NationalStockNumber.INFO
Worldwide distributor of NSN parts and consumables located in the USA.
Worldwide distributor of NSN parts and consumables located in the USA.
A substance compounded for binding materials together by surface attachment. It is not used primarily to fill voids or pores or for sealing purposes. Excludes canada balsam; cement, watch jewel; film cement, photographic; gasket cement; and gasket shellac compound.
Send us a request for quote using the form below. Our team will contact you with an up to date pricing and availability quote ASAP.
Y - Indicates information is in the hazardous materials information resource system (hmirs).
PMICA - Item does not contain precious metal.
CRITL- The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
004620 - Adhesives: cements, glues, pastes noi
705 - Cement, liquid
9 - Other or no special handling required (sh)
A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
B - Construction materials: includes paint and related materials, prefabricated building, wood products, metal and composition mater
R - Flammable liquids, un class 3 (flammable liquids label)
W - Rating variable
Questions & Answers: |
|
| What are the historical prices recorded for this stock number? | |
| No pre-dated pricing for this NSN could be found. | |
| Does NSN 8040-00-224-4662 have a shelf life? | |
| No. There is no shelf life applicable for this NSN. | |
| What NATO entities are users of this NSN? | |
| New Zealand | |
| What is the NIIN of NSN 8040-00-224-4662? | |
| 002244662 or 00-224-4662 | |
| Does NSN 8040-00-224-4662 require demilitarization? | |
| Yes - ITAR Controlled | |
| What is the most recent solicitation for NSN 8040-00-224-4662? | |
| No solicitations for this NSN. | |
| When was this national stock number assigned to the federal catalog? | |
| Mar 16, 1970 | |
Routes of entry: inhalation: yes skin: yes ingestion: no
reports of carcinogenicity: ntp: no iarc: no osha: no
effects of overexposure: skin rash, irritation. Immediate effects: brief
contact may irritate the skin or cause a rash. Long term effects:
repeated or prolonged skin contact may result in allergic
sensitization.
medical cond aggravated by exposure: skin sensitization
First aid: eye: flush eyes with water for 15 minutes. If irritation
persists, get medical attention. skin: wash skin thoroughly with
soap & water. If irritation persists, get medical attention.
inhalation: rem ove victim to fresh air. If symptoms persist, get
medical attention. Ingestion: drink plenty of water. Get medical
attention immediately.
Hcc: t4
vapor pres: nil
vapor density: > 1
spec gravity: > 1 g/l
viscosity: 3000-6500
solubility in water: negligible
appearance and odor: viscous gray paste with slight odor
Stability indicator/materials to avoid: yes
strong oxidizing agents, strong lewis or mineral acids.
stability condition to avoid: avoid mixing resin (part a) & curing agent
(part b) in batches > 1 lb unless you plan to use immed. Don't heat
mixed..
hazardous decomposition products: co, nox, aldehydes, acids and
undetermined organics.
conditions to avoid polymerization: ..Adhesive > 125 f unless curing
surfaces to be bonded. Failure to observe precautions result an
exotherm,potent gases
Waste disposal methods: this material, as a waste, is not considered a
rcra hazardous waste. However, incineration in an epa-approved
waste incinerator is a preferred disposal practice. Consult local,
state & federal regulat ions for proper disposal of this material.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: bishphenol-a-epichlorohydrin epoxy resin
cas: 25068-38-6
rtecs #: kc2100000
fraction by wt: 40-70%
other rec limits: none specified
ingred name: aluminum powder
cas: 7429-90-5
rtecs #: bd0330000
fraction by wt: 15-40%
other rec limits: none specified
osha pel: 5 mg/m3
acgih tlv: 5 mg/m3
ingred name: silicon dioxide
cas: 112945-52-5
rtecs #: vv7318000
fraction by wt: 5-10%
other rec limits: none specified
osha pel: 6 mg/m3
acgih tlv: 6 mg/3m
ingred name: voc: < 10 g/l (estimate) (test method)
rtecs #: 9999999vo
other rec limits: none specified
Routes of entry: inhalation: yes skin: yes ingestion: no
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: immediate effects: acute hazards of
this material may include poisoning. Possible burns to eye and
skin.
effects of overexposure: possible burns to eyes & skin; irritation to
upper respiratory tract. Skin will turn yellow/brown at site of
contact with mixture. Long term effects: breathing of vapors may
delayed or serious injury to the liver & spleen (toxic hepatitis).
medical cond aggravated by exposure: skin sensitization
First aid: eyes: flush eyes with lots of running water for 15 minutes.
get medical attention immediately. Skin: wash skin thoroughly with
soap & water. If irritation persists, get medical attention.
inhalation : remove victim to fresh air. If symptoms persist, get
medical attention. Ingestion: drink plenty of water. Get medical
attention immediately.
Hcc: t4
spec gravity: 1.15
viscosity: 3-6
solubility in water: partial
appearance and odor: reddish-black liquid
Stability indicator/materials to avoid: yes
strong oxidizing agents, strong lewis or mineral acids.
stability condition to avoid: avoid mixing resin (part a) & curing agent
(part b) in batches > 1 lb unless you plan to use immed. Don't heat
mixed..
hazardous decomposition products: co, nox, aldehydes, acids and
undetermined organics
conditions to avoid polymerization: ..Adhesive > 100f unless curing
surfaces bonded. Failure observe precaut result excessive heat
buildup cause exotherm.
Waste disposal methods: this material is considered a rcra hazardous
waste. However, incineration in an epa-approved waste incinerator
is a preferred disposal practice.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: m-phenylenediamine (ld50 650 mg/kg - ld50 5000 mg/kg)
cas: 108-45-2
rtecs #: ss7700000
fraction by wt: 40-70%
other rec limits: none specified
ingred name: 2,4 diamino-anisole
cas: 615-05-4
fraction by wt: 30-60%
other rec limits: none specified
ingred name: 4,4-methylene dianiline
cas: 101-77-9
rtecs #: by5425000
fraction by wt: 10-30%
other rec limits: none specified
osha pel: 1 ppm (skin)
acgih tlv: 1 ppm (skin)
epa rpt qty: 1 lb
dot rpt qty: 1 lb
ingred name: voc: < 10 g/l (estimate) (test method)
rtecs #: 9999999vo
other rec limits: none specified