NationalStockNumber.INFO
Worldwide distributor of NSN parts and consumables located in the USA.
Worldwide distributor of NSN parts and consumables located in the USA.
A composition which may consist of finely ground silex or quartz, or finely divided wood, vegteable fiber, cellulosic derivative or resin binding material and volatile solvents. It is used to fill cracks, pores, cavities or seams in wood products prior to applying paint, varnish or the like. It may be stained to various colors. See sealer, surface.
Send us a request for quote using the form below. Our team will contact you with an up to date pricing and availability quote ASAP.
Painters' fillings
Glaziers' putty; grafting putty; resin cement, caulking compounds and other mastics; painters' fillings; nonrefractory surfacing preparations
Shingles, molding, wallboard
Y - Indicates information is in the hazardous materials information resource system (hmirs).
PMICA - Item does not contain precious metal.
CRITL- The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Questions & Answers: |
|
| What are the historical prices recorded for this stock number? | |
| No pre-dated pricing for this NSN could be found. | |
| Does NSN 8030-01-097-0803 have a shelf life? | |
| No. There is no shelf life applicable for this NSN. | |
| What NATO entities are users of this NSN? | |
| No recorded entities for this stock number. | |
| What is the NIIN of NSN 8030-01-097-0803? | |
| 010970803 or 01-097-0803 | |
| Does NSN 8030-01-097-0803 require demilitarization? | |
| Yes - ITAR Controlled | |
| What is the most recent solicitation for NSN 8030-01-097-0803? | |
| No solicitations for this NSN. | |
| When was this national stock number assigned to the federal catalog? | |
| Jul 05, 1980 | |
Effects of overexposure: styrene @ 400 ppm or in strong conc is irrit to
all parts resp tract & eyes. (see supp data)
First aid: remove victim from exp to well vent area,give o*2/artificial
respiration if nec. If ingest,dont induce vomit,call phys. Eye
cont,flush w/h*2o at least 15 min,consult eye phys. Wash from skin
w/plenty soap & h*2o.
Hcc: f3
boiling pt: b.P. Text: 295f styren
spec gravity: 0.96
evaporation rate & reference: 1.0 (bu ac)
solubility in water: insoluble
appearance and odor: paste form w/odor of styrene
percent volatiles by volume: 17
Stability indicator/materials to avoid: yes
stability condition to avoid: open flame,heat,high temps &
contamination.
conditions to avoid polymerization: open flame,heat,oxidizing agents
Waste disposal methods: use either approved sanitary landfill or
incineration. Dont incinerate closed containers. Waste disposal
must be iaw federal, state & local regulations.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: benzoyl peroxide (50%)
rtecs #: dm8577000
fraction by wt: 1.2%
acgih tlv: 5 mg/cum
ingred name: unsaturated polyester
fraction by wt: 41%
ingred name: dimethylaniline (n,n-dimethyl-aniline) (sara iii)
cas: 121-69-7
rtecs #: bx4725000
fraction by wt: 0.29%
osha pel: s, 5 ppm/10 stel
acgih tlv: s,5 ppm/10 stel;9192
epa rpt qty: 1 lb
dot rpt qty: 1 lb
ingred name: hydroquinone (sara iii)
cas: 123-31-9
rtecs #: mx3500000
fraction by wt: 0.01%
osha pel: 2 mg/m3
acgih tlv: 2 mg/m3; 9192
epa rpt qty: 1 lb
dot rpt qty: 1 lb
ingred name: styrene, monomer (sara iii)
cas: 100-42-5
rtecs #: wl3675000
fraction by wt: 17%
osha pel: 100 ppm
acgih tlv: s,50ppm/100stel;9293
epa rpt qty: 1000 lbs
dot rpt qty: 1000 lbs
Ld50 lc50 mixture: none specified by manufacturer.
routes of entry: inhalation: yes skin: yes ingestion: no
reports of carcinogenicity: ntp: no iarc: yes osha: no
health hazards acute and chronic: skin: prolonged/frequent contact may
cause defatting & dryness of skin w/resultant irritation & possible
dermatitis. Styrene may be absorbed thru the skin in toxic amounts.
eyes: may cause irritation. liquid splashes may result in more
serious injuries. May cause lachrymation (tears). Inhal: vapors
(efts of overexp)
explanation of carcinogenicity: styrene: iarc monographs, supplement,
vol 7, pg 345, 1987: group 2b. Animal: nervous system.
effects of overexposure: hlth haz: may cause mucous membrane irritation
& upper respiratory tract discomfort. High concentrations may
result in headache, nausea, insensibility & other cns effects.
repeated exposure to high co ncentrations may cause liver & kidney
damage. Ingest: may cause gastrointestinal disturbances, pain &
discomfort.
medical cond aggravated by exposure: none specified by manufacturer.
First aid: skin: wash with soap and water. Eyes: flush with copious
amounts of water for at least 15 minutes. Seek immediate medical
aid. Inhalation: remove victim from exposure. If victim is
unconscious, admini ster artificial respiration and/or oxygen as
needed. Seek medical aid. Ingest: do not induce vomiting
(aspiration hazard). Seek immediate medical aid.
Vapor density:
spec gravity: 1.02 (h*2o=1)
solubility in water: insoluble
appearance and odor: smooth paste; styrene odor.
Stability indicator/materials to avoid: yes
strong acids and oxidizing agents.
stability condition to avoid: heat and direct sunlight.
hazardous decomposition products: carbon monoxide, carbon dioxide, low
molecular hydrocarbons and organic acids.
conditions to avoid polymerization: sunlight, open flames and
contamination.
Waste disposal methods: incinerate in an approved incinerator or dispose
of in a chemical dump in accordance with local, state and federal
regulations.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: polyester resin
fraction by wt: 35-40%
osha pel: n/k
acgih tlv: n/k
ingred name: styrene; (styrene monomer) (sara 313) lel: 1.1%. Uel:
6.1%.
cas: 100-42-5
rtecs #: wl3675000
fraction by wt: 10-15%
osha pel: 100 ppm
acgih tlv: 50 ppm; 100 stel, s
epa rpt qty: 1000 lbs
dot rpt qty: 1000 lbs
ingred name: titanium oxide; (titanium dioxide)
cas: 13463-67-7
rtecs #: xr2275000
fraction by wt:
osha pel: 15 mg/m3 tdust
acgih tlv: 10 mg/m3 tdust
ingred name: iron hydroxide oxide; (iron oxide)
cas: 20344-49-4
fraction by wt:
osha pel: 10 mg/m3 (mfr)
acgih tlv: 5 mg/m3 (mfr)
ingred name: iron oxide (mfr cas # 1039-37-1)
cas: 1309-37-1
rtecs #: no7400000
fraction by wt:
osha pel: 10 mg/m3 (fe)
acgih tlv: 5mg/m3 fume (fe)