NationalStockNumber.INFO
Worldwide distributor of NSN parts and consumables located in the USA.
Worldwide distributor of NSN parts and consumables located in the USA.
A substance compounded for binding materials together by surface attachment. It is not used primarily to fill voids or pores or for sealing purposes. Excludes canada balsam; cement, watch jewel; film cement, photographic; gasket cement; and gasket shellac compound.
Send us a request for quote using the form below. Our team will contact you with an up to date pricing and availability quote ASAP.
Y - Indicates information is in the hazardous materials information resource system (hmirs).
PMICA - Item does not contain precious metal.
CRITL- The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
004620 - Adhesives: cements, glues, pastes noi
705 - Cement, liquid
9 - Other or no special handling required (sh)
A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
B - Construction materials: includes paint and related materials, prefabricated building, wood products, metal and composition mater
W - Rating variable
W - Corrosive materials, un class 8 (corrosive label)
Questions & Answers: |
|
| What are the historical prices recorded for this stock number? | |
| Historical data shows pricing from $505.93 to $843.21.. | |
| Does NSN 8040-00-200-4390 have a shelf life? | |
| No. There is no shelf life applicable for this NSN. | |
| What NATO entities are users of this NSN? | |
| Brazil, Republic Of Korea, Italy, Greece, and Turkey | |
| What is the NIIN of NSN 8040-00-200-4390? | |
| 002004390 or 00-200-4390 | |
| Does NSN 8040-00-200-4390 require demilitarization? | |
| Yes - ITAR Controlled | |
| What is the most recent solicitation for NSN 8040-00-200-4390? | |
| No solicitations for this NSN. | |
| When was this national stock number assigned to the federal catalog? | |
| Jan 01, 1963 | |
Effects of overexposure: eye: minor irrit. Skin: poss sensitizer & minor
irrit inhal: poss problem when heated to high temp.
First aid: eyes: flush with water 15 minutes. If ill effects develop,get
md. Skin: wash w/soap & water. Remove contaminated clothing & wash
then before reuse. Inhal: remove to fresh air & get md. Ingest;no
known an tidote. Treat symptoms. W/lg amts induce vomt
Hcc: f4
boiling pt: b.P. Text: 389f>198c
spec gravity: 0.96
solubility in water: negligible
appearance and odor: gray paste
Stability indicator/materials to avoid: yes
conditions to avoid polymerization: excess of hardener.
Waste disposal methods: soak up in absorbant material or scrape up.
residual can be removed with non-flammable solvent such as
methylene chloride. If solvent is used adeq ventil is required.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: epoxy resin
fraction by wt: 40%
ingred name: vinyl resin
fraction by wt: 17%
ingred name: filler
fraction by wt: 23%
Effects of overexposure: eye: extremely irritating. Skin: irritation.
First aid: eye: flush withwater 15 minutes,consult physician
immediately. Skin: wash with soap and water,remove contaminated
clothing. Inhalation: remove to fresh air. Ingestion: see physicain
immediately.
Hcc: n1
spec gravity: 1.00
solubility in water: negligible
appearance and odor: white to cream liquid
Stability indicator/materials to avoid: yes
hazardous decomposition products: co*2,carbon monoxide
Waste disposal methods: comply with local,state and federal regulations.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: asbestos (amianthus, obsolete amosite), (for osha pel, see
29cfr 1910.1101)
cas: 1332-21-4
rtecs #: ci6475000
fraction by wt: 2%
osha pel: 0.2 fibers/cc
acgih tlv: 0.5 fibers/cc; a1;89
epa rpt qty: 1 lb
dot rpt qty: 1 lb
ingred name: epoxy curing agent
Reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: some people may develop allergic
reaction.
explanation of carcinogenicity: none known.
effects of overexposure: minor transient irritation of eyes and skin.
medical cond aggravated by exposure: skin rashes.
First aid: flush eye with water for 15 minutes holding eye lids open.
see a physician. Wash skin with soap and water. See a physician if
rash develops. Remove to fresh air. Give artificial respiration if
not bre athing. Consult a physician.
Hcc: v7
boiling pt: b.P. Text: >400f,>204c
decomp temp: decomp text: >400f,>204c
spec gravity: 1.624 (water=1)
viscosity: >100,000 cps
solubility in water: nil
appearance and odor: thick amber liquid, epoxy odor.
percent volatiles by volume: 0.0
Stability indicator/materials to avoid: yes
acids, amines in uncontrolled conditions
hazardous decomposition products: carbon dioxide, carbon monoxide,
phenol and other toxic fumes.
Waste disposal methods: this material if discarded may be hazardous.
discard in accordance with federal, state & local regulations.
incineration is the preferred method.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: bisphenol a epichlorohydrin
cas: 25085-99-8
fraction by wt: 50%
other rec limits: none specified
ingred name: calcium carbonate
cas: 1317-65-3
rtecs #: ev9580000
fraction by wt: 50%
other rec limits: none specified
osha pel: 10 mg/m3
acgih tlv: 10 mg/m3
ingred name: amorphous silica
cas: 112945-52-5
rtecs #: vv7318000
fraction by wt:
other rec limits: none specified
osha pel: 10 mg/m3
acgih tlv: 10 mg/m3
ingred name: voc: none
rtecs #: 9999999vo
other rec limits: none specified
Health hazards acute and chronic: some people may develop allergic
reaction. May also cause cancer.
explanation of carcinogenicity: 4,4 methylenedianiline
effects of overexposure: minor transient irritation of eyes and skin.
medical cond aggravated by exposure: skin rashes
First aid: flush eye with water for 15 minutes holding eye lids open.
see a physician. Wash skin with soap and water. See a physician if
rash develops. Remove to fresh air. Give artificial respiration if
not bre athing. Consult a physician.
Hcc: v7
boiling pt: b.P. Text:
decomp temp: decomp text: >400f,>204c
spec gravity: 1.078 (water=1)
viscosity: >200,000 cps
solubility in water: nil
appearance and odor: very thick amber paste, amine odor.
percent volatiles by volume: 0.0
Stability indicator/materials to avoid: yes
epoxy type materials in uncontrolled conditions.
hazardous decomposition products: carbon dioxide, carbon monoxide,
ammonia and other toxic fumes.
Waste disposal methods: this material if discarded may be hazardous.
discard in accordance with local, state and federal regulations.
incineration is preferred method.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: 4,4'-methylenedianiline (sara iii)
cas: 101-77-9
rtecs #: by5425000
fraction by wt: 15%
other rec limits: none specified
osha pel: 0.1 ppm
acgih tlv: 0.1 ppm
epa rpt qty: 1 lb
dot rpt qty: 1 lb
ingred name: polyamine
fraction by wt: 70%
other rec limits: none specified
ingred name: amorphous silica
cas: 112945-52-5
rtecs #: vv7318000
fraction by wt: 15%
other rec limits: none specified
osha pel: 10 mg/m3
acgih tlv: 10 mg/m3
ingred name: voc: none
rtecs #: 9999999vo
other rec limits: none specified
Routes of entry: inhalation: no skin: yes ingestion: yes
reports of carcinogenicity: ntp: yes iarc: yes osha: yes
health hazards acute and chronic: eyes: can cause irritation, redness,
tearing, blurred vision. Skin: contact can cause moderate
irritation. Prolonged or repeated contact can cause sensitization.
inhalation: not likely due to the low volatility of the material.
effects of overexposure: redness, smarting, tearing of the eye. Dryness
& cracking of the skin.
medical cond aggravated by exposure: none stated by the manufacturer.
First aid: inhalation: move person to fresh air. Treat symptomatically.
get medical help. Eyes: flush immediately with large amounts of
water for at least 15 minutes. Get medical treatment. Skin: wash
affected s kin areas with soap and water. If polymer persists on
skin, wash w/isopropyl alcohol. If irrit persists, get med aid.
ingestion: don't induce vomiting. Keep person warm/quiet, get med
aid.
Vapor density: na
spec gravity: 1.1
appearance and odor: heavy grey paste.
percent volatiles by volume: 0.0
Stability indicator/materials to avoid: yes
amines, anhydrides, epoxy curing agents.
stability condition to avoid: premature mixing with curing agents
hazardous decomposition products: carbon dioxide, carbon monoxide and
various hydrocarbons.
Waste disposal methods: disposal should be done in accordance with
federal, state and local regulations.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: asbestos (friable) (sara iii)
cas: 1332-21-4
rtecs #: ci6425000
fraction by wt: 20%
other rec limits: none recommended
osha pel: see 1910.1001
acgih tlv: 0.2 - 2 fibers/cc
epa rpt qty: 1 lb
dot rpt qty: 1 lb
ingred name: allyl glycidyl ether (age)(vp = 1.7 mmhg)
cas: 106-92-3
rtecs #: rr0875000
fraction by wt:
other rec limits: none recommended
osha pel: (c) 10 ppm
acgih tlv: s,5 ppm/10 stel;9293
Ld50 lc50 mixture: ld50 oral rat=1410mg/kg;derml rabbit=750
routes of entry: inhalation: yes skin: yes ingestion: yes
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: skin/eye contact results in strong
irritation & burns. Permanent eye damage may result. Ingestion may
result ;in severe gastric disturbances, including nausea &
vomiting. Inhalation of vapors/mists ma y result in respiratory
irritation.
First aid: eyes: immed wash w/running water 15 min. Get immediate med
aid. Skin: wash w/water while removing contam clothes. Get immed
med aid. Launder contam clothes before reuse. Ingestion: don't
induce vomiti ng. Dilute q/water or milk & call dr. Immediately.
never give fluids or induce vomiting if victem unconscious/having
convulsions. Inhal: get fresh air. Aid in breathing if necessary,
get immed med aid
Boiling pt: b.P. Text: 155 to 173c
vapor pres: 25 @ 70c
vapor density: 4.4 air=1
spec gravity: 0.5264
solubility in water: miscible
appearance and odor: colorless liquid, ammoniacal odor
Stability indicator/materials to avoid: yes
acid chlorides, anhydrides & isocyanates.
stability condition to avoid: corrosive to metal
hazardous decomposition products: co, co2 & nox.
Waste disposal methods: incinerate in an rcra licensed facility. Do not
discharge into waterways or sewers w/o proper authority. Haz waste
40 cfr 261. Waste #d-001, d-002.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: 3-diethylaminopropylamine (sara 313)
cas: 104-78-9
rtecs #: tx7350000
fraction by wt: >99%
other rec limits: none recommended
Routes of entry: inhalation: no skin: yes ingestion: yes
reports of carcinogenicity: ntp: yes iarc: yes osha: yes
health hazards acute and chronic: eyes: can cause irritation, redness,
tearing, blurred vision. Skin: contact can cause moderate
irritation. Prolonged or repeated contact can cause sensitization.
inhalation: not likely due to the low volatility of the material.
effects of overexposure: redness, smarting, tearing of the eye. Dryness
& cracking of the skin.
medical cond aggravated by exposure: none stated by the manufacturer.
First aid: inhalation: move person to fresh air. Treat symptomatically.
get medical help. Eyes: flush immediately with large amounts of
water for at least 15 minutes. Get medical treatment. Skin: wash
affected s kin areas with soap and water. If polymer persists on
skin, wash w/isopropyl alcohol. If irrit persists, get med aid.
ingestion: don't induce vomiting. Keep person warm/quiet, get med
aid.
Hcc: f7
vapor density: na
spec gravity: 1.1
appearance and odor: heavy grey paste.
percent volatiles by volume: 0.0
Stability indicator/materials to avoid: yes
amines, anhydrides, epoxy curing agents.
stability condition to avoid: premature mixing with curing agents
hazardous decomposition products: carbon dioxide, carbon monoxide and
various hydrocarbons.
Waste disposal methods: disposal should be done in accordance with
federal, state and local regulations.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: asbestos (friable) (sara iii)
cas: 1332-21-4
rtecs #: ci6425000
fraction by wt: 20%
other rec limits: none recommended
osha pel: see 1910.1001
acgih tlv: 0.2 - 2 fibers/cc
epa rpt qty: 1 lb
dot rpt qty: 1 lb
ingred name: allyl glycidyl ether (age)(vp = 1.7 mmhg)
cas: 106-92-3
rtecs #: rr0875000
fraction by wt:
other rec limits: none recommended
osha pel: (c) 10 ppm
acgih tlv: s,5 ppm/10 stel;9293
Ld50 lc50 mixture: ld50 oral rat=1410mg/kg;derml rabbit=750
routes of entry: inhalation: yes skin: yes ingestion: yes
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: skin/eye contact results in strong
irritation & burns. Permanent eye damage may result. Ingestion may
result ;in severe gastric disturbances, including nausea &
vomiting. Inhalation of vapors/mists ma y result in respiratory
irritation.
First aid: eyes: immed wash w/running water 15 min. Get immediate med
aid. Skin: wash w/water while removing contam clothes. Get immed
med aid. Launder contam clothes before reuse. Ingestion: don't
induce vomiti ng. Dilute q/water or milk & call dr. Immediately.
never give fluids or induce vomiting if victem unconscious/having
convulsions. Inhal: get fresh air. Aid in breathing if necessary,
get immed med aid
Hcc: f7
boiling pt: b.P. Text: 155 to 173c
vapor pres: 25 @ 70c
vapor density: 4.4 air=1
spec gravity: 0.5264
solubility in water: miscible
appearance and odor: colorless liquid, ammoniacal odor
Stability indicator/materials to avoid: yes
acid chlorides, anhydrides & isocyanates.
stability condition to avoid: corrosive to metal
hazardous decomposition products: co, co2 & nox.
Waste disposal methods: incinerate in an rcra licensed facility. Do not
discharge into waterways or sewers w/o proper authority. Haz waste
40 cfr 261. Waste #d-001, d-002.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: 3-diethylaminopropylamine (sara 313)
cas: 104-78-9
rtecs #: tx7350000
fraction by wt: >99%
other rec limits: none recommended
Health hazards acute and chronic: eyes: can cause irritation, redness,
tearing, blurred vision. Skin: contact can cause moderate
irritation. Prolonged or repeated contact can cause sensitization.
inhalation: not likely due to low vola tility of the material.
medical cond aggravated by exposure:
First aid: if on skin: throughly wash exposed area with soap and water.
if polymer persists on skin, wash with isopropyl alcohol. If
irritation persists, seek medical attention. If in eyes: flush with
large amoun ts of water, lifting upper and lower lids occassionally
get medical attention. If swallowed: do not induce vomiting, keep
person warm, quiet and get medical attention.
Spec gravity: 1.020
voc grams/liter: 8.5
appearance and odor: heavy gray paste
percent volatiles by volume: 0
Stability indicator/materials to avoid: yes
amines,anhydrides, epoxy curring agents.
stability condition to avoid: premature mixing eith ecuring agents.
hazardous decomposition products: carbon dioxide, carbon monoxide and
various hydrocarbons.
Waste disposal methods: dispose of in a landfill in accordance with
local, state and federal regulations.
Ingred name: allyl glycidyl ether
cas: 106-92-3
rtecs #: rr0875000
< wt: 5.