Worldwide distributor of NSN parts and consumables located in the USA.
A substance compounded for binding materials together by surface attachment. It is not used primarily to fill voids or pores or for sealing purposes. Excludes canada balsam; cement, watch jewel; film cement, photographic; gasket cement; and gasket shellac compound.
The last inventory check on this NSN was done on 02/20/2024. Due to rapid changes in inventory this may not be the current stock qty.
Send us a request for quote using the form below. Our team will contact you with an up to date pricing and availability quote ASAP.
Y - Indicates information is in the hazardous materials information resource system (hmirs).
PMICU - Precious metal content is unknown
CRITL- The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
004620 - Adhesives: cements, glues, pastes noi
705 - Cement, liquid
9 - Other or no special handling required (sh)
A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
B - Construction materials: includes paint and related materials, prefabricated building, wood products, metal and composition mater
R - Flammable liquids, un class 3 (flammable liquids label)
W - Rating variable
Questions & Answers: |
|
What are the historical prices recorded for this stock number? | |
No pre-dated pricing for this NSN could be found. | |
Does NSN 8040-00-078-9774 have a shelf life? | |
No. There is no shelf life applicable for this NSN. | |
What NATO entities are users of this NSN? | |
Poland, Brazil, Spain, Singapore, New Zealand, France, Germany, Republic Of Korea, Italy, and Denmark | |
What is the NIIN of NSN 8040-00-078-9774? | |
000789774 or 00-078-9774 | |
Does NSN 8040-00-078-9774 require demilitarization? | |
Yes - ITAR Controlled | |
What is the most recent solicitation for NSN 8040-00-078-9774? | |
No solicitations for this NSN. | |
When was this national stock number assigned to the federal catalog? | |
Aug 11, 1967 |
Ld50 lc50 mixture: none specified by manufacturer.
routes of entry: inhalation: yes skin: yes ingestion: no
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: eye: direct contact irritates slightly
to moderately w/redness & swelling. Skin: single short exposure (
hours) may irritate. Repeated prolonged contact (24-48 hours) may
irritate moderately. Inhal: v apor overxposure may irritate eyes,
nose & throat. Ingest: small amounts transferred to mouth by (efts
of overexp)
explanation of carcinogenicity: not relevant
effects of overexposure: hlth haz: fingers during use, etc, should not
injure. Swallowing large amounts may cause digestive discomfort. No
injury from dusts should occur during reasonable use. If use
creates respirable particl es some respiratory system injury may
occur. Cured sealant is nonhazardous.
medical cond aggravated by exposure: this product as w/ any chemical,may
enhance allergic conditions on certain people.We do not know of any
medical conditions that might be aggravated by exposure to this
product(mfr).
First aid: eyes: flush w/ water for 15 minutes.Get medical
attention.Skin: wipe off and flush with water.Get medical attention
if irritation develops.Inhalation: remove to fresh air.Oral: no first
aid should be need ed (mfr).Ingest: contact physician
Hcc: v7
vapor pres:
vapor density: above 1
spec gravity: 1.04
solubility in water: < 0.1
appearance and odor: white paste; acetic acid-like odor.
percent volatiles by volume: wt
Stability indicator/materials to avoid: yes
oxidizing material can cause a reaction.Air or moisture causes curing
and acetic acid vapors form.
stability condition to avoid: exposure to air or moisture until ready to
use.
hazardous decomposition products: silicon dioxide, carbon dioxide &
traces of incompletely burned carbon products.
Waste disposal methods: dow corning suggests that all local,state and
federal regulations concerning health and pollution be reviewed to
determine approved disposal procedures.Contact dow corning if there
are any disposal qu estions.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: methyltriacetoxysilane (osha pel,acgih tlv,stel 15 ppm are
for acetic acid)
cas: 4253-34-3
rtecs #: vv4500000
fraction by wt: 2%
osha pel: 10 ppm
acgih tlv: 10 ppm
ingred name: ethyltricetoxysilane (osha pel,acgih tlv,stel 15 ppm are
for acetic acid)
cas: 17689-77-9
fraction by wt: 2%
osha pel: 10 ppm
acgih tlv: 10 ppm
ingred name: silica, amorphous, dust
cas: 112945-52-5
rtecs #: vv7310000
fraction by wt: 11%
osha pel: 6 mg/m3
acgih tlv: 10 mg/m3
ingred name: polymer; (polydimethylsiloxane, hydroxy-terminated)
cas: 70131-67-8
osha pel: n/k
acgih tlv: n/k
ingred name: silicon fluid; (polydimethylsiloxane)
cas: 63148-62-9
osha pel: n/k
acgih tlv: n/k
ingred name: dimethyl cylcosiloxanes
cas: 69430-24-6
osha pel: n/k
acgih tlv: n/k
Ld50 lc50 mixture: none specified by manufacturer.
routes of entry: inhalation: yes skin: yes ingestion: yes
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: acute: eye: direct contact irritates
moderately with redness and swelling. Skin: a single short exposure
(less than 24 hours) may irritate. Repeated prolonged contact (24
to 48 hours) may irritate mod erately. Inhalation: vapor
overexposuremay irritate eyes, nose and throat. Ingestion: small
amounts (efts of overexp)
explanation of carcinogenicity: not relevant
effects of overexposure: hlth haz: transferred to the mouth by fingers
during use, etc, should not injure. Swallowing large amounts may
cause digestive discomfort.
medical cond aggravated by exposure: none specified by manufacturer.
First aid: ingest: call md immediately . Eyes: immediately flush with
water for at least 15 minutes. Get medical attention. Skin: remove
from skin and wash thoroughly with soap and water or waterless
clean ser. Get medical attention if irritation or other ill effects
develop or persist. Inhal: remove to fresh air. Comments: treat
according to person's condition and specifics of exposure.
Spec gravity: 1.04
solubility in water: none
appearance and odor: white paste; acetic acid odor.
Stability indicator/materials to avoid: yes
oxidizing material can cause a reaction.
stability condition to avoid: acetic acid is formed upon contact with
water, moisture or humid air.
hazardous decomposition products: thermal breakdown of this prod during
fire/very high heat cndtns may evolve following haz decomp prods:
silicon (supdat)
Waste disposal methods: disposal of collected product, residues and
cleanup materials may be governmentally regulated. Observe all
applicable local, state and federal waste management regulations.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: silane, methyltriacetoxy-; (methyltriacetoxysilane)
cas: 4253-34-3
rtecs #: vv4500000
fraction by wt: 2%
osha pel: n/k
acgih tlv: n/k
ingred name: silica, amorphous fumed; (silica, amorphous)
cas: 112945-52-5
rtecs #: vv7310000
fraction by wt: 11%
osha pel: 6 mg/m3
acgih tlv: 10 mg/m3
ingred name: ethyltriacetoxysilane
cas: 17689-77-9
fraction by wt: 2%
osha pel: n/k
acgih tlv: n/k
ingred name: polydimethylsiloxane; (dimethyl siloxane,
hydroxy-terminated)
cas: 70131-67-8
fraction by wt: 81%
osha pel: n/k
acgih tlv: n/k
ingred name: dow corning 200 fluid; (polydimethylsiloxane)
cas: 63148-62-9
rtecs #: jj6484500
fraction by wt: 1%
osha pel: n/k
acgih tlv: n/k
Ld50 lc50 mixture: none specified by manufacturer.
routes of entry: inhalation: yes skin: yes ingestion: yes
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: acute: eye: direct contact irritates
moderately with redness and swelling. Skin: a single short exposure
(less than 24 hours) may irritate. Repeated prolonged contact
(24-48 hours) may irritate modera tely. Inhalation: vapor
overexposure may irritate eyes, nose and throat. Ingestion: small
amounts (efts of overexp)
explanation of carcinogenicity: not relevant
effects of overexposure: hlth haz: transferred to the mouth by fingers
during use, etc, should not injure. Swallowing large amounts may
cause digestive discomfort. Repeated exposure effects: none known.
medical cond aggravated by exposure: none specified by manufacturer.
First aid: ingest: call md immediately . Eyes: immediately flush with
water for at least 15 minutes. Get medical attention. Skin: remove
from skin and wash thoroughly with soap and water or waterless
clean ser. Get medical attention if irritation or other ill effects
develop or persist. Inhal: remove to fresh air. Comments: treat
according to person's condition and specifics of exposure.
Spec gravity: 1.04
solubility in water: none
appearance and odor: white paste; acetic acid odor.
Stability indicator/materials to avoid: yes
oxidizing material can cause a reaction.
stability condition to avoid: acetic acid is formed upon contact with
water, moisture or humid air.
hazardous decomposition products: thermal breakdown of prod during
fire/very high heat cndtns may evolve following haz decomp prods:
silicon (supdat)
Waste disposal methods: observe all applic local, state & fed waste
management regs. When decision is made to discard this matl, as
received, it is not classifed a haz waste. State & local laws may
impose addnl regulatory re qs regarding disp. Call dow corning
(supdat)
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: silane, methyltriacetoxy-; (methyltriacetoxysilane)
cas: 4253-34-3
rtecs #: vv4500000
fraction by wt: 2%
osha pel: n/k
acgih tlv: n/k
ingred name: silica, amorphous fumed; (silica, amorphous)
cas: 112945-52-5
rtecs #: vv7310000
fraction by wt: 11%
osha pel: 6 mg/m3
acgih tlv: 10 mg/m3
ingred name: ethyltriacetoxysilane
cas: 17689-77-9
fraction by wt: 2%
osha pel: n/k
acgih tlv: n/k
ingred name: polydimethylsiloxane; (dimethyl siloxane,
hdyroxy-terminated)
cas: 70131-67-8
fraction by wt: 81%
osha pel: n/k
acgih tlv: n/k
ingred name: dow corning 200 fluid; (polydimethylsiloxane)
cas: 63148-62-9
rtecs #: jj6484500
fraction by wt: 11%
osha pel: n/k
acgih tlv: n/k