NationalStockNumber.INFO
Worldwide distributor of NSN parts and consumables located in the USA.
Worldwide distributor of NSN parts and consumables located in the USA.
A substance compounded for binding materials together by surface attachment. It is not used primarily to fill voids or pores or for sealing purposes. Excludes canada balsam; cement, watch jewel; film cement, photographic; gasket cement; and gasket shellac compound.
Send us a request for quote using the form below. Our team will contact you with an up to date pricing and availability quote ASAP.
Y - Indicates information is in the hazardous materials information resource system (hmirs).
PMICA - Item does not contain precious metal.
CRITL- The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
004620 - Adhesives: cements, glues, pastes noi
705 - Cement, liquid
9 - Other or no special handling required (sh)
A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
B - Construction materials: includes paint and related materials, prefabricated building, wood products, metal and composition mater
R - Flammable liquids, un class 3 (flammable liquids label)
W - Rating variable
Questions & Answers: |
|
| What are the historical prices recorded for this stock number? | |
| No pre-dated pricing for this NSN could be found. | |
| Does NSN 8040-00-235-8356 have a shelf life? | |
| No. There is no shelf life applicable for this NSN. | |
| What NATO entities are users of this NSN? | |
| Spain, Singapore, Greece, and Turkey | |
| What is the NIIN of NSN 8040-00-235-8356? | |
| 002358356 or 00-235-8356 | |
| Does NSN 8040-00-235-8356 require demilitarization? | |
| Yes - ITAR Controlled | |
| What is the most recent solicitation for NSN 8040-00-235-8356? | |
| No solicitations for this NSN. | |
| When was this national stock number assigned to the federal catalog? | |
| Oct 24, 1969 | |
Ld50 lc50 mixture: none specified by manufacturer.
routes of entry: inhalation: yes skin: no ingestion: no
reports of carcinogenicity: ntp: yes iarc: yes osha: no
health hazards acute and chronic: eye: vapor, liquid or dust from cured
material may irritate eyes. skin: liquid contact may cause
irritation, dermatitis, drying, cracking and in some individuals
cause and allergic reaction. Inhaled: va pors from heated material
or dust from cured material may cause respiratory irritation.
ingested: g/i irritation.
explanation of carcinogenicity: di (2-ethyl hexyl) phthalate are listed
by iarc & ntp. Mfr states that normal use should not result in
exposure.
effects of overexposure: eye: vapor, liquid or dust from cured material
may irritate eyes. Skin: liquid contact may cause irritation,
dermatitis, drying, cracking and in some individuals cause and
allergic reaction. Inhaled: va pors from heated material or dust
from cured material may cause respiratory irritation. Ingested: g/i
irritation.
medical cond aggravated by exposure: supplier did not address this
field.
First aid: eye: flush eyes with large amounts of water for at least 15
minutes. Call a physician. Skin: wash affected area with soap and
water. Inhal: remove person to uncontaminated air. Call a physician.
ingest: d o not induce vomiting. Immediately calla physician or
poison control center.
Hcc: v7
nrc/state lic num: none
spec gravity: 1.500 water=1
viscosity: 948,772 cps
solubility in water: very slight
appearance and odor: gray, viscous paste, epoxy odor.
Stability indicator/materials to avoid: yes
strong oxidizing agents.
stability condition to avoid: none specified by manufacturer.
hazardous decomposition products: co, co2, & nitrogen decomposition
products, including possibility of hcn, when subjected to excess
heat or flame.
conditions to avoid polymerization: avoid heat cont=ditions which cause
premature reaction (xotherm) with production of intense heat and
smoke.
Waste disposal methods: incinerate bulk product after mixing with
flammable material in an industrial or commercial facility.
disposal should be in accordance with applicable regulations.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: aluminum pigments (sara iii)
cas: 7429-90-5
rtecs #: bd0330000
fraction by wt: 30-40%
osha pel: 15mg/m3 dust/5 fume
acgih tlv: 10mg/m3 dust; 9192
ingred name: epoxy resin
cas: 5026-74-4
fraction by wt: 30-40%
ingred name: ethylene, chloro-, polymer (polyvinyl chloride resin)
cas: 9002-86-2
rtecs #: kv0355000
fraction by wt: 10-20%
ingred name: di-sec-octyl phthalate (di-2-ethylhexyl-phthalate) (sara
iii)
cas: 117-81-7
rtecs #: ti0350000
fraction by wt: 1-10%
osha pel: 5 mg/m3/10 stel
acgih tlv: 5 mg/m3; 9192
epa rpt qty: 100 lbs
dot rpt qty: 100 lbs
ingred name: glycols, polypropylene, 2,3-epoxypropyl ether (epoxy resin)
cas: 9072-62-2
rtecs #: md0913000
fraction by wt: 1-10%
ingred name: amorphous silica (silica gel)
cas: 112945-52-5
rtecs #: vv7310000
fraction by wt: 1-10%
osha pel: 6 mg/m3 tdust
acgih tlv: 10 mg/m3 tdust
ingred name: guanidine, cyano- (dicyandiamide)
cas: 461-58-5
rtecs #: me9950000
fraction by wt: 1-10%
ingred name: urea, 3-(p-chlorophenyl) -1,1-dinethyl- (para-chlorophenol-
dimethylurea)
cas: 150-68-5
rtecs #: ys6300000
fraction by wt: 1-10%
ingred name: synthetic elastomer, n.J. No. 0449960-5708p
fraction by wt: 1-10%
other rec limits: none recommended