Worldwide distributor of NSN parts and consumables located in the USA.
A chemical composition formulated for coating or for filling voids, cracks, joints or seams of objects and/or materials to exclude foreign matter and/or prevent the transmission of fluids therethrough. It is not designed to act as a primer coating or to be sanded or ground after application. It cannot be wiped off. For items which are specifically compounded to provide electrical insulating characteristics, use insulating compound, electrical. Excludes caulking compound; gasket cement; corrosion preventive compound; cement, iron and steel; plumbing fixture setting compound; preservative coating, rubber and textile treating compounds.
Send us a request for quote using the form below. Our team will contact you with an up to date pricing and availability quote ASAP.
Caulking compounds
Glaziers' putty; grafting putty; resin cement, caulking compounds and other mastics; painters' fillings; nonrefractory surfacing preparations
Shingles, molding, wallboard
Y - Indicates information is in the hazardous materials information resource system (hmirs).
PMICA - Item does not contain precious metal.
CRITL- The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Questions & Answers: |
|
What are the historical prices recorded for this stock number? | |
No pre-dated pricing for this NSN could be found. | |
Does NSN 8030-01-163-3484 have a shelf life? | |
No. There is no shelf life applicable for this NSN. | |
What NATO entities are users of this NSN? | |
National Aeronautics and Space Administration | |
What is the NIIN of NSN 8030-01-163-3484? | |
011633484 or 01-163-3484 | |
Does NSN 8030-01-163-3484 require demilitarization? | |
Yes - ITAR Controlled | |
What is the most recent solicitation for NSN 8030-01-163-3484? | |
No solicitations for this NSN. | |
When was this national stock number assigned to the federal catalog? | |
Oct 01, 1983 |
Ld50 lc50 mixture: none specified by manufacturer.
routes of entry: inhalation: yes skin: yes ingestion: no
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: eye: mild irrit. Skin: mild
irrit.Prol/rep expo may cause allergic skin reaction.Inhal: health
effects from inhal are not expected unless product is heated.Vapors
of heated amtl may cause respiratory sys tem irrit.Ingest: not
likely route of expo to this product.
effects of overexposure: eye: redness,swelling,pain,tearing.
skin: redness,swelling,itching. Allergic skin
reaction-redness,swelling,blistering,itching.Irrit resp tract.
medical cond aggravated by exposure: none specified by manufacturer.
First aid: eye: immed flush w/lg amts of water.Get immed med
attn.Skin: flush w/lg amts of water.Irrit persist get med attn.Imemd
wash w/soap/lg amts of water.Remove contamin cloth.Sign/sympt occur
call physician. Inhal: remove to fresh air.Not breath give art
resp.Diffi breath get immed med attn.Ingest: do not induce
vomit.Drink 2 glasses of water.Call physician.
Hcc: n1
boiling pt: b.P. Text: n/determine
melt/freeze pt: m.P/f.P text: n/determine
decomp temp: decomp text: np
vapor pres: n/determin
vapor density: n/determin
spec gravity: 0.89
ph: na
viscosity: np
evaporation rate & reference: na
solubility in water: reacts.
appearance and odor: clear, yellow oily liquid.
percent volatiles by volume: n/detr
corrosion rate: np
Stability indicator/materials to avoid: yes
strong oxidizing agents.
stability condition to avoid: none specified by manufacturer.
hazardous decomposition products: carbon monoxide, carbon dioxide,
hydrogen cyanide.
Waste disposal methods: cure prod accordint to instructions.Incinerate
uncured waste in industrial/commercial incinerator.Dispo of
completely cure(or polymerized)matl in sanitary landfill.Dispo of
empty cans in sanitary land fill.Dispo alternative: incinerate in
industr(supp)
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: distillates, acid-treated heavy naphthenic
cas: 64742-18-3
rtecs #: py8032000
fraction by wt: 75-85%
other rec limits: none recommended
osha pel: 300 ppm
acgih tlv: 300 ppm
ingred name: aliphatic diisocyanate (m.W. >500)
cas: 68239-06-5
fraction by wt: 15-20%
other rec limits: none recommended
ingred name: hydrocinnamic acid, 3,5-di-tert-butyl-4-hydroxy-,octadecyl
ester
cas: 2082-79-3
fraction by wt: 1-5%
other rec limits: none recommended
Ld50 lc50 mixture: none specified by manufacturer.
routes of entry: inhalation: yes skin: yes ingestion: no
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: eye: mild irrit. Skin: mild
irrit.Prol/rep expo may cause allergic skin reaction.Inhal: health
effects from inhal are not expected unless product is heated.Vapors
of heated matl may cause respiratory sys tem irrit.Ingest: not
likely route of expo to this product.
effects of overexposure: eye: redness,swelling,pain,tearing.
skin: redness,swelling,itching. Allergic skin
reaction-redness,swelling,blistering,itching.Irrit resp tract.
medical cond aggravated by exposure: none specified by manufacturer.
First aid: eye: immed flush w/lg amts of water.Get immed med
attn.Skin: flush w/lg amts of water.Irrit persist get med attn.Imemd
wash w/soap/lg amts of water.Remove contamin cloth.Sign/sympt occur
call physician. Inhal: remove to fresh air.Not breath give art
resp.Diffi breath get immed med attn.Ingest: do not induce
vomit.Drink 2 glasses of water.Call physician.
Hcc: n1
boiling pt: b.P. Text: n/determine
melt/freeze pt: m.P/f.P text: n/determine
decomp temp: decomp text: np
vapor pres: n/determin
vapor density: n/determin
spec gravity: 0.90
ph: na
viscosity: np
evaporation rate & reference: na
solubility in water: insoluble.
appearance and odor: clear, oily liquid.
percent volatiles by volume: n/detr
corrosion rate: np
Stability indicator/materials to avoid: yes
strong oxidizing agents.
stability condition to avoid: none specified by manufacturer.
hazardous decomposition products: carbon monoxide, carbon dioxide,
hydrogen cyanide.
Waste disposal methods: cure prod accordint to instructions.Incinerate
uncured waste in industrial/commercial incinerator.Dispo of
completely cure(or polymerized)matl in sanitary landfill.Dispo of
empty cans in sanitary land fill.Dispo alternative: incinerate in
industr(supp)
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: polybutadiene resin
cas: 69102-90-5
fraction by wt: 60-70%
other rec limits: none recommended
ingred name: distillates, acid-treated heavy naphthenic
cas: 64742-18-3
rtecs #: py8032000
fraction by wt: 30-40%
other rec limits: none recommended
osha pel: 300 ppm
acgih tlv: 300 ppm