NationalStockNumber.INFO
Worldwide distributor of NSN parts and consumables located in the USA.
Worldwide distributor of NSN parts and consumables located in the USA.
A chemical composition formulated for coating or for filling voids, cracks, joints or seams of objects and/or materials to exclude foreign matter and/or prevent the transmission of fluids therethrough. It is not designed to act as a primer coating or to be sanded or ground after application. It cannot be wiped off. For items which are specifically compounded to provide electrical insulating characteristics, use insulating compound, electrical. Excludes caulking compound; gasket cement; corrosion preventive compound; cement, iron and steel; plumbing fixture setting compound; preservative coating, rubber and textile treating compounds.
| Solicitation | Return by Date | Buyer Code | Quantity |
|---|---|---|---|
| SPE8ES18T7491 | 2018-07-03 | PEPCE | 20 KT |
| SPE8ES18T7106 | 2018-06-25 | PEPCE | 76 KT |
| SPE8ES18T5438 | 2018-05-01 | PEPCE | 60 KT |
| SPE8ES18T4138 | 2018-03-19 | PEPCE | 20 KT |
| SPE8ES18T2870 | 2018-02-06 | PEPCE | 155 KT |
| SPE8ES18T2712 | 2018-02-05 | PEPCE | 26 KT |
| SPE8ES17T6660 | 2017-09-12 | PEPCE | 35 KT |
| SPE8ES17T6004 | 2017-08-16 | PEPCE | 28 KT |
| SPE8ES17T3438 | 2017-04-24 | PEPCE | 25 KT |
| SPE8ES17T2601 | 2017-03-07 | PEPCE | 24 KT |
The last inventory check on this NSN was done on 05/17/2024. Due to rapid changes in inventory this may not be the current stock qty.
Send us a request for quote using the form below. Our team will contact you with an up to date pricing and availability quote ASAP.
Caulking compounds
Glaziers' putty; grafting putty; resin cement, caulking compounds and other mastics; painters' fillings; nonrefractory surfacing preparations
Shingles, molding, wallboard
Y - Indicates information is in the hazardous materials information resource system (hmirs).
PMICA - Item does not contain precious metal.
CRITL- The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
149610 - Caulking/glaziers compounds noi
620 - Paint, in individual containers less than 10 cubic ft
9 - Other or no special handling required (sh)
A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
B - Construction materials: includes paint and related materials, prefabricated building, wood products, metal and composition mater
R - Flammable liquids, un class 3 (flammable liquids label)
T - 55.0
Questions & Answers: |
|
| What are the historical prices recorded for this stock number? | |
| Historical data shows pricing from $459.84 to $766.40.. | |
| Does NSN 8030-01-119-7885 have a shelf life? | |
| No. There is no shelf life applicable for this NSN. | |
| What NATO entities are users of this NSN? | |
| Department Of The Air Force, Department Of The Navy, General Services Administration, Brazil, Spain, Singapore, Canada, Republic Of Korea, Netherlands, Portugal, and Greece | |
| What is the NIIN of NSN 8030-01-119-7885? | |
| 011197885 or 01-119-7885 | |
| Does NSN 8030-01-119-7885 require demilitarization? | |
| Yes - ITAR Controlled | |
| What is the most recent solicitation for NSN 8030-01-119-7885? | |
| Solicitation SPE8ES18T7491 for qty 20 on 06/28/2018 | |
| When was this national stock number assigned to the federal catalog? | |
| Oct 06, 1981 | |
Routes of entry: inhalation: yes skin: yes ingestion: yes
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: product is irritating. It may also
sensitize skin allergies in some people and/or contribute to kidney
or liver damage.
explanation of carcinogenicity: mfr lists formaldehyde in ingredient 1.
mfr states concentration is below 0.1% & no free formaldehyde was
found in tests
effects of overexposure: eye: irritation. Skin: irritation and possible
allergic dermatitis. Inhaled: respiratory irritation. Ingested: g/i
irritation,nausea,vomiting,abdominal pain. May cause kidney,liver
damage.
medical cond aggravated by exposure: none reported.Hmis: expect skin
allergies,kidney or liver disorders to be aggravated.
First aid: eye: flush with water 15 min. Skin: wash with soap & water.
inhaled: remove from exposure. If symptoms persist or product is
ingested,get medical attention.
Hcc: n1
spec gravity: 1.38
solubility in water: negligible
percent volatiles by volume: 3.156
Stability indicator/materials to avoid: yes
strong oxidizers
stability condition to avoid: none reported
hazardous decomposition products: normal products of combustion,sulfur
oxides,hydrogen sulfide
Waste disposal methods: dispose i/a/w federal,state,local regulations.
mfr states product is not a hazardous waste by epa definition.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: phenol polymer with formaldehyde
cas: 9003-35-4
ingred name: 4,4'-isopropylidenediphenol epichlorohydrin polymer
cas: 25068-38-6
rtecs #: sl6475000
Ld50 lc50 mixture: oral ld50 (rat) is unknown.
routes of entry: inhalation: yes skin: yes ingestion: no
reports of carcinogenicity: ntp: no iarc: yes osha: no
health hazards acute and chronic: eyes: irritation. May cause eye
damage. Skin: irritation. Prolonged exposure may cause allergic
skin rash. Toxic by skin absorption. Prolonged exposure to
hexavalent chromium compounds may cause skin ulcers. Inhalation:
irritation of mucous membranes. Ingestion: irritation of stomach
and intestines.
explanation of carcinogenicity: iarc concluded that chromium compounds,
hexavalent is carcinogenic to humans.
effects of overexposure: skin: painless penetrating ulcers of the skin.
inhalation: broncho asthma, nausea, weakness, possible liver
damage, perforation of the cartilaginous nasal septum. Ingestion:
nausea, vomiting, and diar rhea. Possible liver and kidney damage.
medical cond aggravated by exposure: people with chronic diseases of the
skin, liver and kidney may be at increased risk when exposed to
this material.
First aid: eyes: flush with luke warm water for 15 minutes. Consult a
physician. Skin: wash with soap and water. If symptoms persist,
consult a physician. Inhalation: remove to fresh air. If symptoms
are present consult a physician. Ingestion: consult a physician.
Hcc: n1
spec gravity: 1.41
solubility in water: complete
appearance and odor: inorganic dichromate solution
Stability indicator/materials to avoid: yes
easily oxidizable materials
stability condition to avoid: none stated by the manufacturer.
hazardous decomposition products: oxides of carbon and nitrogen;
chromium compounds
Waste disposal methods: epa waste no. D-007. Dispose of spillage in
compliance with federal and state regulations.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: dimethyl acetamide
cas: 127-19-5
rtecs #: ab7700000
fraction by wt: 10%
other rec limits: none recommended
osha pel: s, 10 ppm
acgih tlv: s, 10 ppm; 9293
ingred name: calcium dichromate
cas: 14307-33-6
rtecs #: hx7630000
fraction by wt: 25%
other rec limits: none recommended
Ld50 lc50 mixture: oral ld50 (rat) is unknown.
routes of entry: inhalation: yes skin: yes ingestion: no
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: eyes: irritation. Skin: local
irritation. Inhalation: irritation to nose and throat. Ingestion:
may cause nausea.
explanation of carcinogenicity: none of the compounds in this product is
listed by iarc, ntp, or osha as a carcinogen.
effects of overexposure: skin: may cause allergic skin rash in
sensitized individuals. Inhalation: prolonged exposure above pel
may cause headache, fatigue, confusion, dizziness, drowsiness,
numbness. Prolonged exposure can c ause liver and kidney damage.
ingestion: may cause vomiting, liver and kidney damage.
medical cond aggravated by exposure: chronic diseases of the skin, liver
and kidney may be at increased risk when exposed to this material.
First aid: inhalation: move person to fresh air. If symptoms are
present, consult a physician. Eyes: flush immediately with luke
warm water for at least 15 minutes. If symptoms persist, consult
physician. Skin: wash with soap and water. If symptoms persist,
consult a physician. Ingestion: consult a physician.
Hcc: v4
vapor density: 3.2
spec gravity: 1.38
evaporation rate & reference: 2.2 (toluene)
solubility in water: negligible
appearance and odor: polysulfide rubber compound
Stability indicator/materials to avoid: yes
strong oxidizing agents
stability condition to avoid: high heat, open flames and other sources
of ignition
hazardous decomposition products: oxides of carbon, sulfur dioxide,
traces of hydrogen sulfide.
Waste disposal methods: not a hazadrous waste according to epa
regulations. Consult state regulations prior to disposal of
spillage.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: phenol formaldehyde resin
cas: 9003-35-4
fraction by wt:
other rec limits: none recommended
ingred name: epoxy resin
cas: 25068-38-6
rtecs #: kc2100000
fraction by wt:
other rec limits: none recommended
ingred name: toluene (sara iii)
cas: 108-88-3
rtecs #: xs5250000
fraction by wt:
other rec limits: none recommended
osha pel: 200 ppm/150 stel
acgih tlv: 50 ppm; 9293
epa rpt qty: 1000 lbs
dot rpt qty: 1000 lbs
Reports of carcinogenicity: ntp: yes iarc: yes osha: no
health hazards acute and chronic: acute: exposure to hexavalent chromium
mists/fumes can cause skin & nasal mucous membrane ulcers. Exposure
to dimethyl acetamide may cause eye irritation, is harmful if
absorbed through the skin & inh alation may cause liver or kidney
damage. Chronic: prolonged or repeated exposure may cause cancer.
explanation of carcinogenicity: hexavalent chromium compounds are listed
as known carcinogens by ntp and iarc.
effects of overexposure: eyes-burning, tearing, reddening, possible
transient corneal injury. Skin-reddening, discomfort.
medical cond aggravated by exposure: none specified by manufacturer.
First aid: eyes-flush with lukewarm water for 15 minutes. If symptoms
persist, see a physician. Skin-wash with soap & water. If symptoms
persist, consult a physician. Inhalation-remove to fresh air.
obtain medic al attention. Ingestion-consult a physician.
Hcc: v4
boiling pt: b.P. Text: >212f,>100c
vapor density: >1
spec gravity: 1.411
evaporation rate & reference: unavailable
appearance and odor: black paste.
percent volatiles by volume: 73
Stability indicator/materials to avoid: yes
easily oxidizable materials.
stability condition to avoid: not known.
hazardous decomposition products: oxides of carbon and nitrogen,
chromium compounds.
conditions to avoid polymerization: will not occur.
Waste disposal methods: unused/uncontaminated product is an epa/rcra
waste number d007 hazardous waste. Dispose of in accordance with
local, state and federal regulations.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: calcium dichromate
cas: 14307-33-6
rtecs #: hx7630000
fraction by wt: 25%
other rec limits: none recommended
osha pel: 0.5 mg cr/m3
acgih tlv: 0.05 mg cr/m3
ingred name: dimethyl acetamide
cas: 127-19-5
rtecs #: ab7700000
fraction by wt: 10%
other rec limits: none recommended
osha pel: s, 10 ppm
acgih tlv: s, 10 ppm; 9495
ingred name: silica, amorphous (fumed)
cas: 112945-52-5
rtecs #: vv7310000
fraction by wt:
other rec limits: none recommended
osha pel: 6 mg/m3
acgih tlv: 10 mg/m3
ingred name: water
cas: 7732-18-5
rtecs #: zc0110000
other rec limits: none recommended
ingred name: aluminum silicate
cas: 1335-30-4
other rec limits: none recommended
ingred name: magnesium aluminum silicate
cas: 8031-18-3
other rec limits: none recommended
Ld50 lc50 mixture: pel: not established for product
routes of entry: inhalation: yes skin: yes ingestion: yes
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: dimethylacetamide: eyes-possible
transient corneal injury. Skin-harmful if absorbed through skin;
rapidly absorbed through skin. Inhalation-may cause liver or kidney
damage. Dimethyl formamide: eyes-p ossible transient corneal
injury. Skin-slightly toxic to animals by absorption.
inhalation-liver damage may occur.
explanation of carcinogenicity: none specified by manufacturer.
effects of overexposure: dimethylacetamide: eyes-may cause burning,
tearing, reddening. Dimethyl formamide: eyes-may cause burning,
tearing, reddening. Inhalation-vomiting, difficulty in swallowing,
diarrhea, lack of appetite , headache, fainting, dizziness, dark
urine, mental disturbances.
medical cond aggravated by exposure: none specified by manufacturer.
First aid: eyes-flush with luke warm water for 15 min. Consult a
physician. Skin-wash with soap and water. If symptoms persists,
consult a physician. Inhalation-remove to fresh air. If symptoms
are present consu lt a physician. Ingestion-consult a physician.
Hcc: n1
boiling pt: b.P. Text: 212-331f
vapor density: >air
spec gravity: 1.411
evaporation rate & reference: slower than n-butyl aceta
appearance and odor: black paste.
percent volatiles by volume: 72.7
Stability indicator/materials to avoid: yes
easily oxidizable materials.
stability condition to avoid: not known.
hazardous decomposition products: oxides of carbon and nitrogen,
chromium compounds.
Waste disposal methods: epa no. D-007 hazardous waste. Dispose of in
compliance with federal and state regulations.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: dimethyl acetamide
cas: 127-19-5
fraction by wt: 25%
other rec limits: none recommended
osha pel: 10 ppm
acgih tlv: 10 ppm
ingred name: calcium dichromate
cas: 14307-33-6
rtecs #: hx7630000
fraction by wt: 15%
other rec limits: none recommended
osha pel: 0.5 mg cr/m3
acgih tlv: 0.05 mg cr/m3
ingred name: talc (containing no asbestos),
cas: 14807-96-6
fraction by wt: 10%
other rec limits: none recommended
ingred name: dimethylformamide
cas: 68-12-2
rtecs #: lq2100000
fraction by wt: 5%
other rec limits: none recommended
osha pel: 10 ppm
acgih tlv: 10 ppm
epa rpt qty: 1 lb
dot rpt qty: 1 lb
ingred name: magnesium dichromate
cas: 13423-61-5
fraction by wt: 5%
other rec limits: none recommended
osha pel: 0.5 mg/m3
acgih tlv: 0.05 mg/m3 twa
ingred name: silicon dioxide (amorphous)
cas: 67762-90-7
other rec limits: none recommended
osha pel: 6 mg/m3
acgih tlv: 10 mg/m3
ingred name: water
cas: 7732-18-5
rtecs #: zc0110000
other rec limits: none recommended
ingred name: aluminum silicate
cas: 1335-30-4
other rec limits: none recommended
ingred name: magnesium aluminum silicate
cas: 8031-18-3
other rec limits: none recommended
Ld50 lc50 mixture: pel: not established for product
routes of entry: inhalation: yes skin: yes ingestion: yes
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: bisphenol a: eyes-may cause mechanical
irritation. Skin-may cause skin sensitzation. Inhalation-may cause
irritation to respiratory tract. Ingestion-low order of acute oral
toxicity.
explanation of carcinogenicity: none specified by manufacturer.
effects of overexposure: phenolic resin: eyes-may cause irritation,
redness and tearing. Skin-allergic skin rash in sensitive
individuals. Ingestion-may cause gastrointestinal irritation.
medical cond aggravated by exposure: none specified by manufacturer.
First aid: eyes-flush with luke warm water for 15 min. If symptoms
persists, consult physician. Skin-wash with soap and water. If
symptoms persists, consult a physician. Inhalation-remove to fresh
air. If sympto ms are present consult a physician.
ingestion-consult a physician.
Hcc: n1
vapor density: >air
spec gravity: 1.345
evaporation rate & reference: unavailable
appearance and odor: black paste.
percent volatiles by volume: 1.5
Stability indicator/materials to avoid: yes
strong oxidizing agents.
stability condition to avoid: not known.
hazardous decomposition products: oxides of carbon, sulfur dioxide,
traces of hydrogen sulfide.
Waste disposal methods: not a hazardous waste according to epa
regulations. Dispose of in compliance with federal and state
regulations.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: epoxy resin
cas: 25936-38-6
fraction by wt:
other rec limits: none recommended
ingred name: phenolic resin
cas: 28470-78-2
fraction by wt:
other rec limits: none recommended
ingred name: hydrogenated terphenyl
cas: 61788-32-7
fraction by wt:
other rec limits: none recommended
ingred name: carbon black
cas: 1333-86-4
rtecs #: ff5800000
fraction by wt: 10%
other rec limits: none recommended
ingred name: calcium carbonate
cas: 13151-65-3
fraction by wt: 5%
other rec limits: none recommended
ingred name: thiol terminated polymer, polydithioeter
cas: 68611-50-7
other rec limits: none recommended
ingred name: silicon dioxide (amorphous)
cas: 67762-90-7
other rec limits: none recommended
osha pel: 6 mg/m3
acgih tlv: 10 mg/m3