Worldwide distributor of NSN parts and consumables located in the USA.
A film of pressure sensitive adhesive, reinforced by tissue fibers, backed on both sides by paper which has been treated to prevent bonding until ready to use. It bonds permanently to paper, glass, plastic, wood and the like. Excludes tissue, dry mounting, photographic; and plastic sheet, pressure sensitive adhesive coated.
The last inventory check on this NSN was done on 09/29/2021. Due to rapid changes in inventory this may not be the current stock qty.
Send us a request for quote using the form below. Our team will contact you with an up to date pricing and availability quote ASAP.
Paper and paperboard, pressure-sensitive, in strips or rolls
Paper and paperboard, gummed or adhesive, including self-adhesive, in rolls or sheets
Newsprint
Y - Indicates information is in the hazardous materials information resource system (hmirs).
PMICA - Item does not contain precious metal.
CRITL- The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
004620 - Adhesives: cements, glues, pastes sub5
622 - Shellac
A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
C - Chemical corps items and all other chemicals not covered in other classificatons. note: when an item has a chemical proper shipp
S - 60.0
S - 60.0
Z - Other or no special handling required (sh)
Z - No special type of cargo code applicable
Questions & Answers: |
|
What are the historical prices recorded for this stock number? | |
No pre-dated pricing for this NSN could be found. | |
Does NSN 8040-01-138-3412 have a shelf life? | |
No. There is no shelf life applicable for this NSN. | |
What NATO entities are users of this NSN? | |
Singapore, Republic Of Korea, and Greece | |
What is the NIIN of NSN 8040-01-138-3412? | |
011383412 or 01-138-3412 | |
Does NSN 8040-01-138-3412 require demilitarization? | |
Yes - ITAR Controlled | |
What is the most recent solicitation for NSN 8040-01-138-3412? | |
No solicitations for this NSN. | |
When was this national stock number assigned to the federal catalog? | |
Sep 11, 1982 |
Effects of overexposure: prolonged or repeated skin contact may cause
sensitization and rash.
First aid: skin: wash with soap and water. Eyes: flush eyes with water
for 15 minutes. Get medical attention.
Vapor pres:
spec gravity: 1.2
evaporation rate & reference: non-volatile
solubility in water:
appearance and odor: gray - no odor
percent volatiles by volume: 0
Stability indicator/materials to avoid: no
acids and bases
stability condition to avoid: temperature over 300f.
hazardous decomposition products: carbon monoxide/carbon dioxide
conditions to avoid polymerization: heat
Waste disposal methods: normal land fill
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: asbestos (amianthus, obsolete amosite), (for osha pel, see
29cfr 1910.1101)
cas: 1332-21-4
rtecs #: ci6475000
fraction by wt: 3.5%
osha pel: 0.2 fibers/cc
acgih tlv: 0.5 fibers/cc; a1;89
epa rpt qty: 1 lb
dot rpt qty: 1 lb
Routes of entry: inhalation: no skin: yes ingestion: no
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: skin/eye: irritation.
explanation of carcinogenicity: none
effects of overexposure: skin: irritation, sensitization & dermatitis.
First aid: eye: flush w/water for at least 15 minutes. Get medical
attention. Skin: wash w/soap & water. Any material adhering to skin
should be removed with resin removing creams. Don't use solvent.
ingestion: if conscious, give large quantities of water. Get
medical attention. Inhalation: remove to fresh air. Call physician.
remove & wash contaminated clothing prior to reuse.
Melt/freeze pt: m.P/f.P text: 60c
decomp temp: decomp text: >300c
spec gravity: 1.3
solubility in water: insoluble
appearance and odor: gray film, slight odor.
percent volatiles by volume:
Stability indicator/materials to avoid: yes
strong oxidizers, acids & bases.
stability condition to avoid: avoid conditions >300f.
hazardous decomposition products: co, co2, nitrogen oxides & other toxic
organic species.
Waste disposal methods: not a hazardous waste under rcra. Doesn't
contain any chemical listed by sara/title ii.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: bisphenol a epoxy resin
ingred name: epoxy novolac polymer
ingred name: glycidyl amino phenol
Routes of entry: inhalation: yes skin: yes ingestion: yes
reports of carcinogenicity: ntp: yes iarc: yes osha: yes
health hazards acute and chronic: skin: irritation, sensitization,
allergic reactions, dermatitis, & redness. Ingestion/eyes:
irritation. Inhalation: lung cancer due to asbestos.
explanation of carcinogenicity: asbestos is a confirmed a1 carcinogen by
acgih.
effects of overexposure: skin: irritation, sensitization, allergic
reactions, dermatitis, & redness. Ingestion/eyes: irritation.
inhalation: lung cancer due to asbestos.
medical cond aggravated by exposure: sensitivity
First aid: eyes: flush w/copious amounts of water. Skin: wash w/copious
amounts of soap & water. Ingestion: give 2 glasses of water &
induce vomiting. Inhalation: remove to fresh air. Obtain medical
attention in all cases.
Melt/freeze pt: m.P/f.P text: >250f
vapor density:
solubility in water: negligible
appearance and odor: amber colored solid.
percent volatiles by volume: negl
Stability indicator/materials to avoid: yes
strong oxidizing agents, acids, alkalis, amines, & mercaptans
stability condition to avoid: temperatures >100f & heat
hazardous decomposition products: co, co2, or oxides of nitrogen
Waste disposal methods: incinerate or bury in landfill in accordance
w/federal, state, & local regulations. This product may be a
hazardous waste in california due to its asbestos content. Dot
un1133.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: epoxy/phenolic resins
fraction by wt: 66%
ingred name: amine hardener
fraction by wt:
ingred name: asbestos, chrysotile
cas: 12001-29-5
rtecs #: ci6478500
fraction by wt: 5%
osha pel: 0.2 fibers/cc
acgih tlv: 2 fibers/cc; a1;9192
ingred name: phenolic microballoons
fraction by wt: 25%