pricing for this NSN could be found. | |
| Does NSN 8030-01-057-4220 have a shelf life? | |
| No. There is no shelf life applicable for this NSN. | |
| What NATO entities are users of this NSN? | |
| No recorded entities for this stock number. | |
| What is the NIIN of NSN 8030-01-057-4220? | |
| 010574220 or 01-057-4220 | |
| Does NSN 8030-01-057-4220 require demilitarization? | |
| Yes - ITAR Controlled | |
| What is the most recent solicitation for NSN 8030-01-057-4220? | |
| No solicitations for this NSN. | |
| When was this national stock number assigned to the federal catalog? | |
| Mar 13, 1978 | |
Effects of overexposure: vapor may irritate eyes, nose & throat.
headache & nausea may occur.
First aid: wash w/ soap & water. Remove to fresh air.
Hcc: n1
vapor density: >1.0
spec gravity: 1.4
evaporation rate & reference:
solubility in water: negligible
appearance and odor: grey mortar, styrene odor
percent volatiles by volume: 23
Stability indicator/materials to avoid: yes
organic peroxides & strong acids.
stability condition to avoid: organic peroxides & strong acids.
hazardous decomposition products: none accd to mfr.
conditions to avoid polymerization: organic peroxides & strong acids
Waste disposal methods: dispose iaew fed, state & local codes.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: polyester resin
fraction by wt: 29%
ingred name: styrene, monomer (sara iii)
cas: 100-42-5
rtecs #: wl3675000
fraction by wt: 15%
osha pel: 100 ppm
acgih tlv: s,50ppm/100stel;9293
epa rpt qty: 1000 lbs
dot rpt qty: 1000 lbs
ingred name: pigment
fraction by wt: 1%
ingred name: inert fillers
fraction by wt: 55%
Routes of entry: inhalation: yes skin: yes ingestion: no
reports of carcinogenicity: ntp: unknown iarc: yes
health hazards acute and chronic: irritating to skin, eye and all parts
of respiratory tract. May cause depression of nervous system and
somewhat anesthetic.
explanation of carcinogenicity: the international agency for research on
cancer has classified styrene as a possible human carcinogen (class
2b).
First aid: eye contact: flush promptly w/copious amounts of water for 15
minutes, seek medical aid immediately. Skin contact: wash
thoroughly with soap and water. Remove contaminated cloth and seek
medical aid. inhalation: remove victim to a well ventilated area.
use oxygen or artificial respiration as required. Seek medical aid
immediately. Ingestion: do not induce vomiting. Seek medical aid
immediately.
Hcc: f3
boiling pt: b.P. Text: 295f,146c
vapor pres: 4.5 @ 20 f
vapor density: > air
spec gravity: 1.8 gm/cc
evaporation rate & reference: slower than butyl acetate
appearance and odor: pigmented paste, typical styrene odor.
Stability indicator/materials to avoid: yes
strong acids, peroxide and other oxidizing agents.
stability condition to avoid: avoid storage in open container, prolonged
storage above 100 f and exposure to excessive heat or open flame.
Waste disposal methods: dispose of in accordance with local, state and
federal laws and regulations.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: styrene, monomer (sara iii)
cas: 100-42-5
rtecs #: wl3675000
fraction by wt: 14%
other rec limits: none specified
osha pel: 100 ppm
acgih tlv: s,50ppm/100stel;9293
epa rpt qty: 1000 lbs
dot rpt qty: 1000 lbs
ingred name: talc (containing no asbestos)
cas: 14807-96-6
rtecs #: ww2710000
fraction by wt: 60%
other rec limits: none specified
osha pel: 2 mg/m3 rdust
acgih tlv: 2 mg/m3 rdust; 9192
ingred name: unsaturated polyester resin
fraction by wt: 26%
other rec limits: none specified