NationalStockNumber.INFO
Worldwide distributor of NSN parts and consumables located in the USA.
Worldwide distributor of NSN parts and consumables located in the USA.
A substance compounded for binding materials together by surface attachment. It is not used primarily to fill voids or pores or for sealing purposes. Excludes canada balsam; cement, watch jewel; film cement, photographic; gasket cement; and gasket shellac compound.
Send us a request for quote using the form below. Our team will contact you with an up to date pricing and availability quote ASAP.
Y - Indicates information is in the hazardous materials information resource system (hmirs).
PMICA - Item does not contain precious metal.
CRITL- The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
004620 - Adhesives: cements, glues, pastes noi
705 - Cement, liquid
9 - Other or no special handling required (sh)
A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
B - Construction materials: includes paint and related materials, prefabricated building, wood products, metal and composition mater
R - Flammable liquids, un class 3 (flammable liquids label)
W - Rating variable
Questions & Answers: |
|
| What are the historical prices recorded for this stock number? | |
| Historical data shows pricing from $5,298.03 to $8,830.06.. | |
| Does NSN 8040-00-133-5501 have a shelf life? | |
| No. There is no shelf life applicable for this NSN. | |
| What NATO entities are users of this NSN? | |
| Singapore, Germany, United Kingdom, Italy, and Turkey | |
| What is the NIIN of NSN 8040-00-133-5501? | |
| 001335501 or 00-133-5501 | |
| Does NSN 8040-00-133-5501 require demilitarization? | |
| Yes - ITAR Controlled | |
| What is the most recent solicitation for NSN 8040-00-133-5501? | |
| No solicitations for this NSN. | |
| When was this national stock number assigned to the federal catalog? | |
| Mar 03, 1974 | |
Effects of overexposure: eyes: irrit. Skin: mod irrit to albino rabbits.
poss sensitization in certan indiv. Avoid dust, vap
First aid: eyes: immed flush w/plenty of water for 10 min & call md.
skin: wash thoroughly w/soap & water before adhesive cures. Launder
contam clothing before reuse. Inh: avoid vapors of heated product.
avoid d ust of cured adhes when grinding or sawing.
Hcc: n1
spec gravity: 1.15
solubility in water: slight
appearance and odor: cream colored viscous paste
percent volatiles by volume: 0
Stability indicator/materials to avoid: no
strong oxidizing agents
stability condition to avoid: expos to temp above room temp for prlngd
periods of time.
conditions to avoid polymerization: elevated storage temperatures
Waste disposal methods: mfr recm incinerate if iaw fed, state & local
codes.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: epichlorohydrin/polyhydroxyl polymer (w/polyglycol
diepoxide resin - approx 77%)
ingred name: polyglycol diepoxide resin (w/epichlorohydrin/polyhydroxyl
polymer - approx 77%)
ingred name: phenyl glycidyl ether (pge)
cas: 122-60-1
rtecs #: tz3675000
osha pel: 10 ppm
acgih tlv: 1 ppm; 9293
ingred name: 1,4 butanediol diglycidyl ether (combined w/other ingreds,
forms approx 21% of product)
ingred name: dicyandiamide (combined w/other ingred. Forms approx 21% of
the product)
SCOTCHWELD 2214 ADHESIVE REGULAR
Effects of overexposure: eye,skn: irrt,poss sensitization.Inh: none
expected @ room temp. Sens/irrt from curing vapors or dust
First aid: eye: flush 10 min w/copious water.Call phys.Skn: wash
soap/water.Remove contam clothing. Inh: remove to fresh air, call
phys if breathing difficult. Ingest: no toxic effects expected.
Hcc: n1
spec gravity: 1.44
solubility in water: very slight
appearance and odor: gray viscous paste
percent volatiles by volume: 0
Stability indicator/materials to avoid: no
strong oxidants
stability condition to avoid: prolonged storage at elevated temp.
hazardous decomposition products: co,co*2,n,hcn possible when exp to
excessive heat/flame.
conditions to avoid polymerization: elevated storage temp.
Waste disposal methods: commercial incineration at 99.99% eff or
reclamation is preferred. Landfill or other disposal iaw
loc/state/fed regs only.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: dicyandiamide, al powder, syn rubber, amorphous silica
mixture (50-52%)
ingred name: epoxy resin blend, diluent, polyglycol diepoxideresin blend
(45-47%)
ingred name: 3-(p-chlorophenyl)-1-1-dimethyl urea (cas: 150-68-5)(2-4%)
see other precautions.
cas: 150-68-5
rtecs #: ys6300000
acgih tlv: n/d
Routes of entry: inhalation: yes skin: yes ingestion: no
health hazards acute and chronic: eye contact: direct contact may cause
irritation. Skin contact: may cause irritation. May be absorbed
through the skin and may cause sensitization in some individuals.
inhalation: at room temperature, no toxic effects expected.
inhalation of vapors during curing operations may cause respiratory
system irritation and *
explanation of carcinogenicity: 3-(p-chlorophenyl)-1-1-dimethyl urea has
been shown to be a suspect carcinogen based on lab animal studies.
effects of overexposure: *sensitization in some individuals. Dust from
grinding, sawing and cutting operations may cause irritation.
ingestion: no toxic effects expected.
First aid: eye contact: flush eyes immediately with plenty of water for
10 minutes and call a physician. Skin contact: wash affected area
with soap and water. Remove contaminated clothing.
inhalation: provide fresh air. If breathing is difficult
provideoxygen and call a physician. If swallowed: no toxic effects
expected.
Spec gravity: 1.44
viscosity: *
solubility in water: very slight
appearance and odor: gray viscous paste
percent volatiles by volume: 0
Stability indicator/materials to avoid: no
strong oxidizing aagents.
stability condition to avoid: prolonged storage at temperatures above
normal room temperature.
hazardous decomposition products: co, co2 and nitrogen decomposition
products, including the possibility of hcn,when subjected to
excessive heat or flame.
conditions to avoid polymerization: elevated storage temperatures.
Waste disposal methods: commercial incinerations w/destruction,removal
efficiency greater than 99.99% or reclam is preferred.If allowed by
local regs,waste can be landfilled after curing accord to
instruct.Otherwise dispose in accordance w/local & current
environmental regs
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: synthetic rubber
other rec limits: none specified
ingred name: aluminum (sara iii)
cas: 7429-90-5
rtecs #: bd0330000
other rec limits: none specified
osha pel: 15mg/m3 dust/5 fume
acgih tlv: 10mg/m3 dust; 9192
ingred name: dicyandiamide
other rec limits: none specified
ingred name: amorphous silica
cas: 63231-67-4
rtecs #: vv7340000
other rec limits: none specified
ingred name: total of the above is 50.0-52.0%
rtecs #: 9999999zz
other rec limits: none specified
ingred name: epoxy resin blend
other rec limits: none specified
ingred name: epoxy diluent
other rec limits: none specified
ingred name: polyglycol diepoxide resin blend
other rec limits: none specified
ingred name: total of the above is 45.0-47.0%
rtecs #: 9999999zz
other rec limits: none specified
ingred name: 3-(p-chlorophenyl)
cas: 150-68-5
rtecs #: ys6300000
fraction by wt: 2.0-4.0%
other rec limits: none specified
ingred name: 1-1-dimethyl urea
cas: 598-94-7
rtecs #: ys9867985
other rec limits: none specified