Worldwide distributor of NSN parts and consumables located in the USA.
A substance compounded for binding materials together by surface attachment. It is not used primarily to fill voids or pores or for sealing purposes. Excludes canada balsam; cement, watch jewel; film cement, photographic; gasket cement; and gasket shellac compound.
Solicitation | Return by Date | Buyer Code | Quantity |
---|---|---|---|
SPE8ES15T3785 | 2015-10-05 | PEPCE | 2 KT |
SPE8ES15T3784 | 2015-10-05 | PEPCE | 1 KT |
The last inventory check on this NSN was done on 05/11/2022. Due to rapid changes in inventory this may not be the current stock qty.
Send us a request for quote using the form below. Our team will contact you with an up to date pricing and availability quote ASAP.
Y - Indicates information is in the hazardous materials information resource system (hmirs).
PMICA - Item does not contain precious metal.
CRITL- The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
004620 - Adhesives: cements, glues, pastes noi
705 - Cement, liquid
9 - Other or no special handling required (sh)
A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
B - Construction materials: includes paint and related materials, prefabricated building, wood products, metal and composition mater
R - Flammable liquids, un class 3 (flammable liquids label)
W - Rating variable
Questions & Answers: |
|
What are the historical prices recorded for this stock number? | |
Historical data shows pricing from $888.33 to $1,480.55.. | |
Does NSN 8040-00-180-6200 have a shelf life? | |
No. There is no shelf life applicable for this NSN. | |
What NATO entities are users of this NSN? | |
Department Of The Army, Department Of The Air Force, Department Of The Navy, General Services Administration, Australia, Denmark, and Turkey | |
What is the NIIN of NSN 8040-00-180-6200? | |
001806200 or 00-180-6200 | |
Does NSN 8040-00-180-6200 require demilitarization? | |
Yes - ITAR Controlled | |
What is the most recent solicitation for NSN 8040-00-180-6200? | |
Solicitation SPE8ES15T3785 for qty 2 on 09/29/2015 | |
When was this national stock number assigned to the federal catalog? | |
Dec 03, 1969 |
Effects of overexposure: primary irrit of skin-onprolng or repeated
contact.Minor transient irrit to eye contct-no cornea inj
First aid: remove fr skin w/water or waterless skin cleaner.Remov contam
clothng & wash before reuse.Eyes: flsh eyes,if any ill effcts
devel,get med attn.Inhal: remov person to fresh air,get med
attn.Ingest: not li kely prob.No known antidote,treat syst.Induc
vomit
Spec gravity: 1.17
appearance and odor: amber liquid,mild aromatic odor
percent volatiles by volume: 1.0
Stability indicator/materials to avoid: yes
strong oxidizing agents
stability condition to avoid: excess heating over long periods of time
degrades resin
hazardous decomposition products: carbon monoxide,aldehydes acids, etc.
conditions to avoid polymerization: exotherms when cured.
Waste disposal methods: keep in covered drums,pending disposal. Handle &
dispose in full compliance with all applicable
international,federal,state, & local regulations.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: no ingredient for this formulation_ingredient
Ld50 lc50 mixture: ld50 > 8g/kg (rat).
routes of entry: inhalation: yes skin: no ingestion: yes
health hazards acute and chronic: eye & skin irritation.
effects of overexposure: irritation.
First aid: inh: remove to fresh air,if breathing is difficult,get medical
attn; eye: flush with large volume of water; skin: wipe off
excess,rinse with 5% acetic acid & wash thoroughly with soap &
water; ing: see ph ysician immediately,contact nearest regional
poison control center.
Hcc: n1
boiling pt: b.P. Text: decomposes
spec gravity: 0.93-1.03
solubility in water: nil
appearance and odor: tan viscous liquid
percent volatiles by volume: nil
Stability indicator/materials to avoid: yes
none
stability condition to avoid: none
hazardous decomposition products: co,co*2,nitrogen oxides.
Waste disposal methods: keep in covered drums,pending disposal. Handle &
dispose in full compliance with all applicable
international,federal,state, & local regulations.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: polyamide resin
fraction by wt: 100%
Effects of overexposure: cause burns on eyes,skin,mouth,stomach.
First aid: eyes & skin: flush/wash with water. Inhale: remove to fresh
air. Ingest: give large amount of water.
Hcc: b2
boiling pt: b.P. Text: 390-405f
vapor pres:
vapor density: 3.56
spec gravity: 0.95
solubility in water: complete
appearance and odor: colorless to straw yellow liq-amine odor
percent volatiles by volume: 100
Stability indicator/materials to avoid: yes
acids,oxidizing matl,chlorinated organics.
hazardous decomposition products: nitrogen oxides
Waste disposal methods: landfill according to local regulations. Keep
out of public water supplies.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: diethylene triamine
cas: 111-40-0
rtecs #: ie1225000
fraction by wt: 100%
osha pel: 1 ppm
acgih tlv: s, 1 ppm; 9192
Routes of entry: inhalation: yes skin: yes ingestion: yes
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: eye: severe irrit.Injury(burns)to comea
& other tissues.Severity depends on duration of expo/prompt
1staid.Skin: corro cause burns & severe tissue damage.Can cause
development of hypersensitivity(allerg ic rx)in susceptible
individuals.Inhal: nose/throat/upper resp tract irrit.Development of
hypersensitivity in (supplemen)
effects of overexposure: eye irrit,burns. Skin burns, tissue damage.
hypersensitivity (allergic reactions) development.
nose/throat/upper resp tract irrit. Wheezing, couging, shortness of
breath, feeling of tightiness in ches t. Ingest: burns to
mouth/throat/gi tract, nausea, vomiting, gi upset.
medical cond aggravated by exposure: some of the omponents may aggravate
existing med conditons involving lilver,kidney,resp sys,immune sys
&/or specific chem allergies.Certain individuals may be more
susceptible.
First aid: eye: flush w/steady water stream 15mins.Get immed med
attn.Skin: immed wash w/soap/lots of water @least 15mins.Cleanse
skin/hair/under fingernails well.Use emerg shower.Remove contmain
cloth/shoe.Get me d attn.Inhal: move to fresh air.Diff breath give
oxy.Stop breath give art resp.Get med attn w/o delay.Ingest: do not
induce vomit.Get immed med attn/poi cntrl cntr.Rinse mouth
w/water.Give 2cups (suppl)
Hcc: b2
boiling pt: b.P. Text: 398f,203c
vapor pres: 1
vapor density: 3.56
spec gravity: 0.95
solubility in water: complete
appearance and odor: amber viscous liquid, amine odor.
percent volatiles by volume: 1.0
Stability indicator/materials to avoid: yes
oxidizing agents, acids, water, chemically acitve metals: nickel,
cobalt, iron, copper.
stability condition to avoid: avoid contact with imcompatible chemicals.
hazardous decomposition products: may liberate irrit vap during
combust/decomp.Amines,oxides of nitrogen,smoke,soot,carbon
dioxide,carbon monoxide.
Waste disposal methods: disposal must be made in accordance with
applicable governmental regulations.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: diethylene triamine (2,2'-diaminodiethyleneamine)
cas: 111-40-0
rtecs #: ie1225000
fraction by wt: 100%
other rec limits: none recommended
osha pel: 1 ppm
acgih tlv: s, 1 ppm; 9394
ld50 lc50 mixture: acute oral ld50: >8 g/kg (estimate)
route of entry inds - inhalation: yes
skin: yes
ingestion: yes
carcinogenicity inds - ntp: no
iarc: no
osha: no
effects of exposure: eye contact: may cause irritation. skin contact: may
cause irritation. inhalation: may cause irritation. Ingestion: may cause
irritation, ulceration, and burns.
explanation of carcinogenicity: this product does not contain, in a
concentration greater than or equal to 0.1%, any carcinogenic material
according to the national toxicology program, iarc monographs, or osha.
first aid: eyes: flush eyes thoroughly with water for at least 15 minutes while
holding eyelids open. Seek medical attention. Skin: remove contaminated
clothing. Wipe off excess product, and immediately flush th e affected area
with water for at least 15 minutes. Obtain medical attention. Inhalation:
remove to fresh air, and provide oxygen if breathing is difficult. Seek
medical attention if symptoms persists . Ingestion: do not induce vomiting.
give a large quantity of water or milk unless the victim is drowsy,
convulsing, or unconscious. Seek medical attention.
b.P. Text: not determined
vapor pres: not determined
vapor density: not determ
evaporation rate & reference: not determined
solubility in water: slight
appearance and odor: clear liquid. Odor: none specified by manufacturer (fp n).
product id: activator w
cage: to881
assigned ind: y
company name: armstrong products division, resin technology group, llc
street: 28 norfolk ave.,
city: s. Easton ma
zipcode: 00000-9999
health emergency phone: 800-424-9300
label required ind: y
date of label review: 11/08/2000
status code: a
origination code: f
eye protection ind: yes
skin protection ind: yes
signal word: warning
respiratory protection ind: yes
health hazard: moderate
contact hazard: slight
fire hazard: slight
=======================================================
responsible party cage: to881
trans id no: 155377
product id: activator w
msds prepared date: 03/17/1997
review date: 11/17/2000
mfn: 1
multiple kit number: 0
unit of issue: kt
container qty: b
type of container: kit
Hazard and precautions: acute: eye contact: may cause irritation. skin
contact: may cause irritation. inhalation: may cause irritation. ingestion:
may cause irritation, ulceration, and burns. Chronic: none specified by m
anufacturer (fp n).
spill release procedures: ventilate the area, and evacuate if airborne levels
exceed established limits. Add dry material to absorb the spill, such as
clay, sand, or another suitable material. For large spills, dike to contain .
dispose of properly. Flush the area with dilute acetic and collect rinse for
disposal.
waste disposal methods: place in an appropriate disposal facility, in
compliance with applicable government regulations.
handling and storage precautions: store in a cool, dry place, in closed
containers. Keep away from flames. Avoid contact with reactive materials.
wear protective eyewear, chemical-resistant gloves, and other protective
clothing as ap propriate.
Ld50 lc50 mixture: none
routes of entry: inhalation: yes skin: yes ingestion: yes
health hazards acute and chronic: eye contact: contact can cause
moderate irritation. Skin contact: contact can cause moderate
irritation. It can cause the development of hypersensitlvity
(allergic reactions) in susceptible individual s. Inhalation: under
normal conditions, no adverse effects are expected. Ingestion:
this product has a low order of oral toxicity. It is not expected
to produce any adverse effects following acute e xposure.
explanation of carcinogenicity: none
effects of overexposure: depending on the route, frequency, and duration
of exposure, the following organs and/or system may be adversely
effected: the eyes, skin, and the immune system (allergic
reactions). Some of the compo nents in this product may also
aggravate existing medical conditions involving the skin, the
respiratory system, the immune system or specific chemical
allergies. Consequently, certain individuals m ay be more
susceptible to the possible effects of overexposure and should take
appropriate precautions when handling this product.
medical cond aggravated by exposure: none
First aid: eyes: in case of eye contact, flush with a steady stream of
water for 15 minutes. Obtain prompt medical attention. Skin: in
case of skin contact, wash with soap and plenty of water.
ingestion: if swal lowed, call a poison control center, emergency
room, or physician.
Boiling pt: =260.C, 500.F
melt/freeze pt: m.P/f.P text: none
decomp temp: decomp text: none
vapor density: air=1
spec gravity: 1.17
solubility in water: insoluble
appearance and odor: light yellow viscious liquid mild epoxy odor.
Stability indicator/materials to avoid: yes
amines, mercaptans, oxidizing agents, acids, strong bases, ammonia.
stability condition to avoid: avoid contact with the above incompatible
chemicals.
hazardous decomposition products: phenolics, smoke, soot, carbon
dioxide, carbon monoxide, and metallic oxides.
conditions to avoid polymerization: will not occur.
Waste disposal methods: disposal must be made in accordance with
applicable governmental regulations.
Ingred name: bisphenol a-epichlorohydrin resin
cas: 25068-38-6
rtecs #: ce6880000
minumum % wt: 90.
maxumum % wt: 100.
ld50 lc50 mixture: none
route of entry inds - inhalation: yes
skin: yes
effects of exposure: eye contact: contact causes severe irritation. Can cause
injury. Skin contact: this is a corrosive, contact can cause burns and severe
tissue damage. inhalation: can acuse irritation to the nose, thr oat, and
upper respiratory tract. Can be irritating to mucous membranes, especially
following prolonged exposure to mists or vapors. Inhalation can cause
dizziness, headaches, incoordination, wheezing , tightness of chest.
ingestion: this is a corrosive, swallowing causes severe burns to the mouth,
throat, and digestive tract. Swallowing can cause nausea, vomiting, and
gastrointestinal upset.
explanation of carcinogenicity: none
signs and symptions of overexposure: depending on the route, frequency, and
duration of exposure the following organs and/or systems may be adversely
effected: the eyes, skin, respiratory system, the reproductive system , and
the immune system (allergic reactions). Some of the components in this
product may also aggravate existing medical conditions involving the skin,
the respiratory system, the reproductive system, and the immune s ystem
and/or specific chemical allergies. Consequently, certain individuals may be
more susceptible to the possible effects of overexposure and should take
appropriate precautions when handling this p roduct.
medical cond aggravated by exposure: none
b.P. Text: none
m.P/f.P text: none
decomp text: none
vapor pres: <0.01
vapor density: air=1 >1
spec gravity: 0.97
solubility in water: slightly in water
appearance and odor: amber viscous liquid amine odor.
product id: activator w
cage: to881
assigned ind: y
company name: armstrong products division, resin technology group, llc
street: 28 norfolk ave.,
city: s. Easton ma
zipcode: 00000-9999
health emergency phone: 800-424-9300
label required ind: y
date of label review: 09/12/2001
status code: a
origination code: g
hazard and precautions: eye contact: contact causes severe irritation. Can
cause injury. Skin contact: this is a corrosive, contact can cause burns and
severe tissue damage. inhalation: can acuse irritation to the nose, thr oat,
and upper respiratory tract. Can be irritating to mucous membranes,
especially following prolonged exposure to mists or vapors. Inhalation can
cause dizziness, headaches, incoordination, wheezing , tightness of chest.
ingestion: this is a corrosive, swallowing causes severe burns to the mouth,
throat, and digestive tract. Swallowing can cause nausea, vomiting, and
gastrointestinal upset.
=======================================================
stability indicator: yes
stability condition to avoid: avoid contact with the above incompatible
chemicals.
materials to avoid: oxidizing agents.
hazardous decomposition products: amines, oxides of nitrogen, smoke, soot,
carbon dioxide, carbon monoxide.
hazardous polymerization indicator: no
conditions to avoid polymerization: will not occur.
waste disposal methods: disposal must be made in accordance with applicable
governmental regulations.
handling and storage precautions: store in a cool, dry, well ventilated area.
do not store above 100 deg f. Avoid contact with eyes., skin, and clothing.
heating can generate vapors, use appropriate ventilation or approved
respirators as necessary.
other precautions: none