Worldwide distributor of NSN parts and consumables located in the USA.
A chemical composition formulated for coating or for filling voids, cracks, joints or seams of objects and/or materials to exclude foreign matter and/or prevent the transmission of fluids therethrough. It is not designed to act as a primer coating or to be sanded or ground after application. It cannot be wiped off. For items which are specifically compounded to provide electrical insulating characteristics, use insulating compound, electrical. Excludes caulking compound; gasket cement; corrosion preventive compound; cement, iron and steel; plumbing fixture setting compound; preservative coating, rubber and textile treating compounds.
Solicitation | Return by Date | Buyer Code | Quantity |
---|---|---|---|
SPE8ES18T7475 | 2018-07-02 | PEPCE | 216 KT |
Send us a request for quote using the form below. Our team will contact you with an up to date pricing and availability quote ASAP.
Caulking compounds
Glaziers' putty; grafting putty; resin cement, caulking compounds and other mastics; painters' fillings; nonrefractory surfacing preparations
Shingles, molding, wallboard
Y - Indicates information is in the hazardous materials information resource system (hmirs).
PMICA - Item does not contain precious metal.
ESDA - No known electrostatic discharge (esd) or electromagnetic interference (emi) sensitivity.
CRITL- The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
149610 - Caulking/glaziers compounds noi
621 - Paint
9 - Other or no special handling required (sh)
A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
C - Chemical corps items and all other chemicals not covered in other classificatons. note: when an item has a chemical proper shipp
R - Flammable liquids, un class 3 (flammable liquids label)
T - 55.0
Questions & Answers: |
|
What are the historical prices recorded for this stock number? | |
Historical data shows pricing from $309.50 to $515.84.. | |
Does NSN 8030-01-453-5933 have a shelf life? | |
No. There is no shelf life applicable for this NSN. | |
What NATO entities are users of this NSN? | |
Department Of The Army, Department Of The Air Force, U.s. Marine Corps, Department Of The Navy, General Services Administration, Spain, Australia, New Zealand, Republic Of Korea, Portugal, and Denmark | |
What is the NIIN of NSN 8030-01-453-5933? | |
014535933 or 01-453-5933 | |
Does NSN 8030-01-453-5933 require demilitarization? | |
Yes - ITAR Controlled | |
What is the most recent solicitation for NSN 8030-01-453-5933? | |
Solicitation SPE8ES18T7475 for qty 216 on 06/27/2018 | |
When was this national stock number assigned to the federal catalog? | |
Mar 05, 1998 |
Explanation of carcinogenicity: when heated to temperature above 180
degrees in the presence of air, product can form formaldehyde
vapors. Formaldehyde is a potential cancer hazard, a known skin and
respiratory sensitizer; and an ir ritant to the eyes, nose, throat,
skin, and digestive. Safe handling conditions may be maintained by
keeping vapor concentrations within the osha limit.
effects of overexposure: eye: direct contact irritate slightly with
redness and swelling. skin: a single relatively exposure can
causes no known adverse effect. Several repeated or prolonged
exposures (24 to 48 hours) may ir ritate. Product contains a
chromium compound, a possible skin sensitizer. inhalation:
irritates respiratory passages and eyes very slightly. oral: small
amounts transferred to the mouth by fingers d uring use, etc.,
should not injure. Swallowing large amounts may cause digestive
discomfort.
medical cond aggravated by exposure: formaldehyde is a potential cancer
hazard, known skin and respiratory sensitizer, irritant to eyes,
nose throat, skin, digestive system.
First aid: eyes: immediately flush with water for 15 minutes. skin:
remove from skin and immediately flush with water for 15 minutes.
get medical attention if irritation or ill effects develop or
persists. no first aid is needed for inhalation and oral.
Spec gravity: 1.30
appearance and odor: gray paste
Stability indicator/materials to avoid: yes
oxidizing material can cause a reaction.
Waste disposal methods: disposal of collected product, residues, and
cleanup materials may be governmentally regulated. Observe all
applicable local, state, and federal waste managements. Scrape up
and contain for salvage or disposal. Observe all personal
protection equipment re commendations. Local, state, and federal
rep orting requirements.
Ingred name: chromic oxide
cas: 1308-38-9
rtecs #: gb6475000
= wt: .3
ingred name: zinc oxide (zno)
cas: 1314-13-2
rtecs #: zh4810000
= wt: 25.
osha pel: 15 mg/m3
ingred name: hydrogenated castor oil
cas: 8001-78-3
rtecs #: fi4130000
= wt: 2.
ingred name: ethyl polysilicate
cas: 11099-06-2
= wt: 1.
Explanation of carcinogenicity: when heated to temperature above 180
degrees in the presence of air, product can form formaldehyde
vapors. Formaldehyde is a potential cancer hazard, a known skin and
respiratory sensitizer; and an ir ritant to the eyes, nose, throat,
skin, and digestive. Safe handling conditions may be maintained by
keeping vapor concentrations within the osha limit.
effects of overexposure: eye: direct contact irritate slightly with
redness and swelling. skin: a single short exposure can causes no
known adverse effect. Several repeated or prolonged exposures (24
to 48 hours) may irritat e. inhalation: irritates respiratory
passages and eyes very slightly. oral: small amounts transferred
to the mouth by fingers during use, etc., should not injure.
swallowing large amounts may cause digestive discomfort.
First aid: eyes: immediately flush with water for 15 minutes. skin:
remove from skin and immediately flush with water for 15 minutes.
get medical attention if irritation or ill effects develop or
persists. inh lalation: no first aid is needed. Oral: get medical
attention
Spec gravity: 1.30
viscosity: 10000.00 cp
appearance and odor: white viscous liquid
Stability indicator/materials to avoid: yes
oxidizing material can cause a reaction.
Waste disposal methods: disposal of collected product, residues, and
cleanup materials may be governmentally regulated. Observe all
applicable local, state, and federal waste managements. Scrape up
and contain for salvage or disposal. Observe all personal
protection equipment re commendations. Local, state, and federal
rep orting requirements.
Ingred name: dibutyltin diacetate
cas: 1067-33-0
rtecs #: wh6880000
= wt: 2.
ingred name: titanium dioxide
cas: 13463-67-7
rtecs #: xr2275000
= wt: 2.
osha pel: 15 mg/m3
acgih tlv: 10 mg/m3
Ld50 lc50 mixture: no data provided by manufacturer
routes of entry: inhalation: yes skin: yes ingestion: yes
health hazards acute and chronic: acute effects: eye: direct contact may
cause moderate irritation. Skin: may cause moderate irritation.
inhalation: irritates respiratory passages very slightly. Oral: low
ingestion hazard in normal us e.
explanation of carcinogenicity: no data provided by manufacturer
effects of overexposure: acute effects: eye: direct contact may cause
moderate irritation. Skin: may cause moderate irritation.
inhalation: irritates respiratory passages very slightly. Oral: low
ingestion hazard in normal us e. Prolonged/repeated exposure
effects: skin: no known applicable information. Inhalation: no
known applicable information. Oral: repeated ingestion or
swallowing large amounts may injure internally.
medical cond aggravated by exposure: no known applicable information.
First aid: eye: immediately flush with water for 15 minutes. Get medical
attention. Skin: remove from skin and wash thoroughly with soap and
water or waterless cleanser. Get medical attention if irritation or
ot her ill effects develop or persist. Inhalation: no first aid
should be needed. Oral: get medical attention. Comments: treat
according to person's condition and specifics of exposure.
Hcc: v7
boiling pt: >35.C, 95.F
melt/freeze pt: m.P/f.P text: not determined
vapor pres: @25c not determined.
vapor density: n/d
spec gravity: @25c: 1.3
ph: not determined
viscosity: 10,000 cp
solubility in water: not determined
appearance and odor: white viscous liquid. Odor: not reported.
percent volatiles by volume: n/d
Stability indicator/materials to avoid: yes
oxidizing material can cause a reaction. Water, moisture, or humid air
can cause hazardous vapors to form.
stability condition to avoid: stable.
hazardous decomposition products: thermal breakdown of product during
fire or very high heat conditions may evolve: silicon dioxide.
carbon oxides and traces of incompletely burned carbon compounds.
metal oxides. Quartz. Formaldehyde.
conditions to avoid polymerization: will not occur.
Waste disposal methods: rcra hazard class (40 cfr 261) when a decision
is made to discard this material, as received, is it classified as
a hazardous waste? No. state or local laws may impose additional
regulatory requireme nts regarding disposal. Call dow corning
corporate environmental management, (517) 496-6315, if addi tional
information is required.
Ingred name: dibutyltin diacetate
cas: 1067-33-0
rtecs #: wh6880000
minumum % wt: 1.
maxumum % wt: 5.
osha pel: 0.1 mg/m3 (skin)
acgih tlv: 0.1 mg/m3 (skin)
acgih stel: 0.2 mg/m3
Ld50 lc50 mixture: no data provided by manufacturer
routes of entry: inhalation: yes skin: yes ingestion: yes
health hazards acute and chronic: acute effects: eye: direct contact may
cause mild irritation. Skin: no significant irritation expected
from a single short-term exposure. Inhalation: no significant
effects expected from a single shor t-term exposure. Oral: low
ingestion hazard in normal use.Acute effects: eye: direct contact
may cause mild irritation. Skin: no significant irritation expected
from a single short-term exposure. Inha lation: no significant
effects expected from a single short-term exposure. Oral: low
ingestion hazard in normal use
explanation of carcinogenicity: no data provided by manufacturer
effects of overexposure: acute effects: eye: direct contact may cause
mild irritation. Skin: no significant irritation expected from a
single short-term exposure. Inhalation: no significant effects
expected from a single shor t-term exposure. Oral: low ingestion
hazard in normal use. Prolonged/repeated exposure effects: skin:
repeated skin contact may cause allergic skin reaction. Inhalation:
no known applicable informatio n. Oral: no known applicable
information.
medical cond aggravated by exposure: no known applicable information.
First aid: eye: immediately flush with water for 15 minutes. Skin:
remove from skin and immediately flush with water for 15 minutes.
get medical attention if irritation or other ill effects develop or
persist. I nhalation: no first aid should be needed. Oral: no first
aid should be needed. Comments: treat according to person's
condition and specifics of exposure.
Hcc: v7
boiling pt: b.P. Text: not determined
melt/freeze pt: m.P/f.P text: not determined
vapor pres: @25c not determined.
vapor density: n/d
spec gravity: @25c: 1.3
ph: not determined
viscosity: not determined.
solubility in water: not determined
appearance and odor: gray paste. Odor: not reported.
percent volatiles by volume: not determin
Stability indicator/materials to avoid: yes
oxidizing material can cause a reaction.
stability condition to avoid: stable.
hazardous decomposition products: thermal breakdown of product during
fire or very high heat conditions may evolve: silicon dioxide.
carbon oxides and traces of incompletely burned carbon compounds.
metal oxides. Quartz. Formaldehyde.
conditions to avoid polymerization: will not occur.
Waste disposal methods: rcra hazard class (40 cfr 261) when a decision
is made to discard this material, as received, is it classified as
a hazardous waste? No. State or local laws may impose additional
regulatory requiremen ts regarding disposal. Call dow corning
corporate environmental management, (517) 496-6315, if addit ional
information is required.
Ingred name: ethyl silicate
cas: 11099-06-2
minumum % wt: 1.
maxumum % wt: 5.
ingred name: chromic oxide
cas: 1308-38-9
rtecs #: gb6475000
< wt: 1.
Explanation of carcinogenicity: when heated to temperature above 180
degrees in the presence of air, product can form formaldehyde
vapors. Formaldehyde is a potential cancer hazard, a known skin and
respiratory sensitizer; and an ir ritant to the eyes, nose, throat,
skin, and digestive. Safe handling conditions may be maintained by
keeping vapor concentrations within the osha limits.
effects of overexposure: eye: direct contact irritate slightly with
redness and swelling. skin: a single relatively exposure can
causes no known adverse effect. Several repeated or prolonged
exposures (24 to 48 hours) may ir ritate. Product contains a
chromium compound, a possible skin sensitizer. inhalation:
irritates respiratory passages and eyes very slightly. oral: small
amounts transferred to the mouth by fingers d uring use, etc.,
should not injure. Swallowing large amounts may cause digestive
discomfort.
First aid: eyes: immediately flush with water for 15 minutes. skin:
remove from skin and immediately flush with water for 15 minutes.
get medical attention if irritation or ill effects develop or
persists. no first aid in needed for inhalation and oral.
Spec gravity: 1.30
appearance and odor: gray paste
Stability indicator/materials to avoid: yes
oxidizing material can cause a reaction.
stability condition to avoid: none
hazardous decomposition products: very high heat conditions may evolve
the following hazardous decomposition: metal oxides. Formaldehyde.
quartz. Carbon dioxide and traces of incompletely burned carbon
compounds. Silicon dioxide.
Ingred name: chromic oxide
cas: 1308-38-9
rtecs #: gb6475000
= wt: .3
ingred name: zinc oxide (zno)
cas: 1314-13-2
rtecs #: zh4810000
= wt: 25.
osha pel: 15 mg/m3
ingred name: ethyl silicate
cas: 11099-06-2
= wt: 1.
ingred name: hydrogenated castor oil
cas: 8001-78-3
rtecs #: fi4130000
= wt: 2.
Health hazards acute and chronic: small amounts transferred to the mouth
by fingers during use, etc., should not injure. Swallowing large
amounts may injure seriously.
explanation of carcinogenicity: when heated to temperature above 180
degrees in the presence of air, product can form formaldehyde
vapors. Formaldehyde is a potential cancer hazard, a known skin and
respiratory sensitizer; and an ir ritant to the eyes, nose, throat,
skin, and digestive. Safe handling conditions may be maintained by
keeping vapor concentrations within the osha limits.
effects of overexposure: eye: direct contact irritates moderately with
redness and swelling. skin: a single short exposure (less than 24
hours) may irritate. Repeated prolonged contact (24 to 48 hours)
may irritate moderatel y. inhalation: irritates respiratory
passages and eyes very slightly. oral: small amounts transferred
to the mouth by fingers during use, etc., should not injure.
swallowing large amounts may injure seriously.
First aid: eyes: immediately flush with water for 15 minutes. skin:
remove from skin and immediately flush with water for 15 minutes.
get medical attention if irritation or ill effects develop or
persists. no first aid in needed for inhalation. Oral: get
medical attention.
Spec gravity: 1.30
viscosity: 10000.00 cp
appearance and odor: white viscous liquid
Stability indicator/materials to avoid: yes
oxidizing material can cause a reaction.
stability condition to avoid: none
hazardous decomposition products: very high heat conditions may evolve
the following hazardous decomposition: silicon dioxide . Carbon
dioxide and traces of incompletely burned carbon compounds. Metal
oxides. Quartz. Formaldehyde
Waste disposal methods: disposal of collected product, residues, and
cleanup material may be governmentally regulated. Observe all
applicable local, state, and federal waste management. Mop up, or
wipe diposal. For large spi lls, provide diking or other
appropriate containment to keep material from spreading. Clean any
rema innig slippery surfaces by appropriate techniques.
Ingred name: dibutyltin diacetate
cas: 1067-33-0
rtecs #: wh6880000
= wt: 2.
ingred name: titanium dioxide
cas: 13463-67-7
rtecs #: xr2275000
= wt: 2.
osha pel: 15 mg/m3
acgih tlv: 10 mg/m3