NationalStockNumber.INFO
Worldwide distributor of NSN parts and consumables located in the USA.
Worldwide distributor of NSN parts and consumables located in the USA.
A substance compounded for binding materials together by surface attachment. It is not used primarily to fill voids or pores or for sealing purposes. Excludes canada balsam; cement, watch jewel; film cement, photographic; gasket cement; and gasket shellac compound.
The last inventory check on this NSN was done on 06/24/2022. Due to rapid changes in inventory this may not be the current stock qty.
Send us a request for quote using the form below. Our team will contact you with an up to date pricing and availability quote ASAP.
Y - Indicates information is in the hazardous materials information resource system (hmirs).
PMICA - Item does not contain precious metal.
CRITL- The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
004620 - Adhesives: cements, glues, pastes noi
635 - Chemicals, other than drugs or sundries
9 - Other or no special handling required (sh)
A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
C - Chemical corps items and all other chemicals not covered in other classificatons. note: when an item has a chemical proper shipp
R - Flammable liquids, un class 3 (flammable liquids label)
W - Rating variable
Questions & Answers: |
|
| What are the historical prices recorded for this stock number? | |
| Historical data shows pricing from $0.08 to $0.14.. | |
| Does NSN 8040-01-189-1284 have a shelf life? | |
| No. There is no shelf life applicable for this NSN. | |
| What NATO entities are users of this NSN? | |
| Spain, Singapore, and United Kingdom | |
| What is the NIIN of NSN 8040-01-189-1284? | |
| 011891284 or 01-189-1284 | |
| Does NSN 8040-01-189-1284 require demilitarization? | |
| Yes - ITAR Controlled | |
| What is the most recent solicitation for NSN 8040-01-189-1284? | |
| No solicitations for this NSN. | |
| When was this national stock number assigned to the federal catalog? | |
| Sep 12, 1984 | |
Routes of entry: inhalation: yes skin: yes ingestion: yes
health hazards acute and chronic: may cause eye and skin irritation and
possible allergic reactions. Prolonged and repeated contact may
cause sensitization which will result in allergic reactions. Avoid
contact with eyes or skin.
effects of overexposure: skin rash, irritation.
First aid: flush skin and eye contact with plenty of water. Wash
thoroughly with soap and water, rubbing alcohol or hand cleaner. Do
not use solvents. Remove soiled clothing and wash before reuse. If
irritation persists, see physician.
Boiling pt: b.P. Text: decomposes
vapor pres:
vapor density: nil
spec gravity: >1
evaporation rate & reference: nil
solubility in water: nil
appearance and odor: pearlescent paste with pungent odor
Stability indicator/materials to avoid: yes
strong oxidizing agents, strong lewis or mineral acids.
hazardous decomposition products: co, nox, aldehydes, acids and
undetermined organics.
conditions to avoid polymerization: mixing resin/curing agent in batches
greater than 1 lb. Do not heat mixed adhesive unless curing
surfaces to be bonded.
Waste disposal methods: dispose of as hazardous waste according to
federal, state and local regulations.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: epoxy resin system
ingred name: silica
cas: 112945-52-5
rtecs #: vv7310000
fraction by wt:
osha pel: 20 mppcf
acgih tlv: 0.1 mg/m3
ingred name: voc
rtecs #: 9999999vo
Routes of entry: inhalation: yes skin: yes ingestion: yes
health hazards acute and chronic: material may be corrosive to skin and
eyes. High concentration of vapors can cause severe irritation of
eyes and respiratory tract. Liquid causes severe damage to mucous
membranes if swallowed. Prolon ged and repeated contact may cause
sensitization which will result in allergic reactions.
effects of overexposure: possible burns to eyes and skin; irritation and
possible sensitization to skin. Causes irritation to skin and eyes.
First aid: flush skin and eye contact with plenty of water. Wash
thoroughly with soap and water, rubbing alcohol or hand cleaner. Do
not use solvents. Remove soiled clothing and wash before reuse. If
irritation persists, see physician.
Boiling pt: b.P. Text: >400
vapor pres:
vapor density: >1
spec gravity: >1
evaporation rate & reference:
solubility in water: partial
appearance and odor: grey paste
Stability indicator/materials to avoid: yes
strong oxidizing agents, strong lewis or mineral acids.
hazardous decomposition products: co, nox, aldehydes, acids and
undetermined organics.
conditions to avoid polymerization: mixing resin/curing agent in batches
greater than 1 lb. Do not heat mixed adhesive unless curing
surfaces to be bonded.
Waste disposal methods: dispose of as hazardous waste according to
federal, state and local regulations.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: silica
cas: 112945-52-5
rtecs #: vv7310000
fraction by wt:
osha pel: 20 mppcf
acgih tlv: 0.1 mg/m3
ingred name: alpha-alumina (aluminum oxide) (epa lists only fibrous
forms) (sara iii)
cas: 1344-28-1
rtecs #: bd1200000
fraction by wt:
osha pel: 15 mg/m3 tdust
acgih tlv: 10 mg/m3 tdust; 9293
ingred name: alkylamine
fraction by wt:
ingred name: voc
rtecs #: 9999999vo
ld50 lc50 mixture: mixture has not been tested as a whole.
route of entry inds - inhalation: yes
skin: yes
ingestion: no
carcinogenicity inds - ntp: no
iarc: no
osha: no
effects of exposure: brief contact may irrit skin or cause a rash. Repeated or
prolonged skin contact may result in allergic sensitization. Carcinogenicity
note: bisphenol a/epichlorohydrin epoxy resin has exhibited mutag enicity in
bacteria.
explanation of carcinogenicity: neither this material nor any of its components
is considered a carcinogen.
signs and symptions of overexposure: skin rash, irritation.
medical cond aggravated by exposure: skin sensitization.
first aid: eye: flush w/water for 15mins. If irrit persists get med attn.
skin: wash thoroughly w/soap & water. If irrit persists get med attn.
inhal: remove victim to fresh air. If symptoms persist get med attn. I
ngest: drink plenty of water. Get med attn immed.
b.P. Text: undefined
decomp text: untested
vapor pres: nil
vapor density: >1
spec gravity: 1.22
viscosity: 1500-6000 brk
solubility in water: negligible.
appearance and odor: pearlescent paste, pungent odor
corrosion rate: na
product id: hysol ea 9314na part a (as9265016)
cage: 33564
company name: dexter corporation adhesive & coating systems
street: 2850 willow pass road
po box: 312
city: bay point ca
zipcode: 94565-3299
health emergency phone: 800-424-9300(chemtrec)
label required ind: y
date of label review: 12/16/1998
status code: c
label date: 12/16/1998
origination code: g
hazard and precautions: brief contact may irrit skin or cause a rash. Repeated
or prolonged skin contact may result in allergic sensitization.
carcinogenicity note: bisphenol a/epichlorohydrin epoxy resin has exhibited
mutag enicity in bacteria.
skin rash, irritation.
=======================================================
responsible party cage: 33564
trans id no: 113873
product id: hysol ea 9314na part a (as9265016)
msds prepared date: 03/01/1992
review date: 02/20/1996
mfn: 3
multiple kit number: 0
kit part ind: y
review ind: y
unit of issue: kt
container qty: 0
additional data: adhesive part b shipping = un 2735, packing group 3.
=======================================================
stability indicator: yes
stability condition to avoid: avoid mixing parts a & b in batches >0.5 lb &
heating mixture.
materials to avoid: strong oxidizing agents, strong lewis or mineral acids.
hazardous decomposition products: co, nox, aldehydes, acids & undetermined
organics.
hazardous polymerization indicator: yes
conditions to avoid polymerization: no information provided by mfg.
spill release procedures: wear protective clothing, gloves & safety
glasses. Scrape up or shovel into dot approved waste containers.
waste disposal methods: not rcra haz waste.However, incineration in epa
approved waste incinerator is preferred.Chem additions/ processing/otherwise
altering matl may make waste management infor herein incomplete/inaccurate/
inappropriate.Consult state/loc regulations.
handling and storage precautions: refrigerated storage is recommended to
maintain product quality. This product may be stored @ room temp (77f) for up
to 12 months.
other precautions: follow curing schedule as recommended in product
literature.Don't cut/grind/weld/drill on/near container.Avoid mixing parts
a&b in batches >1lb unless plan to use immed.Don't heat mixed adhesive
>75f unless curing surfaces to be bonded.
ld50 lc50 mixture: mixture has not been tested as a whole.
route of entry inds - inhalation: yes
skin: yes
ingestion: no
carcinogenicity inds - ntp: no
iarc: no
osha: no
effects of exposure: material is corrosive to eyes & skin. Brief contact
may cause chemical burns. Vapors & mists will irritate nose & throat.
repeated or prolonged skin contact may result in burns and possible allergic
s ensitization.
explanation of carcinogenicity: per msds neither this material nor any of its
components is considered a carcinogen.
signs and symptions of overexposure: skin & eye irritation. Chest
discomfort.
medical cond aggravated by exposure: skin sensitization.
first aid: eye: flush w/lots of running water for 15 mins. Get med attn immed.
skin: wash thoroughly w/soap & water. If irrit persists get med attn.
inhal: remove victim to fresh air. If symptoms persist get med attn. Ingest:
drink plenty of water. Get med attn immed.
b.P. Text: decomposes
vapor density: 8.45
spec gravity: nk3nk
ph: notest
solubility in water: negligible
appearance and odor: gray paste
corrosion rate: na
product id: hysol ea 9314na part b (as9265016)
cage: 33564
company name: dexter corporation adhesive & coating systems
street: 2850 willow pass road
po box: 312
city: bay point ca
zipcode: 94565-3299
health emergency phone: 800-424-9300(chemtrec)
label required ind: y
date of label review: 12/16/1998
status code: c
label date: 12/16/1998
origination code: g
hazard and precautions: material is corrosive to eyes & skin. Brief contact
may cause chemical burns. Vapors & mists will irritate nose & throat.
repeated or prolonged skin contact may result in burns and possible allergic
s ensitization.
skin & eye irritation. Chest discomfort.
=======================================================
responsible party cage: 33564
trans id no: 113874
product id: hysol ea 9314na part b (as9265016)
msds prepared date: 10/01/1992
review date: 07/17/1996
mfn: 4
multiple kit number: 0
kit part ind: y
review ind: y
unit of issue: kt
container qty: 0
=======================================================
stability indicator: yes
stability condition to avoid: avoid mixing a&b in batches >1lb unless used
immediately. Don't heat mixed adhesive unless curing surfaces to be bonded.
materials to avoid: strong oxidizing agents, strong lewis or mineral acids.
hazardous decomposition products: co, nox, aldehydes, acids & undetermined
organics.
hazardous polymerization indicator: yes
spill release procedures: wear protective clothing, gloves & safety
glasses. Absorb spill with absorbent material such as vermiculite or sand.
scrape up or shovel into dot approved waste containers.
waste disposal methods: matl not rcra haz waste. However, incineration in epa
approved waste incinerator preferred. Chem additions/processing/otherwise
altering matl may make waste mgmt info herein incomplete/inaccurate/inap
propriate.Consult state/local regs.
handling and storage precautions: prod may be stored @ rm temp (77f) for up to
12 mos. Keep cntnrs tightly closed when not in use. Empty cntnrs retain
residue; handle as if full.
other precautions: follow curing schedule/ratio as recommended in product
literature.Don't cut/grind/weld/drill on/near container.Avoid mixing parts
a&b in batches >1lb unless plan to use immed.Don't heat mixed adhesive
unless curing surfaces to be bonded.
ld50 lc50 mixture: mixture has not been tested as a whole.
route of entry inds - inhalation: yes
skin: yes
ingestion: no
carcinogenicity inds - ntp: no
iarc: no
osha: no
effects of exposure: brief contact may irrit skin or cause a rash. Repeated or
prolonged skin contact may result in allergic sensitization. Carcinogenicity
note: bisphenol a/epichlorohydrin epoxy resin has exhibited mutag enicity in
bacteria.
explanation of carcinogenicity: neither this material nor any of it's
components is considered a carcinogen.
signs and symptions of overexposure: skin rash, irritation.
medical cond aggravated by exposure: skin sensitization.
first aid: eye: flush w/water for 15mins. If irrit persists get med attn.
skin: wash thoroughly w/soap & water. If irrit persists get med attn.
inhal: remove victim to fresh air. If symptoms persist get med attn. I
ngest: drink plenty of water. Get med attn immed.
b.P. Text: undefined
decomp text: untested
vapor pres: nil
vapor density: nil
spec gravity: 1.22
solubility in water: negligible.
appearance and odor: pearlescent paste w/pungent odor
corrosion rate: na
product id: hysol ea 9314na qt system, as9265016
cage: 33564
company name: dexter corporation adhesive & coating systems
street: 2850 willow pass road
po box: 312
city: bay point ca
zipcode: 94565-3299
health emergency phone: 800-424-9300(chemtrec)
label required ind: y
date of label review: 10/12/1999
status code: a
origination code: g
hazard and precautions: brief contact may irrit skin or cause a rash. Repeated
or prolonged skin contact may result in allergic sensitization.
carcinogenicity note: bisphenol a/epichlorohydrin epoxy resin has exhibited
mutag enicity in bacteria.
=======================================================
responsible party cage: 33564
trans id no: 113875
product id: hysol ea 9314na qt system, as9265016
msds prepared date: 03/01/1992
review date: 06/09/1997
mfn: 5
multiple kit number: 0
kit part ind: y
review ind: y
unit of issue: kt
container qty: 0
=======================================================
stability indicator: yes
stability condition to avoid: avoid mixing parts a&b in batches >0.5 lb &
heating mixture >75f.
materials to avoid: strong oxidizing agents, strong lewis or mineral acids.
hazardous decomposition products: co, nox, aldehydes, acids & undetermined
organics.
hazardous polymerization indicator: no
conditions to avoid polymerization: polymerization not likely
spill release procedures: wear protective clothing, gloves & safety
glasses. Scrape up or shovel into dot approved waste containers.
waste disposal methods: not rcra haz waste.However, incineration in epa
approved waste incinerator is preferred.Chem additions/ processing/otherwise
altering matl may make waste management infor herein incomplete/inaccurate/
inappropriate.Consult state/loc regulations.
handling and storage precautions: refrigerated storage is recommended to
maintain product quality. This product may be stored @ room temp (77f) for up
to 12 months.
other precautions: follow curing schedule as recommended in product
literature.Don't cut/grind/weld/drill on/near container.Avoid mixing parts
a&b in batches >1lb unless plan to use immed.Don't heat mixed adhesive
>75f unless curing surfaces to be bonded.
ld50 lc50 mixture: mixture has not been tested as a whole.
route of entry inds - inhalation: yes
skin: yes
ingestion: no
carcinogenicity inds - ntp: no
iarc: no
osha: no
effects of exposure: material is corrosive to eyes & skin. Brief contact
may cause chemical burns. Vapors & mists will irritate nose & throat.
repeated or prolonged skin contact may result in burns and possible allergic
s ensitization.
explanation of carcinogenicity: per msds neither this material nor any of its
components is considered a carcinogen.
signs and symptions of overexposure: skin & eye irritation. Chest
discomfort.
medical cond aggravated by exposure: skin sensitization.
first aid: eye: flush w/lots of running water for 15 mins. Get med attn immed.
skin: wash thoroughly w/soap & water. If irrit persists get med attn.
inhal: remove victim to fresh air. If symptoms persist get med attn. Ingest:
drink plenty of water. Get med attn immed.
b.P. Text: 644f,340c
vapor pres: not tested
vapor density: not tested
spec gravity: not tested
ph: notest
voc grams/liter: 10
solubility in water: negligible
appearance and odor: gray paste
corrosion rate: na
product id: hysol ea 9314na qt system, as9265016
cage: 33564
company name: dexter corporation adhesive & coating systems
street: 2850 willow pass road
po box: 312
city: bay point ca
zipcode: 94565-3299
health emergency phone: 800-424-9300(chemtrec)
label required ind: y
date of label review: 10/12/1999
status code: a
origination code: g
hazard and precautions: material is corrosive to eyes & skin. Brief contact
may cause chemical burns. Vapors & mists will irritate nose & throat.
repeated or prolonged skin contact may result in burns and possible allergic
s ensitization.
=======================================================
responsible party cage: 33564
trans id no: 113876
product id: hysol ea 9314na qt system, as9265016
msds prepared date: 01/01/1995
review date: 03/06/1997
mfn: 6
multiple kit number: 0
kit part ind: y
review ind: y
unit of issue: kt
container qty: 0
=======================================================
stability indicator: yes
stability condition to avoid: don't mix batches a&b >1lb unless used
immediately. Don't heat mixed adhesive unless curing surfaces to be bonded.
materials to avoid: strong oxidizing agents, strong lewis or mineral acids.
hazardous decomposition products: co, nox, aldehydes, acids & undetermined
organics.
hazardous polymerization indicator: yes
spill release procedures: wear protective clothing, gloves & safety
glasses. Absorb spill with absorbent material such as vermiculite or sand.
scrape up or shovel into dot approved waste containers.
waste disposal methods: matl not rcra haz waste. However, incineration in epa
approved waste incinerator preferred. Chem additions/processing/otherwise
altering matl may make waste mgmt info herein incomplete/inaccurate/inap
propriate.Consult state/local regs.
handling and storage precautions: refrigerated storage recommended to maintain
product quality. Product may be stored at room temp, 77f, up to 12 months.
other precautions: follow curing schedule as recommended in product literature.