NationalStockNumber.INFO
Worldwide distributor of NSN parts and consumables located in the USA.
Worldwide distributor of NSN parts and consumables located in the USA.
A substance compounded for binding materials together by surface attachment. It is not used primarily to fill voids or pores or for sealing purposes. Excludes canada balsam; cement, watch jewel; film cement, photographic; gasket cement; and gasket shellac compound.
The last inventory check on this NSN was done on 09/20/2022. Due to rapid changes in inventory this may not be the current stock qty.
Send us a request for quote using the form below. Our team will contact you with an up to date pricing and availability quote ASAP.
Y - Indicates information is in the hazardous materials information resource system (hmirs).
PMICA - Item does not contain precious metal.
CRITL- The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
004620 - Adhesives: cements, glues, pastes noi
705 - Cement, liquid
9 - Other or no special handling required (sh)
A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
B - Construction materials: includes paint and related materials, prefabricated building, wood products, metal and composition mater
R - Flammable liquids, un class 3 (flammable liquids label)
W - Rating variable
Questions & Answers: |
|
| What are the historical prices recorded for this stock number? | |
| No pre-dated pricing for this NSN could be found. | |
| Does NSN 8040-00-116-0853 have a shelf life? | |
| No. There is no shelf life applicable for this NSN. | |
| What NATO entities are users of this NSN? | |
| Spain, New Zealand, and Germany | |
| What is the NIIN of NSN 8040-00-116-0853? | |
| 001160853 or 00-116-0853 | |
| Does NSN 8040-00-116-0853 require demilitarization? | |
| Yes - ITAR Controlled | |
| What is the most recent solicitation for NSN 8040-00-116-0853? | |
| No solicitations for this NSN. | |
| When was this national stock number assigned to the federal catalog? | |
| Feb 14, 1973 | |
Effects of overexposure: strong sensitizer (spi class 4) and corrosive
to eyes
First aid: if contact occurs wash skin w/soap & water. Flush eyes
immediately w/plenty of water for at least 15 minutes. Remove
contaminated clothing. Get medical attention.
Hcc: n1
boiling pt: b.P. Text: decomp bfor
spec gravity: 0.96
solubility in water: slightly so
appearance and odor: amber liquid w/ammonical odor
Stability indicator/materials to avoid: yes
hazardous decomposition products: compounds of carbon & nitrogen
conditions to avoid polymerization: will exotherm w/epoxies
Waste disposal methods: landfill controlled burning as regulated by all
governmental agencies.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: vehicle
fraction by wt: 100%
Routes of entry: inhalation: yes skin: yes ingestion: yes
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: may cause skin irritation and possible
allergic reactions. Prolonged and repeated contact may cause
sensitization which will result in allergic reactions.
effects of overexposure: skin rash, irritation.
medical cond aggravated by exposure: na
First aid: flush skin and eye contact with plenty of water. Wash
thoroughly with soap and water, rubbing alcohol or hand cleaner. Do
not use solvents. Remove soiled clothing and wash before reuse. If
irritation persists, see physician.
Hcc: v7
boiling pt: b.P. Text: decomposes
vapor pres:
vapor density: nil
spec gravity: >1
evaporation rate & reference: nil
solubility in water: nil
appearance and odor: viscous gray paste with slight odor
percent volatiles by volume: na
Stability indicator/materials to avoid: yes
strong oxidizing agents, strong lewis or mineral acids.
stability condition to avoid: na
hazardous decomposition products: co, no2, aldehydes, acids and
undetermined organics.
conditions to avoid polymerization: avoid mix resin/curing agent in
batches more than 1 lb ttl. Do not heat mixed adhesive >125f unless
curing surfaces to
Waste disposal methods: dispose of as hazardous waste according to
federal, state and local regulations.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: epoxy resin system
fraction by wt: na
other rec limits: none specified
ingred name: silica
cas: 112945-52-5
rtecs #: vv7310000
fraction by wt: < 10%
other rec limits: none specified
osha pel: 20 mppcf
acgih tlv: 0.1 mg/m3
ingred name: aluminum (sara iii)
cas: 7429-90-5
rtecs #: bd0330000
fraction by wt: < 35%
other rec limits: none specified
osha pel: 15mg/m3 dust/5 fume
acgih tlv: 10mg/m3 dust; 9192
ingred name: voc: < 10 g/l (estimate)
rtecs #: 9999999vo
other rec limits: none specified
Routes of entry: inhalation: yes skin: yes ingestion: yes
reports of carcinogenicity: ntp: yes iarc: yes osha: yes
health hazards acute and chronic: acute hazards of the mixture include
poisoning; corrosive to skin and eyes. Breathing of vapors may
cause delayed or serious injury to the liver and spleen (toxic
hepatitis).
explanation of carcinogenicity: methylenedianiline is a suspect
carcinogen.
effects of overexposure: possible burns to eyes and skin; irritation to
upper respiratory tract. Skin will turn yellow/brown at site of
contact with mixture.
First aid: immediately flush eyes with water for 15 minutes. Flush skin
with water. Wash area of contact with soap and water, rubbing
alcohol or hand cleaner. Do not use solvents. Remove contaminated
clothing an d leather goods and dispose of as hazardous waste. If
irritation persists, see physician.
Hcc: t2
boiling pt: b.P. Text: >300f,>149c
vapor pres: 0.1
vapor density: nil
spec gravity: 1.15
evaporation rate & reference: nil
solubility in water: partial
appearance and odor: reddish-black liquid
percent volatiles by volume: na
Stability indicator/materials to avoid: yes
strong oxidizing agents, strong lewis or mineral acids.
stability condition to avoid: none
hazardous decomposition products: co, no2, aldehydes, acids and
undetermined organics.
conditions to avoid polymerization: avoid mixing resin and and curing
agent in batches greater than 1 pound total. Do not heat mix above
100f unless curing
Waste disposal methods: dispose of as hazardous waste according to
federal, state and local regulations.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: 4,4'-methylene dianiline (sara iii)
cas: 101-77-9
rtecs #: by5425000
fraction by wt: < 35%
other rec limits: none specified
acgih tlv: s; 0.1 ppm; a2; 9192
epa rpt qty: 1 lb
dot rpt qty: 1 lb
ingred name: 2,4-diaminoanisole (sara iii)
cas: 615-05-4
rtecs #: bz8580500
fraction by wt: < 35%
other rec limits: none specified
ingred name: m-phenylenediamine
cas: 108-45-2
rtecs #: ss7700000
fraction by wt: < 35%
other rec limits: none specified
acgih tlv: 0.1 mg/m3; 9192
ingred name: voc: < 10 g/l
rtecs #: 9999999vo
other rec limits: none specified
Routes of entry: inhalation: yes skin: yes ingestion: no
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: immediate effects: brief contact may
irritate the skin or cause a rash. Long term effects: repeated or
prolonged skin contact may result in allergic sensitization.
effects of overexposure: skin rash, irritation.
medical cond aggravated by exposure: skin sensitization
First aid: eye: flush eyes with water for 15 minutes. If irritation
persists, get medical attention. Skin: wash skin thoroughly with
soap and water. If irritation persists, get medical attention.
inhalation: rem ove victim to fresh air. If symptoms persist. Get
medical attention. Ingestion: drink plenty of water. Get medical
attention immediately.
Hcc: t4
vapor pres: nil
vapor density: > 1 air= 1
spec gravity:
viscosity: 3000-65000 p.
solubility in water: negligible
appearance and odor: viscous gray paste with slight odor
Stability indicator/materials to avoid: yes
strong oxidizing agents, strong lewis or mineral acids.
stability condition to avoid: avoid mixing resin (part a) & curing agent
(part b) in batches > 1 lb unless you plan to use immediately.
hazardous decomposition products: co, nox, aldehydes, acids and
undetermined organics.
conditions to avoid polymerization: don't heat mixed adhesive > 125f
unless curing surfaces to be bonded. Failure to observe these
precautions may result...
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: bishphenol a/ epichlorohydrin epoxy resin
cas: 25068-38-6
rtecs #: kc2100000
fraction by wt: 40-70%
other rec limits: none specified
ingred name: aluminum powder
cas: 7429-90-5
rtecs #: bd0330000
fraction by wt: 15-40%
other rec limits: none specified
osha pel: 5 mg/m3
acgih tlv: 5 mg/m3
ingred name: silicon dioxide
cas: 112945-52-5
rtecs #: vv7318000
fraction by wt: 5-10%
other rec limits: none specified
osha pel: 6 mg/m3
acgih tlv: 6 mg/3m
ingred name: voc: < 10 g/l (estimate) (test method)
rtecs #: 9999999vo
other rec limits: none specified
ld50 lc50 mixture: mixture has not been tested as a whole.
route of entry inds - inhalation: yes
skin: yes
ingestion: no
carcinogenicity inds - ntp: no
iarc: yes
osha: no
effects of exposure: material is corrosive to eyes & skin. Brief contact
may cause chemical burns. Vapors & mists will irritate nose & throat.
repeated or prolonged skin contact may result in burns and possible allergic
s ensitization.
explanation of carcinogenicity: ingred 2 & 3: iarc grp.2 b mat'l. Pos human
carcinogen. Ingred 1: iarc grp 3 mat'l. (not human carcinogen).
signs and symptions of overexposure: possible burns to eyes/skin; irritation to
upper respiratory tract. Skin will turn yellow/brown at site of contact
w/mixture.
medical cond aggravated by exposure: skin sensitization.
first aid: eye: flush w/lots of running water for 15 mins. Get med attn immed.
skin: wash thoroughly w/soap & water. If irrit persists get med attn.
inhal: remove victim to fresh air. If symptoms persist get med attn. Ingest:
drink plenty of water. Get med attn immed.
b.P. Text: undefined
spec gravity: 1.15
ph: notest
viscosity: 3.0-6.0 brk.
solubility in water: partial
appearance and odor: reddish-black liquid
corrosion rate: na
product id: hysol ea 901ma/l-3, as9196016
cage: 33564
company name: dexter corporation adhesive & coating systems
street: 2850 willow pass road
po box: 312
city: bay point ca
zipcode: 94565-3299
health emergency phone: 800-424-9300 (chemtrec)
label required ind: y
date of label review: 12/16/1998
status code: c
label date: 12/16/1998
origination code: g
hazard and precautions: immediate effects: acute hazards of this material may
include poisoning. Possible burns to eyes & skin. Long term effects:
breathing of vapors may cause delayed or serious injury to the liver &
spleen (toxic hepatitis).
possible burns to eyes & skin; irritation to
upper respiratory tract. Skin will turn yellow/brown at site of contact with
mixture.
=======================================================
responsible party cage: 33564
trans id no: 48448
product id: hysol ea 901ma/l-3, as9196016
msds prepared date: 08/01/1994
review date: 05/23/1997
mfn: 6
multiple kit number: 0
kit part ind: y
review ind: y
=======================================================
stability indicator: yes
stability condition to avoid: don't mix batches a&b >1lb unless used
immediately. Don't heat mixed adhesive >100f unless curing surfaces to be
bonded.
materials to avoid: strong oxidizing agents, strong lewis or mineral acids.
hazardous decomposition products: co, nox, aldehydes, acids & undetermined
organics.
hazardous polymerization indicator: yes
spill release procedures: wear protective clothing, gloves & safety
glasses. Absorb spill with absorbent material such as vermiculite or sand.
scrape up or shovel into dot approved waste containers.
waste disposal methods: matl not rcra haz waste. However, incineration in epa
approved waste incinerator preferred. Chem additions/processing/otherwise
altering matl may make waste mgmt info herein incomplete/inaccurate/inap
propriate.Consult state/local regs.
handling and storage precautions: prod may be stored @ rm temp for up to 12
mos. Keep cntnrs tightly closed when not in use. Empty cntnrs retain residue;
handle as if full.
other precautions: follow curing schedule/ratio as recommended in product
literature.Don't cut/grind/weld/drill on/near container.Avoid mixing parts
a&b in batches >1lb unless plan to use immed.Don't heat mixed adhesive
unless curing surfaces to be bonded.