NationalStockNumber.INFO
Worldwide distributor of NSN parts and consumables located in the USA.
Worldwide distributor of NSN parts and consumables located in the USA.
A compound of nonspecific materials primarily designed to be applied to a surface to increase adhesion of an adhesive compound.
The last inventory check on this NSN was done on 08/17/2023. Due to rapid changes in inventory this may not be the current stock qty.
Send us a request for quote using the form below. Our team will contact you with an up to date pricing and availability quote ASAP.
Organic composite solvents and thinners, not elsewhere specified or included; prepared paint or varnish removers
Organic composite solvents and thinners, n.E.S.; prepared paint or varnish removers
Chemicals-other
Y - Indicates information is in the hazardous materials information resource system (hmirs).
PMICA - Item does not contain precious metal.
CRITL- The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
004620 - Adhesives: cements, glues, pastes noi
705 - Cement, liquid
9 - Other or no special handling required (sh)
A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
B - Construction materials: includes paint and related materials, prefabricated building, wood products, metal and composition mater
R - Flammable liquids, un class 3 (flammable liquids label)
W - Rating variable
Questions & Answers: |
|
| What are the historical prices recorded for this stock number? | |
| Historical data shows pricing from $702.96 to $1,171.60.. | |
| Does NSN 8040-00-139-3708 have a shelf life? | |
| No. There is no shelf life applicable for this NSN. | |
| What NATO entities are users of this NSN? | |
| Spain, New Zealand, France, Germany, and Netherlands | |
| What is the NIIN of NSN 8040-00-139-3708? | |
| 001393708 or 00-139-3708 | |
| Does NSN 8040-00-139-3708 require demilitarization? | |
| Yes - ITAR Controlled | |
| What is the most recent solicitation for NSN 8040-00-139-3708? | |
| No solicitations for this NSN. | |
| When was this national stock number assigned to the federal catalog? | |
| Feb 18, 1974 | |
Effects of overexposure: irritates skin/eyes.May cause slight
anesthesia,headaches,etc.
First aid: skin/eyes: flush w/water. Inhal: remove to fresh air.Obtain
medical attention.
Hcc: f2
boiling pt: b.P. Text: 205f,96c
vapor pres: 45.
vapor density: >1.0
spec gravity: 0.71
evaporation rate & reference:
solubility in water:
appearance and odor: liquid some color, sol.Odor.
percent volatiles by volume: 75.0
Stability indicator/materials to avoid: yes
oxidizing & corrosive material.
stability condition to avoid: source of ignition.
hazardous decomposition products: metal oxides,co*2 & trcs. Of
incompletely burned products.
Waste disposal methods: review all local,state, & fed regs to determine
approved solvent disposal procedures.However,dow recommends
landfill & incineration methods iaw local regs.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: n-heptane
cas: 142-82-5
rtecs #: mi7700000
fraction by wt: 80%
osha pel: 500 ppm/500 stel
acgih tlv: 400 ppm/500stel;9293
ingred name: silicone adhesive material, type not specified.
fraction by wt: 20%
Routes of entry: inhalation: yes skin: yes ingestion: yes
health hazards acute and chronic: eye: burn, severe irrit or permanent
injury. Skin: single short exposure (
prolonged/repeated irritates seriously, burn mildly. Absorbed:
internal injury. Inhal: drowsiness, irrit n ose & throat. Oral:
small amts: blindness, death. Inhal liq: injure lungs seriously.
First aid: eyes: immediately flush w/water 15 min. Get med aid. Skin:
immed wipe off. Flush w/water 15 min. Get med aid if ill effects
develop. Inhal: remove to fresh air. Get med aid if ill effects
persist. Ora l. Get medical aid. Do not induce vomiting. Attending
physician should determine need to induce vomiting. If vomiting
occurs. Keep head lower than hips to prevent inhalation of liquid.
Hcc: f2
boiling pt: b.P. Text: 210f,99c
vapor pres: 94 mm
vapor density: 3.4
spec gravity: 0.71 @ 77f
solubility in water: less than 0.1%
appearance and odor: solvent odor, clear liquid.
Stability indicator/materials to avoid: yes
oxidizing material can cause a reaction. Reacts with water, acids etc.
liberating methyl alcohol.
stability condition to avoid: exposure to materials to avoid, and to air
until ready to use.
hazardous decomposition products: metal oxides, silicon dioxide, carbon
dioxide, and traces of incompletely burned carbon products.
Waste disposal methods: dow corning suggests that all local, state, and
federal regulations concerning health/polution be reviewed to
determine approved disposal procedures. Contact dow corning if
there are any disposal ques tions. Epa hzd # d001, ignitable.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: heptane
cas: 142-82-5
rtecs #: mi7700000
fraction by wt: 87%
other rec limits: none specified
osha pel: 500 ppm/500 stel
acgih tlv: 400 ppm/500stel;9293
ingred name: allyltrimethoxysilane (observe limits for methyl alcohol,
formed on exposure to water or humid air)
cas: 2551-83-9
fraction by wt: 8%
other rec limits: none specified
osha pel: 200 ppm/250 ppm stel
acgih tlv: 200 ppm/250 ppm stel
ingred name: tetrabutyl titanate (observe limits for n-butyl alcohol,
formed on exposure to water or humid air)
cas: 5593-70-4
rtecs #: xr1585000
fraction by wt: 5%
other rec limits: none specified
osha pel: 50 ppm ceil (skin)
acgih tlv: 50 ppm ceil (skin)