Worldwide distributor of NSN parts and consumables located in the USA.
A chemical composition formulated for coating or for filling voids, cracks, joints or seams of objects and/or materials to exclude foreign matter and/or prevent the transmission of fluids therethrough. It is not designed to act as a primer coating or to be sanded or ground after application. It cannot be wiped off. For items which are specifically compounded to provide electrical insulating characteristics, use insulating compound, electrical. Excludes caulking compound; gasket cement; corrosion preventive compound; cement, iron and steel; plumbing fixture setting compound; preservative coating, rubber and textile treating compounds.
Send us a request for quote using the form below. Our team will contact you with an up to date pricing and availability quote ASAP.
Caulking compounds
Glaziers' putty; grafting putty; resin cement, caulking compounds and other mastics; painters' fillings; nonrefractory surfacing preparations
Shingles, molding, wallboard
Y - Indicates information is in the hazardous materials information resource system (hmirs).
PMICA - Item does not contain precious metal.
CRITL- The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Questions & Answers: |
|
What are the historical prices recorded for this stock number? | |
Historical data shows pricing from $252.52 to $420.86.. | |
Does NSN 8030-01-314-6116 have a shelf life? | |
No. There is no shelf life applicable for this NSN. | |
What NATO entities are users of this NSN? | |
No recorded entities for this stock number. | |
What is the NIIN of NSN 8030-01-314-6116? | |
013146116 or 01-314-6116 | |
Does NSN 8030-01-314-6116 require demilitarization? | |
Yes - ITAR Controlled | |
What is the most recent solicitation for NSN 8030-01-314-6116? | |
No solicitations for this NSN. | |
When was this national stock number assigned to the federal catalog? | |
Feb 02, 1990 |
Routes of entry: inhalation: yes skin: yes ingestion: yes
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: acute-eyes: irritation, eye damage.
skin: irritation, sensitization. Inhalation: mild irritation.
chronic-skin sensitization. Target organs- none listed.
effects of overexposure: irritation, red eyes, dry skin, itching.
medical cond aggravated by exposure: skin conditions, kidney or liver
diseases.
First aid: inhalation: remove to fresh air, provide cpr/oxygen if needed.
eye contact: flush with water for 15 minutes. Get medical help. Skin
contact: wash with soap and water. Get med attention if symptoms
persis t. Ingestion: do not induce vomiting, drink 1-2 glasses of
water. Get medical help immediately.
Hcc: f3
boiling pt: b.P. Text: >240f,>115c
vapor pres: 8
vapor density: 3.1
spec gravity: 2.3
evaporation rate & reference: 0.7 (butyl acetate=1)
solubility in water: slight
appearance and odor: dark grey viscous liquid, mild odor
Stability indicator/materials to avoid: yes
strong acids, alkalies, amines, oxidizing agents
stability condition to avoid: ignition sources
hazardous decomposition products: co2, co, toxic fumes when burning.
Waste disposal methods: dispose by controlled burning or authorized
landfill. Comply with all applicable federal, state & local
regulations.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: epoxy resin blend
other rec limits: none specified by m.
ingred name: xylenes (o-,m-,p- isomers) (sara iii)
cas: 1330-20-7
rtecs #: ze2100000
fraction by wt: 3%
other rec limits: none specified by m.
osha pel: 100 ppm/150 stel
acgih tlv: 100 ppm/150stel;9192
epa rpt qty: 1000 lbs
dot rpt qty: 1000 lbs
ingred name: propylene glycol monomethyl ether (ethoxy propanol)
cas: 1569-02-4
rtecs #: ub5250000
fraction by wt: 3%
other rec limits: none specified by m.
osha pel: 100 ppm/150 stel
acgih tlv: 100 ppm/150stel;9192
Routes of entry: inhalation: yes skin: yes ingestion: yes
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: acute- inhalation: irritation.
skin: irritation, burns. Eyes: irritation, damage. Chronic- skin
sensitization.
effects of overexposure: irritation, red eye, pain, dizziness, nausea,
vomiting.
medical cond aggravated by exposure: skin conditions.
First aid: inhalation: remove to fresh air, provide cpr/oxygen if needed.
eye contact: flush with water for 15 minutes. Get medical help. Skin
contact: wash with soap and water. Get med attention if symptoms
persis t. Ingestion: do not induce vomiting, drink 1-2 glasses of
water. Get medical help immediately.
Hcc: n1
spec gravity: 0.90
solubility in water: slight
appearance and odor: dark grey paste, amoniacal odor.
Stability indicator/materials to avoid: yes
strong acids, oxidizing agents
stability condition to avoid: ignition sources
hazardous decomposition products: co2, co, nox, toxic fumes when burning
Waste disposal methods: dispose by controlled burning or authorized
landfill. Comply with all applicable federal, state & local
regulations.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: fatty amido amine resin 85 +/- 5%
fraction by wt: 85+/-5%
other rec limits: irritant
ingred name: tetraethylene pentamine 10 +/- 4%
cas: 112-57-2
rtecs #: kh8585000
fraction by wt: 10+/-4%
other rec limits: corrosive