NationalStockNumber.INFO
Worldwide distributor of NSN parts and consumables located in the USA.
Worldwide distributor of NSN parts and consumables located in the USA.
A substance compounded for binding materials together by surface attachment. It is not used primarily to fill voids or pores or for sealing purposes. Excludes canada balsam; cement, watch jewel; film cement, photographic; gasket cement; and gasket shellac compound.
The last inventory check on this NSN was done on 11/07/2022. Due to rapid changes in inventory this may not be the current stock qty.
Send us a request for quote using the form below. Our team will contact you with an up to date pricing and availability quote ASAP.
Y - Indicates information is in the hazardous materials information resource system (hmirs).
PMICA - Item does not contain precious metal.
CRITL- The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
004620 - Adhesives: cements, glues, pastes noi
705 - Cement, liquid
9 - Other or no special handling required (sh)
A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
B - Construction materials: includes paint and related materials, prefabricated building, wood products, metal and composition mater
R - Flammable liquids, un class 3 (flammable liquids label)
W - Rating variable
Questions & Answers: |
|
| What are the historical prices recorded for this stock number? | |
| Historical data shows pricing from $0.08 to $0.14.. | |
| Does NSN 8040-00-111-6522 have a shelf life? | |
| No. There is no shelf life applicable for this NSN. | |
| What NATO entities are users of this NSN? | |
| Taiwan, Province Of China, Singapore, Germany, Republic Of Korea, Portugal, Greece, and Turkey | |
| What is the NIIN of NSN 8040-00-111-6522? | |
| 001116522 or 00-111-6522 | |
| Does NSN 8040-00-111-6522 require demilitarization? | |
| Yes - ITAR Controlled | |
| What is the most recent solicitation for NSN 8040-00-111-6522? | |
| No solicitations for this NSN. | |
| When was this national stock number assigned to the federal catalog? | |
| May 01, 1974 | |
Effects of overexposure: may cause eye irritation, skin sensitization,
or pther allergic responses. Spi skin hazard class 4.
First aid: wash skin immediately with soap and water. Flush eyes
immediately with plenty of water.
Hcc: n1
boiling pt: b.P. Text: decomposes
spec gravity: 1.55
evaporation rate & reference: na
solubility in water: negligible
appearance and odor: viscous green paste with slight odor.
Stability indicator/materials to avoid: no
stability condition to avoid: follow recommended storage conditions. See
section ix.
hazardous decomposition products: compounds of carbon and nitrogen.
conditions to avoid polymerization: avoid heating large masses too high
in temperature.
Waste disposal methods: land burial
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: epoxy resins
fraction by wt: 58%
ingred name: asbestos (amianthus, obsolete amosite), (for osha pel, see
29cfr 1910.1101)
cas: 1332-21-4
rtecs #: ci6475000
fraction by wt: 14%
osha pel: 0.2 fibers/cc
acgih tlv: 0.5 fibers/cc; a1;89
epa rpt qty: 1 lb
dot rpt qty: 1 lb
ingred name: fillers
fraction by wt: 28%
Effects of overexposure: may cause eye irritation, skin sensitization,
or other allergic responses. Spi skin hazard class 4.
First aid: wash skin immediately with soap and water. Flush eyes
immediately with plenty of water.
Hcc: n1
boiling pt: b.P. Text: decomposes
spec gravity: 0.96
solubility in water: slight
appearance and odor: green-liquid with ammoniacal odor.
Stability indicator/materials to avoid: no
stability condition to avoid: follow recommended storage conditions. See
section ix.
hazardous decomposition products: compounds of carbon and nitrogen.
conditions to avoid polymerization: avoid heating large masses too high
in temperature.
Waste disposal methods: land burial.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: catalyst
fraction by wt: 99%
ingred name: pigment
fraction by wt: 1%
Effects of overexposure: eye, skin & gastrointestinal irritation.
possible skin sensitization in some indivduals.
First aid: eye: flush 10 min w/copious water. Skn: wash w/soap & water.
launder contam clothing before reuse. Inges, inhl: no action
indicated.
Hcc: n1
spec gravity: 1.2
solubility in water: nil
appearance and odor: viscous cream colored liquid w/ low odor.
percent volatiles by volume: 0
Stability indicator/materials to avoid: yes
hazardous decomposition products: co, co*2, smoke when subjected to
excessive heat or flame.
Waste disposal methods: manufacturer recommend commercial incineration
with destruction & removal efficiency at 100%. Otherwise, dispose
in landfill or municipal refuse incinerator. Disposal methods must
be iaw federals, sta te & local regulations.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: epichlorohydrin/bisphenol a epoxy resin (ansi class ii)
fraction by wt: 73%
ingred name: amorphous fused silica (when combined with curative- 27% of
product)
rtecs #: vv7320000
acgih tlv: 20 mppcf
ingred name: curative
Routes of entry: inhalation: yes skin: yes ingestion: yes
health hazards acute and chronic: may cause eye and skin irritation and
possible allergic reactions. Prolonged and repeated contact may
cause sensitization which will result in allergic reactions. Avoid
contact with eyes or skin.
effects of overexposure: skin rash, irritation.
First aid: flush skin and eye contact with plenty of water. Wash
thoroughly with soap and water, rubbing alcohol or hand cleaner. Do
not use solvents. Remove soiled clothing and wash before reuse. If
irritation persists, see physician.
Hcc: b2
boiling pt: b.P. Text: decomposes
vapor pres:
vapor density: nil
spec gravity: >1
evaporation rate & reference: nil
solubility in water: nil
appearance and odor: viscous gray paste with slight odor.
percent volatiles by volume:
Stability indicator/materials to avoid: yes
strong oxidizing agents, strong lewis or mineral acids.
hazardous decomposition products: co, nox, aldehydes, acids and
undetermined organics.
conditions to avoid polymerization: mixing resin/curing agent in batches
greater than 1 lb. Do not heat mixed adhesive unless curing
surfaces to be bonded.
Waste disposal methods: dispose of as hazardous waste according to
federal, state and local regulations.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: epoxy resin system
ingred name: silica
cas: 112945-52-5
rtecs #: vv7310000
osha pel: 20 mppcf
acgih tlv: 0.1 mg/m3
ingred name: aluminum (sara iii)
cas: 7429-90-5
rtecs #: bd0330000
fraction by wt:
osha pel: 15mg/m3 dust/5 fume
acgih tlv: 10mg/m3 dust; 9192
ingred name: 4-glycidyloxy-n,n-diglycidylaniline
cas: 5026-74-4
fraction by wt:
ingred name: voc
rtecs #: 9999999vo
Routes of entry: inhalation: yes skin: yes ingestion: yes
health hazards acute and chronic: material is corrosive to skin. May
cause chemical burn to eyes and skin. Repeat contact may cause
sensitization. Vapors irritating and may cause chest discomfort and
bronchitis symptoms.Prolonged or r epeated exposure may cause
allergic reactions.
effects of overexposure: possible burns to eyes and skin; irritation and
possible sensitization to skin. Vapors may be irritating to upper
respiratory tract.
First aid: flush skin and eye contact with plenty of water. Wash
thoroughly with soap and water, rubbing alcohol or hand cleaner. Do
not use solvents. Remove soiled clothing and wash before reuse. If
irritation persists, see physician.
Hcc: b2
boiling pt: b.P. Text: 405f,207c
vapor pres: 0.37mm
vapor density: 3.48
spec gravity: 0.951
evaporation rate & reference: nil
solubility in water: 100%
appearance and odor: green liquid with ammoniacal odor
Stability indicator/materials to avoid: yes
strong oxidizing agents, strong lewis or mineral acids.
hazardous decomposition products: co, nox, aldehydes, acids and
undetermined organics.
conditions to avoid polymerization: mixing resin/curing agent in batches
greather than 1 lb. Do not heat mixed adhesive unless curing
surfaces to be bonded.
Waste disposal methods: dispose of as hazardous waste according to
federal, state and local regulations.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: epoxy resin system
ingred name: diethylene triamine
cas: 111-40-0
rtecs #: ie1225000
fraction by wt: < 15%
osha pel: 1 ppm
acgih tlv: s, 1 ppm; 9192
ingred name: triethylenetetramine
cas: 112-24-3
rtecs #: ye6650000
fraction by wt: < 10%
ingred name: voc
rtecs #: 9999999vo
Routes of entry: inhalation: yes skin: yes ingestion: yes
health hazards acute and chronic: asbestos is considered a carcinogen.
however, as the asbestos is fully encapsulated by the adhesive, no
exposure should occur unless the cured adhesive is dry sanded or
abraded without proper local ex haust vent & toxic particle
respirators. Repeated/prolonged contact may cause sensitization
result in allergic reactions
effects of overexposure: skin rash, irritation
First aid: flush skin & eye contact with plenty of water. Wash skin
thoroughly with soap & water, rubbing alcohol or hand cleaner. Do
not use solvents. Remove soiled clothing & wash before reuse. If
irritation p ersists, see physician.
Hcc: b2
boiling pt: b.P. Text: decomposes
vapor pres: < 0.01 mm
vapor density: nil
spec gravity: > 1
evaporation rate & reference: nil
solubility in water: nil
appearance and odor: viscous gray paste with slight odor
Stability indicator/materials to avoid: yes
strong oxidizing agents, strong lewis or mineral acids.
stability condition to avoid: avoid mixing resin & curing agent in
batches > 1 lb total. Don't heat mixed adhesive > 125 f unless
curing surfaces....
hazardous decomposition products: co, nox, aldehydes, acids and
undetermined organics.
conditions to avoid polymerization: ..To be bonded. Failure to observe
caution may result in excessive heat build-up with the release of
toxic gasses.
Waste disposal methods: dispose of as hazardous waste according to
local, state & federal regulations.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: epoxy resin system
other rec limits: none specified
ingred name: asbestos (sara 313)
cas: 1332-21-4
rtecs #: ci6475000
fraction by wt: < 15%
other rec limits: none specified
osha pel: 0.2 fibers/cc
acgih tlv: 2 fibers/cc
epa rpt qty: 1 lb
dot rpt qty: 1 lb
ingred name: aluminum powder
cas: 7429-90-5
rtecs #: bd0330000
fraction by wt: < 30%
other rec limits: none specified
osha pel: 5 mg/m3
acgih tlv: 5 mg/m3
ingred name: 4-glycidyloxy-n,n-diglycidylaniline
cas: 5026-74-4
fraction by wt: < 35%
other rec limits: none specified
ingred name: voc: < 10 g/l (estimate)
rtecs #: 9999999vo
other rec limits: none specified
Routes of entry: inhalation: yes skin: yes ingestion: yes
health hazards acute and chronic: material is corrosive to skin. May
cause chemical burn to eyes and skin. Repeat contact may cause
sensitization. Vapors irritating and may cause chest discomfort and
bronchitis symptoms.
effects of overexposure: possible burns to eyes and skin; irritation and
possible sensitization to skin. Irritation to upper respiratory
tract.
First aid: flush skin and eye contact with plenty of water. Wash
thoroughly with soap and water, rubbing alcohol or hand cleaner. Do
not use solvents. Remove soiled clothing and wash before reuse. If
irritation persists, see a physician.
Hcc: b2
boiling pt: b.P. Text: 405f,207c
vapor pres: 0.37mm
vapor density: 3.48 air=1
spec gravity: 0.951
evaporation rate & reference: nil
solubility in water: 100 %
appearance and odor: green liquid with ammoniacal odor
Stability indicator/materials to avoid: yes
strong oxidizing agents, strong lewis or mineral acids.
stability condition to avoid: avoid mixing resin & curing agent in
batches > 1 lb total. Don't heat mixed adhesive unless curing
surfaces to be bonded
hazardous decomposition products: co, nox, aldehydes, acids and
undetermined organics.
conditions to avoid polymerization: failure to observe caution may
result in excessive heat build-up with the release of toxic gases.
Waste disposal methods: dispose of as hazardous waste according to
local, state & federal regulations.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: epoxy resin system
other rec limits: none specified
ingred name: diethylenetriamine
cas: 111-40-0
rtecs #: ie1225000
fraction by wt: < 15%
other rec limits: none specified
osha pel: 1 ppm
acgih tlv: 1 ppm
ingred name: triethylenetetramine
cas: 112-24-3
rtecs #: ye6650000
fraction by wt: < 10%
other rec limits: none specified
ingred name: voc: < 10 g/l estimate
rtecs #: 9999999vo
other rec limits: none specified
ld50 lc50 mixture: mixture has not been tested as a whole.
route of entry inds - inhalation: yes
skin: yes
ingestion: no
carcinogenicity inds - ntp: no
iarc: no
osha: no
effects of exposure: brief contact may irrit skin or cause a rash. Repeated or
prolonged skin contact may result in allergic sensitization.
explanation of carcinogenicity: neither this material nor any of its components
is considered a carcinogen.
signs and symptions of overexposure: skin rash, irritation.
medical cond aggravated by exposure: skin sensitization.
first aid: eye: flush w/water for 15mins. If irrit persists get med attn.
skin: wash thoroughly w/soap & water. If irrit persists get med attn.
inhal: remove victim to fresh air. If symptoms persist get med attn. I
ngest: drink plenty of water. Get med attn immed.
hcc: b3
b.P. Text: undefined
decomp text: untested
vapor pres: nil
vapor density: >1
spec gravity: 1.55
viscosity: 7500-15000*
solubility in water: negligible.
appearance and odor: viscous gray paste, slight odor.
corrosion rate: na
product id: hysol ea 9300na (as9257016) part a
cage: 33564
company name: dexter corporation adhesive & coating systems
street: 2850 willow pass road
po box: 312
city: bay point ca
zipcode: 94565-3299
health emergency phone: 800-424-9300(chemtrec)
label required ind: y
date of label review: 12/16/1998
status code: c
label date: 12/16/1998
origination code: g
hazard and precautions: brief contact may irrit skin or cause a rash. Repeated
or prolonged skin contact may result in allergic sensitization.
sk in rash,
irritation.
=======================================================
responsible party cage: 33564
trans id no: 48131
product id: hysol ea 9300na (as9257016) part a
msds prepared date: 04/01/1993
review date: 02/20/1996
mfn: 3
multiple kit number: 0
kit part ind: y
review ind: y
unit of issue: kt
container qty: 0
additional data: un 2735 packing group 2.
=======================================================
stability indicator: yes
stability condition to avoid: avoid mixing parts a&b in batches >1lb & heating
mixture >125f.
materials to avoid: strong oxidizing agents, strong lewis or mineral acids.
hazardous decomposition products: co, nox, aldehydes, acids & undetermined
organics.
hazardous polymerization indicator: yes
conditions to avoid polymerization: no information provided by mfg.
spill release procedures: wear protective clothing, gloves & safety
glasses. Scrape up or shovel into dot approved waste containers.
waste disposal methods: not rcra haz waste.However, incineration in epa
approved waste incinerator is preferred.Chem additions/ processing/ otherwise
altering matl may make waste management infor herein incomplete/ inaccurat
e/inappropriate.Consult state/loc regulations.
handling and storage precautions: refrigerated storage is recommended to
maintain product quality. This product may be stored @ (40f) for up to 12
months.
other precautions: follow curing schedule as recommended in product
literature.Don't cut/grind/weld/drill on/near container.Avoid mixing parts
a&b in batches >1lb unless plan to use immed.Don't heat mixed adhesive
>75f unless curing surfaces to be bonded.
hcc: b2
b.P. Text: 405f,207c
vapor density: >1.0
spec gravity: 0.96
ph: notest
viscosity: 1.0-35.0 brk.
solubility in water: 100%
appearance and odor: amber liquid, ammoniacal odor
corrosion rate: na
product id: hysol ea 9300na system part b (as9257016)
cage: 33564
company name: dexter corporation adhesive & coating systems
street: 2850 willow pass road
po box: 312
city: bay point ca
zipcode: 94565-3299
health emergency phone: 800-424-9300(chemtrec)
label required ind: y
date of label review: 12/16/1998
status code: c
label date: 12/16/1998
origination code: g
=======================================================
responsible party cage: 33564
trans id no: 48132
product id: hysol ea 9300na system part b (as9257016)
msds prepared date: 04/01/1993
review date: 02/22/1996
mfn: 4
multiple kit number: 0
kit part ind: y
review ind: y
unit of issue: kt
container qty: 0
=======================================================
stability indicator: yes
stability condition to avoid: don't mix batches a&b >1lb unless used
immediately. Don't heat mixed adhesive >125f unless curing surfaces to be
bonded.
materials to avoid: strong oxidizing agents, strong lewis or mineral acids.
route of entry inds - inhalation: yes
skin: yes
ingestion: yes
carcinogenicity inds - ntp: no
iarc: no
osha: no
effects of exposure: may be corrosive to eyes & skin. May cause chemical
burns. Vapors & mists will irritate nose & throat. Skin contact may
result in burns, possible allergic sensitization. Chest discomfort.
medical cond aggravated by exposure: skin sensitization.
first aid: eye: flush w/water for 15 mins. Get med attn. Skin: wash thoroughly
w/soap & water. Get med attn. Inhal: remove to fresh air. Get med attn.
ingest: drink plenty of water. Get med attn immed.
b.P. Text: 405f,207c
vapor pres: 0.37
vapor density: 3.48
spec gravity: 0.96
voc grams/liter: 10
viscosity: *
solubility in water: 100%
appearance and odor: green liquid w/ammoniacal odor
corrosion rate: na
product id: hysol ea 9300na as9257016
cage: 33564
company name: dexter corporation adhesive & coating systems
street: 2850 willow pass road
po box: 312
city: bay point ca
zipcode: 94565-3299
health emergency phone: 800-424-9300(chemtrec)
label required ind: y
date of label review: 10/12/1999
status code: a
origination code: g
hazard and precautions: may be corrosive to eyes & skin. May cause chemical
burns. Vapors & mists will irritate nose & throat. Skin contact may
result in burns, possible allergic sensitization. Chest discomfort.
=======================================================
responsible party cage: 33564
trans id no: 48133
product id: hysol ea 9300na as9257016
msds prepared date: 01/01/1995
review date: 05/20/1997
mfn: 5
multiple kit number: 0
kit part ind: y
review ind: y
unit of issue: kt
container qty: 0
additional data: *viscosity: 1-35 brookfield, pdl 2
=======================================================
stability indicator: yes
stability condition to avoid: avoid mixing parts a&b in batches >1lb unless
using immed. Dont heat mixture >125f unless curing surfaces to be bonded.
materials to avoid: strong oxidizing agents, strong lewis or mineral acids.
hazardous decomposition products: co, nox, aldehydes, acids & undetermined
organics.
hazardous polymerization indicator: yes
spill release procedures: wear protective clothing, gloves & safety
glasses. Absorb spill w/absorbent material. Scrape up or shovel into dot
approved waste containers.
neutralizing agent: na
waste disposal methods: not rcra haz waste. However, incineration in epa
approved waste incinerator is preferred. Chem additions/processing/otherwise
altering material may make waste management info herein incomplete/inaccur
ate/inappropriate. Consult state/loc regulations.
handling and storage precautions: product may be stored at room temperature for
up to 12 months. Keep container tightly closed when not in use.
other precautions: follow curing schedule/mixing ratios as recommended in
product literature. Empty containers retain product residue so obey hazard
warnings and handle empty containers as if they were full. Don't cut, grind,
weld or drill on/near container.