NationalStockNumber.INFO
Worldwide distributor of NSN parts and consumables located in the USA.
Worldwide distributor of NSN parts and consumables located in the USA.
A substance compounded for binding materials together by surface attachment. It is not used primarily to fill voids or pores or for sealing purposes. Excludes canada balsam; cement, watch jewel; film cement, photographic; gasket cement; and gasket shellac compound.
Send us a request for quote using the form below. Our team will contact you with an up to date pricing and availability quote ASAP.
Y - Indicates information is in the hazardous materials information resource system (hmirs).
PMICA - Item does not contain precious metal.
CRITL- The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
004620 - Adhesives: cements, glues, pastes noi
705 - Cement, liquid
9 - Other or no special handling required (sh)
A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
B - Construction materials: includes paint and related materials, prefabricated building, wood products, metal and composition mater
R - Flammable liquids, un class 3 (flammable liquids label)
W - Rating variable
Questions & Answers: |
|
| What are the historical prices recorded for this stock number? | |
| No pre-dated pricing for this NSN could be found. | |
| Does NSN 8040-01-065-9956 have a shelf life? | |
| No. There is no shelf life applicable for this NSN. | |
| What NATO entities are users of this NSN? | |
| Germany, and Republic Of Korea | |
| What is the NIIN of NSN 8040-01-065-9956? | |
| 010659956 or 01-065-9956 | |
| Does NSN 8040-01-065-9956 require demilitarization? | |
| Yes - ITAR Controlled | |
| What is the most recent solicitation for NSN 8040-01-065-9956? | |
| No solicitations for this NSN. | |
| When was this national stock number assigned to the federal catalog? | |
| Sep 29, 1978 | |
Effects of overexposure: may be irritating to the skin.
First aid: wash with soap & water at first opportunity.
Hcc: n1
boiling pt: b.P. Text: >500 f
vapor pres:
spec gravity: 1.16
solubility in water: insoluble
appearance and odor: milky high viscosity liquid
percent volatiles by volume: 0
Stability indicator/materials to avoid: yes
strong acids, strong oxidizing agents
Waste disposal methods: bury in sanitary landfill in accordance
w/federal,state & local regulations.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: epoxy
Routes of entry: inhalation: yes skin: yes ingestion: yes
health hazards acute and chronic: may cause skin irritation and possible
allergic reactions. Prolonged and repeated contact may cause
sensitization which will result in allergic reactions.
explanation of carcinogenicity: n/k *failure to observe caution may
result in excessive heat build-up with the release of toxic gases.
effects of overexposure: skin/rash irritation.
First aid: flush skin and eye contact with plenty of water. Wash skin
thoroughly with soap and water, rubbing alcohol or hand cleaner. Do
not use solvents. Remove soiled clothing and wash before reuse. If
irrita tion persists, see physician.
Boiling pt: b.P. Text: >500
vapor pres:
vapor density: nil
spec gravity: 1.16
evaporation rate & reference: >1
solubility in water: insoluble
appearance and odor: milky, high viscosity liquid
Stability indicator/materials to avoid: yes
strong oxidizing agents, strong lewis or mineral acids.
hazardous decomposition products: co, nox, aldehydes, acids and
undetermined organics.
conditions to avoid polymerization: mixing resin/curing agent in batches
greater than 1 lb. Do not heat material unless curing surfaces to
be bonded.*
Waste disposal methods: dispose of as hazardous waste according to dot
hazard class. If not regulated by dot, dispose of as orm-e.
disposal method can be land burial or chemical incineration.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: silica, amorphous (filler particles are thoroughly wetted
by vehicle so airborne exposure does not occur unless cured*
cas: 112945-52-5
rtecs #: vv7310000
osha pel: 20 mppcf
ingred name: *material is subsequently ground, machined or sanded.
Routes of entry: inhalation: yes skin: yes ingestion: yes
health hazards acute and chronic: may cause skin irritation and possible
allergic reactions. Prolonged and repeated contact may cause
sensitization which will result in allergic reactions.
explanation of carcinogenicity: n/k *failure to observe caution may
result in excessive heat build-up with the release of toxic gases.
effects of overexposure: skin/rash irritation.
First aid: flush skin and eye contact with plenty of water. Wash skin
thoroughly with soap and water, rubbing alcohol or hand cleaner. Do
not use solvents. Remove soiled clothing and wash before reuse. If
irrita tion persists, see physician.
Boiling pt: b.P. Text: >600f,>316c
vapor pres:
vapor density: 9
spec gravity: >1
evaporation rate & reference:
solubility in water: nil
appearance and odor: amber, high viscosity liquid, sulfuric odor
Stability indicator/materials to avoid: yes
strong oxidizing agents, strong lewis or mineral acids.
hazardous decomposition products: co, nox, aldehydes, acids and
undetermined organics.
conditions to avoid polymerization: mixing resin/curing agent in batches
greater than 1 lb. Do not heat material unless curing surfaces to
be bonded.*
Waste disposal methods: dispose of as hazardous waste according to dot
hazard class. If not regulated by dot, dispose of as orm-e.
disposal method can be land burial or chemical incineration.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: silica, amorphous (filler particles are thoroughly wetted
by vehicle so airborne exposure does not occur unless cured *
cas: 112945-52-5
rtecs #: vv7310000
osha pel: 20 mppcf
ingred name: *material is subsequently ground, machined or sanded.)
ingred name: ethylene glycol (sara iii)
cas: 107-21-1
rtecs #: kw2975000
osha pel: c 50 ppm
acgih tlv: c 50 ppm,vapor; 9192
epa rpt qty: 1 lb
dot rpt qty: 1 lb
ingred name: 2,4,6-tri(dimethylaminomethyl) phenol
cas: 90-72-2
rtecs #: sn3500000
Ld50 lc50 mixture: tlv = 5 ppm
routes of entry: inhalation: yes skin: yes ingestion: yes
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: eye: liq contact causes severe
irritation/possible cornea damage. Skin: severe irritation/lesions.
allergenic causing sensitization dermatitis. Can be absorbed. High
health hazard due to corneal damage /severe skin iritt. Inhalation:
exposure to mist/vapor causes respiratory tract irritation.
ingestion: slightly toxic.
effects of overexposure: nk *keep airway clear. Get medical aid. Note to
dr: may not be adviseable to induce vomiting if severe damage to
digestive tract has occurred.
medical cond aggravated by exposure: chronic overexposure may aggravate
existing skin/eye/lung condition.
First aid: eyes: flush w/plenty water >15 minutes, holding lids open.
wash w/in 1 min. Skin: wash thoroughly w/soap & water. Remove/wash
clothes before reuse. Discard shoes contaminated on inner surfaces.
get me d aid if irritation develops. Inhalation: move to fresh air.
ingestion: dilute w/water & call dr. Never give anything by mouth
to unconscious person. Don't induce vomiting. If vomiting
spontaneously*
Boiling pt: b.P. Text: >500f,>260c
vapor pres: nil
vapor density: not est.
spec gravity: 1.17
evaporation rate & reference: not est.
solubility in water: insoluble
appearance and odor: clear, medium viscosity liquid, mild odor
percent volatiles by volume: 0.0
Stability indicator/materials to avoid: yes
none
stability condition to avoid: do not heat over 200c.
hazardous decomposition products: maleic anhydride
Waste disposal methods: na
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: epoxy resin
cas: 25068-38-6
rtecs #: kc2100000
fraction by wt: 30-60%
other rec limits: none recommended
Ld50 lc50 mixture: tlv = 5 ppm
routes of entry: inhalation: yes skin: yes ingestion: yes
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: eye: liq contact causes severe
irritation/possible cornea damage. Skin: severe irritation/lesions.
allergenic causing sensitization dermatitis. Can be absorbed. High
health hazard due to corneal damage /severe skin iritt. Inhalation:
exposure to mist/vapor causes respiratory tract irritation.
ingestion: slightly toxic.
effects of overexposure: nk *keep airway clear. Get medical aid. Note to
dr: may not be adviseable to induce vomiting if severe damage to
digestive tract has occurred.
medical cond aggravated by exposure: chronic overexposure may aggravate
existing skin/eye/lung condition.
First aid: eyes: flush w/plenty water >15 minutes, holding lids open.
wash w/in 1 min. Skin: wash thoroughly w/soap & water. Remove/wash
clothes before reuse. Discard shoes contaminated on inner surfaces.
get me d aid if irritation develops. Inhalation: move to fresh air.
ingestion: dilute w/water & call dr. Never give anything by mouth
to unconscious person. Don't induce vomiting. If vomiting
spontaneously*
Boiling pt: b.P. Text: 248f,120c
vapor pres: na
vapor density: na
spec gravity: 1.2
evaporation rate & reference: na
solubility in water: 0.0
appearance and odor: amber, low viscosity liquid, pungent odor
percent volatiles by volume: 0.0
Stability indicator/materials to avoid: yes
none
stability condition to avoid: do not heat over 200c.
hazardous decomposition products: maleic anhydride
Waste disposal methods: na
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: 2,4,6-tri(dimethylaminomethyl) phenol
cas: 90-72-2
rtecs #: sn3500000
fraction by wt: 5-10%
other rec limits: none recommended
osha pel: 5 ppm
acgih tlv: 5 ppm
ingred name: mercaptan terminated polymer
fraction by wt: 60-100%
other rec limits: none recommended