NationalStockNumber.INFO
Worldwide distributor of NSN parts and consumables located in the USA.
Worldwide distributor of NSN parts and consumables located in the USA.
A substance compounded for binding materials together by surface attachment. It is not used primarily to fill voids or pores or for sealing purposes. Excludes canada balsam; cement, watch jewel; film cement, photographic; gasket cement; and gasket shellac compound.
Send us a request for quote using the form below. Our team will contact you with an up to date pricing and availability quote ASAP.
Y - Indicates information is in the hazardous materials information resource system (hmirs).
PMICA - Item does not contain precious metal.
CRITL- The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
004620 - Adhesives: cements, glues, pastes noi
705 - Cement, liquid
9 - Other or no special handling required (sh)
A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
B - Construction materials: includes paint and related materials, prefabricated building, wood products, metal and composition mater
W - Rating variable
W - Rating variable
Z - No special type of cargo code applicable
Questions & Answers: |
|
| What are the historical prices recorded for this stock number? | |
| Historical data shows pricing from $863.26 to $1,438.76.. | |
| Does NSN 8040-01-137-8442 have a shelf life? | |
| No. There is no shelf life applicable for this NSN. | |
| What NATO entities are users of this NSN? | |
| Spain | |
| What is the NIIN of NSN 8040-01-137-8442? | |
| 011378442 or 01-137-8442 | |
| Does NSN 8040-01-137-8442 require demilitarization? | |
| Yes - ITAR Controlled | |
| What is the most recent solicitation for NSN 8040-01-137-8442? | |
| No solicitations for this NSN. | |
| When was this national stock number assigned to the federal catalog? | |
| Sep 04, 1982 | |
Ld50 lc50 mixture: ld50 = 1000 mg/kg (rat)
routes of entry: inhalation: no skin: yes ingestion: no
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: if contacted, may cause moderate
irritation and sensitization.
effects of overexposure: moderate irritation & sensitibation.
medical cond aggravated by exposure: none stated.
First aid: eye: flush eyes with water for 15 minutes; skin: wash with
soap and water at first opportunity. Remove contaminated clothing
and wash before reuse; inhale: remove to fresh air. Give oxygen if
breathin g is difficult; ingest: if conscious, give large
quantities of water or milk. Induce vomiting. Call a physician.
Hcc: n1
decomp temp: decomp text: 356f/180c
vapor pres: nil
spec gravity: 1.54
solubility in water:
appearance and odor: paste,grey,odorless
percent volatiles by volume: nil
Stability indicator/materials to avoid: yes
co,co*2,nitrogen oxides.
stability condition to avoid: high temp,direct sunlight.
conditions to avoid polymerization: temp above 450f.
Waste disposal methods: landfill or incinerate in accordance with
federal,state or local regulations.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: 4-glycidyloxy-n,n-diglycidylaniline(cas#5026-74-4),(40-60
wt%)
fraction by wt: 50%
Ld50 lc50 mixture: oral ld50 (rat) is >830 mg/kg
routes of entry: inhalation: no skin: yes ingestion: no
reports of carcinogenicity: ntp: yes iarc: yes osha: yes
health hazards acute and chronic: moderate skin and oral toxicity,
severe eye irritation with burns possible. Excessive or chronic
exposure may result in liver damage.
explanation of carcinogenicity: 4,4'-methylenedianiline is a suspected
carcinogen.
effects of overexposure: moderate skin and oral toxicity, severe eye
irritation with burns possible. Excessive or chronic exposure may
result in liver damage.
medical cond aggravated by exposure: individuals with pre-existing skin
disorders are at a greater than normal risk when exposed to this
material.
First aid: eyes: flush with running water for 15 minutes while holding
eyelid. Get medical attention immediately. Skin: wash with water.
remove contaminated clothing. Get medical attention. Inhalation:
remove to fresh air. Give mouth-to-mouth resuscitation if not
breathing. Get medical attention. Ingestion: if conscious give
large drink of water or milk and induce vomiting. Get medical
attention immediately.
Hcc: n1
spec gravity: 1.02
solubility in water: moderate
appearance and odor: black viscous liquid, ammonical odor
percent volatiles by volume: 0
Stability indicator/materials to avoid: yes
strong oxidizing agents
stability condition to avoid: extremely high temperatures
hazardous decomposition products: carbon monoxide, carbon dioxide, and
oxides of nitrogen.
Waste disposal methods: landfill or incinerate in accordance with
federal,state or local regulations.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: polyamide resin
cas: 68410-23-1
fraction by wt: 50-70%
other rec limits: none specified
ingred name: triethylene tetramine
cas: 112-24-3
rtecs #: ye6650000
fraction by wt: 2-10%
other rec limits: none specified
ingred name: 4,4'-methylene dianiline (sara iii)
cas: 101-77-9
rtecs #: by5425000
fraction by wt: 10-30%
other rec limits: none specified
acgih tlv: s; 0.1 ppm; a2; 9192
epa rpt qty: 1 lb
dot rpt qty: 1 lb
ingred name: 2-ethyl-4-methylimidazole
cas: 931-36-2
fraction by wt: 2-10%
other rec limits: none specified
Ld50 lc50 mixture: n/k
routes of entry: inhalation: no skin: no ingestion: no
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: no anticipated chronic effects.Epoxy
resins are potential dermal sensitizers.
explanation of carcinogenicity: none
effects of overexposure: eyes: direct eye contact with the product may
cause irritation.Skin: epoxy resins are potential dermal
sensitizers.Ingestion: n/k .Inhalation: not a normal route of
exposure.
medical cond aggravated by exposure: no known effects on other
illnesses.
First aid: eyes: immediately flush with water for at least 15 minutes
.Consult physician if irritation persists.Skin: wash affected area
with soap and water.Ingestion/inhalation: n/k .
Boiling pt: b.P. Text: n/k
melt/freeze pt: m.P/f.P text: n/k
decomp temp: decomp text: n/k
vapor pres: n/k
vapor density: n/k
spec gravity: 1.54 (water=1)
ph: 7.0
evaporation rate & reference: n/k
solubility in water: n/k
appearance and odor: grey paste with sweet,aromatic odor.
Stability indicator/materials to avoid: yes
strong oxidizing agents.
stability condition to avoid: n/k
hazardous decomposition products: incomplete combustion can yield low
molecular weight hydrocarbons,as well as carbon monoxide and carbon
dioxide.
conditions to avoid polymerization: will not occur.
Waste disposal methods: disp must be iaw fed,state,& loc
regs.Coordination w/ supporting installation/macom environ
coordination prior to disp is rec to determ approp disp meth .Incin
or disp of in approved indus landf ill.For additional help contact
fiber-resin corp.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: aluminum powder.Osha pel for total dust.Osha pel 5
mg(al)/m3 resp dust.Acgih tlv for pyro powder.
cas: 7429-90-5
rtecs #: bd0330000
fraction by wt:
other rec limits: n/k
osha pel: 15 mg(al)/m3
acgih tlv: 5 mg(al)/m3
ingred name: epoxy novolac resin
cas: 28604-14-4
fraction by wt:
other rec limits: n/k
osha pel: n/k
acgih tlv: n/k
ingred name: 4-glycidyloxy-n,n-diglycidylaniline
cas: 5026-74-4
fraction by wt:
other rec limits: n/k
osha pel: n/k
acgih tlv: n/k
ingred name: trade secret component
other rec limits: n/k
osha pel: n/k
acgih tlv: n/k
ingred name: volatile organic compound:
rtecs #: 9999999vo
other rec limits: n/k
osha pel: n/k
acgih tlv: n/k
ingred name: volatile organic compounds
rtecs #: 9999999vo
other rec limits: n/k
osha pel: n/k
acgih tlv: n/k
Ld50 lc50 mixture: n/k
routes of entry: inhalation: yes skin: yes ingestion: yes
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: corrosive liquid.Vapors are
harmful.Strong dermal sensitizer.
explanation of carcinogenicity: none
effects of overexposure: corrosive liquid.Eyes: strong
irritant.Skin: contact will cause severe
irritation.Ingestion: corrosive liquid.Inhalation: inhalation of
vapors may cause respiratory irritation.Vapors are harmful.
medical cond aggravated by exposure: inhalation of vapors could
aggravate asthmatic conditions.
First aid: eyes: flush immediately with water for at least 15 minutes
.Consult md if irritation persists.Skin: wash affected area with
soap and water.After contact apply skin creams.Ingestion: n/k
.Inhalation: n/k .
Boiling pt: b.P. Text: n/k
melt/freeze pt: m.P/f.P text: n/k
decomp temp: decomp text: n/k
vapor pres: n/k
vapor density: n/k
spec gravity: 1.02 (water=1)
ph: >7
evaporation rate & reference: n/k
solubility in water: n/k
appearance and odor: viscous,black liquid with ammoniacal odor.
Stability indicator/materials to avoid: yes
strong oxidizing agents.
stability condition to avoid: n/k
hazardous decomposition products: incomplete combustion can yield low
molecular weight hydrocarbons,carbon monoxide,carbon dioxide and
nitrogen compounds.
conditions to avoid polymerization: will not occur.
Waste disposal methods: disp must be iaw fed,state,& loc
regs.Coordination w/ supporting installation/macom environmental
coordination prior to disp is rec to determ appropriate disp meth
.Dot corrosive.However,does no t meet rcra definition of corrosive
waste.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: triethylene tetramine
cas: 112-24-3
rtecs #: ye6650000
fraction by wt:
other rec limits: n/k
osha pel: n/k
acgih tlv: n/k
ingred name: polyamide resin
cas: 68410-23-1
fraction by wt: >50%
other rec limits: n/k
osha pel: n/k
acgih tlv: n/k
ingred name: diethylenetoluenediamine
cas: 68479-98-1
fraction by wt: >10%
other rec limits: n/k
osha pel: n/k
acgih tlv: n/k
ingred name: 2-ethyl-4-methylimidazole
cas: 931-36-2
fraction by wt:
other rec limits: n/k
osha pel: n/k
acgih tlv: n/k
ingred name: trade secret components
other rec limits: n/k
osha pel: n/k
acgih tlv: n/k
ingred name: volatile organic compound:
rtecs #: 9999999vo
other rec limits: n/k
osha pel: n/k
acgih tlv: n/k