NationalStockNumber.INFO
Worldwide distributor of NSN parts and consumables located in the USA.
Worldwide distributor of NSN parts and consumables located in the USA.
A chemical composition formulated for coating or for filling voids, cracks, joints or seams of objects and/or materials to exclude foreign matter and/or prevent the transmission of fluids therethrough. It is not designed to act as a primer coating or to be sanded or ground after application. It cannot be wiped off. For items which are specifically compounded to provide electrical insulating characteristics, use insulating compound, electrical. Excludes caulking compound; gasket cement; corrosion preventive compound; cement, iron and steel; plumbing fixture setting compound; preservative coating, rubber and textile treating compounds.
| Solicitation | Return by Date | Buyer Code | Quantity |
|---|---|---|---|
| SPE8ES18T4298 | 2018-03-26 | PEPCE | 467 BX |
| SPE8ES18T3781 | 2018-03-12 | PEPCE | 453 BX |
| SPE8ES18T2738 | 2018-02-05 | PEPCE | 280 BX |
| SPE8ES18T2550 | 2018-01-24 | PEPCE | 1 BX |
| SPE8ES18T2504 | 2018-01-23 | PEPCE | 4 BX |
| SPE8ES18T2424 | 2018-01-22 | PEPCE | 4 BX |
| SPE8ES18T2354 | 2018-01-16 | PEPCE | 8 BX |
| SPE8ES18T2299 | 2018-01-16 | PEPCE | 5 BX |
| SPE8ES18Q0137 | 2017-12-06 | DSS01 | 1 BX |
| SPE8ES18T1154 | 2017-11-13 | PEPCE | 18 BX |
Send us a request for quote using the form below. Our team will contact you with an up to date pricing and availability quote ASAP.
Caulking compounds
Glaziers' putty; grafting putty; resin cement, caulking compounds and other mastics; painters' fillings; nonrefractory surfacing preparations
Shingles, molding, wallboard
Y - Indicates information is in the hazardous materials information resource system (hmirs).
PMICA - Item does not contain precious metal.
ADPE- Represents items with no adp components
CRITL- The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
149610 - Caulking/glaziers compounds noi
620 - Paint, in individual containers less than 10 cubic ft
9 - Other or no special handling required (sh)
A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
B - Construction materials: includes paint and related materials, prefabricated building, wood products, metal and composition mater
T - 55.0
Z - No special type of cargo code applicable
Questions & Answers: |
|
| What are the historical prices recorded for this stock number? | |
| Historical data shows pricing from $379.24 to $632.07.. | |
| Does NSN 8030-01-137-6964 have a shelf life? | |
| No. There is no shelf life applicable for this NSN. | |
| What NATO entities are users of this NSN? | |
| Department Of The Army, Department Of The Air Force, U.s. Marine Corps, Department Of The Navy, General Services Administration, Poland, Spain, Australia, Canada, New Zealand, Italy, Greece, and Turkey | |
| What is the NIIN of NSN 8030-01-137-6964? | |
| 011376964 or 01-137-6964 | |
| Does NSN 8030-01-137-6964 require demilitarization? | |
| Yes - ITAR Controlled | |
| What is the most recent solicitation for NSN 8030-01-137-6964? | |
| Solicitation SPE8ES18T4298 for qty 467 on 03/20/2018 | |
| When was this national stock number assigned to the federal catalog? | |
| Sep 01, 1982 | |
Reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: does not apply
effects of overexposure: prolonged exposure to skin may cause irritation
to a sensitive person
medical cond aggravated by exposure: skin irritation
First aid: eye irritation: wash with plenty of water for several min.
get medical attentionskin: wash thoroughly with soap and water.
inhalation: remove to fresh air. And ingestion: low toxcity. Get
medical atte ntion.
Hcc: v4
boiling pt: b.P. Text: > 300 f
melt/freeze pt: m.P/f.P text: dna
vapor pres: < 10 @ 80f
vapor density: negligible
spec gravity: 1.1 @ 80 f
evaporation rate & reference: polymerizes
solubility in water: low
appearance and odor: purple gel, odor-mild
Stability indicator/materials to avoid: yes
strong oxidizing agents and metalic salts
stability condition to avoid: none
hazardous decomposition products: none
conditions to avoid polymerization: excessive heat
Waste disposal methods: incinerate or bury in accordance with local and
federal regulations
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: polyglycol dimethacrylates
fraction by wt: 20-30%
osha pel: dna
acgih tlv: dna
ingred name: polyurethane methacrylate
fraction by wt: 45-55%
osha pel: dna
acgih tlv: dna
ingred name: acrylic acid (sara iii)
cas: 79-10-7
rtecs #: as4375000
fraction by wt: 4-6%
osha pel: s, 10 ppm
acgih tlv: s, 2 ppm; 9192
epa rpt qty: 5000 lbs
dot rpt qty: 5000 lbs
ingred name: silica, crystalline - fused
cas: 60676-86-0
rtecs #: vv7328000
fraction by wt: 6-8%
osha pel: see table z3
acgih tlv: 0.1 mg/m3 rdust;9293
ingred name: sulfumide
fraction by wt: < 1%
osha pel: dna
acgih tlv: dna
ingred name: 1-methyl-1-phenylethyl hydroperoxide (cumene hydroperoxide)
(sara iii)
cas: 80-15-9
rtecs #: mx2450000
fraction by wt: 3-4%
epa rpt qty: 10 lbs
dot rpt qty: 10 lbs
Reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: does not apply
effects of overexposure: prolonged exposure to skin may cause irritation
to a sensitive person
medical cond aggravated by exposure: skin irritation
First aid: eye irritation: wash with plenty of water for several min.
get medical attentionskin: wash thoroughly with soap and water.
inhalation: remove to fresh air. And ingestion: low toxcity. Get
medical atte ntion.
Hcc: n1
boiling pt: b.P. Text: >300f,>149c
melt/freeze pt: m.P/f.P text: dna
vapor pres: < 10 @ 80f
vapor density: negligible
spec gravity: 1.1 @ 80 f
evaporation rate & reference: polymerizes
solubility in water: low
appearance and odor: purple gel, odor-mild
Stability indicator/materials to avoid: yes
strong oxidizing agents and metalic salts
stability condition to avoid: none
hazardous decomposition products: none
conditions to avoid polymerization: excessive heat
Waste disposal methods: incinerate or bury in accordance with local and
federal regulations
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: polyglycol dimethacrylates
fraction by wt: 20-30%
osha pel: dna
acgih tlv: dna
ingred name: polyurethane methacrylate
fraction by wt: 45-55%
osha pel: dna
acgih tlv: dna
ingred name: acrylic acid (sara iii)
cas: 79-10-7
rtecs #: as4375000
fraction by wt: 4-6%
osha pel: s, 10 ppm
acgih tlv: s, 2 ppm; 9192
epa rpt qty: 5000 lbs
dot rpt qty: 5000 lbs
ingred name: silica, crystalline - fused
cas: 60676-86-0
rtecs #: vv7328000
fraction by wt: 6-8%
osha pel: see table z3
acgih tlv: 0.1 mg/m3 rdust;9293
ingred name: sulfumide
fraction by wt: < 1%
osha pel: dna
acgih tlv: dna
ingred name: 1-methyl-1-phenylethyl hydroperoxide (cumene hydroperoxide)
(sara iii)
cas: 80-15-9
rtecs #: mx2450000
fraction by wt: 3-4%
epa rpt qty: 10 lbs
dot rpt qty: 10 lbs
Routes of entry: inhalation: no skin: no ingestion: no
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: *in a single test, pure cumene
hydroperoxide caused tumors in one of thirty experimental animals
when injected under the skin.
explanation of carcinogenicity: as defined by ntp, iarc & osha there are
no carcinogens in this formulation.
effects of overexposure: prolonged exposure to skin may cause irritation
to a sensitive person.
medical cond aggravated by exposure: skin irritation
First aid: eye irritation: wash with plenty of water for several minutes.
get medical attention. Skin: wash thoroughly with soap & water.
inhalation: remove to fresh air. Ingestion: low toxicity. Get medical
attenti on.
Hcc: n1
boiling pt: b.P. Text: >300f,>149c
vapor pres:
vapor density: negligible
spec gravity: 1.1 @ 80f
evaporation rate & reference: polymerizes
solubility in water: low
appearance and odor: purple gel, odor mild
Stability indicator/materials to avoid: yes
strong oxidizing agents & metalic salts
stability condition to avoid: none
hazardous decomposition products: none
conditions to avoid polymerization: excessive heat
Waste disposal methods: incinerate or bury in accordance with local &
federal regulations.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: polyglycol dimethacrylates
fraction by wt: 20-30%
other rec limits: none specified
ingred name: polyurethane methacrylate
fraction by wt: 45-55%
other rec limits: none specified
ingred name: acrylic acid (sara iii)
cas: 79-10-7
rtecs #: as4375000
fraction by wt: 4-6%
other rec limits: none specified
osha pel: s, 10 ppm
acgih tlv: s, 2 ppm; 9192
epa rpt qty: 5000 lbs
dot rpt qty: 5000 lbs
ingred name: silica, crystalline - fused
cas: 60676-86-0
rtecs #: vv7328000
fraction by wt: 6-8%
other rec limits: none specified
osha pel: see table z3
acgih tlv: 0.1 mg/m3 rdust;9293
ingred name: sulfumide
fraction by wt:
other rec limits: none specified
ingred name: 1-methyl-1-phenylethyl hydroperoxide (cumene hydroperoxide)
(sara iii)
cas: 80-15-9
rtecs #: mx2450000
fraction by wt: 3-4%
other rec limits: none specified
epa rpt qty: 10 lbs
dot rpt qty: 10 lbs
Ld50 lc50 mixture: oral ld50: 5.1 ml/kg mouse; dermal *
routes of entry: inhalation: unknown skin: yes ingestion: yes
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: eye: irritating, tissue injury. Skin:
irritate, dermatitis. Sensitization, dermatitic rash. Inhalation:
low volatile, not resp hazard under normal conditions. Irrit/toxic
vapors may be released at ele vated temps. Ingestion: not
evaluated, assumed to cause nausea & vomiting. Target organs: skin
& eye.
First aid: eye: immed flush w/water 15 min, lift eyelid. Get prompt med
aid. Skin: flush w/soap & water till all chem removed. Rmv contam
cloth. Inhal: 1st aid not normally req'd. Remove to fresh air. If
breath difficult, give oxygen. If breath stopped, give artif resp.
get med aid. Ingest: dont induce vomit. If conscious, give
milk/water. Keep warm, quiet. Dont give anything by mouth to
unconscious person.
Hcc: n1
boiling pt: b.P. Text: polymerizes
vapor pres: 0.01 @ 77f
vapor density: 1.01
spec gravity: 1.070 (water=1)
viscosity: 200,000 cps
solubility in water: insoluble
appearance and odor: purple paste; mild, pleasant odor
percent volatiles by volume:
Stability indicator/materials to avoid: yes
metals & their salts, perma-lok anaerobic surface conditioners.
stability condition to avoid: sunlight, excessive heat, contamination by
metals/anaerobic surface conditioners in lrg qty, will cause
polymerization.
hazardous decomposition products: thermal decomposition could produce
carbon monoxide, carbon dioxide and unidentified organic compounds.
conditions to avoid polymerization: perma-lok prods anaerobic,
polymerize in absence of air. Sunlight,excessive heat,contam by
metals/anaerobic surface cond
Waste disposal methods: waste disposal should be in accordance with
existing federal, state & local regulations.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: hydroxyethyl methacrylate
cas: 868-77-9
rtecs #: oz4725000
fraction by wt: >1%
other rec limits: none specified
ingred name: urethane dimethacrylate
cas: 39318-69-9
fraction by wt: >1%
other rec limits: none specified
ingred name: voc: 0.09 lbs/gal (10 g/l)
rtecs #: 9999999vo
other rec limits: none specified
Ld50 lc50 mixture: oral ld50 >10000 mg/kg dermal >2000
routes of entry: inhalation: yes skin: yes ingestion: yes
reports of carcinogenicity: ntp: yes iarc: yes osha: no
health hazards acute and chronic: eye: irritation. Skin: irritation.
explanation of carcinogenicity: saccharin is listed by ntp & iarc.
First aid: ingest: dont induce vomit. Keep calm, get med aid. Inhal:
remove to fresh air, get med aid. Skin: wash w/soap & water. Eye:
wash w/water for >15 minutes, get med aid.
Boiling pt: b.P. Text: >300f,>149c
vapor pres:
vapor density: na
spec gravity: 1.13
ph: na
evaporation rate & reference: na
solubility in water: low.
appearance and odor: purple gel, w/irritating odor.
Stability indicator/materials to avoid: yes
none
hazardous decomposition products: irritating organic vapors.
Waste disposal methods: incinerate following epa & local regulations.
Ingred name: polyurethane methacrylate
other rec limits: none recommended
ingred name: polyglycol dimethacrylate
cas: 25852-47-5
fraction by wt: 10-20%
other rec limits: none recommended
ingred name: acrylic acid (sara 313) (cercla)
cas: 79-10-7
rtecs #: as4375000
fraction by wt: 3-5%
other rec limits: none recommended
epa rpt qty: 5000 lbs
dot rpt qty: 5000 lbs
ingred name: cumene hydroperoxide (sara 313) (cercla)
cas: 80-15-9
rtecs #: mx2450000
fraction by wt: 1-3%
other rec limits: none recommended
epa rpt qty: 10 lbs
dot rpt qty: 10 lbs
ingred name: silica, crystalline - fused
cas: 60676-86-0
rtecs #: vv7328000
fraction by wt: 3-5%
other rec limits: none recommended
ingred name: saccharin (sara 313) (cercla)
cas: 81-07-2
rtecs #: de4200000
fraction by wt: 1-3%
other rec limits: none recommended
epa rpt qty: 100 lbs
dot rpt qty: 100 lbs
ingred name: 1-acetyl-2-phenol hydrazine
cas: 114-83-0
fraction by wt: 0-1-1%
other rec limits: none recommended
ingred name: voc = 12.8
rtecs #: 9999999vo
other rec limits: none recommended
osha pel: not relevant
acgih tlv: not relevant