Adhesive

Hazards

Routes of entry: inhalation: no skin: no ingestion: no
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: eyes: may cause minor transient
irritation. Skin: may cause minor irritation, may be a sensitizer.

explanation of carcinogenicity: none
effects of overexposure: irritation.

First Aid

First aid: skin: wash w/soap & water. Eyes: flush w/water. Inhalation:
remove to fresh air. Obtain medical attention in all cases.

Chemical Properties

Hcc: n1
spec gravity: 1.21
solubility in water: nil
appearance and odor: light amber color.

Reactivity

Stability indicator/materials to avoid: yes
bases

Proper Disposal

Waste disposal methods: burn in adequate incinerator/bury in landfill
iaw/federal, state & local regulations.

disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.

Ingredients List

Ingred name: modified epoxy novolac resin

Hazards

Routes of entry: inhalation: no skin: no ingestion: no
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: skin: may be a sensitizer.

explanation of carcinogenicity: none

First Aid

First aid: skin: wash w/soap & water. Eyes: flush w/water for 15 mins.

inhalation: remove to fresh air. Obtain medical attention in all
cases.

Chemical Properties

Hcc: n1
boiling pt: b.P. Text: >400f
spec gravity: 0.936
solubility in water: slight
appearance and odor: green liquid.

percent volatiles by volume:

Reactivity

Stability indicator/materials to avoid: yes
hazardous decomposition products: ammonia, co2 & co.

Proper Disposal

Waste disposal methods: burn in adequate incinerator/bury by landfill
iaw/federal, state & local regulations.

disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.

Ingredients List

Ingred name: modified polyamide hardener

Hazards

Effects of overexposure: eye burn

First Aid

First aid: flush with water.

Chemical Properties

Hcc: b2
spec gravity: .096
appearance and odor: amber amonic odor.

Reactivity

Stability indicator/materials to avoid: yes
hazardous decomposition products: carbon,nitrogen compounds

Proper Disposal

Waste disposal methods: land fill
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.

Ingredients List

Ingred name: diethylene triamine
cas: 111-40-0
rtecs #: ie1225000
fraction by wt: 13%
osha pel: 1 ppm
acgih tlv: s, 1 ppm; 9192

ingred name: polyaminde
fraction by wt: 87%

Hazards

Routes of entry: inhalation: yes skin: yes ingestion: yes
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: corrosive to skin and eyes. Can cause
chemical burns to skin and severe chemicalburns to eyes. Vapors
irritating and may cause chest discomfort and bronchitis symptoms.

moderately toxic by ingestion.

First Aid

First aid: eyes: irri immed w/large amounts of water for a min of 15
minutes. Seek med attnto assess nature/extent of injury. Skin: wash
skin contact immed w/copious amts soap/water. If extensive contact
use eme rg shower to flush w/large amts runningwater/soap for 15
min. Remove all contam clothing. Inhalation: remove to uncon- tam
atmos/get med attn. Ingestion: immed drink large amts
water/milk/med attn.

Chemical Properties

Hcc: b2
boiling pt: b.P. Text: 405f
vapor pres: 0.37mm hg
vapor density: 3.48,air=1
spec gravity: 0.951, h2o=1
evaporation rate & reference: low
solubility in water: 100%
appearance and odor: amber liquid with ammoniacal odor.

percent volatiles by volume: low

Reactivity

Stability indicator/materials to avoid: yes
strong oxidizing agents, strong lewis or mineral acids.

hazardous decomposition products: co, nox, aldehydes, acids and
undetermined organics.

conditions to avoid polymerization: avoid mixing resin/curing agent in
batches > 1 lb total. Do not heat mixed adhesive >75f unless curing
surfaces bonded.

Proper Disposal

Waste disposal methods: dispose of as hazardous waste according to
d.O.T. Hazard class. If not regulated by d.O.T., dispose of as
orm-e. Disposal method can be land burial orchemical incineration
as regulated by all governmental agencies.

disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.

Ingredients List

Ingred name: diethylene triamine
cas: 111-40-0
rtecs #: ie1225000
fraction by wt:
osha pel: 1 ppm
acgih tlv: s, 1 ppm; 9192

Hazards

Routes of entry: inhalation: no skin: yes ingestion: no
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: may cause skin irritation and possible
allergic reactions. Prolonged and repeated contact may cause
sensitization which will result in allergic reactions.

First Aid

First aid: flush skin and eye contact with plenty of water. Wash skin
thoroughly with soap and water, rubbing alcohol or hand cleaner. Do
not use solvents. Remove soiled clothing and wash before reuse. If
irrit ation persists or increases, seephysician.

Chemical Properties

Hcc: b2
boiling pt: b.P. Text: decomposes
vapor pres:
vapor density: nil
spec gravity: >1, h2o = 1
evaporation rate & reference: nil
solubility in water: nil
appearance and odor: amber liquid with slight odor.

percent volatiles by volume:

Reactivity

Stability indicator/materials to avoid: yes
strong oxidizing agents, strong lewis or mineral acids.

hazardous decomposition products: co, nox, aldehydes, acids and
undetermined organics.

conditions to avoid polymerization: avoid mixing resin/curing agent in
batches > 1 lb total. Do not heat mixed adhesive above 75f unless
curing sur bonded.

Proper Disposal

Waste disposal methods: dispose of as hazardous waste according to
d.O.T. Hazard class. If not regulated by d.O.T., dispose of as
orm-e. Disposal method can be land burial orchemical incineration
as regulated by all governmental agencies.

disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.

Ingredients List

Ingred name: triglycidyl p-aminophenol epoxy resin
cas: 5026-74-4
fraction by wt:

Hazards

Routes of entry: inhalation: yes skin: yes ingestion: yes
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: may cause skin irritation and possible
allergic reactions. Prolonged and repeated contact may cause
sensitization which will result in allergic reactions.

effects of overexposure: skin rash, irritation.

First Aid

First aid: flush skin and eye contact with plenty of water. Wash skin
thoroughly with soap and water, rubbing alcohol or hand cleaner. Do
not use solvents. Remove soiled clothing and wash before reuse. If
irrita tion persists, see physician.

Chemical Properties

Hcc: b3
boiling pt: b.P. Text: decomposes
vapor pres:
vapor density: nil
spec gravity: > 1
evaporation rate & reference: nil
solubility in water: nil
appearance and odor: amber liquid with slight odor

Reactivity

Stability indicator/materials to avoid: yes
strong oxidizing agents, strong lewis or mineral acids.

stability condition to avoid: na
hazardous decomposition products: co, no2, aldehydes, acids and
undetermined organics.

conditions to avoid polymerization: avoid mix resin/curing agent in
batches greater than 1 lb total. Do not heat mixed adhesive above
100f unless curing

Proper Disposal

Waste disposal methods: dispose of as hazardous waste according to
federal, state and local regulations.

disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.

Ingredients List

Ingred name: epoxy resin system
fraction by wt: na
other rec limits: none specified

ingred name: 4-glycidyloxy-n,n-diglycidylaniline
cas: 5026-74-4
fraction by wt: < 65%
other rec limits: none specified

ingred name: voc: < 10 g/l
rtecs #: 9999999vo
other rec limits: none specified

Hazards

Routes of entry: inhalation: yes skin: yes ingestion: yes
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: material is corrosive to skin. May
cause chemical burn to skin and severe burns to eyes. Vapors are
irritating and may cause chest discomfort and bronchitis symptoms.

medical cond aggravated by exposure: na

First Aid

First aid: flush skin and eye contact with plenty of water. Wash skin
thoroughly with soap and water, rubbing alcohol or hand cleaner. Do
not use solvents. Remove soiled clothing and wash before reuse. If
irrita tion persists, see physician.

Chemical Properties

Hcc: b2
boiling pt: b.P. Text: decomposes
vapor pres: na
vapor density: nil
spec gravity: > 1
evaporation rate & reference: nil
solubility in water: nil
appearance and odor: amber liquid with amoniacal odor
percent volatiles by volume: na

Reactivity

Stability indicator/materials to avoid: yes
strong oxidizing agents, strong lewis or mineral acids.

stability condition to avoid: na
hazardous decomposition products: co, no2, aldehydes, acids and
undetermined organics.

Proper Disposal

Waste disposal methods: dispose of as hazardous waste according to
federal, state and local regulations.

disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.

Ingredients List

Ingred name: epoxy resin system
fraction by wt: na
other rec limits: none specified

ingred name: diethylene triamine
cas: 111-40-0
rtecs #: ie1225000
fraction by wt: < 15%
other rec limits: none specified
osha pel: 1 ppm
acgih tlv: s, 1 ppm; 9192

ingred name: triethylenetetramine
cas: 112-24-3
rtecs #: ye6650000
fraction by wt: < 10%
other rec limits: none specified

Hazards

ld50 lc50 mixture: mixture has not been tested as a whole.

route of entry inds - inhalation: yes
skin: yes
ingestion: no
carcinogenicity inds - ntp: no
iarc: no
osha: no
effects of exposure: brief contact may irrit skin or cause a rash. Repeated or
prolonged skin contact may result in allergic sensitization.

explanation of carcinogenicity: neither this material nor any of it's
components is considered a carcinogen.

signs and symptions of overexposure: skin rash, irritation.

medical cond aggravated by exposure: skin sensitization.

first aid: eye: flush w/water for 15mins. If irrit persists get med attn.

skin: wash thoroughly w/soap & water. If irrit persists get med attn.

inhal: remove victim to fresh air. If symptoms persist get med attn. I
ngest: drink plenty of water. Get med attn immed.

Chemical Properties

hcc: n1
b.P. Text: undefined
decomp text: untested
vapor pres: nil
vapor density: >1
spec gravity: 1.25
viscosity: 5000-9000 brk
solubility in water: negligible.

appearance and odor: viscous gray paste, slight odor
corrosion rate: na

HAZCOM Label

product id: ea 956 part a (aa9112)
cage: 33564
company name: dexter corporation adhesive & coating systems
street: 2850 willow pass road
po box: 312
city: bay point ca
zipcode: 94565-3299
health emergency phone: 800-424-9300(chemtrec)
label required ind: y
date of label review: 12/16/1998
status code: c
label date: 12/16/1998
origination code: g
hazard and precautions: brief contact may irrit skin or cause a rash. Repeated
or prolonged skin contact may result in allergic sensitization.

sk in rash,
irritation.

Transportation

=======================================================
responsible party cage: 33564
trans id no: 72747
product id: ea 956 part a (aa9112)
msds prepared date: 01/01/1993
review date: 02/20/1996
mfn: 6
multiple kit number: 0
kit part ind: y
review ind: y
unit of issue: kt
container qty: 6

Reactivity

=======================================================
stability indicator: yes
stability condition to avoid: avoid mixing parts a&b in batches >1lb & heating
mixture >75f.

materials to avoid: strong oxidizing agents, strong lewis or mineral acids.

hazardous decomposition products: co, nox, aldehydes, acids & undetermined
organics.

hazardous polymerization indicator: yes
conditions to avoid polymerization: no information provided by mfg.

Proper Disposal

spill release procedures: wear protective clothing, gloves & safety
glasses. Scrape up or shovel into dot approved waste containers.

waste disposal methods: not rcra haz waste.However, incineration in epa
approved waste incinerator is preferred.Chem additions/ processing/otherwise
altering matl may make waste management infor herein incomplete/inaccurate/
inappropriate.Consult state/loc regulations.

handling and storage precautions: refrigerated storage is recommended to
maintain product quality. This product may be stored @ room temp (77f) for up
to 12 months.

other precautions: follow curing schedule as recommended in product
literature.Don't cut/grind/weld/drill on/near container.Avoid mixing parts
a&b in batches >1lb unless plan to use immed.Don't heat mixed adhesive
>75f unless curing surfaces to be bonded.

Hazards

Chemical Properties

hcc: n1
b.P. Text: 405f,207c
vapor density: >1.0
spec gravity: 0.96
ph: notest
viscosity: 10.0-30.0brk.

solubility in water: 100%
appearance and odor: amber liquid, ammoniacal odor
corrosion rate: na

HAZCOM Label

product id: ea 956, part b (ab9112)s9257016)
cage: 33564
company name: dexter corporation adhesive & coating systems
street: 2850 willow pass road
po box: 312
city: bay point ca
zipcode: 94565-3299
health emergency phone: 800-424-9300(chemtrec)
label required ind: y
date of label review: 12/16/1998
status code: c
label date: 12/16/1998
origination code: g

Transportation

=======================================================
responsible party cage: 33564
trans id no: 72748
product id: ea 956, part b (ab9112)s9257016)
msds prepared date: 08/01/1991
review date: 02/22/1996
mfn: 7
multiple kit number: 0
kit part ind: y
review ind: y
unit of issue: kt
container qty: 6

Reactivity

=======================================================
stability indicator: yes
stability condition to avoid: don't mix batches a&b >1lb unless used
immediately. Don't heat mixed adhesive >125f unless curing surfaces to be
bonded.

materials to avoid: strong oxidizing agents, strong lewis or mineral acids.

Proper Disposal

Hazards

Ld50 lc50 mixture: oral ld50(rat): >4000 mg/kg (see supp)
routes of entry: inhalation: yes skin: no ingestion: no
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: skin: irritation. Repeated/prolonged
skin contact may result in allergic sensitization.

explanation of carcinogenicity: none
effects of overexposure: irritation, rash.

medical cond aggravated by exposure: skin sensitization.

First Aid

First aid: eyes: flush w/water for 15 mins. Skin: wash thoroughly w/soap
& water. Inhalation: remove to fresh air. Ingestion: drink plenty
of water. Obtain medical attention in all cases.

Chemical Properties

Hcc: n1
vapor pres: nil
vapor density: >1
spec gravity: 1.25
viscosity: *
solubility in water: negligible
appearance and odor: amber liquid paste w/slight odor.

Reactivity

Stability indicator/materials to avoid: yes
strong oxidizing agents, strong lewis/mineral acids.

stability condition to avoid: avoid mixing resin & curing agent in
batches >1 lb unless you plan to use immediately. (see supp)
hazardous decomposition products: co, nitrogen oxides, acids,
undertermined organics, aldehydes

Proper Disposal

Waste disposal methods: incineration in an epa-approved waste
incinerator is preferred. Chemical additions, processing/otherwise
altering material may make management information herein
incomplete, inaccurate/inappropriate. dispose of iaw/federal,
state & local regulations.

disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.

Ingredients List

Ingred name: epoxy polymer
fraction by wt: 40-70%

ingred name: 4-glycidyloxy-n,n-diglycidylaniline *96-3*
cas: 5026-74-4
rtecs #: rr0504000
fraction by wt: 30-60%

ingred name: volatile organic content:
rtecs #: 9999999vo

Hazards

Ld50 lc50 mixture: oral ld50(rat): >4000 mg/kg (see supp)
routes of entry: inhalation: yes skin: no ingestion: no
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: skin/eyes: corrosive, chemical burns,
irritation. Inhalation: nose & throat irritation.

repeated/prolonged skin contact may result in burns & possible
allergic sensitization.

explanation of carcinogenicity: none
effects of overexposure: irritation, chest discomfort, burns.

medical cond aggravated by exposure: skin sensitization.

First Aid

First aid: eyes: flush w/water for 15 mins. Skin: wash thoroughly w/soap
& water. Inhalation: remove to fresh air. Ingestion: drink plenty
of water. Obtain medical attention in all cases.

Chemical Properties

Hcc: c2
boiling pt: b.P. Text: 405f
vapor density: >1
spec gravity: 0.96
viscosity: *
solubility in water: complete
appearance and odor: amber liquid w/ammoniacal odor.

Reactivity

Stability indicator/materials to avoid: yes
strong oxidizing agents, strong lewis/mineral acids.

stability condition to avoid: avoid mixing resin & curing agent in
batches >1 lb unless you plan to use immediately. (see supp)
hazardous decomposition products: co, nitrogen oxides, aldehydes,
undetermined organics.

Proper Disposal

Waste disposal methods: incineration in an epa-approved waste
incinerator is preferred. Chemical additions, processing/otherwise
altering material may make management information herein
incomplete, inaccurate/inappropriate. dispose of iaw/federal,
state & local regulations.

disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.

Ingredients List

Ingred name: polyamide resin
fraction by wt: 40-70%

ingred name: diethylenetriamine, ethylenediamine, n-(2-aminoethyl);
bis(2-aminoethyl)amine *96-3*
cas: 111-40-0
rtecs #: ie1225000
fraction by wt: 10-30%
other rec limits: 4 mg/cum
acgih tlv: 1 ppm (skin)

ingred name: triethylenetetramine, epoxy hardner
cas: 112-24-3
rtecs #: ye6650000
fraction by wt: 5-10%

ingred name: volatile organic content:
rtecs #: 9999999vo

Hazards

Effects of overexposure: brief contact may irritate the skin or cause a
rash. Repeated or prolonged skin contact result in allergic
sensitization.

medical cond aggravated by exposure: skin sensitization.

First Aid

First aid: eye: flush eyes with water for 15 minutes. Skin: wash skin
thoroughly with soap and water. Inhalation: remove victim to fresh
air. ingestion: drink plenty of water.

Chemical Properties

Vapor pres: mmhg: nil
vapor density: air=1: >1
spec gravity: water=1: 1.25
voc pounds/gallon: 10
viscosity: p: 5000-9000
solubility in water: negligible
appearance and odor: amber liquid with slight odor

Reactivity

Stability indicator/materials to avoid: yes
strong oxidizing agents, strong lewis or mineral acids.

stability condition to avoid: avoid mixing resin (part a) and curing
agent (part b) in batches greater than 1 pound unless you plan to
use immediately. Do not heat mixed adhesive above 125 deg.F .

hazardous decomposition products: co, nox, aldehydes, acids and
undetermined organics.

conditions to avoid polymerization: may occur.

Proper Disposal

Waste disposal methods: disposal as a waste, this material, as a waste,
is not considered a rcra hazardous waste, however, incineration in
an epa approved waste incinerator is a preferred disposal practice.

disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.

Ingredients List

Ingred name: epoxy polymer proprietary
minumum % wt: 40.

maxumum % wt: 70.


ingred name: 4-glycidyloxy-n,n-diglycidyl-aniline
cas: 5026-74-4
code: f
rtecs #: rr0504000
minumum % wt: 30.

maxumum % wt: 60.

Hazards

Health hazards acute and chronic: signs and symptoms of exposure: skin
or eye irritation, chest discomfort. Immediate effects: material is
corrosive to eyes and skin. Brief contact may cause chemical burns.

vapors and mists will irrit ate nose and throat. Long term effects:
repeated or prolonged skin contact may result in burns and possible
allergic sensitization.

effects of overexposure: this material is corrosive to eyes and skin.

brief contact may cause chemical burns. Vapors and mists will
irritate nose and throat.

medical cond aggravated by exposure: skin sensitization.

First Aid

First aid: eye: flush eyes with lots of running water for 15 minutes.

skin: wash skin thoroughly with soap and water. Inhalation: remove
victim to fresh air. ingestion: drink plenty of water.

Chemical Properties

Boiling pt: =207.2c, 405.F
melt/freeze pt: m.P/f.P text: none
decomp temp: decomp text: none
vapor pres: mmhg: vapor density: air=1: >1
spec gravity: water=1: 0.96
voc pounds/gallon: 10
viscosity: p: 10-30
solubility in water: 100%
appearance and odor: amber liquid with ammoniacal odor

Reactivity

Stability indicator/materials to avoid: yes
strong oxidizing agents, strong lewis or mineral acids.

stability condition to avoid: (part b ) in batches.

hazardous decomposition products: co, nox, aldehydes, acids and
undetermined organics.

conditions to avoid polymerization: may occur.

Proper Disposal

Waste disposal methods: this material, as a waste, is not considered a
rcra hazardous waste. However, incineration in an epa-approved
incinerator is a preferred disposal practice. Chemical additions,
processing, or otherwise altering this material may make the waste
management information herein incomplete, inaccurate,or o therwise
inappropriate. Follow state and local req
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.

Ingredients List

Ingred name: polyamide resin proprietary
minumum % wt: 40.

maxumum % wt: 70.


ingred name: diethylenetriamine
cas: 111-40-0
rtecs #: ie1225000
minumum % wt: 10.

maxumum % wt: 30.

acgih tlv: 4.2 mg/m3;1 ppm

ingred name: triethylenetetramine
cas: 112-24-3
rtecs #: ye6650000
minumum % wt: 5.

maxumum % wt: 10.