NationalStockNumber.INFO
Worldwide distributor of NSN parts and consumables located in the USA.
Worldwide distributor of NSN parts and consumables located in the USA.
A substance compounded for binding materials together by surface attachment. It is not used primarily to fill voids or pores or for sealing purposes. Excludes canada balsam; cement, watch jewel; film cement, photographic; gasket cement; and gasket shellac compound.
Send us a request for quote using the form below. Our team will contact you with an up to date pricing and availability quote ASAP.
Y - Indicates information is in the hazardous materials information resource system (hmirs).
PMICA - Item does not contain precious metal.
CRITL- The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
004620 - Adhesives: cements, glues, pastes noi
705 - Cement, liquid
9 - Other or no special handling required (sh)
A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
B - Construction materials: includes paint and related materials, prefabricated building, wood products, metal and composition mater
W - Rating variable
W - Rating variable
Z - No special type of cargo code applicable
Questions & Answers: |
|
| What are the historical prices recorded for this stock number? | |
| Historical data shows pricing from $524.15 to $873.59.. | |
| Does NSN 8040-00-430-8261 have a shelf life? | |
| No. There is no shelf life applicable for this NSN. | |
| What NATO entities are users of this NSN? | |
| Department Of The Navy, General Services Administration, Italy, and Nato Maintenance and Supply Agency | |
| What is the NIIN of NSN 8040-00-430-8261? | |
| 004308261 or 00-430-8261 | |
| Does NSN 8040-00-430-8261 require demilitarization? | |
| Yes - ITAR Controlled | |
| What is the most recent solicitation for NSN 8040-00-430-8261? | |
| No solicitations for this NSN. | |
| When was this national stock number assigned to the federal catalog? | |
| Feb 11, 1972 | |
Effects of overexposure: eye: severe irrt.Inh: irrt.Ingest: low
toxicity.Skn: irrt, sensitization possible for some. (see precau)
First aid: eye: flush 10 min w/copious water, call phys. Skin: wash
thoroughly soap & water. Inhl, ingest: remove to fresh air from
source of dust. Wash contaminated clothing before reuse.
Hcc: n1
spec gravity: 1.54
viscosity: 200/800000cps
solubility in water: not soluble
appearance and odor: gray paste
percent volatiles by volume: 0
Stability indicator/materials to avoid: yes
none
stability condition to avoid: none
hazardous decomposition products: co, co*2, nitrogen decomp products
incl hcn
Waste disposal methods: cured two-part resin disposable in sanitary
landfill. Incinerate uncured paste in approved incineration
facility iaw all applicable regulations.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: polyamide resin (-% incl w/curing agent)
other rec limits: none specified
acgih tlv: n/d
ingred name: curing agent
fraction by wt: 36.0%
acgih tlv: n/d
ingred name: calcium carbonate (marble) (limestone)
cas: 1317-65-3
rtecs #: ev9580000
osha pel: 15 mg/m3 tdust
acgih tlv: 10 mg/m3 tdust; 9192
ingred name: carbon black
cas: 1333-86-4
rtecs #: ff5800000
osha pel: 3.5 mg/m3
acgih tlv: 3.5 mg/m3; 9192
ingred name: clay and pigment
fraction by wt: 64.0%
Effects of overexposure: eye: severe irrt. Inh: irrt.Ingest: low
toxicity.Skn: irrt, sensitization possible for some.(see precau)
First aid: eye: flush 10 min w/copious water, call phys. Skn: wash
thoroughly soap & water. Inhl, ingest: remove to fresh air from
source of dust. Wash contaminated clothing before reuse
Hcc: n1
spec gravity: 1.56
viscosity: 250/400000cps
solubility in water: very slight
appearance and odor: white paste-little odor
percent volatiles by volume: 0
Stability indicator/materials to avoid: yes
none
stability condition to avoid: none
hazardous decomposition products: hcl, co, co*2, smoke particles
Waste disposal methods: cured two-part resin disposable in sanitary
landfill. Incinerate uncured paste in approved incineration
facility iaw all applicable regulations.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: epoxy resin (epichlorohydrin-bisphenol a)
fraction by wt: 42.0%
other rec limits: none specified
acgih tlv: n/d
ingred name: n-butyl glycidyl ether (bge)
cas: 2426-08-6
rtecs #: tx4200000
fraction by wt: 7.0%
osha pel: 50 ppm
acgih tlv: 25 ppm; 9293
ingred name: calcium carbonate (marble) (limestone)
cas: 1317-65-3
rtecs #: ev9580000
osha pel: 15 mg/m3 tdust
acgih tlv: 10 mg/m3 tdust; 9192
ingred name: titanium dioxide
cas: 13463-67-7
rtecs #: xr2275000
osha pel: 15 mg/m3 tdust
acgih tlv: 10 mg/m3 tdust; 9293
ingred name: clay
fraction by wt: 51.0%
Health hazards acute and chronic: eye contact: direct contact could
produce severe eye irritation. Skin contact: contact with skin may
produce moderate irritation. May cause sensitization in certain
susceptible individuals. Inhalation : no solvent vapor. Ingestion:
low toxicity via ingestion.
First aid: eye contact: flush eyes with plenty of water for at least 10
minutes and call a physician. Skin contact: wash with soap and
water. Inhalation: n/a. If swallowed: n/a.
Hcc: n1
spec gravity: 1.54
viscosity: 200,000 - *
solubility in water: not soluble
appearance and odor: fray paste
percent volatiles by volume: 0
Stability indicator/materials to avoid: yes
hazardous decomposition products: thermal decomposition or burning may
produce co, co2, and nitrogen decomposition products including hcn.
Waste disposal methods: dispose of the cured two-part mixture in a
sanitary landfill. Incinerate uncured waste in a permitted
hazardous waste facility capable of meeting applicable regulatory
requirements for destruction and removal.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: calcium carbonate
cas: 471-34-1
rtecs #: ff9335000
other rec limits: none specified
ingred name: pigment
other rec limits: none specified
ingred name: clay
cas: 1332-58-7
rtecs #: gf1670500
other rec limits: none specified
osha pel: 15 mg/m3 tdust
acgih tlv: 2 mg/m3 tdust; 9293
ingred name: carbon black
cas: 1333-86-4
rtecs #: ff5800000
other rec limits: none specified
ingred name: polyamide resin
other rec limits: none specified
ingred name: curing agent
other rec limits: none specified
Health hazards acute and chronic: eye: direct contact may be irritating.
skin: prolonged/repeated contact may be irritating. Epoxy resin is
skin sensitizer. Inhalation: may be irritating to nose & throat.
ingestion: oral toxicity negl igible. Butyl glycidyl ether is
mutagenic by in vitro tests. Mutagenicity studies in mice gave
mixed results.
First aid: eye contact: immediately flush eyes with plenty of water for
at least 10 minutes and call a physician. Skin contact: wash
thoroughly with soap and water.
Hcc: n1
spec gravity: 1.56
viscosity: 250 to *
solubility in water: very slight
appearance and odor: white paste, little odor
percent volatiles by volume: 0
Stability indicator/materials to avoid: yes
hazardous decomposition products: hcl, co, co2, and smoke particles when
subjected to excessive heat or flames.
Waste disposal methods: cured two-part mixture may be disposed in a
sanitary landfill. Incinerate uncured waste in a permitted
hazardous waste facility capable of meeting applicable regulatory
requiredments for destruction a nd removal.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: calcium carbonate
cas: 471-34-1
rtecs #: ff9335000
other rec limits: none specified
ingred name: titanium dioxide
cas: 13463-67-7
rtecs #: xr2275000
other rec limits: none specified
osha pel: 15 mg/m3 tdust
acgih tlv: 10 mg/m3 tdust; 9293
ingred name: clay
cas: 1332-58-7
rtecs #: gf1670500
other rec limits: none specified
osha pel: 15 mg/m3 tdust
acgih tlv: 2 mg/m3 tdust; 9293
ingred name: butyl glycidyl ether
cas: 2426-08-6
rtecs #: tx4200000
fraction by wt: 7.0%
other rec limits: none specified
osha pel: 50 ppm
acgih tlv: 25 ppm; 9293
ingred name: epoxy resin
fraction by wt: 42.0%
other rec limits: none specified