NationalStockNumber.INFO
Worldwide distributor of NSN parts and consumables located in the USA.
Worldwide distributor of NSN parts and consumables located in the USA.
A substance compounded for binding materials together by surface attachment. It is not used primarily to fill voids or pores or for sealing purposes. Excludes canada balsam; cement, watch jewel; film cement, photographic; gasket cement; and gasket shellac compound.
| Solicitation | Return by Date | Buyer Code | Quantity |
|---|---|---|---|
| SPE8ES19T4335 | 2019-04-08 | PEPCE | 887 KT |
| SPE8ES19T4122 | 2019-04-01 | PEPCE | 867 KT |
| SPE8ES19T2899 | 2019-02-05 | PEPCE | 521 KT |
| SPE8ES18T9263 | 2018-08-28 | PEPCE | 627 KT |
| SPE8ES18T8174 | 2018-07-24 | PEPCE | 379 KT |
| SPE8ES18T7571 | 2018-07-03 | PEPCE | 139 KT |
| SPE8ES18T2889 | 2018-02-06 | PEPCE | 800 KT |
| SPE8ES18Q0173 | 2017-12-15 | PEPCE | 90 KT |
| SPE8ES18T0538 | 2017-10-30 | PEPCE | 464 KT |
| SPE8ES17T5204 | 2017-07-17 | PEPCE | 337 KT |
The last inventory check on this NSN was done on 04/13/2022. Due to rapid changes in inventory this may not be the current stock qty.
Send us a request for quote using the form below. Our team will contact you with an up to date pricing and availability quote ASAP.
Y - Indicates information is in the hazardous materials information resource system (hmirs).
PMICA - Item does not contain precious metal.
CRITL- The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
004620 - Adhesives: cements, glues, pastes noi
705 - Cement, liquid
9 - Other or no special handling required (sh)
A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
B - Construction materials: includes paint and related materials, prefabricated building, wood products, metal and composition mater
W - Rating variable
Z - No special type of cargo code applicable
Questions & Answers: |
|
| What are the historical prices recorded for this stock number? | |
| Historical data shows pricing from $722.68 to $1,204.47.. | |
| Does NSN 8040-00-145-0432 have a shelf life? | |
| No. There is no shelf life applicable for this NSN. | |
| What NATO entities are users of this NSN? | |
| Department Of The Army, Department Of The Air Force, U.s. Marine Corps, Department Of The Navy, Federal Aviation Administration, U.s. Coast Guard, National Aeronautics and Space Administration, National Aeronautics and Space Administration, General Services Administration, Poland, Brazil, Spain, Singapore, Malaysia, Australia, Belgium, Canada, New Zealand, France, Germany, Republic Of Korea, United Kingdom, Italy, Denmark, Norway, Greece, Turkey, and Nato Maintenance and Supply Agency | |
| What is the NIIN of NSN 8040-00-145-0432? | |
| 001450432 or 00-145-0432 | |
| Does NSN 8040-00-145-0432 require demilitarization? | |
| Yes - ITAR Controlled | |
| What is the most recent solicitation for NSN 8040-00-145-0432? | |
| Solicitation SPE8ES19T4335 for qty 887 on 04/02/2019 | |
| When was this national stock number assigned to the federal catalog? | |
| Sep 17, 1969 | |
Effects of overexposure: eye: extr irrt may cause perm eye damage.
skn: irrt&sens.Inhal: irrt.Inges: irrt gi tract.
First aid: eye: flush copiously water 10 min. Skn: thorough wash soap &
water. Inh: remove to fresh air. Inges: drink two glasses of milk or
water.Call physician
Hcc: n1
spec gravity: 1.26
viscosity: 52000cp
solubility in water: insoluble
appearance and odor: gray paste
percent volatiles by volume: 0
Document 1031749. 3m generic p/n is 62-2217-xxxx-x. Kit also known
as 2216b/a or 3m ec2216b/a (gray).Key1: l1.
Stability indicator/materials to avoid: yes
hazardous decomposition products: co, co2, n, smoke particls on exposure
excess heat or flame
Waste disposal methods: observe all applicable regs before disposal.
cured resin (a&b): dispose in sand landfill.Spill: dispose of
cleanup matl by incineration.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: aliphatic amine
fraction by wt: 61.0%
ingred name: aluminum silicate pigment(clay)
fraction by wt: 39.0%
ingred name: carbon black
cas: 1333-86-4
rtecs #: ff5800000
fraction by wt: 1.00%
osha pel: 3.5 mg/m3
acgih tlv: 3.5 mg/m3; 9192
ingred name: volatile organic compound: 568 g/l per mfr's msds
rtecs #: 9999999vo
Effects of overexposure: skn: may irrt w/prolonged contact.May
sensitize.Inhl: may irrt.Inges: possible gi tract irrt.
First aid: eye: flush w/water 10 min &call phys.Skn;thoro wash
soap&water.Inhl: remove to fresh air.Inges: considered non toxic
Hcc: n1
spec gravity: 1.33
viscosity: 100000 cp
solubility in water: insol
appearance and odor: white cream paste - very slight odor
percent volatiles by volume: 0
Document 1031673. 3m generic p/n is 62-2216-xxxx-x. Kit also known
as 2216b/a or 3m ec2216b/a (gray).Key1: n1.
Stability indicator/materials to avoid: yes
stability condition to avoid: none
hazardous decomposition products: co2,co,n, & smoke particulates when
exp excess heat, flame.
Waste disposal methods: check all appl regs. Cured resin may be disposed
in sand landfill. Spill: dispose of cleanup matl by incineration.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: bisphenol a-epichlorohydrin resin
fraction by wt: 72.0%
ingred name: aluminum silicate pigment (clay)
fraction by wt: 28.0%
ingred name: volatile organic compound: n/d
rtecs #: 9999999vo
Health hazards acute and chronic: extremely irritating to eyes upon
direct contact. May cause permanent eye damage. May cause skin
irritation upon prolonged contact. May cause sensitization in some
individuals. Vapors may be irritatin g to respiratory system. May
cause gastrointestinal irritation.
effects of overexposure: eyes: irritating. Skin: irritating.May cause
sensitization.
First aid: eyes: flush with plenty of water for at least 10 minutes.
contact a physician. Skin: wash thoroughly with soap and water.
inhalation: provide fresh air. Swallowed: drink two glasses of water
or milk and c all a physician.
Hcc: n1
spec gravity: 1.26
viscosity: 52,000 cps
solubility in water: not soluble
appearance and odor: gray paste, no odor
Stability indicator/materials to avoid: yes
hazardous decomposition products: co, co2, n and smoke particles when
subjected to excessive heat or flame.
Waste disposal methods: since regulations vary, consult applicable
regulations or authorities before disposal. Two part
system: combined parts (b & a) when fully cured, may be disposed in
a sanitary landfill per regulations.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: amide
fraction by wt: 61%
other rec limits: none specified
ingred name: aluminum silicate pigment
cas: 1302-76-7
rtecs #: bd1450000
fraction by wt: 39%
other rec limits: none specified
ingred name: carbon black
cas: 1333-86-4
rtecs #: ff5250000
fraction by wt: 1%
other rec limits: none specified
acgih tlv: 3.5 mg/m3
Health hazards acute and chronic: extremely irritating to eyes upon
direct contact. May cause permanent eye damage. May cause skin
irritation upon prolonged contact. May cause sensitization in some
individuals. Vapors may be irritatin g to respiratory system. May
cause gastrointestinal irritation.
effects of overexposure: eyes: irritating. Skin: irritating.May cause
sensitization.
First aid: eyes: flush with plenty of water for at least 10 minutes.
contact a physician. Skin: wash thoroughly with soap and water.
inhalation: provide fresh air. Swallowed: drink two glasses of water
or milk and c all a physician.
Hcc: n1
spec gravity: 1.33
viscosity: **
solubility in water: not soluble
appearance and odor: off-white cream paste, very slight odor
Stability indicator/materials to avoid: yes
hazardous decomposition products: co, co2 n and smoke particles when
subjected to excessive heat or flame.
Waste disposal methods: since regulations vary, consult applicable
regulations or authorities before disposal. Two part
system: combined parts (b & a) when fully cured, may be disposed in
a sanitary landfill per regulations.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: 4,4'-isopropylidenediphenol (sara iii)
cas: 80-05-7
rtecs #: sl6300000
fraction by wt: 72%
other rec limits: none specified
ingred name: aluminum silicate pigment
cas: 1302-76-7
rtecs #: bd1450000
fraction by wt: 28%
other rec limits: none specified
Routes of entry: inhalation: yes skin: yes ingestion: yes
health hazards acute and chronic: eye: extremely irritating to eyes upon
direct contact. Dust from grinding, sanding or cutting operations
on the cured material may cause eye irritation. Skin: may cause
skin irritation upon prolonged contact. May cause allergic skin
reaction in certain individuals. Inhalation: vapors may be
irritating to respiratory
effects of overexposure: n/k system. If swallowed: may cause digestive
system irritation.
First aid: eye: flush eyes with large amounts of water for at least 10
minutes. Call a physician. Skin: thoroughly wash affected areas
with soap and water. Inhalation: remove person to uncontaminated
air. Call a physician. If swallowed: do not inducevomiting.
immediately call a physician or poison control center.
Hcc: n1
spec gravity: 1.260 (water=1)
viscosity: 52.0 cps
solubility in water: nil
appearance and odor: paste, gray, pungent odor.
percent volatiles by volume: 0.00
Stability indicator/materials to avoid: yes
hazardous decomposition products: co, co2, n and smoke particles when
subjected to excessive heat or flame.
Waste disposal methods: mix part a w/part b. Completely cure & dispose
of fully cured waste product in sanitary landfill. Incinerate
uncured bulk product after mixing w/flammable material in
industrial/commercial facility. D isposal should be in accordance
w/applic regs.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: amine terminated polymer - nj - registry no 04499600-5569p
fraction by wt: 55-70%
other rec limits: none specified
ingred name: kaolin
cas: 1332-58-7
rtecs #: gf1670500
fraction by wt: 30-45%
other rec limits: none specified
osha pel: 15 mg/m3 tdust
acgih tlv: 2 mg/m3 tdust; 9293
ingred name: carbon black
cas: 1333-86-4
rtecs #: ff5800000
fraction by wt: .01-0.1%
other rec limits: none specified
osha pel: 3.5 mg/m3
acgih tlv: 3.5 mg/m3
Routes of entry: inhalation: yes skin: yes ingestion: yes
health hazards acute and chronic: eye contact: irritating to eyes upon
direct contact. Dust from grinding, sanding or cutting operations
on the cured material may cause eye irritation. Skin contact: may
cause skin irritation upon prol onged contact. May cause an
allergic skin reaction in certain individuals. Inhalation: vapors
may be irritating to
effects of overexposure: n/k respiratory system. Dust from grinding,
sanding or cutting operations on the cured product may cause
respiratory system irritation.
First aid: eye: flush eyes with large amounts of water for at least 10
minutes. Call a physician. Skin contact: thoroughly wash affected
area with soap and water. Inhalation: remove person to
uncontaminated air. call a physician. If swallowed: do notinduce
vomiting. Immediately call a physician or poison control center.
Hcc: n1
spec gravity: 1.330 (water=1)
viscosity: ca 100.0 cps
solubility in water: nil
appearance and odor: creamy paste, off-white, very slight epoxy odor.
percent volatiles by volume: 0.00
Stability indicator/materials to avoid: yes
hazardous decomposition products: co, co2 and smoke particles when
subjected to excessive heat or flame.
Waste disposal methods: mix part a w/part b. Cure & dispose of fully
cured waste product in sanitary landfill. Incinerate uncured
product after mixing w/flammable mat'l in industrial or commercial
facility. Disposal should b e in accordance w/applicable
regulations.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: epoxy resin
cas: 25068-38-6
rtecs #: kc2100000
fraction by wt: 70-80%
other rec limits: none specified
ingred name: kaolin
cas: 1332-58-7
rtecs #: gf1670500
fraction by wt: 20-30%
other rec limits: none specified
osha pel: 15 mg/m3 tdust
acgih tlv: 2 mg/m3 tdust; 9293
Routes of entry: inhalation: no skin: no ingestion: no
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: eye contact: chemical related eye
burns(chemical corrosivity): cloudy appearance of cornea,chemiccal
burns,pain,tearing,ulcers,impaired vision/loss of vision.Vapors
from heated material may cause eye ir ritation.Dust created by
cutting,grinding,sanding,/machining may cause eye irritation.Skin
contact: allergic skin
reaction: redness,swelling,blistering,&itching.Mild skin irritation
redness,swelling&itc hing.*
effects of overexposure: *inh: irrtation(upper resp.Soreness of
nose&throat,coughing&sneezing.Vapors of heated material: resp.System
irrtation.Dust f/cutting,grinding,sanding,/machininng: irritation of
resp.System.Ingestion: irrt ation of gi
tissues: pain,vomiting,abdominal tenderness,nausea,blood in
vomitus&feces.Exposure in normal storage&handling has not been
reported-cause significant adverse health effects.Under normal pro
cessing conditions,e.G.Grinding/heating,may release fumes&vapors of
process releases may produce irritation/any health effects listed
above when emissions are present@elevated concentrations.Use w/app
ropriate local exhaust ventilation.
First aid: eye contact: immediately flush eyes with large amounts of
water for at least 15 minutes. get immediate medical attention.
skin contact: immediately wash skin with soap and large amounts of
water. remove contaminated clothing. if signs/symptoms occur,
call a physician. wash contaminated clothing before reuse and
dispose of contaminated shoes. inhalation: if signs/symptoms
occur, remove pe rson to fresh air. if signs/symptoms continue,
call a physician. ingestion: if swallowed do not induce
vomiting. drink two glasses of water, call a physician.
Spec gravity: 1.26 (water= 1)
viscosity: 40000-80000 cps
appearance and odor: gray paste/ pungent odor
Information believed correct as of date issued.3m makes no
warranties.Expressed/i mplied.Including,but not
limited-implied warranty of merchantability/itness for
purpose/course of performance/usage of trade.User
responsible for determining if fit for purpose&suitable for
method of application.**
Waste disposal methods: cure product according to product instructions.
incinerate uncured waste in an industrial or commercial
incinerator. dispose of completely cured (or polymerized) material
in a sanitary landfill.
Ingred name: amine terminated polymer- n.J. Trade secret (t.S.) registry
no. 04499600-5569p
rtecs #: at1005687
minumum % wt: 55.
maxumum % wt: 70.
ingred name: caobin
cas: 1332-58-7
rtecs #: gf1670500
minumum % wt: 30.
maxumum % wt: 45.
osha pel: 10 mg/m3
acgih tlv: 2 mg/m3
ingred name: carbon black
cas: 1333-86-4
rtecs #: ff5800000
minumum % wt: .01
maxumum % wt: .1
osha pel: 3.5 mg/m3
acgih tlv: 3.5 mg/m3
Health hazards acute and chronic: eye contact results in chemical
related burns (chemical corrosivity). Vapors from heated materail
may cause eye irritation. Dust created by cutting, grinding,
sanding, or machining may cause eye irrit ation. allergic and mild
skin reactions. Inhalation can cause irritaion. Vapors from heated
material may cause respiratory system irritation. Dust from
grinding, sanding, or machining may cause irita tion of the
respiratory system. ingestion may cause irritation of
gastrointestinal tissues.
effects of overexposure: eye contact: can include cloudy appearance of
the cornea, chemical burns, pain, tearing, ulcers, impaired vision
or loss of vision. Skin contact: can include redness, swelling,
itching and blisterin g. inhalation: can include soreness of the
nose and throat, coughing and sneezing. ingestion: can include
pain, vomiting, abdominal tenderness, nausea, blood in vomitus, and
blood in feces.
First aid: eye: immediately flush eyes w/large amounts of water.Get
immediate medical attention.Skin: immediately wash w/soap&large
amounts of water.Remove contaminated clothing before reuse&dispose
of contaminate shoes.Inhalation: if signs/symptoms occur,remove
person-fresh ai.If signs/symtpoms continue,call
physician.Ingestion: don't induce vomiting.Drink2glasses water.Call
physician.*
Spec gravity: 0.970 (water =1)
viscosity: ca. 7000.0 centipoise
appearance and odor: amber paste/ pungent odor
Stability indicator/materials to avoid: yes
stability condition to avoid: heat is generated during cure. Do not
cure a mass larger than 50 grams in a confined space to prevent a
premature reaction (exotherm) with production of intense heat and
smoke.
hazardous decomposition products: co, co2, oxides of nitrogen, amine
compounds, toxic vapors, gases or particulates.
Waste disposal methods: cure product according to product instructions.
incinerate uncured waste in an industrial or commercial
incinerator. Dispose of completely cured (or polymerized) material
in a sanitary landfill.
Ingred name: amine terminated polyether/carboxylic acid reaction product
n.J. Trade secret no. 04499800-5570
rtecs #: at1005687
= wt: 100.
Health hazards acute and chronic: eye contact results in chemical
related burns (chemical corrosivity). Vapors from heated materail
may cause eye irritation. Dust created by cutting, grinding,
sanding, or machining may cause eye irrit ation. allergic and mild
skin reactions. Inhalation can cause irritaion. Vapors from heated
material may cause respiratory system irritation. Dust from
grinding, sanding, or machining may cause irita tion of the
respiratory system. ingestion may cause irritation of
gastrointestinal tissues.
effects of overexposure: eye contact: can include cloudy appearance of
the cornea, chemical burns, pain, tearing, ulcers, impaired vision
or loss of vision. Skin contact: can include redness, swelling,
itching and blisterin g. inhalation: can include soreness of the
nose and throat, coughing and sneezing. ingestion: can include
pain, vomiting, abdominal tenderness, nausea, blood in vomitus, and
blood in feces.
First aid: eye: immediately flush eyes w/large amounts of water.Get
immediate medical attention.Skin: immediately wash w/soap&large
amounts of water.Remove contaminated clothing before reuse&dispose
of contaminate shoes.Inhalation: if signs/symptoms occur,remove
person-fresh ai.If signs/symtpoms continue,call
physician.Ingestion: don't induce vomiting.Drink2glasses water.Call
physician.*
Spec gravity: 1.170 (water=1)
viscosity: ca. 14000.0 centipoise
solubility in water: nil
appearance and odor: transparent liquid/epoxy odor
Information believed correct as of date issued.3m makes no
warranties.Expressed/i mplied.Including,but not
limited-implied warranty of merchantability/itness for
purpose/course of performance/usage of trade.User
responsible for determining if fit for purpose&suitable for
method of application.**
Waste disposal methods: cure product according to product instructions.
incinerate uncured waste in an industrial or commercial
incinerator. Dispose of completely cured (or polymerized) material
in a sanitary landfill.
Ingred name: epoxy resin
cas: 25068-38-6
code: f
rtecs #: ce6880000
= wt: 100.