NationalStockNumber.INFO
Worldwide distributor of NSN parts and consumables located in the USA.
Worldwide distributor of NSN parts and consumables located in the USA.
A substance compounded for binding materials together by surface attachment. It is not used primarily to fill voids or pores or for sealing purposes. Excludes canada balsam; cement, watch jewel; film cement, photographic; gasket cement; and gasket shellac compound.
Send us a request for quote using the form below. Our team will contact you with an up to date pricing and availability quote ASAP.
Y - Indicates information is in the hazardous materials information resource system (hmirs).
PMICA - Item does not contain precious metal.
CRITL- The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
004620 - Adhesives: cements, glues, pastes noi
705 - Cement, liquid
9 - Other or no special handling required (sh)
A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
B - Construction materials: includes paint and related materials, prefabricated building, wood products, metal and composition mater
R - Flammable liquids, un class 3 (flammable liquids label)
W - Rating variable
Questions & Answers: |
|
| What are the historical prices recorded for this stock number? | |
| Historical data shows pricing from $1,571.60 to $2,619.34.. | |
| Does NSN 8040-00-109-8101 have a shelf life? | |
| No. There is no shelf life applicable for this NSN. | |
| What NATO entities are users of this NSN? | |
| Singapore, France, Germany, Republic Of Korea, Greece, and Turkey | |
| What is the NIIN of NSN 8040-00-109-8101? | |
| 001098101 or 00-109-8101 | |
| Does NSN 8040-00-109-8101 require demilitarization? | |
| Yes - ITAR Controlled | |
| What is the most recent solicitation for NSN 8040-00-109-8101? | |
| No solicitations for this NSN. | |
| When was this national stock number assigned to the federal catalog? | |
| Aug 09, 1968 | |
Effects of overexposure: skin & eye irritants.May cause skin
sensitization or other allergic response.See sup data**
First aid: eye: flush with water 15 min,seek medical attention.Skin: wash
with mild soap & water,seek medical attn.Ingestion: seek immediate
medical attn.
Hcc: n1
solubility in water: negligible
appearance and odor: viscous liquid purple color slight musty odor
May react exothermically with acids,bases or strong oxid agt
hazardous decomposition products: acids,aldehydes,co & co*2
Waste disposal methods: in accordance with federal,state & local
regulation.Recommend reacting waste resin & catalyst prior to
disposal.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: epoxy resin
ingred name: amorphous silica (see sup data)*
fraction by wt: 4%
acgih tlv: 20 mppcf(mfr)
ingred name: silica, amorphous, dust
cas: 112945-52-5
rtecs #: vv7310000
fraction by wt:
other rec limits: see sup dat
osha pel: 6 mg/m3
acgih tlv: 10 mg/m3; 8990
Effects of overexposure: skin/eye irritants.May cause skin sensitization
or other allergic response. Oral: ld/50(rat)-15g/kg
First aid: eye: flush with water 15 min,seek medical attention.Skin: wash
with soap & water,seek medical attention.Ingestion: seek immediate
medical attn.
Hcc: n1
solubility in water: negligible
appearance and odor: viscous liquid,tan color,slight musty odor
Acids,bases or strong oxidizing agents
hazardous decomposition products: acids,aldehydes,co & co*2
Waste disposal methods: in accordance with federal,state,& local
regulations.Recommend reacting waste resin & catalyst prior to
disposal.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: polyamide resin catalyst
ingred name: amorphous silica (see sup data)*
fraction by wt: 4%
acgih tlv: 20 mppcf (mfr)
Routes of entry: inhalation: yes skin: yes ingestion: yes
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: acute: eye cntct: this matl is an eye
irrit. Direct cntct w/liq/expos to vap/mist may cause stinging,
tearing, redness, & swelling. Cntct w/molten matl may cause thermal
burns. Pers w/pre-existing eye disorders may be more susceptible
to efts of this matl. Skin: this matl is a skin irrit. Direct
cntct/expos to vap/mists may cause redness & burning & skin dmg.
rptd cntct may cause allergic skin rxn in sensitized individuals.
pers w/pre-existing skin disorders may be more susceptible to efts
of this matl. No harmful efts are expected from skin absorption of
matl. Cntct w/molten matl may cause th ermal burns. (efts of
overexp)
explanation of carcinogenicity: the ingredients of this product, present
or equal to or greater than 0.1% of the product, are not listed by
osha, ntp, or iarc as suspect carcinogens.
effects of overexposure: hlth haz: ingest: ingest of this matl is highly
unlikely. However, if swallowed, this prod is expected to have a
low degree of tox by ingest. Inhal: because of its low volatility,
expos to vaps is unl ikely. In common w/most org matls, thermal
degradation & combustion byprods may be tox & should not be
inhaled. See comments below & thermal degradation & combust on
byprods section for more specific info. Chronic: component of part
a of this prod (bisphenol a-epichlorohydrin expoxy resin) is
positive in in vitro microbial mutagenicity screening (supdat)
First aid: eyes: hold eyelids apart & flush affected eye(s) immed
w/clean h*2o for at least 15 min. Seek immed med attn. Skin: flush
w/plenty of h*2o & wash affected area(s) w/soap & h*2o. Remove
contamd clthg & wash before reuse. Thoroughly clean shoes before
reuse. Contamd leather articles, including shoes, cannot be
decontaminated & should be destroyed to pvnt reuse. If irrit
persists, seek med attn. If c ntct w/prod occurs, immed flush
w/cool h*2o for 15 min. Carefully remove clthg,if clthg is stuck to
a burned area do not pull it off, but cut around it. Cover burned
area w/clean matl & seek med attn immed. (other info)
Hcc: n1
boiling pt: >260.C, 500.F
vapor pres: 0.03 mm hg @ 77c
spec gravity: 1.17 (water =1)
solubility in water: negligible
appearance and odor: viscous purple liquid. No odor.
Stability indicator/materials to avoid: yes
avoid contact with strong oxidizers, acids, and bases, especially
primary and secondary aliphatic amines.
stability condition to avoid: avoid excessive heat for prolonged periods
of time.
hazardous decomposition products: thermal degradation & combustion
byproducts: thermal degradation & combustion byprod may be tox &
should not be inhaled. Thermal degradation is not significant at
temp achieved during (tox info)
conditions to avoid polymerization: haz polymerization will not occur,
polymerization may occur above 500f. Some curing agents, eg, (tox
info)
Waste disposal methods: this product is a non-hazardous waste in
accordance with u.S. Epa regulations. Classification according to
all federal, local and state hazardous waste regulation is required
before disposal.
Ingred name: bisphenol a-epichlorohydrin epoxy resin (part a)
cas: 25068-38-6
rtecs #: ce6880000
Routes of entry: inhalation: yes skin: yes ingestion: yes
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: acute: eye cntct: this matl is severe
eye irrit. Direct cntct w/liq/expos to vap/mist may cause stinging,
tearing, redness, & swelling. Pers w/pre-existing eye disorders may
be more susceptible to eft s of this matl. Skin: this matl may
cause mild skin irrit. Prolonged/repeated contact or exposure to
vapors/ mist may cause redness and burning. Persons with
pre-existing skin disorders may be more su sceptible to the effects
of this mateiral. Contact may result in skin absorptionbut symptoms
of tox are not anticipated by this route alone under normal
conditions of use. (efts of overexp)
explanation of carcinogenicity: the ingredients of this product, present
or equal to or greater than 0.1% of the product, are not listed by
osha, ntp, or iarc as suspect carcinogens.
effects of overexposure: hlth haz: ingest: this matl may be fatal or
harmful if swallowed. Ingestion may result in severe irritation and
burns of the mouth, throat, and digestive tract. inhal: exposure
to vapors or fumes may cause irritation of the resp tract.
chronic: a component of part b (polyamide resin) is also suspected
of being able to cause change in the genetic material (dna) of a
cell. what these findings mea n to humans is uncertain. Comments:
overheating matl (other info)
medical cond aggravated by exposure: pre-existing lung disorders (e.G.
asthma-like conditions) may be aggravated by exposure to this matl.
First aid: eyes: hold eyelids apart & flush affected eye(s) immed
w/clean h*2o for at least 15 min. Seek immed med attn. Skin: flush
w/plenty of h*2o & wash affected area(s) w/soap & h*2o. Remove
contamd clthg & wash before reuse. Thoroughly clean shoes before
reuse. Contamd leather articles, including shoes, cannot be
decontaminated & should be destroyed to pvnt reuse. If irrit
persists, seek med attn. If c ntct w/prod occurs, immed flush
w/cool h*2o for 15 min. Carefully remove clthg,if clthg is stuck to
a burned area do not pull it off, but cut around it. Cover burned
area w/clean matl & seek med attn immed. (other info)
Spec gravity: 0.97 (water =1)
solubility in water: 1-10%
appearance and odor: tan liquid. Odor of ammonia.
percent volatiles by volume: 0 @ 70f
Stability indicator/materials to avoid: yes
part b: none known.
stability condition to avoid: avoid excessive heat for prolonged periods
of time.
hazardous decomposition products: thermal degradation & combustion
byproducts: thermal degradation & combustion by prod may be tox &
should not be inhaled. Thermal degradation is not significant at
temp achieved during (tox info)
conditions to avoid polymerization: haz polymerization will not occur,
polymerization may occur above 500f. Some curing agents, eg, (tox
info)
Waste disposal methods: this product is a non-hazardous waste in
accordance with u.S. Epa regulations. Classification according to
all federal, local and state hazardous waste regulation is required
before disposal.
Ingred name: amines, polyethylenepoly-, reaction products with
c18-unsatd. Fatty acid dimers; (polyamide/amine blend)(part b)
cas: 68410-23-1