Worldwide distributor of NSN parts and consumables located in the USA.
A chemical composition formulated for coating or for filling voids, cracks, joints or seams of objects and/or materials to exclude foreign matter and/or prevent the transmission of fluids therethrough. It is not designed to act as a primer coating or to be sanded or ground after application. It cannot be wiped off. For items which are specifically compounded to provide electrical insulating characteristics, use insulating compound, electrical. Excludes caulking compound; gasket cement; corrosion preventive compound; cement, iron and steel; plumbing fixture setting compound; preservative coating, rubber and textile treating compounds.
Send us a request for quote using the form below. Our team will contact you with an up to date pricing and availability quote ASAP.
Caulking compounds
Glaziers' putty; grafting putty; resin cement, caulking compounds and other mastics; painters' fillings; nonrefractory surfacing preparations
Shingles, molding, wallboard
Y - Indicates information is in the hazardous materials information resource system (hmirs).
PMICA - Item does not contain precious metal.
CRITL- The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Questions & Answers: |
|
What are the historical prices recorded for this stock number? | |
No pre-dated pricing for this NSN could be found. | |
Does NSN 8030-01-163-3485 have a shelf life? | |
No. There is no shelf life applicable for this NSN. | |
What NATO entities are users of this NSN? | |
No recorded entities for this stock number. | |
What is the NIIN of NSN 8030-01-163-3485? | |
011633485 or 01-163-3485 | |
Does NSN 8030-01-163-3485 require demilitarization? | |
Yes - ITAR Controlled | |
What is the most recent solicitation for NSN 8030-01-163-3485? | |
No solicitations for this NSN. | |
When was this national stock number assigned to the federal catalog? | |
Oct 01, 1983 |
Health hazards acute and chronic: labored breathing, irritation of the
upper respiratory system, bronchitis. Over-exposure can lead to
allergenic sensitivity.
First aid: remove person to an uncontaminated area, administer oxygen if
necessary. For contact with skin, wash thoroughly with soap and
water. For eye contamination, irrigate eyes thoroughly with water
for 15 m inutes and get immediate medical attention. For ingestion,
if conscious give plenty of water to drink. Induce vomiting.
Boiling pt: b.P. Text: 406f,208c
vapor pres: 0.001
vapor density: > 1
spec gravity: 1.05
evaporation rate & reference: nil (butyl acetate)
solubility in water: insoluble
appearance and odor: clear amber liquid.
percent volatiles by volume: < 1
Stability indicator/materials to avoid: yes
avoid contact with moisture.
hazardous decomposition products: hcn, co, oxides of nitrogen and other
toxic gases.
Waste disposal methods: bury waste or dispose in accordance with
federal, state and local regulations of environmental control.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: polymeric diphenyl
cas: 9016-87-9
rtecs #: tr0350000
fraction by wt: 20-25%
other rec limits: none specified
ingred name: methylene bisphenyl isocyanate (mdi) (sara iii)
cas: 101-68-8
rtecs #: nq9350000
other rec limits: none specified
osha pel: c, 0.02 ppm
acgih tlv: 0.005 ppm; 9192
epa rpt qty: 1 lb
dot rpt qty: 1 lb
Health hazards acute and chronic: no evidence of toxicity due to
inhalation of vapors has been found under normal conditions.
First aid: wash affected skin areas with soap and water. For eye
contamination, irrigate eyes thoroughly with water for 15 minutes
and get immediate medical attention. For ingestion, if conscious,
give plenty of water and induce vomiting.
Boiling pt: b.P. Text: 610f,321c
vapor pres: 0.001
vapor density: > 1
spec gravity: 0.93
evaporation rate & reference: nil (butyl acetate)
solubility in water: negligible
appearance and odor: clear, amber liquid.
percent volatiles by volume: < 1
Stability indicator/materials to avoid: yes
hazardous decomposition products: co, oxides of nitrogen and other toxic
gases.
Waste disposal methods: bury waste or dispose in accordance with
federal, state and local regulations of environmental control.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: no hazardous ingredients in excess of 1% or carcinogenic
ingredients in excess of 0.1%.
other rec limits: none specified
Ld50 lc50 mixture: tlv: 0.01 ppm
routes of entry: inhalation: yes skin: yes ingestion: yes
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: acute: labored breathing, irritation
of upper respiratory system and bronchitis may occur if inhaled.
over-exposure may lead to allergic sensitivity.
explanation of carcinogenicity: no ingredient of a concentration of 0.1%
or greater is listed as a carcinogen or suspected carcinogen.
First aid: skin-wash thoroughly with soap and water. Inhaled-remove to
fresh air. Administer oxygen if needed. Get medical attention.
eyes-irrigate with water for 15 minutes & get immediate medical
attention. In gested-if conscious, give plenty of water. Induce
vomiting.
Boiling pt: b.P. Text: 406f,208c
vapor pres: 0.001
vapor density: >1.0
spec gravity: 1.05
evaporation rate & reference: nil (buac=1)
solubility in water: insoluble
appearance and odor: clear amber liquid
percent volatiles by volume:
Stability indicator/materials to avoid: yes
stability condition to avoid: avoid contact with moisture.
hazardous decomposition products: hydrogen cyanide, carbon monoxide,
oxides of nitrogen & other toxc gases.
Waste disposal methods: bury waste or dispose in accordance with local,
state and federal regulations of environmental control.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: polymeric diphenyl methane diisocyanate (mdi)
cas: 9016-87-9
rtecs #: tr0350000
fraction by wt: 20-25%
other rec limits: none recommended
Routes of entry: inhalation: no skin: yes ingestion: yes
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: no evidence of toxicity due to
inhalation of vapors has been found under normal conditions.
First aid: wash affected skin areas with soap and water. For eye
contamination, irrigate eyes thoroughly with water for 15 minutes
and get immediate medical attention. For ingestion, if conscious,
give plenty of water and induce vomiting.
Boiling pt: b.P. Text: 610f,321c
vapor pres: 0.001
vapor density: >1.0
spec gravity: 0.93
evaporation rate & reference: nil
solubility in water: negligible
appearance and odor: clear, amber liquid.
percent volatiles by volume:
Stability indicator/materials to avoid: yes
na
stability condition to avoid: na
hazardous decomposition products: co, oxides of nitrogen and other toxic
gases.
Waste disposal methods: bury waste or dispose in accordance with
federal, state and local regulations of environmental control.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: no hazardous ingredients in excess of 1% or carcinogenic
ingredients in excess of 0.1%.
other rec limits: none specified