Worldwide distributor of NSN parts and consumables located in the USA.
A substance compounded for binding materials together by surface attachment. It is not used primarily to fill voids or pores or for sealing purposes. Excludes canada balsam; cement, watch jewel; film cement, photographic; gasket cement; and gasket shellac compound.
Solicitation | Return by Date | Buyer Code | Quantity |
---|---|---|---|
SPE8ES19Q0386 | 2019-07-12 | DDC00 | 1 CA |
SPE8ES18Q0434 | 2018-05-29 | DDC00 | 2 CA |
SPE8ES17Q0695 | 2017-08-28 | PEPCE | 8 CA |
SPE8ES17Q0685 | 2017-08-29 | PEPCE | 1 CA |
SPE8ES17Q0684 | 2017-08-21 | PEPCE | 6 CA |
SPE8ES17Q0650 | 2017-08-16 | PHPHB | 2 CA |
SPE8ES17Q0483 | 2017-07-07 | PEPCE | 2 CA |
SPE8ES17T2651 | 2017-03-08 | PEPCE | 2 CA |
SPE8ES17T2549 | 2017-03-06 | PEPCE | 8 CA |
SPE7M017T5930 | 2017-03-06 | PMCMS | 1 CA |
The last inventory check on this NSN was done on 03/05/2021. Due to rapid changes in inventory this may not be the current stock qty.
Send us a request for quote using the form below. Our team will contact you with an up to date pricing and availability quote ASAP.
Y - Indicates information is in the hazardous materials information resource system (hmirs).
PMICA - Item does not contain precious metal.
CRITL- The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
004620 - Adhesives: cements, glues, pastes noi
705 - Cement, liquid
9 - Other or no special handling required (sh)
A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
B - Construction materials: includes paint and related materials, prefabricated building, wood products, metal and composition mater
R - Flammable liquids, un class 3 (flammable liquids label)
W - Rating variable
Questions & Answers: |
|
What are the historical prices recorded for this stock number? | |
Historical data shows pricing from $118.22 to $197.03.. | |
Does NSN 8040-00-152-0017 have a shelf life? | |
No. There is no shelf life applicable for this NSN. | |
What NATO entities are users of this NSN? | |
Department Of The Army, Department Of The Air Force, Department Of The Navy, General Services Administration, Bulgaria, Brazil, Spain, Germany, Republic Of Korea, United Kingdom, Turkey, and Nato Maintenance and Supply Agency | |
What is the NIIN of NSN 8040-00-152-0017? | |
001520017 or 00-152-0017 | |
Does NSN 8040-00-152-0017 require demilitarization? | |
Yes - ITAR Controlled | |
What is the most recent solicitation for NSN 8040-00-152-0017? | |
Solicitation SPE8ES19Q0386 for qty 1 on 07/11/2019 | |
When was this national stock number assigned to the federal catalog? | |
Feb 10, 1971 |
Effects of overexposure: may cause eye irritation skin sensitization or
other allergic responses.
First aid: wash skin immediately with soap and water. Flush eyes
immediately with plenty of water.
Hcc: n1
boiling pt: b.P. Text: decomposes
spec gravity: 1.55
solubility in water: negligible
appearance and odor: viscous grey paste with slight odor
Stability indicator/materials to avoid: no
stability condition to avoid: see storage recommendations
hazardous decomposition products: compounds of carbon and nitrogen
conditions to avoid polymerization: avoid heating large masses too high
in temp.
Waste disposal methods: land burial
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: epoxy resins
fraction by wt: 58.0%
ingred name: asbestos (amianthus, obsolete amosite), (for osha pel, see
29cfr 1910.1101)
cas: 1332-21-4
rtecs #: ci6475000
fraction by wt: 14.0%
osha pel: 0.2 fibers/cc
acgih tlv: 0.5 fibers/cc; a1;89
epa rpt qty: 1 lb
dot rpt qty: 1 lb
ingred name: fillers,unspecified
fraction by wt: 28.0%
Effects of overexposure: eye, skin & gastrodintestinal irritation.
possible skin sensitization in some indivduals.
First aid: eye: flush 10 min w/copious water. Skn: wash w/soap & water.
launder contam clothing before reuse. Inges, inhl: no action
indicated.
Hcc: n1
spec gravity: 1.2
solubility in water: nil
appearance and odor: viscous cream colored liquid w/ low odor.
percent volatiles by volume: 0
Stability indicator/materials to avoid: yes
hazardous decomposition products: co, co*2, smoke when subjected to
excessive heat or flame.
Waste disposal methods: manufacturer recommend commercial incineration
with destruction & removal efficiency at 100%. Otherwise, dispose
in landfill or municipal refuse incinerator. Disposal methods must
be iaw federal, stat e & local regulations.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: epichlorohydrin/bisphenol a epoxy resin (ansi class ii)
fraction by wt: 73%
ingred name: amorphous fused silica (when combined with curative- 27% of
product)
rtecs #: vv7320000
acgih tlv: 20 mppcf
ingred name: curative
Effects of overexposure: skin-sensitizer,minor irritant.Eye-minor
transient irritant
First aid: skin-wash with soap and water.Remove contaminated clothing
and wash it before reuse.Eyes-flush with water for 15 min. And
consult physician
Hcc: n1
appearance and odor: tan,sharp
percent volatiles by volume: 0.2
Stability indicator/materials to avoid: yes
hazardous decomposition products: on
burning-co,co*2,aldehydes,phenolics,cresols possible
Waste disposal methods: burn in adequate incinerator or bury in landfill
per local laws.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: no ingredient for this formulation_ingredient
Routes of entry: inhalation: yes skin: yes ingestion: yes
health hazards acute and chronic: may cause eye and skin irritation and
possible allergic reactions. Prolonged and repeated contact may
cause sensitization which will result in allergic reactions. Avoid
contact with eyes or skin.
effects of overexposure: skin rash, irritation.
First aid: flush skin and eye contact with plenty of water. Wash
thoroughly with soap and water, rubbing alcohol or hand cleaner. Do
not use solvents. Remove soiled clothing and wash before reuse. If
irritation persists, see physician.
Hcc: b2
boiling pt: b.P. Text: decomposes
vapor pres:
vapor density: nil
spec gravity:
evaporation rate & reference: nil
solubility in water: nil
appearance and odor: viscous gray paste with slight odor.
Stability indicator/materials to avoid: yes
strong oxidizing agents, strong lewis or mineral acids.
hazardous decomposition products: co, nox, aldehydes, acids and
undetermined organics.
conditions to avoid polymerization: mixing resin/curing agent in batches
greater than 1 lb. Do not heat mixed adhesive unless curing
surfaces to be bonded.
Waste disposal methods: dispose of as hazardous waste according to
federal, state and local regulations.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: epoxy resin system
ingred name: silica
cas: 112945-52-5
rtecs #: vv7310000
fraction by wt:
osha pel: 20 mppcf
acgih tlv: 0.1 mg/m3
ingred name: aluminum (sara iii)
cas: 7429-90-5
rtecs #: bd0330000
fraction by wt:
osha pel: 15mg/m3 dust/5 fume
acgih tlv: 10mg/m3 dust; 9192
ingred name: 4-glycidyloxy-n,n-diglycidylaniline
cas: 5026-74-4
fraction by wt:
ingred name: voc
rtecs #: 9999999vo
Routes of entry: inhalation: yes skin: yes ingestion: yes
health hazards acute and chronic: material is corrosive to skin. May
cause chemical burn to eyes and skin. Repeat contact may cause
sensitization. Vapors irritating and may cause chest discomfort and
bronchitis symptoms.Prolonged or r epeated exposure may cause
allergic reactions.
effects of overexposure: possible burns to eyes and skin; irritation and
possible sensitization to skin. Vapors may be irritating to upper
respiratory tract.
First aid: flush skin and eye contact with plenty of water. Wash
thoroughly with soap and water, rubbing alcohol or hand cleaner. Do
not use solvents. Remove soiled clothing and wash before reuse. If
irritation persists, see physician.
Hcc: b2
boiling pt: b.P. Text: 405f,207c
vapor pres: 0.37mm
vapor density: 3.48
spec gravity: 0.951
evaporation rate & reference: nil
solubility in water: 100%
appearance and odor: amber liquid with ammoniacal odor
Stability indicator/materials to avoid: yes
strong oxidizing agents, strong lewis or mineral acids.
hazardous decomposition products: co, nox, aldehydes, acids and
undetermined organics.
conditions to avoid polymerization: mixing resin/curing agent in batches
greater than 1 lb. Do not heat mixed adhesive unless curing
surfaces to be bonded.
Waste disposal methods: dispose of as hazardous waste according to
federal, state and local regulations.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: epoxy resin system
ingred name: diethylene triamine
cas: 111-40-0
rtecs #: ie1225000
fraction by wt: < 15%
osha pel: 1 ppm
acgih tlv: s, 1 ppm; 9192
ingred name: triethylenetetramine
cas: 112-24-3
rtecs #: ye6650000
fraction by wt: < 10%
ingred name: voc
rtecs #: 9999999vo
Ld50 lc50 mixture: limits for individual ingred on file
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: immediate effects: brief contact may
irritate the skin or cause a rash. Long term effects: repeated or
prolonged skin contact may result in allergic sensitization.
explanation of carcinogenicity: neither this material nor any of its
components is considered a carcinogen.
effects of overexposure: skin rash, irritation.
medical cond aggravated by exposure: skin sensitization
First aid: eye: flush eyes with water for 15 minutes. If irritation
persists, get medical attention. Skin: wash thoroughly with soap
and water. If irritation persists, get medical attention.
inhalation: remove v ictim to fresh air. If symptoms persist, get
medical attention. Ingestion: drink plenty of water. Get medical
attention immediatley.
Hcc: v7
vapor pres: nil
vapor density: >1
spec gravity: 1.59
viscosity: 5000-9000 p
solubility in water: negligible
appearance and odor: viscous gray paste with slight odor
Stability indicator/materials to avoid: yes
strong oxidizing agents, strong lewis or mineral acids.
stability condition to avoid: dont mix part a & b in batches >1 lb
unless used immediately. Dont heat mixed adhesive >125f unless
curing surfaces.
hazardous decomposition products: co, nox, aldehydes, acids and
undetermined organics.
conditions to avoid polymerization: failure to obey cautions: heat build
up (exotherm). Exotherm has potential for release of toxic gases.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: epoxy polymer
fraction by wt: 40-70%
other rec limits: none specified
ingred name: 4-glycidyloxy-n,n-diglycidylaniline
cas: 5026-74-4
fraction by wt: 15-40%
other rec limits: none specified
ingred name: aluminum powder (sara iii)
cas: 7429-90-5
rtecs #: bd0330000
fraction by wt: 10-30%
other rec limits: none specified
osha pel: 15 mg/m3
acgih tlv: 10 mg/m3
ingred name: silica
cas: 112926-00-8
fraction by wt: 1-5%
other rec limits: none specified
osha pel: 6 mg/m3 twa
acgih tlv: 10 mg/m3 twa
ingred name: volatile organic content,
rtecs #: 9999999vo
other rec limits: none specified
Ld50 lc50 mixture: data on indiviual component on file
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: immediate effects: corrosive to eyes &
skin. Brief contact may cause chemical burns. Vapors & mists will
irritate nose & throat. Long term effects: repeatd/prolongd skin
contact may result in burns & allergic sensitizatn.
explanation of carcinogenicity: neither this material nor any of its
componenets is considered a carcinogen.
effects of overexposure: skin or eye irritation, chest discomfort
medical cond aggravated by exposure: skin sensitization
First aid: eye: flush eyes with lots of running water for 15 minutes.
get medical attention immediately. Skin: wash skin thoroughly with
soap and water. If irritation persists, get medical attention.
inhalation: remove victim to fresh air. If symptoms persist, get
medical attention. Ingestion: drink plenty of water. Get medical
attention immediately.
Hcc: b2
boiling pt: b.P. Text: 405f,207c
vapor pres: nil
vapor density: >1
spec gravity: 0.96 (water=1)
viscosity: 10-30 p
solubility in water: 100%
appearance and odor: amber liquid with ammoniacal odor
Stability indicator/materials to avoid: yes
strong oxidizing agents, strong lewis or mineral acids.
stability condition to avoid: dont mix part a & b in batches >1 lb
unless immed used. Dont heat mixed adhesive > 125f unless curing
bonding surfaces.
hazardous decomposition products: co, nox, aldehydes, acids and
undetermined organics.
conditions to avoid polymerization: failure to observe these precautions
may result in excessive heat bld-up causing exotherms (may release
toxic gasses).
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: polyamide resin
fraction by wt: 40-70%
other rec limits: none specified
ingred name: diethylenetriamine
cas: 111-40-0
rtecs #: ie1225000
fraction by wt: 10-30%
other rec limits: none specified
osha pel: 1 ppm
acgih tlv: 1 ppm (skin)
ingred name: triethylenetetramine
cas: 112-24-3
rtecs #: ye6650000
fraction by wt: 5-10%
other rec limits: none specified
ingred name: volatile organic content,
rtecs #: 9999999vo
other rec limits: none specified
Routes of entry: inhalation: yes skin: yes ingestion: no
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: immediate contact may irritate the
skin or cause a rash. Respeated or prolonged skin contact may
result in allergic sensitization.
explanation of carcinogenicity: neither this material nor any of its
components is considered a carcinogen.
effects of overexposure: skin rash, irritation.
medical cond aggravated by exposure: skin sensitization.
First aid: eyes-flush eyes with water for 15 minutes. If irritation
persists, get medical attention. Skin-wash skin thoroughly with
soap & water. If irritation persists, get medical attention.
inhalation-remove victim to fresh air. If symptoms persists, get
medical attention. Ingestion-drink plenty of water. Get medical
attention immediately.
Hcc: b3
decomp temp: decomp text: not tested
vapor pres: nil
vapor density: >1
spec gravity: 1.59
viscosity: 5000-9000 p
solubility in water: negligible
appearance and odor: viscous gray paste with slight odor.
Stability indicator/materials to avoid: yes
strong oxidizing agents, strong lewis or mineral acids.
stability condition to avoid: do not heat mixed resin above 125 deg. F
unless curing surfaces to be bonded.
hazardous decomposition products: carbon monoxide, oxides of nitrogen,
aldehydes, acids and undetermined organics.
conditions to avoid polymerization: avoid mixing resin and curing agents
in batches greater than 1 pound unless you plan to use immediately.
Waste disposal methods: this material, as a waste, is not considered a
rcra hazardous waste. However, incineration in an epa-approved
waste incinerator is a preferred disposal practice.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: polyamide resin
fraction by wt: 40-70%
other rec limits: none recommended
ingred name: 4-glycidyloxy-n,n-diglycidylaniline
cas: 5026-74-4
fraction by wt: 15-40%
other rec limits: none recommended
ingred name: triethylene tetramine
cas: 112-24-3
rtecs #: ye6650000
fraction by wt: 5-10%
other rec limits: none recommended
ingred name: silica, amorphous, precipitated and gel
cas: 112926-00-8
rtecs #: vv8850000
fraction by wt: 1-5%
other rec limits: none recommended
osha pel: 20 mppcf; z-3
acgih tlv: 10 mg/m3 tdust; 9394
Routes of entry: inhalation: unknown skin: yes ingestion: yes
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: eyes: eye contact with liquid product
may cause irritation. Skin: epoxy resin is potential skin
sensitizer. Inhalation: inhalation is not anticipated as a route of
exposure. Ingestion: harmful if swal lowed. No anticipated chronic
effects.
medical cond aggravated by exposure: potential skin sensitizer.
First aid: inhalation: remove to fresh air. Eye: flush with copious
amounts of water. If irritation persists, seek medical attention.
skin: wash affected area with soap and water. Launder contaminated
clothing b efore reuse. Ingestion: give one glass of water or milk.
do not induce vomiting. Get immediate medical attention.
Hcc: b3
spec gravity: 1.4 (water=1)
appearance and odor: liquid, tan, neutral
Stability indicator/materials to avoid: yes
Waste disposal methods: to the best of our knowledge, this product does
no meet the definition of hazardous waste. Regulations 40 cfr261.
solidify and dispose of in an approved landfill. Consult state,
local, or provincial a uthorities for more restrictive
requirements.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: kaolin (respirable dust 5 mg/m3 osha; 2 mg/m3 acgih)
cas: 1332-58-7
rtecs #: gf1670500
other rec limits: none recommended
osha pel: 10 mg/m3
acgih tlv: 10 mg/m3
ingred name: epoxy resin
fraction by wt: 50-70%
other rec limits: none recommended
ingred name: voc: 0 g
rtecs #: 9999999vo
other rec limits: none recommended
Routes of entry: inhalation: yes skin: yes ingestion: yes
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: eyes: severe irritant. Skin: severe
irritation and severe skin sensitizer. Inhalation: may cause
irritation. Ingestion: harmful if swallowed.
effects of overexposure: severe eye and skin irritant, vapors harmful,
skin sensitizer.
medical cond aggravated by exposure: none known
First aid: inhalation: remove from exposure. Restore breathing if
necessary. Call physician. Eye: flush with copious amounts of
water. Get medical attention. Skin: flush skin with soap and water.
get medical att ention. Ingestion: give a glass of water or milk.
get medical attention.
Hcc: b2
spec gravity: 1.11 (water=1)
appearance and odor: liquid, tan, ammonia odor
Stability indicator/materials to avoid: yes
hazardous decomposition products: nitrogen compounds
Waste disposal methods: to best of semco's knowledge,prodct doesn't meet
definitn of hazardous waste (us epa hazardous waste regs 40 cfr
261).Disposal via incineration at apprvd facility
recommended.Consult state,local,provi ncial authorities for more
restrictive req'mnts.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: polyamide resin
fraction by wt: 10-30%
other rec limits: none recommended
ingred name: triethylenetetramine
cas: 112-24-3
rtecs #: ye6650000
fraction by wt: 1-5%
other rec limits: none recommended
ingred name: 1-aminoethyl piperazine
cas: 140-31-8
rtecs #: tk8050000
fraction by wt: 10-30%
other rec limits: none recommended
ingred name: 3-diethylamino propylamine
cas: 104-78-9
rtecs #: tx7350000
fraction by wt: 10-30%
other rec limits: none recommended
ingred name: silica-amorphous
cas: 112945-52-5
rtecs #: vv7310000
other rec limits: none recommended
osha pel: 6 mg/m3
acgih tlv: 10 mg/m3
ingred name: kaolin (respirable dust: 5 mg/m3 osha; 2 mg/m3 acgih)
cas: 1332-58-7
rtecs #: gf1670500
other rec limits: none recommended
osha pel: 10 mg/m3
acgih tlv: 10 mg/m3
ingred name: voc: 0 g
rtecs #: 9999999vo
other rec limits: none recommended