Worldwide distributor of NSN parts and consumables located in the USA.
A chemical composition formulated for coating or for filling voids, cracks, joints or seams of objects and/or materials to exclude foreign matter and/or prevent the transmission of fluids therethrough. It is not designed to act as a primer coating or to be sanded or ground after application. It cannot be wiped off. For items which are specifically compounded to provide electrical insulating characteristics, use insulating compound, electrical. Excludes caulking compound; gasket cement; corrosion preventive compound; cement, iron and steel; plumbing fixture setting compound; preservative coating, rubber and textile treating compounds.
Send us a request for quote using the form below. Our team will contact you with an up to date pricing and availability quote ASAP.
Caulking compounds
Glaziers' putty; grafting putty; resin cement, caulking compounds and other mastics; painters' fillings; nonrefractory surfacing preparations
Shingles, molding, wallboard
Y - Indicates information is in the hazardous materials information resource system (hmirs).
PMICA - Item does not contain precious metal.
CRITL- The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Questions & Answers: |
|
What are the historical prices recorded for this stock number? | |
No pre-dated pricing for this NSN could be found. | |
Does NSN 8030-01-146-0980 have a shelf life? | |
No. There is no shelf life applicable for this NSN. | |
What NATO entities are users of this NSN? | |
Netherlands | |
What is the NIIN of NSN 8030-01-146-0980? | |
011460980 or 01-146-0980 | |
Does NSN 8030-01-146-0980 require demilitarization? | |
Yes - ITAR Controlled | |
What is the most recent solicitation for NSN 8030-01-146-0980? | |
No solicitations for this NSN. | |
When was this national stock number assigned to the federal catalog? | |
Jan 24, 1983 |
Routes of entry: inhalation: yes skin: yes ingestion: yes
health hazards acute and chronic: vapors cause dizziness due to
insufficient oxygen and be may irritant to respiratory tract,
possible cardiac arrhythmias at high concentrations for
chlorofluoroalkane. Threshold limit value: (5600 mg/ m3) 1000 ppm
for chlorofluoroalkane.
First aid: seek medical assistance for treatment, observation and
support as needed. Ingestion: drink water to dilute. Inhalation:
move to fresh air and administer oxygen if necessary. Flush with
water for 15 mi nutes. Skin: wash with soap and water for 5
minutes.
Vapor density: > than 1
spec gravity: >1
evaporation rate & reference: > 1.0 (butyl acetate)
solubility in water: soluble
appearance and odor: clear liquid
percent volatiles by volume:
corrosion rate: *(by wt)
Stability indicator/materials to avoid: yes
avoid alkali & alkaline earth metals such as sodium with
chlorofluoroalkane.
stability condition to avoid: do not incinerate and avoid open flames.
do not store above 120f(49c).
hazardous decomposition products: toxic & corros fumes: halogens,
carbonyl halides can result from high temperatures decomposition of
chlorofluoroalkane.
Waste disposal methods: dispose of material according to federal, state
and local regulations.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: polyurethane polyols
fraction by wt: < 85%
other rec limits: none specified
ingred name: surfactants
fraction by wt: < 5%
other rec limits: none specified
ingred name: organic phosphorus/halogen compounds
fraction by wt: < 35%
other rec limits: none specified
ingred name: polyurethane catalysts
fraction by wt: < 10%
other rec limits: none specified
ingred name: emulsifiers
fraction by wt: < 10%
other rec limits: none specified
ingred name: chlorofluoroalkane
fraction by wt:
other rec limits: 8 hr twa (1000 ppm)
Routes of entry: inhalation: yes skin: yes ingestion: yes
health hazards acute and chronic: may irritate mucous membranes,
tightness of chest, respiratory tract, coughing, headache,
shortness of breath. May cause allergic sensitivity in some people
with asthma like symptoms, poss cardiac arr hythmias at high
concentrations of chlorofluoroalkane. Threshold lim: (mdi)0.02
ppm/0.2mg/m3. Chlorofluoroalkane 1000ppm.
First aid: seek medical assistance for treatment, observation and
support as needed. Ingestion: give water to drink to dilute.
inhalation: move to fresh air and administer oxygen if necessary.
flush with water f or 15 minutes. Skin: wash with soap andwater for
5 minutes.
Vapor density: > 1
spec gravity: >1
evaporation rate & reference: > 1.0 (butyl acetate)
solubility in water: insol/reacts w/water
appearance and odor: dark brown; mild odor.
percent volatiles by volume:
corrosion rate: *(by wt)
Stability indicator/materials to avoid: yes
avoid alcohols, water, strong bases, and metal compounds.
stability condition to avoid: avoid water contamination and open flames.
do not store above 120f(49c) or below 32f(0c).
hazardous decomposition products: 500f, co, benzene, toluene, oxides of
nitrogen, hcn, acetaldehyde, acetone.
conditions to avoid polymerization: water contamination. May form co2
pressure. Do not incinerate-avoid heating above 120f-may
polymerize.
Waste disposal methods: dispose of material according to federal, state
and local regulations. *container or polyethylene sheet and
further decontaminate liquid. Remove container to safe place with
loose cover.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: methylene bis (phenyldiisocyanate) mdi
fraction by wt: < 50%
other rec limits: 0.02 ppm tlv
ingred name: polymers of mdi
fraction by wt: < 50%
other rec limits: none specified
ingred name: chlorofluoroalkane
fraction by wt: < 10%
other rec limits: 8 hr twa (1000 ppm)
ingred name: surfactant
fraction by wt: < 5%
other rec limits: not specified
Ld50 lc50 mixture: ld50 rat 15 gm/kg
routes of entry: inhalation: yes skin: yes ingestion: yes
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: eye: irrit. Skin: irrit,
sensitization. Inhal: resp tract irrit, asthma, eczema, allergies,
coughing, wheezing, shortness of breath.
medical cond aggravated by exposure: pre-existing allergies
First aid: eye: flush w/water for 15 minutes, lifting lids. Skin: remove
contam clothes. Wash w/soap & water. Inhal: get fresh air. Ingest:
drink large amounts liquids. Dont induce vomit. Get med aid in all
case s.
Vapor pres: 2700 @ 70f
spec gravity: 1.3
appearance and odor: dark brown frothy liquid, mild odor.
Stability indicator/materials to avoid: yes
reacts w/water. Avoid alkalies, acids, alcohol, ammonia.
stability condition to avoid: reacts violently at high temperatures.
hazardous decomposition products: carbon monoxide, carbon dioxide,
nitrogen oxides, ammonia, trace amounts hydrogen cyanide are given
off.
Waste disposal methods: leave uncovered 24 hrs prior to disposal.
relieve all pressure. Empty cylinders relieved of pressure can be
disposed as non-hazardous waste. Dispose left-over chemical by
following instructions under spill/release.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: 4,4'- diphenylmethane diisocyanate (mdi) (sara 313)
cas: 101-68-8
rtecs #: nq9350000
fraction by wt: 40-70%
other rec limits: 0.2 mg/m3 ceiling
acgih tlv: 0.02 mg/m3
epa rpt qty: 1 lb
dot rpt qty: 1 lb
ingred name: polymeric mdi
cas: 9016-87-9
rtecs #: tr0350000
fraction by wt: 40-70%
other rec limits: none recommended
ingred name: chlorodifluoromethane (sara 313) (cercla)
cas: 75-45-6
rtecs #: pa6390000
fraction by wt: 7-13%
other rec limits: none recommended
acgih tlv: 3500 mg/m3
ozone depleting chemical: 2
Routes of entry: inhalation: yes skin: yes ingestion: yes
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: eye: irrit. Skin: irrit. Inhal: mucous
membrane irrit.
medical cond aggravated by exposure: pre-existing allergies
First aid: eye: flush w/water for 15 minutes, lifting lids. Skin: remove
contam clothes. Wash w/soap & water. Inhal: get fresh air. Ingest:
drink large amounts liquids. Dont induce vomit. Get med aid in all
case s.
Vapor pres: 2500 @ 70f
spec gravity: 1.2
appearance and odor: brown to light yellow frothy liquid, mild odor.
Stability indicator/materials to avoid: yes
nk
hazardous decomposition products: co, co2, nitrogen oxides, ammonia,
trace amounts hydrogen cyanide.
Waste disposal methods: leave uncovered 24 hrs prior to disposal.
relieve all pressure. Empty cylinders relieved of pressure can be
disposed as non-hazardous waste. Dispose left-over chemical by
following instructions under spill/release.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: polyol blend
fraction by wt: 40-70%
other rec limits: none recommended
ingred name: flame retardant
fraction by wt: 15-40%
other rec limits: none recommended
ingred name: catalyst
fraction by wt: 1-5%
other rec limits: none recommended
ingred name: silicone surfactant
fraction by wt: 1.0-5.0%
other rec limits: none recommended
ingred name: chlorodifluoromethane (sara 313) (cercla)
cas: 75-45-6
rtecs #: pa6390000
fraction by wt: 10-30%
other rec limits: none recommended
acgih tlv: 3500 mg/m3
ozone depleting chemical: 2