Worldwide distributor of NSN parts and consumables located in the USA.
A chemical composition formulated for coating or for filling voids, cracks, joints or seams of objects and/or materials to exclude foreign matter and/or prevent the transmission of fluids therethrough. It is not designed to act as a primer coating or to be sanded or ground after application. It cannot be wiped off. For items which are specifically compounded to provide electrical insulating characteristics, use insulating compound, electrical. Excludes caulking compound; gasket cement; corrosion preventive compound; cement, iron and steel; plumbing fixture setting compound; preservative coating, rubber and textile treating compounds.
Send us a request for quote using the form below. Our team will contact you with an up to date pricing and availability quote ASAP.
Caulking compounds
Glaziers' putty; grafting putty; resin cement, caulking compounds and other mastics; painters' fillings; nonrefractory surfacing preparations
Shingles, molding, wallboard
Y - Indicates information is in the hazardous materials information resource system (hmirs).
PMICU - Precious metal content is unknown
ADPE- Represents items with no adp components
CRITL- The item does not have a nuclear hardened feature but does have other critical featur (s) such as tolerance, fit restrictions or application.
103300 - Insulating material noi
713 - Metal hardware
9 - Other or no special handling required (sh)
A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
B - Construction materials: includes paint and related materials, prefabricated building, wood products, metal and composition mater
W - Rating variable
W - Rating variable
Z - No special type of cargo code applicable
Questions & Answers: |
|
What are the historical prices recorded for this stock number? | |
Historical data shows pricing from $328.05 to $546.75.. | |
Does NSN 8030-01-413-5871 have a shelf life? | |
No. There is no shelf life applicable for this NSN. | |
What NATO entities are users of this NSN? | |
Department Of The Navy, Brazil, Spain, and Netherlands | |
What is the NIIN of NSN 8030-01-413-5871? | |
014135871 or 01-413-5871 | |
Does NSN 8030-01-413-5871 require demilitarization? | |
Yes - ITAR Controlled | |
What is the most recent solicitation for NSN 8030-01-413-5871? | |
No solicitations for this NSN. | |
When was this national stock number assigned to the federal catalog? | |
May 17, 1995 |
Ld50 lc50 mixture: ld50: (oral,rat) 11400 mg/kg(epoxy resin)
routes of entry: inhalation: no skin: yes ingestion: no
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: acute: eye: mild irrit. Metal filler
particles could scratch cornea. Skin: minimal to mild irritation in
most people. Ingest: all ingredients are of low acute oral
toxicity. Chronic: approx 1% of work ers may become sensitized by
too much skin contact w/epoxy resins; itching, swelling/rashes
may(efts of overexp)
explanation of carcinogenicity: not relevant.
effects of overexposure: hlth haz: then result from further contact.
medical cond aggravated by exposure: allergies, eczema and other skin
disorders.
First aid: eye: flush w/clean water for at least 15 mins while gently
holding eyelids open. Get med attn. Skin: wash thoro w/soap & warm
water. Consult md if irrit develops. Inhal: remove patient to fresh
air. A dmin o*2 if brthg is difficult. Get medattn. Ingest: do not
induce vomiting. Dilute w/two glasses of water and get med attn.
Hcc: b3
vapor pres: nil @ 78
vapor density: >1
spec gravity: 2.8
ph: 7.0
evaporation rate & reference:
solubility in water: nil
appearance and odor: dark grey paste w/little odor.
Stability indicator/materials to avoid: yes
strong acids, bases and oxidizers.
stability condition to avoid: open flame and extreme heat.
hazardous decomposition products: oxides of carbon, aldehydes and acids
from imcomplete combustion.
conditions to avoid polymerization: heat is released when this resin is
mixed w/epoxy hardener. Use caution when mixing a pound or more.
Waste disposal methods: the resin contains no rcra/cercla listed
hazardous wastes. Dispose of in accordance w/local, state & federal
regulations.
Ingred name: bisphenol a-epichlorohydrin copolymer;(bisphenol a
diglycidyl ether resin)
cas: 25068-38-6
rtecs #: sl6475000
fraction by wt: 10-30%
osha pel: n/k
acgih tlv: n/k
Ld50 lc50 mixture: see ingredients
routes of entry: inhalation: yes skin: yes ingestion: yes
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: acute: eye: severe irritant. Skin:
moderate irritant. Inhal: irritation of nose & throat; nausea &
vomiting in severe cases. Ingest: may cause irritation of mouth and
throat and gastrointestinal tract . Chronic: rptd skin contact or
inhalation of fumes can cause sensitization w/itching, rashes,
swelling(efts of overexp)
explanation of carcinogenicity: not relevant.
effects of overexposure: hlth haz: of skin or an asthma-like respiratory
reaction on later exposure to the product. Prlngd/rptd overexp to
matl if sensit & allergic response. Those so affected should
consult md & avoid furthe r exposure to matl if sensitization is
confirmed.
medical cond aggravated by exposure: asthma, bronchitis, or skin
irritations.
First aid: eye: immed flush w/clean water for at least 15 mins while
gently holding eyelids open. Get med help as soon as poss. Skin:
immed remove contamd clthg & shoes & wash well w/soap & water. Seek
md if irr it develops. Inhal: remove patient to fresh air. Give
o*2/artf resp if needed. See md if symps persist. Ingest: do not
induce vomiting. Dilute w/lots of milk or water & get immed med
help.
Hcc: b3
boiling pt: b.P. Text: >450f,>232c
vapor pres:
vapor density: >1
spec gravity: 0.98
ph: 10-11
evaporation rate & reference:
solubility in water: 30-60%
appearance and odor: white paste w/mild ammonia-like odor.
Stability indicator/materials to avoid: yes
strong oxidizers, acids and chlorinated organic compounds.
stability condition to avoid: extreme heat or open flame.
hazardous decomposition products: acrid and toxic fumes w/organic
amines, ammonia, oxides of carbon and nitrogen.
conditions to avoid polymerization: heat is released when this product
is mixed w/epoxy resins; use care when mixing lge qtys.
Waste disposal methods: keep out of public water supplies. Incinerate in
approved facility where permitted by local, state & federal
regulations.
Ingred name: triethylenetetramine; (teta). Ld50: (oral,rat) 2500 mg/kg.
cas: 112-24-3
rtecs #: ye6650000
fraction by wt: 30-40%
osha pel: n/k
acgih tlv: n/k
ingred name: polyamide; (polyamide of c18 fatty -acid dimers & teta)
cas: 68082-29-1
fraction by wt: 40-60%
osha pel: n/k
acgih tlv: n/k
ingred name: phenol, nonyl-; (nonyl phenol)
cas: 25154-52-3
rtecs #: sm5600000
fraction by wt: 5-15%
osha pel: n/k
acgih tlv: n/k
ingred name: piperazine, 1-(2-aminoethyl)-; (n-aminoethylpiperazine).
ld50: (oral,rat) 2140 mg/kg.
cas: 140-31-8
rtecs #: tk8050000
fraction by wt: 1-10%
osha pel: n/k
acgih tlv: n/k